Class II product : This symbol indicates that it does not require a safety connection to
electrical earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instruc tions for use : This symbol instructs the user to consult the user
manual for further safety related information.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK ). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it
from overheating, these slots and openings
must never be blocked or covered.
– Do not place this apparatus in a conned
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is
provided.
– Do not place this apparatus near or over
a radiator or heat register, or where it is
exposed to direct sunlight.
This symbol indicates
that important literature
concerning operation and
maintenance has been
included with this product .
– Do not place vessels (vases etc.)
containing water on this apparatus.
A water spill can cause a re or electric
shock.
• Do not expose this apparatus to rain
or place it near water (near a bathtub,
washbowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool,
etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer
immediately.
• Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in re or electric shock.
ENG - 2ENG - 3
• Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from
the apparatus.
• To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
set due to lightning and power line surges.
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
• To avoid electric shock, never touch the inside
of this apparatus. Only a qualied technician
should open this apparatus.
• Make sure to plug the power cord in until it is
rmly seated. When unplugging the power
cord from a wall outlet, always pull on the
power cord’s plug. Never unplug by pulling on
the power cord. Do not touch the power cord
with wet hands.
• If this apparatus does not operate normally
- in particular, if there are any unusual
sounds or smells coming from it - unplug it
immediately and contact an authorized dealer
or service centre.
• Maintenance of Cabinet.
– Before connecting other components to
this product, be sure to turn them off.
• Be sure to pull the power plug out of the
outlet if the product is to remain unused or
if you are leaving the house for an extended
period of time (especially when children,
elderly, or disabled people will be left alone in
the house).
– Accumulated dust can cause an electric
shock, an electric leakage, or a re by
causing the power cord to generate sparks
and heat or the insulation to deteriorate.
• Contact an authorized service centre for
information if you intend to install your
product in a location with heavy dust, high or
low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may cause serious damage to
your product.
• Use only a properly grounded plug and wall
outlet.
– An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
• To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power plug
must be readily accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (battery, etc.) in a
location safely out of the reach of children.
• Do not install the product in an unstable
location such as a shaky self, a slanted oor,
or a location exposed to vibration.
• Do not drop or strike the product. If the
product is damaged, disconnect the power
cord and contact a service centre.
• To clean this apparatus, unplug the power
cord from the wall outlet, and then wipe
the product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can
damage the appearance of the product or
erase the printing on the product.
• Do not expose this apparatus to dripping
or splashing. Do not put objects lled with
liquids, such as vases, on the apparatus.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a re.
WARNING :
• TO PREVENT THE SPREAD OF
FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• To reduce the risk of re or electric shock, do
not expose this appliance to rain or moisture.
Precautions
1. Ensure that the AC or DC power supply
in your house complies with the power
requirements listed on the identication
sticker located on the back of your product.
Install your product horizontally, on a
suitable base (furniture), with enough space
around it for ventilation (7~10 cm).
Make sure the ventilation slots are not
covered. Do not place the unit on ampliers
or other equipment which may become hot.
This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC
plug from the wall outlet.
2. Do not expose the unit to direct sunlight
or other heat sources. This could lead
to overheating and cause the unit to
malfunction.
3. Unplug the Power cord from the AC wall
socket if the unit malfunctions. Your product
is not intended for industrial use. It is for
personal use only. Condensation may occur
if your product has been stored in cold
temperatures. If transporting the unit during
the winter, wait approximately 2 hours until
the unit has reached room temperature
before using it.
4. If the electricity supplied to your home is
rated at 240V AC, use a suitable plug adapter
to connect this unit to your electrical outlets.
ENG - 4ENG - 5
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below. Keep these operating
instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not t into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where it exits the apparatus.
11. Only use attachments/accessories specied
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specied by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning
storms or when you intend to leave it unused
for long periods of time.
14. Refer all servicing to qualied service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Checking the Components
ID SET
POWER
LINK
SERVICE
POWER
+
Soundbar Sound
Subwoofer
Power CordWireless Dongle (WHM520V)
WIRELESS
Screw (2 E A)Holder-Dongle
(Sta nd Type)
(Wall mount Type / One Mount Type)
Holder-Dongle
• The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung
Soundbars, see page 11. Do not connect the dongle to any other devices, such as smartphones,
desk-top PCs, or notebook PCs.
Specications
Weight14.6 kg
Dimensions (W x H x D)320.0 X 338.3 X 320.0 mm
Operating Temperature Range+5°C to +35°C
Operating Humidity Range10% ~ 75%
SpeakerSubwoofer x 1, 254.0 mm, 4ohm
Wireless device output powerSRD max transmitter power25mW at 5.725GHz – 5.825GHz
NOTES
– Samsung Electronics Co., Ltd reserves the right to change the specications without notice.
– Weight and dimensions are approximate.
– For more information about the power supply and power consumption, refer to the label attached
to the product.
– Design and specications are subject to change without prior notice.
Open Source Licence Notice
• To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
ENG - 6ENG - 7
• This product uses some software programs which are distributed under the FreeRTOS Modied GPL.
GPL Software : FreeRTOS
FreeRTOS Modied GPL License
http://www.freertos.org/license.txt
Important Note About Service
• An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the
user manual has not been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user
manual has not been read).
• You will be informed of the administration fee amount before a technician visits.
Connecting the SWA-W700 to a Soundbar
1. Check the standby status after plugging into an electrical outlet
Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer
to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer
blinks. If the LED does not blink, refer to step 7 on page 10.
POWER
Blue blinking
SERVICE
LINK
POWER
ID SET
Bott om of the Wireles s Subwoofer
Front of th e Wireless Subwo ofer
• The main unit is heavy. Be careful not to pinch your ngers when pressing the ID SET button or
connecting the power cord on the bottom.
• The upper part of the subwoofer is prone to scratches. Handle it carefully.
Spea ker Unit
• Do not press on or strike the Speaker Unit on the
rear of the body. You can deform or damage the
speaker.
Rear of th e Wireless Subwo ofer
WIRELESS
WIRELESS
WIRELESS
VOL
SOUNDBAR
5 Sec
2. Connect the main unit of the Soundbar to the Wireless Dongle
Connect the wireless dongle to the “WIRELESS” port on the Soundbar main unit.
• When inserting the Wireless Dongle into the holder, make sure that the “WIRELESS” logo is
facing up, as shown in the pictures below.
1
WIRELESS
2
St and Ty pe
2
WIRELESS
1
Wall Mount Type
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
HW-MS7XX
One Moun t Type (WMN 300SB, not sup plied)
• Do not remove the wireless dongle from the main Soundbar.
The wireless dongle that comes with the product can be used with the optional Wireless Rear
Speaker Kit.
ENG - 8ENG - 9
WIRELESS
SOUNDBAR
3. Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button
on the main Soundbar.
BYE
• The images of the Soundbar shown on this page may differ from your Soundbar, depending on
the model.
4. Congure “ID SET” using the Soundbar’s remote control
Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears
on your Soundbar ’s display.
5 Sec
VOL
SET
5. Turn on the Soundbar
Turn on the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on
the main Soundbar.
ON
ID
ID SET LINK
6. Check if the LINK LED is solid blue (connection complete)
The LINK LED indicator stops blinking
and glows a solid blue when a
Stops blinking.
Glows blue.
Front of th e Wireless Subwo ofer
connection is established between the
Soundbar and the Wireless Subwoofer.
7. If the SWA-W700 does not connect, take the necessary steps
according to the LED Indicator’s status
LED statusAction
On
Blue
Blinking
Connected with
the Soundbar
Connection
standby status
-
Check if the Soundbar is turned on
Repeat steps 3 through 6.
Check if the Soundbar is turned on
1. Press the ID SET button on the
bottom of the Wireless Subwoofer
with a pen tip for 5~6 seconds until
the LINK LED indicator blinks (in
Blue).
RedOnConnection failure
SERVICE
LINK
ID SET
5 Sec
POWER
2. Repeat steps 3 through 6.
Others-ErrorsContact a Samsung Service Centre.
ENG - 10ENG - 11
Compatible Models
HW-MS550HW-MS55CHW-MS570HW-MS57C HW-MS560
HW-MS650HW-MS651HW-MS6500HW-MS6501HW-MS660
HW- MS6 61HW-MS6510HW-MS6511HW-MS750HW-MS751
HW- MS760HW-MS 761
• The model list is subject to change without further notice.
Hereby, Samsung Electronics, declares that this equipment is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://www.samsung.com go to Support > Search Product Support and enter
the model name. This equipment may be operated in all EU countries.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government ofce, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
For information on Samsung’s environmental commitments and product specic regulatory
obligations e.g. REACH visit:
samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
Sicherheitsinformationen
Vielen Dank, dass Sie sich für dieses Produkt (SWA-W700) entschieden haben.
ACHTUNG
GEFAHR ELEKTRISCHER
SCHLÄGE! GERÄT NICHT
ÖFFNEN!
Dieses Symbol weist auf
eine hohe Spannung im
Inneren des Geräts hin.
Das Berühren von Teilen
im Geräteinneren ist
gefährlich.
Produkt der Klasse-II: Dieses Symbol zeigt an, dass das Gerät keinen elektrischen
Erdungsanschluss (Masse) benötigt.
Wechsel spannung: Dieses Symbol zeigt an, dass es sich bei der mit diesem Symbol
gekennzeichneten Nennspannung um eine Wechselspannung handelt.
Gleichspannung: Dieses Symbol zeigt an, dass es sich bei der mit diesem Symbol
gekennzeichneten Nennspannung um eine Gleichspannung handelt.
Achtung! Gebrauchsanweisung beachten: Dieses Symbol weist den Benutzer an,
weitere sicherheitsrelevante Informationen der Gebrauchsanweisung zu entnehmen.
ACHTUNG: ZUR VERMEIDUNG VON
STROMSCHLÄGEN DARF DIESES GERÄT NICHT
GEÖFFNET WERDEN. IM GERÄTEINNEREN
BEFINDEN SICH KEINE VOM BENUTZER
ZU WARTENDEN TEILE. LASSEN SIE
REPARATUREN NUR VON QUALIFIZIERTEM
KUNDENDIENSTPERSONAL DURCHFÜHREN.
• Die Schlitze und Öffnungen im Gehäuse und
in der Rückwand oder im Boden sind für die
Belüftung erforderlich. Um den zuverlässigen
Betrieb des Geräts zu gewährleisten und es vor
Überhitzung zu schützen, dürfen diese Öffnungen
keinesfalls blockiert oder bedeckt werden.
– Stellen Sie das Gerät nicht in
abgeschlossene Räume wie z.B. in ein
Bücherregal oder einen Einbauschrank.
Dieser Einbau ist nur dann zulässig, wenn
für ausreichende Belüftung gesorgt wird.
– Außerdem darf das Gerät keinesfalls
in der Nähe oder über einem Radiator
oder Heizkörper aufgestellt werden,
oder an Orten, an denen es direkter
Sonneneinstrahlung ausgesetzt ist.
Dieses Symbol weist darauf
hin, dass diesem Gerät
wichtige Anweisungen
zu Betrieb und Wartung
beigefügt sind.
– Stellen Sie keine Behälter (wie z. B.
Vasen) mit Wasser auf dieses Gerät.
Ausgegossenes Wasser kann zu Brand
und Stromschlag führen.
• Setzen Sie das Gerät keinesfalls Regen
aus und stellen Sie es nicht in der Nähe
von Wasser auf (Badewanne, Küchenspüle,
feuchter Keller, Schwimmbecken usw.). Falls
das Gerät dennoch Nässe ausgesetzt wurde,
trennen Sie es von der Stromversorgung und
wenden Sie sich umgehend an Ihren örtlichen
Vertreter.
• Überlasten Sie Steckdosen,
Verlängerungskabel und Steckerleisten
keinesfalls, da dies zu einem Brand oder
Stromschlag führen kann.
DEU - 2DEU - 3
• Verlegen Sie die Netzkabel so, dass nicht
auf sie getreten werden kann oder das keine
Gegenstände auf ihnen stehen. Achten Sie
besonders auf Kabel im Bereich der Stecker,
Steckdosen und den Kabelausgängen am
Gerät.
• Zum Schutz des Geräts bei einem Gewitter
oder längerem Nichtbetrieb trennen Sie das
Gerät vom Netz. Trennen Sie darüber hinaus
das Antennenkabel vom Gerät. Auf diese
Weise werden Schäden durch Blitzschlag oder
Spannungsstöße vermieden.
• Stellen Sie sicher, dass die Nennspannung des
Netzteils für die örtliche Stromversorgung
geeignet ist, bevor Sie das Netzkabel an die
Stromversorgung anschließen.
• Stecken Sie keine Metallgegenstände in
die Öffnungen des Geräts. Dies kann zu
Stromschlägen führen.
• Berühren Sie keinesfalls Bauteile im
Geräteinneren, um Stromschläge zu
vermeiden. Das Gerät darf nur von einem
qualizierten Techniker geöffnet werden.
• Stellen Sie sicher, dass der Netzstecker
fest in der Steckdose sitzt. Ziehen Sie das
Netzkabel nur am Stecker aus der Steckdose.
Ziehen Sie niemals am Netzkabel, um es aus
der Steckdose zu ziehen. Berühren Sie das
Netzkabel nicht mit nassen Händen.
• Wenn das Gerät nicht einwandfrei
funktioniert, insbesondere beim Auftreten
ungewöhnlicher Geräusche oder Gerüche aus
dem Inneren, trennen Sie es unverzüglich von
der Stromversorgung und wenden Sie sich
umgehend an Ihren autorisierten Händler
oder den Kundendienst.
• Wartung des Gehäuses.
– Wenn Sie andere Komponenten an dieses
Gerät anschließen, müssen diese vorher
abgeschaltet werden.
• Ziehen Sie den Netzstecker aus der
Steckdose, wenn Sie das Gerät für längere
Zeit nicht benutzen oder wenn Sie das Haus
verlassen (insbesondere wenn sich Kinder,
ältere oder behinderte Personen allein im
Haus benden).
– Staubansammlungen können zu Stromschlag,
Kriechströmen oder einem Brand führen,
da es am Netzkabel zu Funkenbildung,
Überhitzung oder einer Verschlechterung der
Isolierung kommen kann.
• Wenden Sie sich an einen autorisierten
Kundendienst, um entsprechende Hinweise
zu erhalten, wenn Sie das Gerät an einen
Ort mit extremer Staubbelastung, hohen
oder niedrigen Temperaturen, hoher
Luftfeuchtigkeit oder an dem chemische
Substanzen auftreten aufstellen wollen
oder wenn es 24 Stunden am Tag betrieben
werden soll, wie z. B. an Flughäfen,
Bahnhöfen, usw. Falls Sie dies unterlassen,
kann es zu einer ernsthaften Beschädigung
des Produkts kommen.
• Verwenden Sie ausschließlich richtig
geerdete Stecker und Steckdosen.
– Eine falsche Erdung kann zu Stromschlag
oder Beschädigung des Geräts führen.
(Nur Geräte der Klasse I.)
• Um das Gerät vollständig abzuschalten, muss
der Netzstecker aus der Steckdose gezogen
werden. Aus diesem Grund müssen die
Steckdose und der Netzstecker jederzeit frei
zugänglich sein.
• Halten Sie Kinder vom Gerät fern.
• Bewahren Sie das Zubehör (Batterien usw.) an
einem für Kinder nicht zugänglichen Ort auf.
Loading...
+ 29 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.