How it Works
Samsung
Loading...
TC220
User Manual
100 pgs5.69 Mb0
Table of contents
Loading...

Samsung TC220 User Manual

User manual
SyncMaster
TC220W
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00182A-03

Copyright

The contents of this manual are subject to change without notice to improve quality.
© 2011 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.

Before Using the Product

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
z An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e, where you have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product
(i.e, where you have failed to read this user manual).
z The amount of such administration charge will be advised to you before any work or home visit is
carried out.
2
Before Using the Product

Icons used in this manual

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Symbols for safety precautions

Warning
Caution
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
3

Cleaning

!
Before Using the Product

Cleaning

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cable from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
z Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!
z Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.
5. Connect the power cable to the product after cleaning the product.
6. Power on the monitor and computer.
4
Before Using the Product
10 cm
10 cm 10 cm
10 cm
10 cm

Securing the Installation Space

z Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.

Precautions for storage

High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Be sure to contact Samsung Customer Service Center (page91) if the inside of the monitor needs
cleaning. (Service fee will be charged.)
5
Before Using the Product
!
!
!

Safety Precautions

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cable or plug, or a loose power socket.
z An electric shock or fire may result.
Do not plug many products into the same power socket.
z Otherwise, the socket may overheat and cause a fire.
Do not touch the power cable with wet hands.
z Otherwise, an electric shock may result.
Insert the power cable all the way in so it is not loose.
z An unstable connection may cause a fire.
Ensure you connect the power cable to a grounded power socket. (type 1 insulated devices only).
z An electric shock or injury may result.
Do not bend or pull the power cable with force. Do not weigh the power cable down with a heavy object.
z A damaged power cord may cause an electric shock or fire.
Do not place the power cable or product near heat sources.
z An electric shock or fire may result.
If the power cable pins or power outlet is covered with a foreign substance (dust, etc.), wipe it off using a dry cloth.
z Otherwise, a fire may result.
6
Before Using the Product
!
!
!
!
Caution
Do not unplug the power cable when the product is in use.
z The product may become damaged by an electric shock.
Do not use the power cable for products other than authorized products supplied by Samsung.
z An electric shock or fire may result.
Keep the power socket where the power cable is connected unobstructed.
z If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Power to the product cannot be completely cut off with the power switch.
Hold the plug when disconnecting the power cable from the power socket.
z An electric shock or fire may result.

Installation and Safety

Warning
Do not place candles, insect repellants or cigarettes on top of the product. Do not install the product near heat sources.
z Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.
z Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached by children.
z Children may suffocate.
7
Before Using the Product
!
!
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).
z The product may fall and break or cause a personal injury.
z Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
z An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
z Otherwise, the product lifespan may be reduced, or a fire may result.
Caution
Do not install the product within the reach of young children.
z The product may fall and injure children.
Take care not to drop the product when moving it.
z Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
z The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
z The product may fall and break or cause a personal injury.
z Install the product only on cabinets or shelves of the right size.
8
Before Using the Product
!
SAMSUNG
!
!
!
Put down the product carefully.
z The product may fall and break or cause a personal injury.
Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
z Be sure to consult Samsung Customer Service Center (page91) before
installation if you want to install the product at such a place.

Operation and Safety

Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
z An electric shock or fire may result.
z Contact Samsung Customer Service Center (page91) for repair.
Before you move the product, be sure to turn off the power switch and remove all the cables connected to the product, including the power cable and the antenna cable.
z Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the power cable immediately and contact Samsung Customer Service Center (page91).
z An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
z The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the power cable, and contact Samsung Customer Service Center (page91).
z Otherwise, an electric shock or fire may result.
9
Before Using the Product
!
!
!
GAS
!
Do not put a heavy object, toy, or sweets on top of the product.
z The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
During a lightning or thunderstorm, do not touch the power cable or antenna cable.
z An electric shock or fire may result.
Do not drop objects on the product or apply impact.
z An electric shock or fire may result.
Do not move the product by pulling the power cable or any cable.
z Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power cable. Also, ventilate the area immediately.
z Sparks can cause an explosion or fire.
z During a lightning or thunderstorm, do not touch the power cable or antenna
cable.
Do not lift or move the product by pulling the power cable or any cable.
z Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the product.
z An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
z Otherwise, a fire may result from an increased internal temperature.
10
Before Using the Product
100
!
-_-
!
!
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.
z If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center (page91).
z Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
z If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center (page91).
z Product failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
z If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cable from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
z Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
z Your eyesight may deteriorate.
Do not put DC power adapters together.
z Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
z Otherwise, a fire may result.
11
Before Using the Product
!
!
!
!
Do not let water enter the DC power adapter or get the adapter wet.
z An electric shock or fire may result.
z Avoid using the product outdoors where it can be exposed to rain or snow.
z Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
z Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
Do not hold the monitor upside-down or move it by holding the stand.
z The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
z An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
z Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
12
Before Using the Product
!
Exercise caution when adjusting the product angle or stand height.
z Otherwise, children's fingers or hands may become stuck and injured.
z Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
z Product failure or personal injure may result.

Correct posture to use the product

Use the product in the correct posture as follows:
z Straighten your back.
z Allow a distance of 45 to 50cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
z Adjust the angle so light does not reflect on the screen.
z Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
z Keep your elbows at about a right angle.
z Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
13

Table Of Contents

BEFORE USING THE
PRODUCT
PREPARATIONS 19 Checking the Contents
2 Copyright
3 Icons used in this manual 3 Symbols for safety precautions
4 Cleaning
4 Cleaning 5 Securing the Installation Space 5 Precautions for storage
6 Safety Precautions
6 Electricity and Safety 7 Installation and Safety 9 Operation and Safety
13 Correct posture to use the product
19 Removing the Packaging 20 Checking the Components
USING "WINDOWS
EMBEDDED STANDARD 7"
21 Parts
21 Frontal Buttons 23 Side View
24 Installation
24 Attaching the Stand 25 Adjusting the Product Tilt and Height 25 Rotating the Monitor 26 Installing a Wall-mount Kit or Desktop Stand 27 Anti-theft Lock
28 What is "Windows Embedded Standard
7" Client?
29 Connection to Use "Windows Embedded
Standard 7"
29 LAN Connection 29 Connecting USB Devices
Table Of Contents
14
Table Of Contents
30 Using "Windows Embedded Standard 7"
30 Logon 30 "Windows Embedded Standard 7" Desktop 31 Programs 38 Configuring Utilities 39 Recover the System
CONNECTING AND USING
A SOURCE DEVICE
SCREEN SETUP 50 Brightness
40 Before Connecting
40 Pre-connection Checkpoints
41 Connecting and Using a PC
41 Connecting to a PC 42 Driver Installation 43 Setting Optimum Resolution 44 Changing the Resolution Using a PC
47 Connecting to a Video Device
47 Connecting an External Monitor 48 Connecting to Headphones 48 Connecting a Microphone
49 Connecting the Power
50 Configuring Brightness
51 Contrast
51 Configuring Contrast
52 Sharpness
52 Configuring Sharpness
53 SAMSUNG MAGIC Bright
53 Configuring SAMSUNG MAGIC Bright
54 SAMSUNG MAGIC Angle
54 Configuring SAMSUNG MAGIC Angle
55 Coarse
55 Adjusting Coarse
Table Of Contents
15
Table Of Contents
56 Fine
56 Adjusting Fine
CONFIGURING TINT 57 SAMSUNG MAGIC Color
57 Configuring SAMSUNG MAGIC Color
58 Red
58 Configuring Red
59 Green
59 Configuring Green
60 Blue
60 Configuring Blue
61 Color Tone
61 Configuring the Color Tone Settings
62 Gamma
62 Configuring Gamma
RESIZING OR
RELOCATING THE
SCREEN
63 H-Position & V-Position
63 Configuring H-Position & V-Position
64 Image Size
64 Changing the Image Size
65 Menu H-Position & Menu V-Position
65 Configuring Menu H-Position & Menu V-
Position
SETUP AND RESET 66 Reset
66 Initializing Settings (Reset)
67 Language
67 Changing the Language
68 Eco Saving
68 Configuring Eco Saving
Table Of Contents
16
Table Of Contents
69 Clock
69 Configuring Clock
70 Off Timer
70 Configuring Off Timer
71 On Timer
71 Configuring On Timer
72 On Timer Source
72 Configuring On Timer Source
73 On Timer Volume
73 Configuring On Timer Volume
INFORMATION MENU AND
OTHERS
INSTALLING THE
SOFTWARE
74 Customized Key
74 Configuring Customized Key
75 Display Time
75 Configuring Display Time
76 Menu Transparency
76 Changing Menu Transparency
77 INFORMATION
77 Displaying INFORMATION
77 Configuring Volume in the Initial Screen
78 Natural Color
78 What is Natural Color?
79 MultiScreen
79 Installing the Software 80 Removing the Software
TROUBLESHOOTING
GUIDE
81 Requirements Before Contacting
Samsung Customer Service Center
81 Testing the Product 81 Checking the Resolution and Frequency 81 Check the following.
Table Of Contents
17
Table Of Contents
84 Q & A
SPECIFICATIONS 86 General
88 PowerSaver
89 Standard Signal Mode Table
APPENDIX 91 Contact SAMSUNG WORLDWIDE
96 Correct Disposal
96 Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
96 Correct disposal of batteries in this product
INDEX
97 Terminology
Table Of Contents
18

Preparations

1

1.1 Checking the Contents

1.1.1 Removing the Packaging

1 Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2 Remove the styrofoam from the product.
3 Check the components and remove the styrofoam and plastic bag.
z The appearance of actual components may differ from the image shown.
z This image is for reference only.
4 Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
19
1
Preparations

1.1.2 Checking the Components

z Contact the dealer from whom you purchased the product if any item is missing.
z The appearance of the components and items sold separately may differ from the image shown.
Components
Quick setup guide Warranty card
(Not available in all locations)
Power cable DC power adapter Stand base
Components may vary depending on the country.
Items sold separately
The following items can be purchased at your nearest retailer.
LAN cable D-SUB cable USB cable
User manual
RS-232C cable Stereo cable Mouse (USB)
Keyboard Headphone
1 Preparations
20
Preparations
AUTO
VOL
VOL
MENU
MENU
SAMSUNG
MAGIC
SAMSUNG
MAGIC
→
1

1.2 Parts

1.2.1 Frontal Buttons

The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Icons Description
Open or close the onscreen display (OSD) menu, or return to the parent menu.
z Key Lock
This function locks the buttons on the front of the product to prevent
the current settings from being changed by others.
MENU
Lock: Press and hold the [ ] button for 5 seconds. The key
lock mode will be enabled.
Unlock: Press and hold the [ ] button for 5 seconds when the
key lock is enabled. The key lock mode will be disabled.
When the key lock mode is enabled, all the buttons on the front
of the product are disabled.
Configure Customized Key and press [ ]. The following options will be enabled.
Angle - Bright - Eco Saving - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the OSD menu.
1 Preparations
21
1
AUTO
AUTO
Preparations
Icons Description
When OSD is not on the screen, push the button to adjust volume.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will change the input source (Digital/Analog). If you power on the product or
change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
Press the [ ] button to automatically adjust the screen settings.
z Available only in Analog mode.
z Changing the resolution in Display Properties will activate the
Auto Adjustment function.
(Power lamp)
Speaker
OSD Guide
Use this button for turning the Display on and off.
The power indicator will be lit when the product is operating normally.
z Refer to "11.2 PowerSaver" for details about the power-saving
function.
z To reduce power consumption. it is best to remove the power
cable when you will not be using the product for an extended period of time.
If the 11th digit of the model code is M, the model has internal
speakers.
E.g,) LF22NEBHBNMEN
Press one of the buttons on the monitor, OSD Guide will appear on the screen.
If you press a button on the front of the monitor, an OSD Guide will display showing the function of the button before the menu for the pressed button appears.
To go to the menu, press the button on the front of the monitor again.
OSD Guide may vary according to functions and models. Please refer to actual product.
1 Preparations
22
1
RGB IN RGB OUT DC 14V/15V LAN
MICAUDIO IN
SERIAL
Preparations

1.2.2 Side View

The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port Ports
[RGB IN] - Connects to a PC device using the D-SUB cable.
[RGB OUT] - Connects to a Monitor device using the D-SUB cable.
Connects to the DC power adapter.
Connect to a network using the LAN cable.
Receives sound from a PC via an audio cable.
[MIC]
[]
Connect to a microphone.
Connect to an audio output device such as headphones.
Connect to another monitor using the RS232C cable.
USB memory device port
1 Preparations
23
Preparations
1

1.3 Installation

1.3.1 Attaching the Stand

Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion.
Fasten the screw tightly (using a screwdriver or coin) into the bottom of the stand base.
Insert the stand base into the stand in the direction of the arrow.
After installing the stand, place the product upright.
Do not remove the fixing pin until you are finished attaching the stand.
You can remove the fixing pin and adjust the stand now.
- Caution
Do not hold the product upside down only by the stand.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
24
1
2°(±1°) ~ 25°(±1°)
Preparations

1.3.2 Adjusting the Product Tilt and Height

The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
z To adjust the height, remove the fixing pin.
z The monitor tilt and height can be adjusted.
z Hold the top center of the product and adjust the height carefully.

1.3.3 Rotating the Monitor

You can rotate your monitor as shown below.
z Be sure to fully extend the stand before rotating the monitor.
z If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the
floor and get damaged.
z Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations
25
1
1
A
2
B
3
4
A
B
Preparations

1.3.4 Installing a Wall-mount Kit or Desktop Stand

Before Installation
Power the product off and remove the power cable from the power socket.
Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion.
Installing a Wall-mount Kit or Desktop Stand
Unfasten the screw from the back of the product.
Lift and detach the stand.
Attach the wall-mount kit or desktop stand here
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
1 Preparations
26
1
Preparations
Notes
z Using a screw longer than the standard length can damage the internal components of the
product.
z The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
z Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal injury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force.
z Samsung shall not be held liable for any product damage or personal injury caused by using a wall-
mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
z To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.
z Be sure to use a wall-mount kit that complies with the standards.

1.3.5 Anti-theft Lock

An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
To lock an anti-theft locking device:
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk. 2 Put one end of the cable through the loop on the other end. 3 Insert the locking device into the anti-theft lock slot at the back of the product. 4 Lock the locking device.
z An anti-theft locking device can be purchased separately.
z Refer to the user guide provided with your anti-theft locking device for details.
z Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
27

Using "Windows Embedded Standard 7"

2

2.1 What is "Windows Embedded Standard 7" Client?

The Microsoft Windows Embedded Standard 7 (WES7) client uses the Microsoft Windows
Embedded Standard 2011 OS. When the WES client is connected to a server where Citrix
XenDesktop, VMWare View Client, or Microsoft Remote Desktop Connection service is available,
the keyboard, mouse, audio/video, and display data will be forwarded to the client through the network
between the client and server.
Connectable Servers
z A Citrix XenDesktop Server
Microsoft Windows 2000/2003/2008 Server where the Terminal Service and Citrix
XenServer are installed
z A VMWare View Client Server
Microsoft Windows 2000/2003/2008 Server where the Terminal Service and VMWare
Server are installed
z A Microsoft RDP (Remote Desktop Protocol) Server
Microsoft Windows 2000/2003/2008 Server where the Terminal Services are installed
Microsoft Windows 7 Professional
This manual describes the functions provided by the WES Client. However, it does not explain general
functionalities of WES. For more general information on Windows 7, refer to Windows 7 Help provided
by Microsoft.
2 Using "Windows Embedded Standard 7"
28
Using "Windows Embedded Standard 7"
LAN
2

2.2 Connection to Use "Windows Embedded Standard 7"

2.2.1 LAN Connection

1 Connect the LAN cable to [LAN] on the back of the product.

2.2.2 Connecting USB Devices

z It is not supported when the network speed is below or equal to 10Mbps.
z Use Cat5(*STP Type) cable for the connection.
*Shielded Twist Pair
1 Connect a USB device (keyboard, mouse, etc.) to [ ] on the back of the product.
The [ ] port supports USB 2.0.
2 Using "Windows Embedded Standard 7"
29
Using "Windows Embedded Standard 7"
▶
2

2.3 Using "Windows Embedded Standard 7"

2.3.1 Logon

When the client starts, you can logon to the server by entering your username and password. The default
usernames already configured are ‘Administrator’ and ‘User’, and their passwords are a space.

2.3.2 "Windows Embedded Standard 7" Desktop

User
When you log in, the User Desktop appears. The default icons that appear on the User Desktop are
Recycle Bin, Computer, Citrix Online Plug in, VMWare View Client, Remote Desktop Connection
and Internet Explorer. You can also run this connection from the Start menu. The audio volume icon
and system time are displayed on the User Taskbar.
When logged on as a user, there are many restrictions that protect the system from incorrect user
actions. You cannot access the system drives and there are restrictions on configuring properties for
them. To configure the client’s advanced and detailed settings, log on as an administrator.
Administrator
If you logon as Administrator, the Administrator Desktop appears. The default icons that appear on the
Administrator Desktop are Recycle Bin, Computer, Citrix Online Plug in, VMWare View Client,
Remote Desktop Connection and Internet Explorer. You can also run the Citrix Online Plug in,
VMWare View Client, Remote Desktop Connection, and Internet Explorer from the Start menu. The
audio volume icon, Enhanced Write Filter status icon, and system time are displayed on the
Administrator Taskbar. The Administrator privilege is required for adding and removing programs.
Log off, Restart, Shut down
z To log off the current session, shut down or restart your client, use the Start menu. [Start Shut
down]. The Shut Down Windows dialog box is displayed. To shut down the client immediately,
select [Start Shut down]. To select Log off, Restart, etc., move the mouse over the icon
next to [Shut down]. Alternatively, you can perform Log off or Shut down using the Windows
Security Dialog box by pressing [Ctrl + Alt + Del]. If ‘Force Auto Log on’ is activated, you will be
immediately logged on after each log off.
z The Client Log off, Restart and Shut down take effect on the operations of the EWF (Enhanced
Write Filter). To keep the changed system configuration, you must save a cache for the current
system session into flash memory. Failing to do so will cause the changed configuration to be lost
when the client is shutdown or restarted. (In the case of logging off, the configuration is remembered
when loggin in again.) For more information on the Enhanced Write Filter, refer to the Program
Help.
2 Using "Windows Embedded Standard 7"
30
Loading...
+ 70 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use