Samsung TC-9015VP User Manual

Operating
Instructions

TC-9015VP

❈

FOR HOUSEHOLD USE ONLY

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING

To reduce the risk of fire, electric shock, of injury:

1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before
servicing.

2. Do not use outdoors or on wet surfaces.

3. Do not allow to be used as a toy. Close attention is necessary when used by or near children.

4. Use only as described in this manual. Use only manufacturer’s recommended attachments.

5. Do not use with damaged cord or plug. If appliances is not working as it should, has been
dropped, damaged, left out door, or dropped into water, return it to a service center.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around

6.
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces

7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

8. Do not handle pulg or appliance with wet hands.

9. Do not put any object into openings. Do not use with any opening blocked ; keep free of
dust, lint, hair, and anythin that may reduce air flow.

10. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

11. Do not pick up anything that is burrning or smoking, such as cigarettes, matches, or hot ashes.

12. Do not use without dust bag and filters in place.

13. Turn off all controls before unplugging.

14. Use extra care when cleaning on stairs.

15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas

where they may be present.

16. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.

17. This hose contains electrical connections.

18. Do not use to suck up water.

19. Do not immerse in water for cleaning.

20. The hose should be checked regularly and must not be used of damaged.

The plug must be removed from the socket - outlet before cleaning or maintaining the appliance.

21.

22. If the supply cord is damaged, it must be replaced by a special cord or assembly available

from the manufacturer or its service agent.

.

1

HANDLE

SUCTION HOSE

CORD REWIND
BUTTON

POWER CONTROL
SWITCH

ON / OFF BUTTON

TOOL ST ORA GE
COVER

CLAMPER FOR DUST BAG
COMPARTMENT

BUTTON FOR SUCTION
HOSE REMOVAL

DUST-FULL
INDICATOR

HANGER

TUBE

RUG / FLOOR SELECT OR

FLOOR NOZZLE

IDENTIFICATIONS PARTS

If the “Dust - Full” indicator switches to “RED” while you are cleaning, the dust bag requires
relacement.

NOTE

If the “Dust - Full” indicator continues to display “RED” even after changing
the dust bag turn the cleaner off and check whether the hose, tube or nozzle
is clogged.

DUST -FULL INDICAT OR

2

ASSEMBLING THE VACUUM-CLEANER READY FOR USE

1) Connect the suction hose to the suction
tube.

3) Connect the nozzle to the suction tube.

POWER CORD

1) PULLING OUT

The power cord is long enough to be
drawn out for a convenience.

2) Connect the suction tubes together.

4) Connect the hose clamper to the body
of the clamper along the arrow point.

2) REWINDING

Upon finishing cleaning disconnect the plug
from the electrical outlet and just press the
cord rewind the button lightly with your toe.

NOTE

When removing the power cord from the electrical outlet, grasp the plug, not the cord.

ON / OFF SWITCH

With the cord plugged into an electrical
outlet, start or stop the vacuum cleaner by
stepping lighty on the switch button.

3

The suction power can be adjusted with the

MAX

MIN

electrical power control to suit any situation.

MIN = For delicate fabrics, like net curtains.
MAX = For hard floors and heavily soiled carpets.

USING THE ACCESSORIES



Dusting brush - for furniture, shelves,books,
etc.



Upholstery brush - for cushions and drapery.



Crevice tool - for radiators, crevice, corners,
between cushions.



Brush head ­The rotating brush ensures that cleaning is
carried out more thoroughly.

POWER CONTROL

SLIDING REGULATOR

OPEARATING THE BRUSH HEAD

Push the switch(A) down.
(The brush switches on)

Located in the top rear side of the vacuum
cleaner, there is a support for a convenient park
position during pauses when using the nozzle.

4

A

PARK POSITION

TRANSPORTING AND STORING THE VACUUM CLEANER

For easy storage and transportation, this
vacuum cleaner has a clip system built onto
the body, which will keep the tube, hose
and nozzle in a vertical position.

REPLACING THE DUST BAG

1)

To open the dust cover of the dust bag

compartment press the clamper upward
located at the side of the dust cover.

3)

After removing the used dust bag, insert

the cardboard bag collar of the new dust
bag in to the suction inlet to the full.

2) Remove the dust bag from the cleaner.

4) Press the dust cover down gently until
the clamper relocks.

NOTE

NOTE

After using the cloth filter bag is
full, clean the cloth filter bag and
use it again.

BRUSH HEAD

You can change or clean the brush by removing
the cover, having first detached it with the 2 slides.

 Remove the brush from the plastic guides and

toothed belt and clean, or insert a new brush.
Do not lose the plastic guides, washers or springs.

5

Used dust bag can be sealed by
removing th film from the paper
and sticking the latter over the
suction opening.

The rubber lip under the brush head can be
removed if it requires cleaning or replacing.

 Lift the rubber lip in the middle and pull out of

the guides at one side.

The motor filter situated between the dustbag
and the motor wil gradually become dirty.
Each time you change the air outlet filter we
advise you to remove the motor filter and to
clean it by tapping to remove the dirt and then
replacing it in the vacuum cleaner.

REPLACING THE MICROFILTER

 The microfilter filters the air which comes out

from the vacuum cleaner.

 To open the filter cover, press down and pull it

simultaneously .

 Remove and replace the exhausted microfilter.
 Close the cover.

CARE OF MOTOR FILTER

PROBLEM CAUSE REMEDY

Motor does not start
Suction force is gradully

decreasing
Cord does not rewind fully

No voltage
Filter, nozzle, suction hose

or tube blocked.
Check that the cord is not

twisted or wound unevenly

6

TROUBLESHOOTING

Check cable, plug and socket.
Remove the object.

Pull the cord ot 2~3m & push
down the cord rewind button

This Vacuum cleaner is approved the following
EMC Directive : 89 /336/ EEC, 92/31/ EEC and 93 /68/EEC
EN 61000-3-2 : 1995, EN 55014 : 1993 and EN 55104 : 1995
Low Voltage Safety Directive : 73 /23/EEC and 93/68/EEC
IEC 335-1, IEC 335-2-2, EN 60335-1 and EN 60335-2-2

CODE NO.DJ68-40015E