Preliminary
This document is subject to change without notice.
S-TAG Datasheet
abel (Electronic Label System)
S-L
REV
0.4
msung Electro-Mechanics
Sa
2014-11-21
S-TAG Datasheet(ST-GM6000)
Summary
This datasheet presents the general performance and specif ications of S-Tag for S-Label ESL (Electronic
Shelf Label) system, which is based on IEEE 802.15.4.
© 2014 Samsung Electro-Mechanics. All rights reserved
The names of actual companies and products mentio ned herein
may be the trademarks of their respective owners.
No part of this document may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means
without the express written consent of Samsung ElectroMechanics.
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
1/13
Preliminary
S-TAG Datasheet(ST-GM6000)
Table of Contents
1 GENERAL DESCRIPTION ..................................................................................................... 4
1.1 F
EATURES .............................................................................................................................. 5
1.2 TYPICAL APPLICATIONS .............................................................................................................. 5
1.3 A
PPEARANCE ........................................................................................................................... 5
2 SPECIFICATION .................................................................................................................. 6
2.1 P
RODUCT SPECIFICATION ........................................................................................................... 6
2.2 RADIO (RF) SPECIFICATION........................................................................................................ 7
2.3 M
2.4 L
ECHANICAL DRAWING ............................................................................................................. 7
ABELS .................................................................................................................................. 8
3 PACKAGE ........................................................................................................................... 10
4 CAUTIONS FOR TREATMENT............................................................................................. 12
4.1 U
4.2 S
SAGE ENVIRONMENT ............................................................................................................. 12
TORAGE AND USE ................................................................................................................. 12
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
2/13
Preliminary
S-TAG Datasheet(ST-GM6000)
Document History
Rev. Date Revision history Page
0.1 24 Mar 2014 Initial release -
0.2 23 May 2014 Product Spec typo correction / Label Spec Update 5,10
0.3 17 Jul 2014 RF Spec / Mechanical drawing / Label Spec Update 7-9
0.4 21 Nov 2014 Label spec / Packing Spec update 9-11
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
3/13
Preliminary
S-TAG Datasheet(ST-GM6000)
1 General Description
This S-Tag product is a part of Samsung S-Label (Electronic Shelf Label) system as well as S-Label
Gateway (S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically
displays price and other pr oduct inform atio n on S-Tags, which has been traditionally printed or writ ten on
paper in places like retail markets.
S-Tag receives product price/information updates from S-Gate and updates or changes its display of price
and other information.
S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication
applications. S-Tag consists of RF transceiver, RF circuitry and 8051-compatible MCU offering IEEE
802.15.4 based network protocol and MAC protocol and other peripheral devices.
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
4/13
Preliminary
S-TAG Datasheet(ST-GM6000)
1.1 Features
- Display : E-Paper active type Display (6.0 Inch, 212 Dpi, 758 * 1024 Pixel)
- Communication : Wireless communication based on IEEE 802.15.4
- Operating on 2.4GHz Unlicensed ISM band for ZigBee
- Low Power Consumption
- External Wakeup : Magnetic Wakeup (using Reed switch)
- Outline Dimension : 152.80 mm x 107.10 mm x 16.00 mm
- Working condition: Indoor where wir eless communication is available.
1.2 Typical Applications
- Retail industry with electronic displays, platforms, solutions and services.
- Intelligently communicating, managing, and optimizing price and product informations.
1.3 Appearance
Figure 1 Appearance
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
5/13
Preliminary
Item
Description
Size
152.80 mm x 107.10 mm x 16.00 mm
CR2450 Lithium Battery (3V, 8PCS)
(Operating Voltage : 6V)
E-Paper active type Display
(122.37 * 90.58 mm, 212 Dpi, 758 * 1024 Pixel )
Housing Color
White
Information display
Price, Unit, Symbol etc.
Communication
Wireless communication based on IEEE 802.15.4
Communication Distance
Radius 20m ( Line of Sight)
Etc.
No additional anti-theft locking structure : Rail Mounted only
2 Specification
2.1 Product Specification
Battery
Display
S-TAG Datasheet(ST-GM6000)
Operation Temp. 5 ~ 40 ℃ (@20~60% RH)
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
6/13
Preliminary
SPEC
Min
Typ
Max
Transmit Power
-2
3.5 5 dBm
Error Vector Magnitude
10
30 % When measured for 100 chips
Tx Current
10
14
35
mA
Total current at max Tx Power
RX
Receiver Sensitivity
-90 - -
dBm
PER < 1%
2.2 Radio (RF)1 Specification
S-TAG Datasheet(ST-GM6000)
Item Parameter
TX
2.3 Mechanical Drawing
Unit Condition
1
Test Channel : 2480MHz (Rx : Depending on the situation, flexibly select.)
REV 0.4
Figure 3 Mechanical Dimension
Samsung Electro-Mechanics Proprietary and Confidential
7/13
Preliminary
13 Y 5 S A A 2JW ① ② ③ ④ ⑤ ⑥ ⑦
2.4 Labels
2.4.1 Serial Number Information
Serial 1, 2 Code Value
① Year : Last two digits of manufacturing year.
(00 ~ 99, Example : 2013 is '13')
② Month : Manufacturing month
S-TAG Datasheet(ST-GM6000)
(1 ~ 9, X(10), Y(11), Z(12))
③ Date : Manufacturing date
(1 ~ 9, A(10) ~ V (31))
④ Vendor : Manufacturing vendor
(S : SEMTHAI, T : TSEM, etc)
⑤ Line number : Manufacturing Line number
('A', 'B', 'C', etc)
⑥ Revision : Product revision num ber
(A : First, B : Se cond, C : Third, etc )
⑦ ZigBee IC Lot Number : Last 3 characters of Lot Number.
(example : YME06862JW is '2JW')
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
8/13
Preliminary
S-TAG Datasheet(ST-GM6000)
2.4.2 Product and Mac Label Drawings
Figure 5 Product and Mac Labels
Product information is indicated in a printed sticker label. The information consists of MODEL (model
name), MFD (manufacturing date), S/N (serial number), MAC (MAC address), and Manufacture (SEMCO).
On the back label, FCC & TELEC IDs are added.
1) Model Name : ST-GM6000
2) MFD : (Month).(Date).(Year) ex) MAY.16.2013
3) S/N : Numeric & Barcode & Barcode Number (hexadecimal 10 digit)
4) MAC : barcode & barcode number(hexadecimal 16 digit)
- 6 digits (1st ~ 6th) : xxxxxx (Company code)
- 6 digits (7th ~ 12th) : xxxxxx (Increasing number : 000000 ~ FFFFF F)
- 4 digits (13th ~ 16th) : 6000 (Tag type)
* Certification Mark label will be added on the battery cover.
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
9/13
Preliminary
3 Package
S-TAG Datasheet(ST-GM6000)
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
10/13
Preliminary
S-TAG Datasheet(ST-GM6000)
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
11/13
Preliminary
S-TAG Datasheet(ST-GM6000)
4 Cautions for Treatment
Provisions should be made to protect against any damage to the product caused by improper handling.
It is highly recomme nded that t he product sho uld be i nsta lled w ithin 3 months from the date of arrival in
the logistics hub. Recommended storage condition is in 5-40 Celsius degree, 20-60% RH environment.
This RF device operates on the 2.4GHz frequency band and can produce radio interference. The device,
therefore, may not be used for applications where safety of human lives is concerned.
4.1 Usage Environment
Take extra cautions when using this RF device in the vicinity of other electronic devices and appliances.
Most electronic devices and applia nces use ele ctroma g netic waves. E le ctromag net ic waves e mitte d by t his
RF device can affect other el ectronic devices and applia nc es.
If using the device in an explosion hazard area, follow all safety regulations, instructions, and signals.
4.2 Storage and Use
Moisture and liquids can damage internal parts and circuit boards if allow ed to enter into the device
itself.
Do not place or store the product on a sloped surface. The product may slide and fall off the
surface and damaged.
Use the product in temperatures ranging from +5℃ to +40℃. Parts and circuits may be damaged
if used or stored under temperature extremes.
The display panel needs extra care when handling.
- Do not apply any impacts on outside since e-Paper display is fragile.
- Continuous exposure to excessive moisture (over 60% RH) or UV makes display lifetime
shortened.
- Ghosting image may be appeared in temperature conditions of less than 15 Celsius degree.
Avoid areas with strong magnetism or subject to magnetism.
Contact between the device and a magnetic object can lead to malfunctions.
Do not place the produ ct near hea t-producing kitchen appliances like a stove or a m icrowave or in
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
12/13
Preliminary
S-TAG Datasheet(ST-GM6000)
the vicinity of highly pressurized containers.
External impact to the product, such as from being dropped, can damage the product or battery
casing can be separated.
Twisting and bending the product can damage the exterior casing and the internal components.
If this product operates abnormally in eliminating battery vinyl or replacing battery, try to push
reset switch.
This product uses 2.4GHz frequency band for wireless communication network. Radio
communications can be limited or affected by other applications which share same frequency band,
such as WiFi, Bluetooth, Zigbee, etc.
Frequent communications, updates and screen renewals may reduce battery life time.
REV 0.4
Samsung Electro-Mechanics Proprietary and Confidential
13/13
WARNING : This equipment may generate or use radio frequency energy. Changes or
Caution
This device complies with FCC radiation exposure limits for an uncontrolled environment.
Avoid operating this device at a distance less than 20cm form the user.
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate
this equipment if an unauthorized change or modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received. Including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Loading...