Samsung TEU-F01, TEU-F04, TEU-F16, TEC-F04, TEC-F16 Specsheet

...

Ethernet-over-Copper Extender With Pass-Through PoE

TEC-F / TEC-U Series

-40º TO +75º

EXTENDER

PASS-THRU

The Ethernet over copper TEC-F / TEC-U Series supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10/100Mbps, and 1-pair or 4-pair (UTP) settings.

FEATURES

››Transmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable

››Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable

››Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable

››Extended temperature operation from -40°C to +75°C

››Extended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet

››Full 10/100 Mbps Bandwidth

››Supports Multicast, Unicast and Jumbo Frame

››Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance

››Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards

››User-selectable data rate for maximum bandwidth and transmission distance utilization

››Complies with all major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPs

››Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low- line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.

››LED status indicators confirm operating status

››Available in small-size, standard interchangeable stand alone or 1RU high rack mounted models

APPLICATIONS

››Retrofit existing analog CCTV installations to Ethernetbased systems

››CCTV systems for casinos, airports, school campuses

Samsung TEU-F01, TEU-F04, TEU-F16, TEC-F04, TEC-F16 Specsheet

TEC-F / TEC-U Series

SPECIFICATIONS

Ethernet-over-Copper Extender With Pass-Through PoE

Ethernet		Mechanical
Data Interface	10/100BaseT(X) Ethernet	LED Indicators	Operating Power
Data Rate	DIP-switch selectable 10/100Mbps		Ethernet Link/Activity
	Full data rate / full duplex up to the maximum		Extended Link/Activity
	rated distance	Circuit Board	Meets IPC Standard
RFC	2544 TCP/IP Packet Transmission	Size (L×W×H)	1 CH: 3.3 × 2.5 × 1.1 in (8.4 × 6.4 × 2.8 cm)
Standards	IEEE 802.3af PoE,		4 CH: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
	RFC: 768 UDP, 2068 HTTP, 793 TCP		16 CH: 6.1 × 19 × 1.75 in (15.5 × 48.26 × 4.45 cm)
	791 IP, 1783 TFTP, 894 IP over Ethernet.	Number of Rack Slots	1 (4CH Version Only)
Transmission Distances¹	See chart below	Shipping Weight	1 CH: <1 lbs./0.5 kg
Connectors			4 CH: <2 lbs./0.9 kg
Connectors			16 CH: <5 lbs./2.3 kg
Ethernet	RJ-45		16 CH: <5 lbs./2.3 kg
Ethernet	RJ-45
Extended Distance	Coaxial (C): female BNC	Environmental
	Ethernet (U): RJ-45	MTBF	>100,000 hours
Operating Power	Powered by PoE or 2-pin screw terminal for	Operating Temp	– 40˚ C to +75˚ C
	local power		UL Safety certifications conducted at maximum
Power			ambient temperatures (Tma) of 65ºC.
Power		Storage Temp	– 40˚ C to +80˚ C
Pass-Through Mode	1 CH: Operates on PoE power	Storage Temp	– 40˚ C to +80˚ C
Pass-Through Mode	1 CH: Operates on PoE power	Relative Humidity	0% to 95% (non-condensing)²
	or optional 9 to 36 VDC or 24 VAC, 1.5 W	Relative Humidity	0% to 95% (non-condensing)²
	or optional 9 to 36 VDC or 24 VAC, 1.5 W
	4 CH: 9 to 15 VDC, 5W
	16 CH: 9 to 15 VDC, 20W	AGENCY COMPLIANCE
Current Protection	Automatic Resettable Solid-State Current Limiters
Current Protection	Automatic Resettable Solid-State Current Limiters

ORDERING INFORMATION

Model Name	Description		Position	Channels	Form Factor	Cable
TEC-F01	1	Port Ethernet-over-Coax Extender	Local/Remote Configurable	1	Small Size	Coax
TEU-F01	1	Port Ethernet-over-UTP Extender	Local/Remote Configurable	1	Small Size	UTP
TEC-F04	4	Port Ethernet-over-Coax Extender	Local/Remote Configurable	4	Standard (1 Slot)	Coax
TEU-F04	4	Port Ethernet-over-UTP Extender	Local/Remote Configurable	4	Standard (1 Slot)	UTP
TEC-F16	16 Port Ethernet-over-Coax Extender		Local	16	1 RU 19” Rack Mount	Coax
TEU-F16	16 Port Ethernet-over-UTP Extender		Local	16	1 RU 19” Rack Mount	UTP
Accessories:	Unit-appropriate power supply (one each provided with each extender unit, for benign 0 to 50ºC applications only. Hardened power supply available)
Options	DIN-Rail Mounting Adaptor Kit - With Mounting Hardware (Optional, order model SBP-UDR) (Suitable for 1CH and 4CH units only)
	SBP-C14 / SBP-C03 Card Cage Racks

[1]Distance figures are based on a 50 V PSE PoE power source, and external power supplies for the extenders. Distance figures are obtained using in-house testing mirroring installations. Factors such as coaxial and copper cable quality, the number of connectors and splices in the cable run, the use of PoE, and environmental conditions encountered within the installation might affect the actual transmission distance and should be taken into consideration. Due to advanced negotiation signaling required in IEEE802.3at

applications, pass-through applications are limited to IEEE802.3af PD devices only. When using UTP models Pass-Through PoE is only possible in 4-pair mode.

+ 1 hidden pages