Page 1
SW85ASP-01976C-GB Page 1 Monday, August 14, 2006 6:32 PM
WASHING MACHINE
User’s Manual
• Please read this manual before using and note how
to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
• The User’s Manual is for common use.
Make use of the User’s Manual depending upon
your washing machine model.
SW82ASP \ SW85ASP
FEATURES............................................................................................2
Keeping the tub clean............................................................................2
SAFETY INSTRUCTIONS.....................................................................3
DESCRIPTION OF PARTS ...................................................................4
CHECKING BEFORE WASHING AND CARING FOR GARMENTS ......5
CONTROL PANEL ................................................................................6
HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY .......7
MANUAL FUNCTIONS ......................................................................... 9
Cleaning the tub ....................................................................................9
INSTALLATION & MAINTENANCE.................................................... 10
Environment.........................................................................................10
Levelling...............................................................................................10
Connecting the water supply hose ......................................................11
Assembling the rat protection panel ....................................................11
How to connect the drain hose ............................................................ 11
How to add the fabric softener.............................................................12
How to put the detergent in .................................................................12
Water supply connector filter ............................................................... 12
Cleaning the filter.................................................................................13
How to clean the pump filter ................................................................ 13
TROUBLESHOOTING ........................................................................ 13
WASHING MACHINE WON’T WORK .................................................14
SPECIFICATIONS............................................................................... 15
www.samsung.com/global/register
Code No.: DC68-01976CRegister your product at
Page 2
SW85ASP-01976C-GB Page 2 Monday, August 14, 2006 6:32 PM
FEATURES
• C
■
CAS SYSTEM
HILD LOCK FUNCTION
• A UTO RESTART
The power is turned on automatically after power failure.
• S AVING ENERGY
The ECONO WASH it is a wash course to saving the energy reduces laundry time for frequent and soiled clothes.
DIGITAL (FUZZY) CONTROL
■
DIGITAL (FUZZY) control operates with best washing course by sensing
the washload like artificial intelligence.
■
PULSATOR
The Pulsator helps water and detergent to go through fabrics efficiently
while providing both the powerful water action to clean lager and heavier
clothes and the gentle water action to clean all delicates with less wear and
tear on clothes.
■
WATERFALL FLOW
The Waterfall Flow injected from under the pulsator cascades with full force
back into the tub, pushing down any clothes that float right under the water
surface. It is this Waterfall Flow that enables this washing machine to effectively wash large and heavy items, such as bluejeans and blankets.
■
MAGIC FILTER
This unique magic Filter ensures that all the lint inside the tub is captured
for top quality filtering results to deliver consistently effective cleaning
results.
■
CHILD-LOCK FUNCTION
This is a device to protect children from being accidentally hurt while playing
with the washer.
How to start Child-Lock function:
•
Press the “Power” button to go to an initial washing mode.
•
By pressing “Start/Hold” button, you start washing and in case Child
Lock function is needed during the laundry
•
Press both the “WATER LEVEL” and “WASH” buttons in simultaneously
and get the function started.
(Note: You cannot perform the function without the “Power” button on.)
To release the function of Child-Lock:
•
In case the “Child-Lock” is programmed, press both the “WATER LEVEL”
and “WASH” buttons in simultaneously.
આ
Keeping the tub clean
When using the machine under humid conditions for an extended time, various bacteria from the air may stick to the tub and form black dirt (fungi),
causing damage to the human body. To keep the tub clean and hygienic at
all times, it is recommended reading “Cleaning the Tub” above and using
only dedicated or recommended detergents to clean the tub regularly at
least once every one to three months.
SOFTENER DISPENSER
■
The Softener Dispenser releases the fabric softener at the appropriate time
when the last rinsing proceeds.
SUPER CLEAN
■
SUPER CLEAN adjust the level of water by 5 steps so as to enhance detergent efficiency by adjusting the density of detergent to normal density.
- 2 -
Page 3
SW85ASP-01976C-GB Page 3 Monday, August 14, 2006 6:32 PM
SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent
unpredictable danger and damage by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not
exceed 50 ° C.
•
Plastic parts may be deformed or damaged, and an electric shock or a fire
may take place.
ARNING
W
There might be serious injury or fatal accident when you violate this
instruction.
If the plug (power supply cord) is damaged, it mustbe replaced by the man-
•
ufacturer or its service agent or a similarly qualified person in order to avoid
a hazard.
Do not pull the cord off or touch it with moist hands.
•
−
An electric shock or a fire may take place.
•
Do not bend the power supply cord by force or press it with heavy hings.
−
An electric shock or a fire may take place.
•
Do not install the washer nearby electric implement or don't put a candle
light or cigarette light on the washer.
A fire may take place.
−
During operation, do not put your hands or metal materials under the
•
washer.
−
You may be hurt by spinning board beneath the washer.
•
Stay away from the washer when the bottom of the washer sinks into the
water.
There might be an electric shock. Please wait until the water drains out
−
completely.
Do not put laundry stained with gasoline, benzene, or alcohol in the washer,
•
and keep the materials away from the washer.
−
An explosion or a fire may take place.
•
During spinning, don’t put your hand in the spinning tub.
It may hurt your hands. If it does not stop within 15 seconds after you
−
open the lid, call service agent immediately.
This appliance is not intended for use by young children or infirm persons
•
unless they have been adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with
the appliance.
This appliance has to be connected to the plug endurable to proper power
•
consumption.
This appliance has to be positioned so that the plug is accessible after
•
installation.
•
No user-serviceable parts inside. Refer any servicing to qualified service
personnel.
−
Otherwise this may cause a mechanical error, electric shock, fire or phys
ical damage.
−
The product warranty does not cover problems resulting from disassem
bling the product.
•
Do not use this product for business purposes.
•
For washing machines with ventilation openings in the base, that a carpet
must not obstruct the openings.
UTIONS
CA
There might be a slight injury or damage when you violate this
instruction.
•
Don’t install it in the area with moisture or outdoor where it has rain or snow.
−
An electric shock or a fire may take place.
•
Please unplug the power supply cord when you do not use it.
−
An electric shock or a fire may take place.
•
If there is dust or water on the power supply plug and its connected part,
please remove it completely.
−
An electric shock or a fire may take place.
•
Do not make your kids look into the inside of the washer.
−
If your kid falls into the washer, his life could be in danger.
•
Ventilate immediately without touching the power plug if gas is leaking.
−
An electric shock or a fire may take place if it catches flame.
•
If the washer makes strange noise, smell or smoke, unplug it promptly and
call service agent.
An electric shock or a fire may take place.
−
•
When cleaning, don’t spray water to the parts of the washer directly.
It may make it’S life span shorten.
−
Also an electric shock or fire may take place.
Don’t use several appliances together with an outlet.
•
A fire may take place due to unusual heat.
−
•
Don’t press the button with an awl or pin.
An electric shock or a fire may take place.
−
Use the new hose-sets and old hose-sets should not be reused.
•
If the damage is found on the current cord in use, it should be replaced by
•
manufacturer, service cener or authorized person in order to avoid the risk.
Connect the grounding wire to the shell plate, and bury it under at least
•
25cm of earth:elternatively, connect the ground wire to the appropriate pin
on a properly grounded power receptacle. Never connect the wire to a telephone line, lightning rod, or gas pipe.
“CAUTION: If this appliance is supplied from a cord extension set or electrical
-
-
portable outlet device, the cord extension set or electrical portable
outlet device must be positioned so that it is not subject to splashing or ingress of moisture.”
- 3 -
Page 4
SW85ASP-01976C-GB Page 4 Monday, August 14, 2006 6:32 PM
DESCRIPTION OF PARTS
'
The User
Make use of the User
s Manual is for common use.
s Manual depending upon your washing machine model.
'
FILTER
Lint will be collected in the
filter during washing.
LID
Be sure to keep the lid
closed during washing
and spinning.
WATER SUPPLY HOSE(HOT)
WATER SUPPLY HOSE(COLD)
DRAIN-HOSE(PUMP)
DETERGENT BOX
SPIN BASKET
BLEACH INLET
WATERDROP MARK
PULSATOR
ADJUSTABLE LEGS
Adjust the length of the
legs when installing
the washer.
POWER CORD
GROUND LEAD
When the water pipe is
metal, make sure to cover
the end of the ground wire.
WATER DRAIN HOSE
- 4 -
Page 5
SW85ASP-01976C-GB Page 5 Monday, August 14, 2006 6:32 PM
CHECKING BEFORE WASHING AND
CARING FOR GARMENTS
Must follow the checkpoints in order to avoid machine problems or damages on
garments.
If the below problems are caused by customer’s faults, separate service fee
will be charged.
Checkpoints Before Starting Washing
Check if the clothes are bleaching or not.
Add liquid detergent to a white towel and the garment where you can’t
notice well. Then, rub together strongly. Check if the color transferred to the
towel.
Be careful for scarves and imported clothes since they are easily
discoloring.
Check for stains or partial dirt.
If stains are found, use the towel wet with detergents to rub on in a single
direction.
Before washing, the sleeves, collar, dress hem and pockets are pre-treated
by brushing with detergents.
The wrinkle-processed clothes made of wool are specially treated by fixing
them with threads before washing. The threads shall be removed after the
clothes are dried.
Not washable laundry
Clothes those are easily transformable even by soaking in water.
Even by soaking in water, neckties, brassieres, jackets, suits and coats can
be easily transformed like shrinking and discoloring on the garment
surfaces because they are mostly made of rayon, polynosic, cuff and their
blend fabrics.
The wrinkle-processed, embossed, or resin processed products are easy
to transform even by soaking in water.
Easily discoloring products made of cotton and wool, wrinkled silk, leather
products, leather accessory, leather ornamented clothes and its accessory.
Don’t wash those clothes without handling guideline or material indication
tag.
About Detergent
When detergents are not dissolving well, use warm water (about 40 ° C) to
dissolve the detergent.
Caution
Use an appropriate amount.
Even if excess amount of detergent is used, there is not much difference in
washing result. It may cause damages to the garments because rinsing is
not enough.
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
The bleaching agent may cause damages to garments since it is strong alkali.
Do sufficient rinsing because the powder detergent is easily remained on
the garments causing bad odors.
If too much detergent is used or cold water is used, it doesn't dissolve
completely and remain on the garments, hose or spin basket, causing
contamination on clothes.
In case of reserved washing, detergents must be put in the detergent box.
If the powder detergents are spread on laundry directly, it may cause
discoloration.
CARING FOR CLO
Must follow the checkpoints in order to avoid machine problems or
damages on garments.
If the below problems are caused by customer's faults, separate service fee
will be charged.
THES BEFORE WASHING
☞
Take out personal belongings from pockets.
Caution, Check the pockets! Hairpins and
coins cause damages to clothes and washing
machine.
They make noise and problems to the
machine. Must check the pocket.
EIGHTY EIGHT
If pants zippers are open while washing, the spin basket may be damaged.
The zipper should be closed and fixed with a string before washing.
If blue jeans and working uniform's zippers or hooks are
made of steel, they must be closed before washing.
Wash winter jumpers, working uniforms, bed cover
sheets, and blue jeans separately.
Fold clothes well into the spin basket. Must remove
the curtain hooks before washing.
Tu rn inside out the button decorated and embroidered
clothes before washing.
Be careful those metal decorations because they cause heavy damages
while washing.
The long stringed clothes may tangle with other clothes. Must fix the
strings before washing.
The metal from brassieres may stick out and damage other
clothes or the spin basket. Must use the commercial laundry
net for washing brassieres. (Use a laundry net of fine
mesh.)
Waterproof clothes (Ski Wear, Diaper Covers, Footboards)
are not allowed for washing.
The waterproof sheet, clothes, and non water
permeable fabrics shouldn't be washed, rinsed, or
put in a spin basket. The laundry may pop out and
cause severe vibration so that a person may get
damaged and the machine, wall, and floor may break out in addition to
clothes. (Examples are diaper cover, waterproof wear, raincoat, umbrella
cover, ski wears, car cover sheet, and sleeping bags.)
- 5 -
Page 6
SW85ASP-01976C-GB Page 6 Monday, August 14, 2006 6:32 PM
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
➜
Cautions During Spinning
Spinning of regular garments
The water from garments is drained out through the spin basket holes.
−
Spinning of waterproof clothes and fabrics
Even if the spin basket spins, water can't drain out from the waterproof
−
clothes and fabrics. Therefore, water gathers to one side and this cause a
severe vibration. If the spin basket spins at a high speed, water still can't
drain out from the waterproof clothes and fabrics. As a result, garments
move up and pop out with a big vibration.
Shake the dirt or soils from clothes.
Soil and sands may rub delicate garments to cause
damages and the washing result may be
unsatisfactory.
For protection of baby skin
Wash diapers and baby wears (baby clothes, baby towels etc) separately.
Dirt may get to baby's clothes from adult's clothes if washing them together.
Do pre-washing for white socks, sleeves, and collars
before the main washing.
Use powder and liquid detergents.
Don't' use soap. It may leave dirt to the spin basket.
Turn inside out for those nappy clothes before washing.
If clothes have too much foreign matter, separate them for
washing. Other clothes may pick up those dirty matters
(dirt, thread).
Wash black colored clothes and cotton towels separately.
If they are washed together, towels may pick up dirty
matters. Check before washing.
Cashmilon and those garments having big volume and lightweight (eg. lasedecorated clothes, lingerie, nylon stocking, synthetic fabrics etc.) may rise
and cause damages to the clothes and problems to the machine. Use the
laundry net or wash them separately.
Must put those long stringed clothes, lase-worked
clothes, bed cover sheet, wool clothes into a laundry
net before washing.
Put delicate clothes in the laundry net.
Use only those commercial laundry net for washing.
Curtains, floating garments or blue jeans shall be
pressed not to float on the water.
If they are floated on the water, press Start/Hold button to stop and press
them to sock in the water. If the washing goes on with clothes floating on
the water, it may cause damages to the clothes and the washing machine
as well as unsatisfactory washing result.
CONTROL PANEL
For more details, see control panel of your washing machine.
■
POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
■
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during
operation, press this button to stop, and once
again to restart after changing the procedure.
■
DELAY START BUTTON
Press this button when delay start washing is
needed.
■
PROGRAM SELECT BUTTON
With every press of this button, the washing
course changes;
HEAVY DUTY ➜ ECONO WASH ➜ QUICK ➜
WOOL
■
SUPER CLEAN BUTTON
Press the button once to perform SUPER
CLEAN. Press the button again to perform
normal cleaning.
WASH BUTTON
■
Determines wash time period whenever you press
the button.
RINSE BUTTON
■
Determines rinse time period whenever you press
the button.
■
SPIN BUTTON
Determines spin time period for drying laundry
whenever you press the button.
WATER LEVEL SELECT BUTTON
■
According to the washload,select the water level;
MEDIUM ➜ HIGH ➜ MAXIMUM ➜ HIGH ➜
MEDIUM ➜ MED-LOW ➜ LOW ➜ EXTRALOW
WATER SUPPLY SELECT BUTTON
■
As you press this button, the type of water is
selected as follows.
COLD ➜ COLD + HOT ➜ HOT ➜ COLD
REMAINING TIME INDICATOR LIGHT
■
The indicator light shows the remaining time (in minutes) of each wash cycle.
At the end of the cycle, the power automatically switches off.
SENSOR ➜ BEDDING ➜
SENSOR
- 6 -
Page 7
D
ET
ERG
EN
T
F
A
B
R
IC
SO
FTE
N
E
R
SW85ASP-01976C-GB Page 7 Monday, August 14, 2006 6:32 PM
HOW TO WASH AUTOMATICALLY
DEPENDS ON THE LAUNDRY
Before starting washing, check the following;
•
Connect the water supply hose to the water tap. Leave a tap open. Plug the
power cord in. Make sure to lay down the drain hose.
■
WASHING FOR THE FIRST TIME
Before washing clothes for the first
time, you must run a complete cycle
without clothes. To do this:
1. Press the POWER button.
2. Pour a little detergent into
compartment in the detergent
drawer.
3. Turn on the water supply to the
washing machine.
4. Press the Start/Hold button.
This will remove any water from the manufacturer's test run remaining in the
machine.
SPECIAL NO
Automatic Sensing Function
•
At every course (except, wool course) the amount of laundry is
automatically sensed and then appropriate water level, washing time,
rinsing cycle, and spinning time are automatically selected for automatic
washing.
•
After the power is on, a course is selected and Start/Hold button is pressed.
Then, the washing board starts spinning without water. This action senses
how much laundry is in the washing basket, not a machine problem. After
this sensing process, water supplies automatically.
Adding Detergent and Softener
•
It senses the amount of laundry and indicates the water level and amount of
detergent. Then, it starts water supply right away.
•
During the water supply, it is possible to open the detergent box and add
detergent. However, it is better to press Start/Hold button to stop water
supply and add detergent. Close the lid and press Start/Hold button again.
This way is much more convenient.
If the softener is inserted in the softener dispenser, it automatically adds in
•
at the last rinsing cycle.
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent for the fabrics you are
•
washing.
TES!
If the lid is open while running, the washing machine is
•
stopped automatically for safety. (Except, water supply continues while the lid is open.)
•
When hot water is selected, both cold and hot water are supplied for the first 20 seconds in order to protect the clothes.
Possible to control the washing time, rinsing cycle, and spin-
•
ning time at every course during the washing.
SENSOR PROGRAM
■
Selects the best washing course automatically.
1. Press the POWER Button to “ON”.
2. Press the START/HOLD button.
Water level is selected automatically. Washing rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.
3. Close the lid.
BEDDING PROGRAM
■
(Big volume laundry like bedding and bed cover sheets)
1. Press the power button to “ON”.
2. Press the program select button once.
3. Press the START/HOLD button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.
4. Close the lid.
• Fold those big volume laundry (bedding and
bed cover sheets) in the following way
before adding into the spin basket.
• Do not wash the electric bedding and carpets.
• Get a laundry net for those light and big volume laundry (eg. Cashmeres)
because they might rise in the water and get damaged.
■
HEAVY DUTY PROGRAM
1. Press the POWER button.
2. Press the program select button twice.
3. Press the START/HOLD button once.
Water level is selected automatically. Washing, rinsing, and spinning follow.
4. Close the lid.
- 7 -
Page 8
SW85ASP-01976C-GB Page 8 Monday, August 14, 2006 6:32 PM
ECONO WASH PROGRAM
■
Operates only in cold water
1. Press the power button to “ON”.
2. Press the program select button three times.
3. Press the START/HOLD button.
Water level is selected automatically. Washing rinsing, and spinning follow. If
you want to pause, press the START/HOLD button again. You can change
the course when paused.
4. Close the lid.
■
QUICK PROGRAM
.
If you want to wash those frequently used towels or less dirty laundry time.
Because washing is quick, it is good for light or less stained laundry.
1. Press the power button to “ON”.
2. Press the program select button four times.
3. Press the START/HOLD button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.
4. Close the lid.
WOOL PROGRAM
■
Washable sweater, cardigan, delicate clothes etc.
CAUTION…
Do not use water above 30 ° C For WOOL washing.
−
Refer to the tag attached on the clothes for washing information.
−
Fasten buttons and turn inside out before washing.
−
Use the detergent indicated in the laundry.
−
When the degree of dirt is extreme, soak the laundry in warm water for
−
about 10 minutes before pressing the WOOL course button in order to
enhance washing efficiency.
DELAY START
■
How to reserve washing?
Select this course when you have to go out or do something else.
1. Press the power button to “ON”.
2. Press the program select button.
3. Press the DELAY START button once.
You may change the delay start time with use the DEALY START button.
(from 3 hours to 19 hours)
4. Press the START/HOLD button and put the proper amount of detergent into tub.
5. Close the lid.
The washing finishes by the time you reserved.
Add detergent and softener in proportion to the water level. Then, close the lid.
Must add the detergent in the detergent box.
•
If the detergent is spread on the laundry directly, some clothes may get
•
discolored as the start delays.
If the Delay Start needs to be canceled, press the power button.
•
The reserved finish time may be changed depends on the water pressure.
•
■
SUPER CLEAN
Use for cleaner washing.
1. Press the power button to “ON”.
2. Press the program select five times.
3. Press the START/HOLD button.
Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD
button again. You can change the course when paused.
4. Close the lid.
1. Press the power button to “ON”.
2. Press the SUPER CLEAN button.
3. Press the START/HOLD button and put the proper amount of detergent into tub.
Water level is selected automatically.
Water level is only selected MAXIMUM~MEDIUM.
4. Close the lid.
The washing finishes by the time you reserved.
- 8 -
Page 9
SW85ASP-01976C-GB Page 9 Monday, August 14, 2006 6:32 PM
MANUAL FUNCTIONS
Sterilization and anti-bacteria coating are optional depending on the selection
or no selection of stroke. (Nano silver system operates only when hydration is
selected.)
WASH ONLY
Press the POWER button.
Press the WASH button.
Press the START/HOLD button.
Washing goes on for 20 minutes.
When the WASH button is pressed during washing, the
wash time can be changed to between 6 and 30
minutes in duration.
RINSE ONLY
Press the RINSE button.
Press the START/HOLD button.
Rinsing goes on for 2 times.
When the RINSE button is pressed during rinsing, the
rinse times can be changed to between 1 to 5 times in
duration.
SPIN ONLY
Press the SPIN button.
Press the START/HOLD button.
Spin drying goes on for 10 minutes.
When the FUNCTION button is pressed during
spinning, the spin time can be changed to from 1 to 9
minutes.
WASH AND RINSE
Press the WASH and RINSE button.
Press the START/HOLD button once.
Detects the amount of laundry, and determines wash
and rinse time period automatically.
When the WASH and RINSE button is pressed during
working. Wash time period is determined between 6
and 30 minutes, and rinse time is determined between 1
and 5 times.
RINSE AND SPIN
Press the RINSE and SPIN button.
Press the START/HOLD button once.
Rinsing and spin drying follow.
When the RINSE and SPIN button is pressed during
working. The number of rinse times is determined
between 1 and 5, and spin time period for drying is
determined between 1 and 9 minutes.
WASH, RINSE AND SPIN
Press the WASH, RINSE AND SPIN button.
Press the START/HOLD button once.
WASH, RINSE AND SPIN is performed.
CLEANING THE TUB
■
1. Press the POWER button.
2. Press the PROGRAM button to select the SOAK course.
You can select the water supply or temperature (hot/cold).
3. Press the WATER LEVEL button to select HIGH.
4. Press the START/HOLD button.
5. Add a dedicated detergent and close the lid.
- Never place laundry in the tub when cleaning inside the tub, as this can
cause discoloration or damage to the laundry.
- When doing the laundry after cleaning the tub, you may find some impurities.
These are just detergent residues and impurities after the tub cleaning.
Perform the rinse cycle two to three times.
INSTALLATION & MAINTENANCE
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
ENVIRONMENT
■
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or vibration
occurs. (Allowable is 1 ° )
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly
exposed to rain. Moisture may destroy the electrical insulation causing an
electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the
washer near furnaces, boilers, etc. Do not place under direct sunlight.
LEVELLING
■
If the washer is not leveled with the ground, it makes the machine tremble
•
more or be out of order. So, make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
•
Open the lid of the machine, pour water into the
tub up to the level just below the pulsator, and
adjust the legs so that the pulsator is positioned
at the center of the water as shown in the figure.
•
Place the machine more than 10cm away from
the wall.
•
Adjust the legs on feet
WATER
- 9 -
Page 10
SW85ASP-01976C-GB Page 10 Monday, August 14, 2006 6:32 PM
ADJUSTMENT THE HEIGHT OF THE MACHINE
Adjust the legs to level the washer
Be careful not to put in your hand under the legs.
Pull the handles located at the right and left of the
front side and slide off.
☞
CONNECTING THE WATER SUPPLY HOSE
■
1. Remove the adaptor from the water supply hose.
Waterdrop
mark
Adjust the height of the machine upward or
downward.
When the adjustment is finished, push the handles
to fix the adjusting legs.
Cause How to level
The front part is
Level it by adjustable legs.
lower
The back part is
lower
The left part is
lower
Adjust the height by using the adjustable
rubber or prop at the back.
Adjust the left part by using the adjustable
legs at the front and the adjustable rubber
at the back.
The right part is
lower
Adjust the right part of the washer by
using the adjustable leg at the front and
the adjustable rubber at the back.
2. First, using a “+” type screw driver, loosen the four
screws on the adaptor. Next, take the adaptor and turn
part(b) following the arrow for gap about 5mm between
them.
3. Connect adaptor to the water tap by tightening the screws
firmly. Then, turn part(b) following the arrow and put (a)
and (b) together.
4. Connect the water supply hose to the adaptor. Pull down
the part (c) of the water supply hose. When the part (c) is
released, the hose is automatically connected to the
adaptor making a ‘click’ sound.
5. Connect the other end of the water supply hose to
the inlet water valve at the back of the washer.
Screw the hose clockwise all the way in.
5-1. Connect the other end of the water supply hose to
the inlet water valve at the top of the washer.
Screw the hose clockwise all the way in.
If the water tap is a screw type, assemble a water
supply hose that fits to the tap as shown.
a
b
c
- 10 -
After completing connection, if water leaks from the hose, then
repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big, remove the spacing ring
before inserting the faucet into the adaptor.
Page 11
SW85ASP-01976C-GB Page 11 Monday, August 14, 2006 6:32 PM
☞
☞
1.
2.
3.
1.
2.
3.
4.
ASSEMBLING THE RAT PROTECTION PANEL
■
Tilt the washer a little and lift up the panel until it clicks, finally fix the panel
with screw to the base as shown in the figure.
Rear-side
1. Insert the sound absorbing panel to the assembling
hole on back side to the end
2. If you have difficulty inserting the panel lift up the washer
a little and insert it.
* THE PROTECTION PANEL IS NOT APPLIED IN
SOME MODELS.
HOW TO CONNECT THE DRAIN HOSE
■
IN CASE OF PUMP-DRAINED WASHER
Take out the cap-hose and
connect the outlet-hose.
Be sure to join tightly the drain hose into
the drain-outlet on the back of the
machine.
IN CASE OF GENERAL WASHER
After pressing the joint ring, insert to the drain
hose.
After directing the drain hose to a drain, join to
the drain-outlet of the washing machine.
Be sure to join them tightly by pressing the joint
ring and pushing it into the drain-outlet.
The length of drain hose is adjustable so that
•
you can extend the length appropriately.
HOW TO CHANGE THE DRAIN HOSE DIRECTION
•
The handle of joint ring is pressed to pull out the
drain hose. Change the direction of the drain
hose and follow the above guideline again.
CAUTIONS WHEN INSERTING THE DRAIN HOSE
Don’t exceed more than 3m when the
drain hose is used by connecting whth
other hoses.
drain-outlet
Less than 3m
Be sure to join tightly the drain
hose into the drain-outlet on
the side of the machine.
Install the drain hose in the position of
about 90~100cm above the ground.
90~100cm
- 11 -
Be careful to drain water out at the end of
the drain hose.
The doorsill shoudn’t be more than
5cm.
Don’t install the drain hose underneath
the wash machine.
Less than 3m
Less
than 5cm
Page 12
SW85ASP-01976C-GB Page 12 Monday, August 14, 2006 6:32 PM
2.
1.
2.
3.
1.
1.
2.
2.
3.
3.
4.
4.
1.
2.
3.
HOW TO ADD THE FABRIC SOFTENER
■
When a proper amount (one time does) of fabric softener is
•
stored in the softener inlet, it is automatically put in at the last
rinsing cycle.
Do not use detergent, bleach or starch into the Softener Inlet.
•
Using too much softener may produce
•
unsatisfactory results.
Do not open the lid during the Spin Dry cycle. If
•
added too early, its effectiveness will decrease.
Do not leave the softener into the Softener.
•
Dispenser for a long time. Because softner
became stiff.
■
HOW TO PUT THE DETERGENT IN
1. Open the detergent box by pulling in the direction of the arrow as shown in
the figure and then put the powder detergent in the detergent box.
Put in one-time amount of detergent evenly so the detergent may not brim
over the box.
Detergent Device
••••••••••••••••••••
Put the
detergent in proportion
to Water level
Softener Device
Softener
baseline
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
••••••••
••••••••••
CAUTION : If softener is stored over the above base line, it may flow down at
any time.
■
WATER SUPPLY CONNECTOR FILTER
CLEANING THE FILTER
■
Clean the filter net often to keep the washer clean.
Push the upper part of the Magic
Push up and pull out the filter net.
filter and pull in.
Open the cover as shown in the
figure.
Clean the Magic filter.
Close the cover and insert the
Remove the collected lint from the
filter net.
Clean the filter net.
Pull down the filter net.
lower part of the filter in the
basket first and then push the
filter with “click” sound.
Pull out the filter and
wash well.
inlet water
valve
Pull in the filter and
connect the hose to the
inlet water valve tightly.
Check if there is a
leakage.
Note to tighten up
the connector.
- 12 -
■
HOW TO CLEAN THE PUMP FILTER
Place a rag under the washer filter not to
wet the floor.
Rotate the filter counterclockwise and pull
out the filter.
Remove dirts and rotate the filter clockwise
until it locks in position.
Page 13
SW85ASP-01976C-GB Page 13 Monday, August 14, 2006 6:32 PM
➜
➜
➜
➜
➜
TROUBLESHOOTING
Washing machine won’t work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15 minutes, a buzzer will
sound, and the remaining time indicator will show “5E”.
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour, a buzzer will sound, and the remaining time
indicator will show “4E”.
Spinning does not work
Is the laundry spread out evenly in the washer?
In the washer set on a sturdy flat surface?
Water is overflowed
Restart after spinning.
If the error sign still indicates, call agency.
WASHING MACHINE WON’T WORK?
The power is cut off.
Check 1> Is the electric voltage normal?
Check 2> Is the washer plugged in? Plug in the electric cord.
Water does not drain.
Check 3> Is the drain hose down? Put the drain hose down.
Check 4> Is the drain hose folded? Unfold the drain hose.
Check 5> Is the drain hose outlet clogged? Remove the waste cleanly.
Washing machine won’t work.
Check 1> Is the washer lid open?
Close the lid.
Check 2> Is the Hold button on?
Press the Start/Hold button one more time and check if the
washer starts.
Check 3> Is enough water filled to the water level?
If the water pressure is low, it takes a long time to start washing.
Check 4> Is the faucet closed?
Open the faucet to supply water.
If the drain hose and spin basket are frozen, do as follows.
•
Add hot water to the frozen water tap and remove the drain hose. Soak into
hot water.
Pour hot water into the spin basket for about 10 minutes.
•
•
Put a hot water towel on the drain hose connector.
•
If the drain hose defrosts, connect again and check for proper water
draining.
- 13 -
The water drains out immediately.
•
The drain is clogged with coins or pins. The drain hose is hung over the
drain hose hook. Half fill the spin basket with water and try for spinning
again.
Page 14
SW85ASP-01976C-GB Page 14 Monday, August 14, 2006 6:32 PM
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
l
l
l
l
l
l
.
WASHING MACHINE WON’T WORK? (Continue)
The water leaks at the water supply hose connector.
Check 1> If the faucet connecting part is loose, water may leak.
Repeat the assembling steps again.
(Refer to “Connecting the water supply hose”)
Check 2> Check if the rubber packing of water supply hose is in the right
position.
Screw tightly again.
Check 3> Is the water supply hose folded?
Unfold the hose.
Check 4> If the water supply is too strong, water may leak.
Close the faucet a little.
Check 5> Is water leaking from the faucet itself?
Fix the faucet. Water is not supplied.
Check 6> Did you press the Start/Hold button after selecting the water
supply?
If the Start/Hold button is not pressed, water is not supplied.
Press the Start/Hold button.
Check 7> Is the faucet closed?
Turn on the faucet.
Check 8> Is the filter net at the water supply hose connector clogged with
dirty matters?
Clean the filter net by brushing with a toothbrush.
Check 9> Is the water supply cut off?
If the water supply is suspended, turn off the faucet and power off.
Spinning makes loud noises and vibrations.
Check 1> Check if the laundry is spread evenly in the washer.
Spread out the laundry evenly and start again.
Check 2> Check if the washing machine levels on a sturdy flat floor.
Set the machine at level.
Check 3> Is the handle for leveling legs loose?
Adjust the legs on the feet for leveling.
Check 4> Is around the washing machine filled with unnecessary stuffs?
Remove those unnecessary things away from the wash
machine.
SPECIFICATIONS
POWER
CONSUMPTION
DIMENSIONS(mm)
WEIGHT 47 kg WATER USAGE 240
WATER PRESSURE
WASHING TYPE Stirring Type SPIN SPEED 710 rpm
WASH 550W
SPIN 310W HIGH 78
W630xD675xH1060
0.05~0.78 MPa
(0.5 ~ 8.0kg
STANDARD
WATER
LEVEL
PULSATOR ROTATING
2
f/cm
)
SPEED
For operating VOLTAGE and FREQUENCY, see the LABEL-RATING on the
back of washing machine
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung
products, please contact the SAMSUNG customer care center.
Samsung Electronics Australia
7 Parkview Drive, Homebush Bay NSW 2127
1300 362 603
www.samsung.com/au
MAXIMUM 91
MEDIUM 62
MED-LOW 48
E/LOW 32
120 rpm
- 14 -
Loading...