Samsung SPH-20W-P, SWH-20W-P User Manual

SAMSUNG CCTV SYSTEMS

SPEED DOME OUTDOOR HOUSINGS

INSTRUCTION MANUAL

SPH-20W/P SWH-20W/P

SAMSUNG TECHWIN CO., LTD

OPTICS & DIGITAL IMAGING DIV. 145-3, SANGDAEWON 1-DONG, JUNGWON-GU,SUNGNAM, KYUNGKI-DO, KOREA 462-703

TEL :82-31-740-8137~41 FAX: 82-31-740-8145

SAMSUNG OPTO-ELECTRONICS AMERICA, INC.

40 SEAVIEW DIRVE, SECAUCUS N.J 07094, U.S.A. TEL : (201)902-0347 FAX:(201)902-0429

www.samsungcctv.com www.samsungtechwin.com

삼성테크윈주식회사

OUTDOOR DOME HOUSINGS

Contents

SAFETY PRECAUTIONS

.......................................................................

UNPACKING

...........................................................................................

IMPORTANT SAFEGUARDS

..................................................................

FEATURE

...............................................................................................

ELECTRICAL SPECIFICATIONS

............................................................

GENERAL INSTRUCTIONS

....................................................................

INSTALLING QUICK RELEASE BRACKET AND UNITIZED CAMERA ASSEMBLY

............................................................................

INSTALLING THE HOUSING ASSEMBLY

..............................................

FOR WALL MOUNT VERSIONS

..........................................................

FOR PENDANT MOUNT VERSIONS

..................................................

WIRING COLOR CODE

..........................................................................

EXPLODED VIEWS OF HOUSING

........................................................

MOUNTING TEMPLATE

.........................................................................

DIMENSIONS

.........................................................................................

WARRANTY CARD

................................................................................

Outdoor Housing for Speed Dome Camera (SPD-1600, SPD-2500)

Wall Mount Type.

SPH-20W

Outdoor Housing for Speed Dome Camera (SPD-1600, SPD-2500)

Pendant Mount Type.

SPH-20P

Outdoor Housing for Web Speed Dome Camera (SWC-160, SWC-250) Wall Mount Type.

SWH-20W

Outdoor Housing for Web Speed Dome Camera (SWC-160, SWC-250) Pendant Mount Type.

SWH-20P

EXPLANATION OF MODEL NAME

OUTDOOR DOME HOUSINGS

SAFETY PRECAUTIONS

UNPACKING



RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of non-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper.

Be sure to save:

1. The shipping carton and packaging material. They are the safest material in which to make future shipments of the equipment.

2. These Installation and Operating Instructions.

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instructions should be read before the unit is operated.

2. Retain Instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to.

4. Follow Instructions - All operating and user instructions should be followed.

5. Electrical Connections - Only a qualified electrician should make electrical connections.

6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Cable Runs - All cable runs must be within permissible distance.

8. Mounting - This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight of the unit. Accordingly:

a. The installation should be made by a qualified installer. b. The installation should be in compliance with local codes. c. Care should be exercised to select suitable hardware to install the unit,

taking into account both the composition of the mounting surface and the weight of the unit. Be sure to periodically examine the unit and the supporting structure to make sure that the integrity of the installation is intact. Failure to comply with the foregoing could result in the unit separating from the support structure and falling, with resultant damages or injury to anyone or anything struck by the falling unit.

OUTDOOR DOME HOUSINGS

Durable engineered plastic top, 94VO, outdoor and pressurized models are UV protected.

Accepts many manufacturers’ unitized camera systems.

Accepts single fixed camera.

Available in wall or pendant mount.

Temperature rating -50 F standard.

DESCRIPTION:

All plastic components are designed to be UV stable; the housing top is rated at 94VO. The wall mountunit measures 11.5" (w) x12.9 (h) x 16" (d), with a weight of 7 lbs.; measurements for the pendant mount unit are 11.5" (w) x 12.9" (h) x 11.5" (d), 7 lbs. Flying leads are provided for all incoming power, control, and video connections. The leads are supplied with a standard BNC and screw down connectors. A 22 watt heater and a circulation blower are also provided. To service, remove the lower dome and ring assembly.

FEATURE ELECTRICAL SPECIFICATIONS:

Input power : Housing & Camera - 12 VDC 22 watts at 12 VDC

Heater : 20 watts Blower : 2 watts

GENERAL INSTRUCTIONS:

Tools Required: .100" Flat Head Screwdriver Phillips Head Screwdriver PREPARING PENDANT MOUNT BRACKET (For wall mount see page 7)

1. Carefully remove the housing from the packaging material. Check to be sure all parts are present.

2. This unit includes a 1 1/2" NPT housing coupling that can be used with a standard 1 1/2" NPT pipe.

3. Attach the housing coupling to the bracket or pendant pipe (Figure 1).

NOTE

Notes

·This unit can be used with brackets designed with

1 1/2" male pipe

threads that don’t be supplied.

·Pipe threads should be clean and rust free. Use a sealer (such as Teflon™ tape or silicone sealer) on the threads.

NOTE

Notes

·The heater activates at 40 F ( 8 F), deactivates at 60 F ( 8 F).

·The blower always activates.

Figure 1

Add thread sealing tape

Be sure the bracket is properly and securely mounted to a supporting structure capable of rigidly holding the weight of the entire unit.

OUTDOOR DOME HOUSINGS

1. Open the housing by loosening the (3) captive screws located on the housing ring next to the lower clear dome. Be careful not to back these all the way out. Twist the dome and ring assembly slightly in a counterclockwise motion to remove (Figure 2).

2. Install the pan/tilt unit quick-release bracket. It is recom- mended that this be done before installing the housing.

3. It is recommended that the unitized camera be installed at this time. Connect to the quick-release bracket and secure per manufacturer directions.

4. Clean the inside of the dome, with the text-wipe provided. Reattach the housing dome and secure the (3) captive screws. Do not overtighten the screws. Tighten only to the point at which the gap between the ring and the housing top closes.

Figure 2

Loosen screws only, do not remove

Remove dome by twisting counterclockwise

INSTALLING THE HOUSING ASSEMBLY

FOR WALL MOUNT VERSIONS

1. A wall mount bracket comes standard with this unit, and a template is included to use as a guide for mounting the bracket to a wall. Choose the desired location for installation and mark the drill holes using the template. Screw (2) bolts (not provided) about 3/4 of the way into the (2) top holes. Run approximately 8" of wiring out of the wall.

2. Open the access door on the bottom of the wall mount by loosening the screw nearest the mounting plate (Figure 3).

3. Slip the housing onto the top (2) bolts and pull the wires from the wall through the rectangular hole in the wall mount bracket. Screw bolts and washers through the bottom (2) holes and secure. Remove the top (2) bolts, add washers, and reattach, tightening completely.

4. Attach the wires from the wall to the connector provided, using the wiring color code chart as a guide.

5. Once all wiring connections are made, place the wires inside the wall mount bracket and close the access door. Secure with the screw removed earlier.

6. Clean the outside of the dome with the text wipe provided.

It is recommended that this be done before installing the housing.

INSTALLING QUICK RELEASE BRACKET AND UNITIZED CAMERA ASSEMBLY

Place for connectors

Figure 3

8-32 Security fastener

OUTDOOR DOME HOUSINGS

ETHERNET CONECTION (RJ45 CONNECTOR)

WIRING COLOR CODE POWER AND CONTROL INPUTS (SPH-20W/P)

10 RXD (RS232) Blue 11 TXD (RS232) Violet 12 S1 + Gray 13 S1 - Orange 14 S2 + Brown 15 S2 - Tan

RS232 & Digital Alarms

1 Accessory Power (24 VAC) Yellow 2 Accessory Power (24 VAC) Green 3 N/A 4 N/A

Housing (Power 24 VAC)

1 Camera Power (+12 VDC) Red 2 Camera Power (Ground) Black 3 SYNC (Camera Power) White 4 N/A

Camera (Power 12 VDC)

RS-485

1 Data + Gray 2 Data - Violet 3 Ground Blue 4 N/A

FOR PENDANT MOUNT VERSIONS

1. Mount the housing assembly to the mounting bracket and housing coupling. A safety cable is included with the housing to temporarily hold it while making wiring connections. Loop the safety cable over one of the set screws on the housing coupling and make the appropriate connections using the (2) screwdown connectors supplied.

2. Undo the safety cable and twist the housing onto the housing coupling. Secure all (3) setscrews provided on the housing coupling (Figure 4).

3. Clean the outside of the dome with the text wipe provided.

WIRING COLOR CODE POWER AND CONTROL INPUTS (SWH-20W/P)

Figure 4

Twist and Secure

1 Accessory Power (+12 VDC) Red 2 Accessory Power (Ground) Black 3 N/A

4 N/A

Housing (Power 12 VDC)

1 Camera Power (+12 VDC) Red 2 Camera Power (Ground) Black 3 SYNC (Camera Power) White 4 N/A

Camera (Power 12 VDC)

+ 12 hidden pages