Samsung ST93, ST94 User Manual

This user manual includes detailed usage
instructions for your camera. Please read
this manual thoroughly.

 Click a topic

Basic troubleshooting

Quick reference

User Manual

ST93/ST94

Contents

Basic functions

Extended functions

Shooting options

Playback/Editing

Settings

Appendixes

Index

Health and safety information

Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.

Warning—situations that could cause injury to yourself or
others

Do not disassemble or attempt to repair your camera.

This may result in electric shock or damage to the camera.

Do not use your camera near flammable or explosive
gases and liquids.

This may cause a fire or explosion.

Do not insert flammable materials into the camera or store
these materials near the camera.

This may cause a fire or electric shock.

Do not handle your camera with wet hands.

This may result in electric shock.

Prevent damage to subjects’ eyesight.

Do not use the flash in close proximity (closer than 1 m/3 ft) to
people or animals. If you use the flash too close to your subject’s
eyes, this can cause temporary or permanent eyesight damage.

Keep your camera away from small children and pets.

Keep your camera and all accessories out of the reach of small
children and animals. Small parts may cause choking or serious
injury if swallowed. Moving parts and accessories may present
physical dangers as well.

Do not expose the camera to direct sunlight or high
temperatures for an extended period of time.

Prolonged exposure to sunlight or extreme temperatures can
cause permanent damage to your camera’s internal components.

Avoid covering the camera or charger with blankets or
clothes.

The camera may over-heat, which may distort the camera or
cause a fire.

If liquid or foreign objects enter your camera, immediately
disconnect all power sources such, as the battery or
charger, and then contact a Samsung service center.

1

Health and safety information

Caution—situations that could cause damage to your
camera or other equipment

Remove the batteries from your camera when storing it
for an extended period of time.

Installed batteries may leak or corrode over time and cause
serious damage to your camera.

Use only authentic, manufacturer-recommended, Lithium-ion
replacement batteries. Do not damage or heat the battery.

This may cause a fire or personal injuries.

Use only Samsung-approved batteries, chargers, cables
and accessories.

•Unauthorized batteries, chargers, cables or accessories can
cause batteries to explode, damage your camera, or cause
injury.

•Samsung is not responsible for damages or injuries caused by
unapproved batteries, chargers, cables or accessories.

Do not use batteries for unintended purposes.

This may cause a fire or electric shock.

Do not touch the flash while it fires.

The flash is very hot when fired and may burn your skin.

When you use AC charger, turn off the camera before you
disconnect the power to the AC charger.

Failing to do so may result in fire or electric shock.

Disconnect chargers from power sources when not in use.

Failing to do so may result in fire or electric shock.

Do not use a damaged power supply cord, plug, or loose
outlet when you charge batteries.

This may cause a fire or electric shock.

Do not allow the AC charger to come in contact with the
+/- terminals on the battery.

This may cause a fire or electric shock.

2

Health and safety information

Do not force the camera’s parts or apply pressure to the
camera.

This may cause your camera to malfunction.

Exercise caution when you connect cables or adapters
and install batteries and memory cards.

If you force the connectors, improperly connect cables, or
improperly install batteries and memory cards, you can damage
ports, connectors, and accessories.

Keep cards with magnetic strips away from the camera
case.

Information stored on the card may be damaged or erased.

Never use a damaged charger, battery, or memory card.

This may result in electric shock or camera malfunction or cause
a fire.

Check that the camera is operating properly before use.

The manufacturer takes no responsibility for any loss of files or
damages that may result from camera malfunction or improper
use.

When connecting the USB cable to the camera, be sure to
insert the correct USB cable connector into the camera.

If the cable is reversed, it may damage your files. The
manufacturer is not responsible for any loss of data.

3

Organization of the user manual

Copyright information

• Microsoft Windows and the Windows logo are registered trademarks
of the Microsoft Corporation.

• micro SD™, micro SDHC™ are registered trademarks of the SD
Association.

• Mac is a registered trademark of the Apple Corporation.

• Trademarks and trade names used in this manual are the property of

their respective owners.

• Camera specifications or contents of this manual may be
changed without prior notice due to upgrade of camera functions.

• You are not allowed to reuse or distribute any part of this manual
without prior permission.

• For Open Source License information, refer to the
“OpenSourceInfo.pdf” in the provided CD-ROM.

Basic functions 11

Learn about your camera’s layout, icons, and basic
functions for shooting.

Extended functions 28

Learn how to take a photo by selecting a mode and
how to record a video or voice memo.

Shooting options 41

Learn about the options you can set in shooting mode.

Playback/Editing 62

Learn how to play back photos, videos, or voice memos
and edit photos or videos. You will also learn how to
connect your camera to your photo printer or TV.

Settings 85

Refer to options to configure your camera’s settings.

Appendixes 91

Refer to error messages, specifications, and
maintenance tips.

4

Indications used in this manual

Shooting mode Indication

Smart Auto

Program

Panorama

Scene

Movie

DUAL IS

Shooting mode icons

These icons indicate that a function is available in the
corresponding modes. The
for all scenes.

e.g.)

mode may not support functions

Available in the
Program, DUAL IS,
Movie modes, and
Smart Scene Detection

Icons used in this manual

Icon Function

Additional information

Safety warnings and precautions

Camera buttons; for example: [Shutter] represents the

[ ]

shutter button.

( )

Page number of related information

The order of options or menus you must select to
perform a step. For example: Select Shooting → White

→

Balance represents select Shooting, and then select
White Balance.

*

Annotation

5

Expressions used in this manual

Pressing the shutter

•Half-press [Shutter]: Press the shutter halfway down.

•Press [Shutter]: Press the shutter all the way down.

Half-press [Shutter] Press [Shutter]

Subject, background, and composition

•Subject: The main object of a scene, such as a person,
animal, or still life.

•Background: The objects around the subject.

•Composition: The combination of a subject and background.

Background

Composition

Subject

Exposure (Brightness)

The amount of light that enters your camera determines the
exposure. You can alter the exposure with shutter speed,
aperture value, and ISO speed. By altering the exposure, your
photos will be darker or lighter.

Normal exposure Overexposure (too bright)

6

Basic troubleshooting

You can get answers to common questions. Solve problems easily by setting shooting options.

The subject's eyes
appear red.

Photos have dust
spots.

Photos are blurred.

Photos are blurred
when shooting at
night.

Subjects come out
too dark because of
backlighting.

This is caused by a reflection from the camera flash.

• Set the flash option to

• If the photo has already been taken, select

Dust particles floating in the air may be captured in photos when using the flash.

• Turn off the flash or avoid taking photos in a dusty place.

• Set ISO speed options. (p. 45)

This may be caused by taking photos in low light conditions or holding the camera incorrectly.

• Press [Shutter] halfway down to make sure the subject is focused. (p. 26)

• Use the

As the camera tries to let in more light, the shutter speed slows.
This can make it difficult to steady the camera and may result in camera shake.

• Select

• Turn on the flash. (p. 44)

• Set ISO speed options. (p. 45)

• Use a tripod to prevent your camera from shaking.

When the light source is behind the subject or when there is a high contrast between
the light and dark areas, the subject may come out shaded.

• Avoid shooting with the sun behind your subject.

• Select

• Set the flash option to

• Set the Auto Contrast Balance (ACB) option. (p. 54)

• Adjust the exposure. (p. 54)

• Set the metering option to

mode. (p. 36)

Night in the mode. (p. 34)

Backlight in the mode. (p. 30)

Red-eye or Red-eye Fix. (p. 44)

Fill in. (p. 44)

Spot if a bright subject is in the center of the frame. (p. 55)

7

Red-eye Fix in the edit menu. (p. 73)

Quick reference

Taking photos of people

• mode > Object Highlight  33

mode > Beauty Shot  32

•

• Red-eye, Red-eye Fix (to prevent or correct red-eye)

44



• Face Detection

49



Taking photos at night or in the dark

• mode > Night  34

mode > Sunset, Dawn  30

•

• Flash options

• ISO speed (to adjust the sensitivity to light)

44



45



Taking action photos

• Continuous, Motion Capture  57

Taking photos of text, insects, or
flowers

• mode > Text  30

• Macro, Auto Macro (to take close-up photos)

• White Balance (to change the color tone)

46



55



Taking panoramic photos

•

Panorama mode

 35

Adjusting the exposure (brightness)

• EV (to adjust exposure)  54

• ACB (to compensate for subjects against bright

backgrounds)

• Metering

• AEB (to take three photos of the same scene with

different exposures)

54



55



57



Applying a different effect

• mode > Magic Frame  31

• Smart filter effects

• Image adjustment (to adjust saturation, sharpness, or

contrast)

58



61



Reducing camera shake

• Optical Image Stabilization (OIS)  25
mode

•

 36

8

• Viewing files by category in
Smart Album

• Deleting all files on the
memory card

• Viewing files as a slide
show

• Viewing files on a TV

• Connecting your camera to a

computer

• Adjusting sound and volume

87



• Adjusting the brightness of
the display

• Changing the display
language

• Setting the date and time

• Formatting the memory

card

• Troubleshooting

65



67



68









88



88

77

87

76



88



101



Contents

Basic functions

Unpacking ................................................................... 12

Camera layout ............................................................. 13

Inserting the battery and memory card ....................... 15

Charging the battery and turning your camera on ...... 16

Charging the battery ................................................... 16

Turning on your camera .............................................. 16

Performing the initial setup ......................................... 17

Learning icons ............................................................. 18

Selecting options or menus ........................................ 19

Setting the display and sound .................................... 21

Changing the display type ........................................... 21

Setting the sound ....................................................... 21

Taking photos .............................................................. 22

Zooming .................................................................... 23

Reducing camera shake (OIS) ..................................... 25

Tips for getting a clearer photo ................................... 26

Extended functions

Shooting modes .......................................................... 29

Using the Smart Auto mode ........................................ 29

Using the Scene mode ............................................... 30

Using the Magic Frame mode ..................................... 31

Using the Beauty Shot mode ....................................... 32

Using the Object Highlight mode ................................. 33

Using the Night mode ................................................. 34

Using the Panorama mode .......................................... 35

Using the DUAL IS mode ............................................ 36

............................................................... 11

........................................................ 28

9

Using the Program mode ............................................ 36

Recording a video ...................................................... 37

Using the Smart Scene Detection mode ...................... 38

Recording voice memos ............................................. 40

Recording a voice memo ............................................ 40

Adding a voice memo to a photo ................................. 40

Shooting options

Selecting a resolution and quality ............................... 42

Selecting a resolution .................................................. 42

Selecting image quality ............................................... 42

Using the timer ............................................................ 43

Shooting in the dark .................................................... 44

Preventing red-eye ..................................................... 44

Using the flash ........................................................... 44

Adjusting the ISO speed ............................................. 45

Changing the camera’s focus ..................................... 46

Using macro .............................................................. 46

Using auto focus ........................................................ 46

Using tracking auto focus ............................................ 47

Adjusting the focus area .............................................. 48

Using face detection ................................................... 49

Detecting faces .......................................................... 49

Taking a self-portrait shot ............................................. 50

Taking a smile shot ..................................................... 50

Detecting eye blinking ................................................. 51

Using smart face recognition ...................................... 51

Registering faces as your favorites (My Star) ................. 52

Adjusting brightness and color ................................... 54

............................................................ 41

Contents

Adjusting the exposure manually (EV) ........................... 54

Compensating for backlighting (ACB) ........................... 54

Changing the metering option ...................................... 55

Selecting a light source (White balance) ....................... 55

Using burst modes ...................................................... 57

Improving your photos ................................................ 58

Applying smart filter effects .......................................... 58

Adjusting your photos ................................................. 61

Playback/Editing

............................................................. 62

Playing back ................................................................ 63

Starting Playback mode .............................................. 63

Viewing photos .......................................................... 68

Playing a video ........................................................... 69

Playing voice memos .................................................. 70

Editing a photo ............................................................ 71

Resizing photos ......................................................... 71

Rotating a photo ......................................................... 71

Applying smart filter effects .......................................... 72

Correcting exposure problems .................................... 73

Creating a print order (DPOF) ....................................... 75

Viewing files on a TV ................................................... 76

Transferring files to your Windows computer ............. 77

Transferring files using Intelli-studio ............................... 79

Transferring files by connecting the camera as a removable disk

Disconnecting the camera (for Windows XP) ................. 82

Transferring files to your Mac computer ..................... 83

Printing photos with a PictBridge photo printer ......... 84

.. 81

10

Settings

........................................................................... 85

Camera settings menu ................................................ 86

Accessing the settings menu ...................................... 86

Sound ....................................................................... 87

Display ...................................................................... 87

Settings ..................................................................... 88

Appendixes

..................................................................... 91

Error messages ........................................................... 92

Camera maintenance .................................................. 93

Cleaning your camera ................................................. 93

Using or storing the camera ........................................ 94

About memory cards .................................................. 95

About the battery ........................................................ 97

Before contacting a service center ........................... 101

Camera specifications ............................................... 104

Glossary ..................................................................... 108

FCC notice ................................................................. 112

Index .......................................................................... 113

Basic functions

Learn about your camera’s layout, icons, and basic functions
for shooting.

Unpacking

Camera layout

Inserting the battery and memory card

Charging the battery and turning your camera on

Performing the initial setup

Learning icons

Selecting options or menus

Setting the display and sound

Taking photos

Tips for getting a clearer photo

……………………………………………… 12

…………………………………………… 13

……………… 15

Charging the battery
Turning on your camera

Changing the display type
Setting the sound

Zooming

…………………………………………… 23

Reducing camera shake (OIS)

………………………………… 16

…………………………… 16

…………………………… 17

…………………………………………… 18

…………………………… 19

………………………… 21

…………………………… 21

…………………………………… 21

…………………………………………… 22

……………………… 25

………………………… 26

…… 16

Unpacking

Check your product box for the following items.

Optional accessories

Camera AC adapter/USB cable Rechargeable battery

Strap User Manual CD-ROM Quick Start Guide

• The illustrations may differ from your actual items.

• Purchase Samsung-approved optional items that are compatible with your camera

at the service center or the store where you purchased your camera. We are not
responsible for any damages caused by using items from other manufacturers.

Basic functions

12

Camera case Memory card/

Memory card adapter

A/V cable Battery charger

Camera layout

Before you start, familiarize yourself with your camera's parts and their functions.

Shutter button

POWER button

Flash

Zoom button

• Zoom in or out in Shooting mode.

• Zoom in on part of a photo or view files as thumbnails in

Playback mode.

• Adjust volume in Playback mode.

Speaker

Microphone

AF-assist light/timer lamp

Lens

USB and A/V port

Accepts USB cable or A/V cable

Basic functions

13

Tripod mount

Battery chamber cover

Insert a memory card and battery

Camera layout

Status lamp

• Blinking: When the camera is saving a
photo or video, being read by a computer or
printer, or when the image is out of focus

• Steady: When connecting to the computer,
when out of focus or charging the battery

Mode button: Open the list of shooting modes

Icon Mode Description

The camera automatically selects settings based

Smart Auto

Program

Panorama

Scene

Movie

DUAL IS

on a type of scene (Night, Portrait, Sunset, etc.)
it detects.

The camera sets the shutter speed and aperture
value and lets you set the other options.

This mode lets you shoot a wide scene in one photo.

Take a photo with options preset for a specific
scene (Landscape, Sunset, etc.).

Record a video.

The camera activates options that reduce camera
shake.

Display

Basic functions

Attaching the strap

Refer to the table at the bottom

Button Description

Access options or menus

In Shooting mode While setting

Change the display option Move up

Navigation

Playback

Function

Change the macro option Move down

Change the flash option Move left

Change the timer option Move right

Confirm the highlighted option or menu

Enter Playback mode

• Access options in Shooting mode

• Delete files in Playback mode

14

Inserting the battery and memory card

Learn to insert the battery and an optional memory card into the camera.

Removing the battery and memory card

Insert a memory card with

the gold-colored contacts

facing up.

Insert the battery with the

Samsung logo facing up.

Push the card gently until
the card disengages from
the camera, and then pull it

Memory card

Battery lock

out of the slot.

Push the lock up to release
the battery.

Battery

• You can use the internal memory as a temporary storage device
when the memory card is not inserted.

• Insert a memory card in the correct direction. Inserting a memory
card in the wrong direction may damage your camera and memory
card.

Basic functions

15

Charging the battery and turning your camera on

Charging the battery

Before using the camera for the first time, you must charge the
battery. When connecting the USB cable to the camera, insert
the smaller connector into the camera and the other connector
into the power adapter.

Indicator light

•Red LED is on: Charging

•Red LED is off: Fully charged

Use only the AC adapter and USB cable supplied with your camera. If you
use another AC adapter (such as SAC-48), the camera battery may not
charge or work properly.

Basic functions

Turning on your camera

Press [POWER] to turn your camera on or off.

• The initial setup screen appears when you turn on the camera
for the first time. (p. 17)

Turning on your camera in Playback mode

Press [ ]. The camera turns on and accesses Playback mode
immediately.

When you turn on your camera by pressing and holding [ ] for about
5 seconds, the camera does not emit any camera sounds.

16

Performing the initial setup

The initial setup screen appears to allow you to configure the camera's basic settings.

Press [ ].

1

• The initial setup screen appears when you turn on the camera
for the first time.

Press [ ] to select Language and press [ ] or [ ].

2

Press [ ] or [ ] to select a language and press [ ].

3

Press [ ] or [ ] to scroll to Time Zone and press

4

[

] or [ ].

Press [ ] or [ ] to select a time zone and press [ ].

5

• To set the daylight-saving time, press [ ].

Basic functions

Press [ ] or [ ] to select Date/Time Set and press

6

[

] or [ ].

Press [ ] or [ ] to select an item.

7

Press [ ] or [ ] to set the date and time and press [ ].

8

Press [ ] or [ ] to select Date Type and press

9

[

] or [ ].

Press [ ] or [ ] to select a date format and press [ ].

10

Press [ ] to switch to the Shooting mode.

11

17

Learning icons

The icons displayed will change according to the mode you select or the options you set.

A. Information

Icon Description

Selected shooting mode

Available number of photos

Available recording time

Internal memory

Memory card inserted

• : Fully charged

•

: Partially charged

•

: Charging needed

Voice memo (On)

A

Icon Description

B

B. Icons on the right

C

Icon Description

Auto focus frame

Camera shake

Zoom ratio

Current date and time

Photo resolution

Video resolution

Frame rate

Photo quality

Metering option

Flash option

Timer option

Auto focus option

Face detection

Basic functions

18

C. Icons on the left

Icon Description

Aperture and shutter speed

Long time shutter

Exposure value

White balance

Face tone

Face retouch

ISO speed

Smart filter effect

Image adjustment
(contrast, sharpness, saturation)

Voice muted

Burst type

Optical Image Stabilization (OIS)

Selecting options or menus

You can select options by pressing [ ], and then using the navigation buttons ([ ], [ ], [ ], [ ]). Press [ ] to confirm.

You can also access shooting options by pressing [ ], but some options are not available.

In Shooting mode, press [ ].

1

Use the navigation buttons to scroll to an option or

2

menu.

• To move up or down, press [ ] or [ ].

• To move left or right, press [

Press [ ] to confirm the highlighted option or menu.

3

] or [ ].

Basic functions

Going back to the previous menu

Press [ ] again to go back to the previous menu.

Half-press [Shutter] to return to the Shooting mode.

19

Selecting options or menus

Example: Selecting a White Balance option in the P mode

In Shooting mode, press [ ].

1

Press [ ] or [ ] to scroll to Program, and then

2

press [

This mode allows you to directly set various features
for shooting.

Press [ ].

3

Press [ ] or [ ] to scroll to Shooting, and then

4

press [

Smart Auto

Program

Panorama

Scene

Movie

Shooting

Sound

Display

Settings

Exit

] or [ ].

].

Photo Size

Quality

EV

ISO

White Balance

Smart Filter

Face Detection

Change

Press [ ] or [ ] to scroll to White Balance, and then

5

press [

] or [ ].

Photo Size
Quality
EV
ISO
White Balance
Smart Filter
Face Detection

Exit Back

Press [ ] or [ ] to scroll to a White Balance option.

6

Daylight

Back Move

Press [ ].

7

Basic functions

20

Setting the display and sound

Learn how to change the basic display and sound settings.

Changing the display type

Select a display type for Shooting or Playback mode. Each type
displays different shooting or playback information.

Press [ ] repeatedly to change a display type.

Show all photographic information.

Modes Display Type Choices

• Display all information about shooting

Shooting

Playback

• Hide information about shooting, except the
available number of photos (or available recording
time) and the battery icon

• Display all information about the current photo

• Hide all information about the current file

• Display information about the current file, except the

shooting settings and captured date

Basic functions

Setting the sound

Set whether your camera emits a specified sound when you
operate your camera.

In Shooting or Playback mode, press [ ].

1

Select Sound → Beep Sound → an option.

2

Options Description

Off

1/2/3

21

The camera does not emit any sounds.

The camera emits one of three sounds, depending
on the option you select.

Taking photos

Learn basic actions to take photos easily and quickly in the Smart Auto mode.

In Shooting mode, press [ ].

1

Press [ ] or [ ] to scroll to Smart Auto, and then

2

press [

This mode recognizes the scene automatically.

Align your subject in the frame.

3

].

Smart Auto

Program

Panorama

Scene

Movie

Basic functions

Half-press [Shutter] to focus.

4

• A green frame means the subject in focus.

• A red frame means the subject is out of focus.

Press [Shutter] to take a photo.

5

See page 26 for tips to get clearer photos.

22

Taking photos

Zooming

You can shoot close-up photos by adjusting the zoom. Your
camera has a 5X optical zoom, 2X Intelli zoom, and 5X digital
zoom. Intelli zoom and digital zoom cannot be used at the same
time.

Zoom ratio

Zoom inZoom out

Available zoom ratio for videos differs from photo zoom ratio.

Basic functions

Digital zoom

If the zoom indicator is in the digital range, your camera is using
the digital zoom. By using both the optical zoom and digital zoom,
you can zoom in up to 25 times.

Zoom indicator

Optical range

Digital range

• The Digital zoom is not available with the Smart Filter effect or
Tracking AF option.

• If you capture a photo with the Digital zoom, the photo quality may
deteriorate.

23

Taking photos

Intelli zoom

If the zoom indicator is in the Intelli range, your camera is using the Intelli
zoom. Photo resolution varies according to the zoom rate if you use the
Intelli zoom. By using both the optical zoom and Intelli zoom, you can
zoom in up to 10 times.

Optical range

Photo resolution when
Intelli zoom is on

Zoom indicator

Intelli range

Basic functions

• The Intelli zoom is not available with a Smart Filter effect or Tracking
AF option.

• The Intelli zoom is available only when you set a 4:3 ratio resolution.
If you set another resolution ratio with Intelli zoom on, the Intelli zoom
will be turned off automatically.

• Intelli zoom helps you capture a photo with less quality deterioration
than the digital zoom. However, the photo quality may be lower than
when you use the optical zoom.

Setting Intelli zoom

In Shooting mode, press [ ].

1

Select Shooting → Intelli Zoom → an option.

2

Options Description

Off: Deactivate the Intelli zoom.

On: Activate the Intelli zoom.

24

Taking photos

Reducing camera shake (OIS)

Reduce camera shake optically in Shooting mode.

Before correction After correction

In Shooting mode, press [ ].

1

Select Shooting or Movie → OIS → an option.

2

Options Description

Off: Deactivate the OIS function.

On: Activate the OIS function.

Basic functions

• OIS may not function properly when:

- you move your camera to follow a moving subject

- you use digital zoom

- there is too much camera shake

- the shutter speed is slow (e.g., when in the mode)

- the battery is low

- you take a close-up shot

• If you use the OIS function with a tripod, your images may be blurred
by the vibration of the OIS sensor. Deactivate the OIS function when
you use a tripod.

• If the camera is hit or dropped, the display will be blurry. If this occurs,
turn off the camera, and then turn it on again.

• In some scene modes, the OIS function is unavailable.

25

Tips for getting a clearer photo

Holding your camera correctly

Half-pressing the shutter button

Half-press [Shutter] and adjust the
focus. The camera adjusts the focus and
exposure automatically.

The camera sets the aperture value
and shutter speed automatically.

Focus frame

• Press [Shutter] to take the photo if
the focus frame appears in green.

• Change the composition and half­press [Shutter] again if the focus
frame appears in red.

Make sure nothing is
blocking the lens.

Basic functions

Reducing camera shake

• Set the Optical Image Stabilization option to
reduce camera shake optically. (p. 25)

• Select the
both optically and digitally. (p. 36)

mode to reduce camera shake

When is displayed

Camera shake

When shooting in the dark, avoid setting the flash option to
Slow Sync or Off. The aperture remains open longer and it may be
harder to hold the camera still.

• Use a tripod or set the flash option to Fill in. (p. 44)

• Set ISO speed options. (p. 45)

26

Preventing your subject from being out of focus

It may be difficult to get your subject in focus when:

there is little contrast between the subject and background

-

(for example, when your subject is wearing clothing that is similar in color
to the background)

- the light source behind the subject is too bright

- the subject is shiny or reflective

- the subject includes horizontal patterns, such as blinds

- the subject is not positioned in the center of the frame

Use the focus lock

Half-press [Shutter] to focus. When the subject is in focus,
you can reposition the frame to change the composition.
When you are ready, press [Shutter] to take your photo.

• When you take photos in low light

Turn on the flash.
(p. 44)

• When subjects are moving fast

Use the continuous
or motion capture
function. (p. 57)

Basic functions

27

Extended functions

Learn how to take a photo by selecting a mode and how to
record a video or voice memo.

Shooting modes

Using the Smart Auto mode
Using the Scene mode
Using the Magic Frame mode
Using the Beauty Shot mode
Using the Object Highlight mode
Using the Night mode
Using the Panorama mode
Using the DUAL IS mode
Using the Program mode
Recording a video
Using the Smart Scene Detection mode

Recording voice memos

Recording a voice memo
Adding a voice memo to a photo

………………………………………… 29

………………………… 29

……………………………… 30

……………………… 31

……………………… 32

……………………………… 34

………………………… 35
…………………………… 36
…………………………… 36

…………………………………… 37

……………………………… 40

…………………………… 40

…………………… 33

…………… 38

…………………… 40

Shooting modes

Take photos or record videos by selecting the best shooting mode for the conditions.

Using the Smart Auto mode

In this mode, your camera automatically chooses the appropriate
camera settings based on the type of scene it defects.
Smart Auto Mode is helpful if you are not familiar with the camera
settings for various scenes.

In Shooting mode, press [ ].

1

Select Smart Auto.

2

Align your subject in the frame.

3

• The camera selects a scene automatically. An appropriate
scene mode icon appears at the top left of the screen. The
icons are listed below.

Icon Description

Appears when taking photos of landscapes.

Appears when taking photos with bright white
backgrounds.

Extended functions

Icon Description

Appears when taking photos of landscapes at night.
This is available only when the flash is off.

Appears when taking portraits at night.

Appears when taking photos of landscapes with
backlighting.

Appears when taking portraits with backlighting.

Appears when taking portraits.

Appears when taking close-up photos of objects.

Appears when taking close-up photos of text.

Appears when taking photos of sunsets.

Appears when taking photos of clear skies.

Appears when taking photos of forested areas.

Appears when taking close-up photos of colorful
subjects.

Appears when the camera is stable (on a tripod, for
example) and the subject is motionless for a period
of time. This is available only when you are shooting
in the dark.

Appears when taking photos of actively moving
subjects.

Appears when taking photos of fireworks. This is
available only when you use a tripod.

29

Shooting modes

Half-press [Shutter] to focus.

4

Press [Shutter] to take the photo.

5

• If the camera does not recognize a proper scene mode, appears
and the camera uses default settings.

• Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.

• The camera may not select the correct scene depending on the
shooting condtions, such as camera shake, lighting, and distance
to the subject.

• Even if you use a tripod, the camera may not detect the
depending on the subject's movement.

• In

mode, the camera consumes more battery power, because

it changes settings often to select appropriate scenes.

mode

Using the Scene mode

Take a photo with options preset for a specific scene.

In Shooting mode, press [ ].

1

Select Scene → a scene.

2

Magic Frame

Beauty Shot

Object Highlight

Night

Landscape

Text

Sunset

This mode is appropriate for scenic photography.

• To change the scene mode, press [ ], and then select

Scene → a scene.

• For the Magic Frame mode, see “Using the Magic Frame
mode" on page 31.

• For the Beauty Shot mode, see “Using the Beauty Shot
mode" on page 32.

• For the Object Highlight mode, see “Using the Object Highlight
mode" on page 33.

• For the Night mode, see “Using the Night mode” on page 34.

Extended functions

30

Shooting modes

Align your subject in the frame, and then half-press

3

[Shutter] to focus.

Press [Shutter] to take the photo.

4

Using the Magic Frame mode

In Magic Frame mode, you can apply various frame effects to
your photos. The shape and the feel of the photos will change
according to the frame you select.

In Shooting mode, press [ ].

1

Select Scene → Magic Frame.

2

Press [ ].

3

Select Shooting → Frame → an option.

4

Frame

Extended functions

Back

Align your subject in the frame, and then half-press

5

[Shutter] to focus.

Press [Shutter] to take the photo.

6

• In Magic Frame mode, the resolution is automatically set to .

• When you connect the camera to a TV in Magic Frame mode, you

cannot capture photos.

31

Move

Shooting modes

Using the Beauty Shot mode

Take a photo of a person with options to hide facial imperfections.

In Shooting mode, press [ ].

1

Select Scene → Beauty Shot.

2

To make the subject's skin tone appear lighter (face

3

only), press [
facial imperfections, press [

5.

Select Shooting → Face Tone → an option.

4

• Select a higher setting to make skin tone appear lighter.

Level 2

Back Move

To hide facial imperfections, press [ ].

5

], and then go to Step 4. To hide

], and then go to Step

Select Shooting → Face Retouch → an option.

6

• Select a higher setting to hide a greater number of
imperfections.

Level 2

Back Move

Align your subject in the frame, and then half-press

7

[Shutter] to focus.

Press [Shutter] to take the photo.

8

When using the Beauty Shot mode, the focus distance will be set to
Auto Macro.

Extended functions

32

Shooting modes

Using the Object Highlight mode

Object Highlight mode makes the subject more distinguishable by
adjusting the depth of field.

In Shooting mode, press [ ].

1

Select Scene → Object Highlight.

2

Position the camera according to the optimum distance

3

displayed on the screen.

• The optimum distance will vary, based on the zoom ratio you
use.

Press [ ].

4

Select Shooting → Object Highlight Effect.

5

Select an option to adjust Blur or Tone.

6

• Blur: The higher the value, the more intense the blur effect in
the photo.

• Tone: The higher the value, the brighter the photo.

Blur

Tone

Object Highlight Effect

Half-press [Shutter] to focus.

7

• When the camera can apply the object highlight effect,
(

) will appear.

• When the camera cannot apply the object highlight effect,
(

) will appear. If this occurs, adjust the distance from the

camera to the subject.

Press [Shutter] to take the photo.

8

• Available resolutions in Object Highlight mode are ( ).

• If the shooting distance is not within the optimum range, you can

capture a photo but the object highlight effect will not be applied.

• The object highlight effect cannot be used in dark places.

• The object highlight effect cannot be used with the optical zoom at

3X or higher.

• Digital zoom is not available in Object Highlight mode.

• Use a tripod to prevent camera shake as the camera captures 2

consecutive photos to apply the effect.

• The subject and the background should have a significant contrast
in color.

• Subjects should be positioned far away from the background for the
greatest effect.

Back

Move

Extended functions

33

Shooting modes

Using the Night mode

Use the Night mode to take a photo with options for preset for
shooting at night. Use a tripod to prevent your camera from
shaking.

In Shooting mode, press [ ].

1

Select Scene → Night.

2

Align your subject in the frame, and then half-press

3

[Shutter] to focus.

Press [Shutter] to take the photo.

4

Adjusting the exposure in the Night mode

In Night mode, you can use a slow shutter speed to extend
the time until the shutter closes. Increase the aperture value to
prevent overexposure.

In Shooting mode, press [ ].

1

Select Scene → Night.

2

Press [ ].

3

Select Shooting → Long Time Shutter.

4

Select the aperture value or shutter speed.

5

AUTO

Aperture

Back Move

Select an option.

6

• If you select AUTO, the camera adjusts the aperture value or
shutter speed automatically.

Align your subject in the frame, and then half-press

7

[Shutter] to focus.

Press [Shutter] to take the photo.

8

Use a tripod to prevent your photos from blurring.

AUTO

Aperture value
Shutter speed

Extended functions

34

Shooting modes

Using the Panorama mode

In Panorama mode, the camera captures and combines a series
of photos to create a panoramic image.

In Shooting mode, press [ ].

1

Select Panorama.

2

• The Up/Down/Left/Right arrows appear on the display.

Align your subject in the frame, and then half-press

3

[Shutter] to focus.

Hold and press [Shutter] to start Panorama shooting.

4

While pressing and holding [Shutter], slowly move the

5

camera in the desired direction.

• The arrow for the direction you are moving in is displayed in
blue and the preview box for the images appears.

Extended functions

▼ When rotating the camera to the right

The direction you are moving
the camera in

Release [Shutter] to finish shooting.

6

• A panoramic image is created.

• If you release the [Shutter] while shooting, the panoramic

shooting stops and photos that have been taken are saved.

• Depending on the camera movement or shooting environment below,
photos may not be smoothly connected.

- there is excessive camera shake

- you take a close-up shot

- the environment is too dark

- when shooting under a flashing light, e.g., a fluorescent lamp

- when the brightness, color or focus changes rapidly during shooting

• Photos that have been taken up until the cases below occur are
saved automatically, and shooting is stopped forcibly.

- the camera is moving too fast

- you are changing the direction of the camera while shooting

- the camera is not moving

• Since the last scene in Panorama mode may not be taken due to the
quality of the photo if shooting is halted, it is recommended to shoot
beyond the desired ending point.

35

Shooting modes

Using the DUAL IS mode

Reduce camera shake and prevent blurred photos with Optical
and Digital Image Stabilization functions.

Before correction After correction

In Shooting mode, press [ ].

1

Select DUAL IS.

2

Align your subject in the frame, and then half-press

3

[Shutter] to focus.

Press [Shutter] to take the photo.

4

• The Digital zoom and Intelli-zoom are not available in mode.

• The camera corrects the photo optically only if the light source is

brighter than fluorescent light.

• If your subject is moving rapidly, the photo may be blurry.

• Set the Optical Image Stabilization option to reduce camera shake in

different shooting modes. (p. 25)

Extended functions

Using the Program mode

In the Program mode, you can set various options except
the shutter speed and aperture value, which the camera sets
automatically.

In Shooting mode, press [ ].

1

Select Program.

2

Set options.

3

(For a list of options, refer to

Align your subject in the frame, and then half-press

4

[Shutter] to focus.

Press [Shutter] to take the photo.

5

36

“Shooting options”.)

Shooting modes

Recording a video

In Movie mode, you can record high-definition videos in 1280 X 720 HQ
resolution. You can record up to 4 GB (approximately 17 minutes) at
1280 X 720 HQ resolution and the camera saves recorded videos as
MJPEG files.

• Some memory cards may not support high definition recording. If this
occurs, set a lower resolution. (p. 42)

• Memory cards with slow writing speeds will not support high
resolution videos and high-speed videos. To record high-resolution or
high-speed videos, use memory cards with faster writing speeds.

• If you have activated the Optical Image Stabilization, the camera may
record your video with the sounds the OIS makes when operating.

In Shooting mode, press [ ].

1

Select Movie.

2

Press [ ].

3

Select Movie → Frame Rate → a frame rate (the

4

number of frames per second).

• As the frame rate increases, action appears more natural, but
the file size also increases.

Depending on the resolution and frame rate, the movie may appear smaller
than the original size shown on the main display.

Extended functions

Press [ ].

5

Select Movie → Sound Alive → a sound option.

6

Option Description

Sound Alive On: Turn on the Sound Alive function.

Sound Alive Off: Turn off the Sound Alive function.

Mute: Do not record sounds.

Set other options as desired.

7

(For options, refer to “Shooting options”.)

Press [Shutter] to start recording.

8

Press [Shutter] again to stop recording.

9

• Do not block the microphone when you use the Sound Alive function.

• Recordings made with Sound Alive may differ from actual sounds.

37

Shooting modes

To pause recording

The camera allows you to pause a video temporarily while
recording. With this function, you can record several scenes as a
single video.

Press [

] to pause while recording. Press it again to resume.

Stop Pause

Extended functions

Using the Smart Scene Detection mode

In this mode, your camera automatically chooses the appropriate
camera settings based on a detected type of scene.

In Shooting mode, press [ ].

1

Select Movie.

2

Press [ ].

3

Select Movie → Smart Scene Detection → On.

4

Align your subject in the frame.

5

• The camera selects a scene automatically. An appropriate
mode icon will appear at the top left of the screen.

Icon Description

Appears when recording videos of landscapes.

Appears when recording videos of clear skies.

38

Shooting modes

Icon Description

Appears when recording videos of forested areas.

Appears when recording videos of sunsets.

Press [Shutter] to start recording.

6

Press [Shutter] again to stop recording.

7

• If the camera does not recognize a proper scene mode, will not
change and the default settings will be used.

• The camera may not select the correct scene depending on shooting
environments, such as camera shake, lighting and distance to the
subject.

• In Smart Scene Detection mode, you cannot set smart filter effects.

Extended functions

39

Recording voice memos

Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of
shooting conditions.

You will get the best sound quality when recording 16 inches (40 cm.) away from the camera.

Recording a voice memo

In Shooting mode, press [ ].

1

Select Shooting → Voice → Record.

2

Press [Shutter] to record.

3

• You can record voice memos of up to 10 hours in length.

• Press [

Press [Shutter] to stop.

4

• Press [Shutter] again to record a new voice memo.

Press [ ] to switch to Shooting mode.

5

] to pause or resume recording.

Stop Pause

Extended functions

Adding a voice memo to a photo

In Shooting mode, press [ ].

1

Select Shooting → Voice → Memo.

2

Align your subject in the frame, and then take a photo.

3

• Begin recording the voice memo right after taking the photo.

Record a short voice memo (10 seconds maximum).

4

• Press [Shutter] to stop recording a voice memo before the
10 seconds are up.

You cannot add voice memos to photos if you set Continuous, Motion
Capture, or AEB options.

40

Shooting options

Learn about the options you can set in shooting mode.

Selecting a resolution and quality

Selecting a resolution
Selecting image quality

Using the timer

Shooting in the dark

Preventing red-eye
Using the flash
Adjusting the ISO speed

Changing the camera’s focus

Using macro
Using auto focus
Using tracking auto focus
Adjusting the focus area

Using face detection

Detecting faces
Taking a self-portrait shot
Taking a smile shot
Detecting eye blinking
Using smart face recognition
Registering faces as your favorites (My Star)

…………………… 42

…………………… 42

……………………………… 43

……………………… 44

……………………… 44

…………………………… 44

………………… 45

…………… 46

……………………………… 46

………………………… 46

………………… 47

………………… 48

……………………… 49

…………………………… 49

………………… 50

……………………… 50

…………………… 51

…………… 51

………… 42

… 52

Adjusting brightness and color

Adjusting the exposure manually (EV)
Compensating for backlighting (ACB)
Changing the metering option
Selecting a light source (White balance)

Using burst modes

………………………… 57

Improving your photos

Applying smart filter effects
Adjusting your photos

…………… 54

…………… 55

…………………… 58

……………… 58

…………………… 61

…… 54
…… 54

… 55

Selecting a resolution and quality

Learn how to change the image resolution and quality settings.

Selecting a resolution

As you increase the resolution, your photo or video will include
more pixels, so it can be printed on larger paper or displayed on
a larger screen. When you use a high resolution, the file size also
increases.

When taking a photo

In Shooting mode, press [ ].

1

Select Shooting → Photo Size → an option.

2

Option Description

4608 X 3456: Print on A1 paper (23" x 34").

4608 X 3072: Print on A1 paper (23" x 34") in wide ratio

(3:2).

4608 X 2592: Print on A2 paper (17" x 22") in panorama
ratio (16:9) or play back on an HDTV.

3648 X 2736: Print on A3 paper (12" x 17").

2592 X 1944: Print on A4 paper (8 1/2" x 11").

1984 X 1488: Print on A5 paper (5 3/4" x 8 1/2").

1920 X 1080: Print on A5 paper in panorama ratio (16:9)

or play back on an HDTV (5 3/4" x 8 1/2").

1024 X 768: Attach to email.

The paper sizes in inches are approximate.

Shooting options

When recording a video

In Shooting mode, press [ ].

1

Select Movie → Movie Size → an option.

2

Option Description

1280 X 720 HQ: For high-quality play back on an HDTV.

640 X 480: For play back on a standard, analog TV.

320 X 240: To post on a web page.

Selecting image quality

The camera compresses and saves the photos you take in JPEG
format. Higher quality images result in larger file sizes.

In Shooting mode, press [ ].

1

Select Shooting → Quality → an option.

2

Option Description

Super Fine: Capture photos in super high quality.

Fine: Capture photos in high quality.

Normal: Capture photos in normal quality.

The options may differ depending on the shooting mode.

42

Using the timer

Learn how to set the timer to delay shooting.

In Shooting mode, press [ ].

1

Off

Select an option.

2

Option Description

Off: The timer is not active.

10 Sec: Takes a photo in 10 seconds.

2 Sec: Takes a photo in 2 seconds.

Double: Takes a photo in 10 seconds, and then takes

another 2 seconds later.

The options may differ depending on the shooting mode.

Shooting options

Press [Shutter] to start the timer.

3

• The AF-assist light/timer lamp blinks. The camera
automatically takes a photo at the specified time.

• Press [Shutter] or [ ] to cancel the timer.

• Depending on the face detection option you have selected, the timer

function or some timer options may not be available.

• When you set burst options, you cannot use the timer function.

43

Shooting in the dark

Learn how to take photos at night or in low light conditions.

Preventing red-eye

If the flash fires when you take a photo of a person in the dark,
a red glow may appear in the person's eyes. To prevent this,
select Red-eye or Red-eye Fix. Refer to flash options in "Using
the flash".

Shooting options

Using the flash

Use the flash when taking photos in the dark or when you need
more light in your photos.

In Shooting mode, press [ ].

1

Select an option.

2

Option Description

Auto

Off:

• The flash does not fire.

• The camera displays the camera shake warning (

when you are shooting in low light.

Red-eye Fix*:

• The flash fires twice when the subject or background
is dark.

• The camera corrects red-eyes through its advanced
software analysis.

44

)

Shooting in the dark

Option Description

Slow Sync:

• The flash fires and the shutter stays open longer.

• This option is recommended when you want to

capture ambient light to reveal more details in the
background.

• Use a tripod to prevent your photos from blurring.

• The camera will display the shake warning (

you are shooting in low light.

Fill in:

• The flash always fires.

• The camera adjusts light intensity automatically.

Red-eye*:

• The flash fires when the subject or background is
dark.

• The camera reduces red-eyes.

Auto: The flash fires automatically when the subject or
background is dark.

Auto: The camera selects a proper flash setting for the
scene it detects in the

The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until

the flash fires a second time.

mode.

) when

Shooting options

• Flash options are not available if you set Continuous, Motion Capture,
AEB options or select Self-Portrait or Blink Detection.

• Make sure that your subjects are within the recommended distance
from the flash. (p. 104)

• If light from the flash is relected or there is a large amount of dust in
the air, tiny spots may appear in your photo.

Adjusting the ISO speed

The ISO speed is the measure of a film’s sensitivity to light as
defined by the International Organization for Standardization (ISO).
The higher ISO speed you select, the more sensitive to light your
camera becomes. With a higher ISO speed, you can get a better
photo without using the flash.

In Shooting mode, press [ ].

1

Select Shooting → ISO → an option.

2

• Select to use an appropriate ISO speed based on the
brightness of the subject and lighting.

• The higher ISO speed you select, the more image noise you may get.

• When you select Motion Capture, the camera sets the ISO speed

to Auto.

45

Changing the camera’s focus

Learn how to adjust the camera's focus.

Using macro

Use macro to take close-up photos of subjects, such as flowers
or insects. Refer to macro options in “Using auto focus”.

• Try to hold the camera very still to prevent blurry photos.

• Turn off the flash if the distance to the subject is less than 16 in.

(40 cm.)

Shooting options

Using auto focus

To take sharp photos, select the appropriate focus according to
your distance from the subject.

In Shooting mode, press [ ].

1

Select an option.

2

Option Description

Normal (AF): Focus on a subject farther than 31.5 in.
(80 cm) from the camera. Farther than 59 in. (150 cm)
when using the zoom.

Macro: Focus on a subject 2 in. to 31.5 in. (5 - 80 cm )
from the camera. 39 in. to 59 in. (100 cm - 150 cm)
when using the zoom.

The options may differ depending on the shooting mode.

Normal (AF)

46

Changing the camera’s focus

Using tracking auto focus

Tracking AF allows you to track and auto focus on your subject,
even when you are moving.

In Shooting mode, press [ ].

1

Select Shooting → Focus Area → Tracking AF.

2

Focus on the subject you want to track, and then press [ ].

3

• A focus frame appears on the subject and follows the subject
as you move the camera.

• The white frame means that your camera is tracking the
subject.

• The green frame means that your subject is in focus when you
half-press [Shutter].

Shooting options

• If you do not select a focus area, the focus frame will appear in the
center of the screen.

• Tracking a subject may fail when:

- the subject is too small or the subject moves excessively

- the subject is backlit or you are shooting in a dark place

- colors or patterns on the subject and the background are the
same

- the camera shakes excessively

• When tracking a subject fails, the focus frame will appear as a white
single-line frame (

• If the camera fails to track the subject, you must reselect the subject
to track.

• If the camera fails to fix the focus, the focus frame changes to a red,
single-line frame (

• If you use this function, you cannot set self timer options, Face
Detection options and Smart Filter options.

).

).

47

Changing the camera’s focus

Adjusting the focus area

You can get clearer photos by selecting an appropriate focus
area according to your subject’s location in the scene.

In Shooting mode, press [ ].

1

Select Shooting → Focus Area → an option.

2

Option Description

Center AF: Focus on the center. Suitable when subjects
are located in the center.

Multi AF: Focus on one or more of 9 possible areas.

Tracking AF: Focus on and track the subject. (p. 47)

The options may differ depending on the shooting mode.

Shooting options

48

Using face detection

If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera
adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to
capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.

• The camera automatically tracks the registered face.

• Face detection may not be effective when:

- the subject is far from the camera (The focus frame will appear
orange for Smile Shot and Blink Detection.)

- it is too bright or too dark

- the subject is not facing the camera

- the subject is wearing sunglasses or a mask

- the subject is in backlit or the lighting condition is unstable

- the subject’s facial expression changes remarkably

• Face detection is not available when using a smart filter effect, or
image adjustment option or when used with Tracking AF.

• Depending on the face detection option you selected, the timer or
some timer options are not available.

• Depending on the face detection option you selected, some burst
options are not available.

• When you take photos of detected faces, they will be registered in
the face list.

• You can view registered faces in order of priority in Playback mode.
(p. 64) Even though faces are registered successfully, they may not
be classified in Playback mode.

• The detected face in Shooting mode may not appear in the face list
or Smart Album.

Shooting options

Detecting faces

Your camera automatically detects human faces (up to 10 faces
in one scene).

The nearest face appears in
a white focus frame and the
rest of the faces appear in
gray focus frames.

In Shooting mode, press [ ].

1

Select Shooting → Face Detection → Normal.

2

• The closer you are to the subject, the quicker your camera detects
faces.

• The detected faces may not be registered if you set burst options
such as Continuous, Motion Capture, AEB.

49

Using face detection

Taking a self-portrait shot

Take photos of yourself. The camera automatically sets the photo
distance to close-up and emits a beep when ready.

When faces are located in the center,
the camera beeps rapidly.

In Shooting mode, press [ ].

1

Select Shooting → Face Detection → Self-Portrait.

2

When you hear a beep, press [Shutter].

3

If you turn Volume off in the sound settings, the camera will not emit a beep. (p. 87)

Shooting options

Taking a smile shot

The camera automatically releases the shutter when it detects a
smiling face.

When your subject smiles broadly,
your camera can detect the smile
more easily.

In Shooting mode, press [ ].

1

Select Shooting → Face Detection → Smile Shot.

2

Compose your shot.

3

• The camera automatically releases the shutter when it detects
a smiling face.

50

Using face detection

Detecting eye blinking

If your camera detects closed eyes, it automatically takes two
photos in succession.

In Shooting mode, press [ ].

1

Select Shooting → Face Detection → Blink

2

Detection.

• Hold your camera still while “Capturing” is displayed on the screen.

• When blink detection fails, the “Picture taken with eyes closed.”

message appears. Take another photo.

Shooting options

Using smart face recognition

The camera automatically registers faces that you frequently
photograph (up to 10 people). This feature will automatically
prioritize the focus on those faces. This feature is available only
when you use a memory card.

In Shooting mode, press [ ].

1

Select Shooting → Face Detection → Smart Face

2

Recognition.

• The nearest face appears in a white focus frame and the rest
of the faces appear in gray focus frames.

•

: Indicate favorite faces (To register favorite faces, see

page 52).

•

: Indicate faces that the camera automatically registers.

51

Using face detection

• The camera may recognize and register faces incorrectly depending
on lighting conditions, remarkable changes in the subject's pose or
face, and whether or not the subject is wearing glasses.

• The camera can automatically register up to 12 faces. If the camera
recognizes a new face when there are 12 registered faces, it will
replace the face in the lowest priority with the new one.

• The camera can detect up to 5 faces in one scene.

Shooting options

Registering faces as your favorites (My Star)

You can register your favorite faces to prioritize the focus and
exposure on those faces. This feature is available only when you
use a memory card.

In Shooting mode, press [ ].

1

Select Shooting → Smart FR Edit → My Star.

2

Align your subject’s face with the oval guideline and

3

press [Shutter] to register the face.

Back Set

• If the subject’s face is not aligned with the oval guideline, the white
frame will not appear.

• Capture photos of one person at a time when registering faces.

• Capture 5 photos the subject’s face for best results: one each from

the front, left, right, above, and below.

• When capturing photos from the left, right, above, and below, instruct
the subject not to turn his or her face more than 30 degrees.

• You can register a face even if you capture only one photo of the
subject's face.

52

Using face detection

When you are finished taking the photos, the face list

4

appears.

• Your favorite faces are indicated with a on the face list.

• You can register up to 8 favorite faces.

• The flash option will be set to Off.

• If you register the same face twice, you can delete one of the faces

in the face list.

Viewing your favorite faces

In Shooting mode, press [ ].

1

Select Shooting → Smart FR Edit → Face List.

2

• To change the ranking of the favorite faces, press [ ] and select

Edit Ranking. (p. 64)

• To cancel the favorite faces, press [

] and select Delete. (p. 64)

Shooting options

53

Adjusting brightness and color

Learn how to adjust the brightness and color for better image quality.

Adjusting the exposure manually (EV)

Depending on the intensity of the ambient light, your photos
may be too bright or dark. In these cases, you can adjust the
exposure to get a better photo.

Darker (-) Neutral (0) Brighter (+)

In Shooting mode, press [ ].

1

Select Shooting or Movie → EV.

2

Select a value to adjust the exposure.

3

• Once you adjust the exposure, the setting will remain the same. You
may need to change the exposure value later to avoid overexposure
or underexposure.

• If you cannot decide on an appropriate exposure, select AEB (Auto
Exposure Bracket). The camera takes three photos, each with a
different exposure: normal, underexposed, and overexposed. (p. 57)

Shooting options

Compensating for backlighting (ACB)

When the light source is behind your subject or there is high
contrast between your subject and the background, your subject
is likely to appear dark in the photo. If this occurs, turn the Auto
Contrast Balance (ACB) option on.

Without ACB With ACB

In Shooting mode, press [ ].

1

Select Shooting → ACB → an option.

2

Option Description

Off: ACB is off.

On: ACB is on.

The ACB feature is not available when you set Continuous, Motion
Capture, AEB options.

54

Adjusting brightness and color

Changing the metering option

The metering mode refers to the way in which a camera
measures the quantity of light. The brightness and lighting of your
photos will vary depending on the metering mode you select.

In Shooting mode, press [ ].

1

Select Shooting or Movie → Metering → an option.

2

Option Description

Multi:

• Your camera divides the scene into several areas, and
then measures the light intensity of each area.

• Suitable for general photos.

Spot:

• Your camera measures only the light intensity of the
very center of the frame.

• If a subject is not in the center of the scene, your
photo may be improperly exposed.

• Suitable for a subject with backlighting.

Center-weighted:

• Your camera averages the meter reading of the entire
frame with emphasis placed on the center.

• Suitable for photos with subjects in the center of the
frame.

Shooting options

Selecting a light source (White balance)

The color of your photo depends on the type and quality of
the light source. If you want the color of your photo to be
realistic, select a white balance setting that matches the lighting
conditions, such as Daylight, Cloudy, or Tungsten.

(Auto WB) (Daylight)

(Cloudy) (Tungsten)

55

Adjusting brightness and color

In Shooting mode, press [ ].

1

Select Shooting or Movie → White Balance → an

2

option.

Icon Description

Auto WB: Automatically sets the white balance based
on the lighting conditions.

Daylight: Select when taking outdoor photos on a
sunny day.

Cloudy: Select when taking outdoor photos on a cloudy
day or in shadows.

Fluorescent_H: Select when shooting under a daylight
fluorescent or three-way fluorescent light.

Fluorescent_L: Select when shooting under white
fluorescent light.

Tungsten: Select when taking indoor photos under
incandescent bulbs or halogen lamps.

Measure: Shutter (Custom Set): Use white balance
settings you defined. (See procedure at right.)

Shooting options

Defining your own white balance

In Shooting mode, press [ ].

1

Select

2

3

4

Shooting or Movie

Measure: Shutter (Custom Set).

Aim the lens at a piece of white paper.

Press [Shutter].

56

→ White Balance →

Using burst modes

It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
In these cases, select one of the burst modes to take multiple pictures rapidly.

In Shooting mode, press [ ].

1

Select Shooting → Drive → an option.

2

Option Description

Single: Take a single photo.

Continuous:

• While you are pressing [Shutter], the camera takes
photos continuously.

• The maximum number of photos depends on the
capacity of your memory card.

Motion Capture:

• While you are pressing [Shutter], the camera takes
VGA photos (6 photos per second; maximum of 30
photos).

AEB:

• Take 3 photos with different exposures: normal,
underexposed, and overexposed.

• Use a tripod to prevent blurry photos.

The options may differ depending on the shooting mode.

• You can use the flash, timer, ACB, and Smart Filter only when
you select Single.

• When you select Motion Capture, the resolution is set to VGA
and the ISO speed is set to Auto.

• Depending on the face detection option you selected, some
burst options are not available.

Shooting options

57

Improving your photos

Learn how to improve your photos by applying smart filter effects, or make some adjustments.

Applying smart filter effects

Apply various filter effects to your photos to create unique images.

Miniature Vignetting

Fish-eye Sketch

In Shooting mode, press [ ].

1

Select Shooting or Movie → Smart Filter.

2

Select an effect.

3

Shooting options

Available filters in Program, and DUAL IS modes

Option Description

Normal: No effect.

Miniature: Apply a tilt-shift effect to make the subject

appear in miniature.

Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.

Half Tone Dot: Apply a halftone effect.

Sketch: Apply a pen sketch effect.

Fish-eye: Blacken the edges of the frame and distort

objects to imitate the visual effect of a fisheye lens.

Defog: Make a photo clearer.

Classic: Apply a black and white effect.

Retro: Apply a sepia tone effect.

Negative: Apply a negative film effect.

Custom RGB: Customize a color value.

58

Improving your photos

Available filters in Movie mode

Option Description

Normal: No effect.

Palette Effect 1: Create a vivid look with sharp contrast

and red color.

Palette Effect 2: Making scenes clean and clear by
applying a soft blue tone.

Palette Effect 3: Apply a soft brown tone.

Palette Effect 4: Create a cold and monotone effect.

Miniature: Apply a tilt-shift effect to make the subject

appear in miniature.

Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.

Fish-eye: Distort close objects to imitate the visual effect
of a fisheye lens.

Defog: Make a photo clearer.

Classic: Apply a black and white effect.

Retro: Apply a sepia tone effect.

Negative: Apply a negative film effect.

Custom RGB: Customize a color value.

Shooting options

• If you select Miniature when you are recording a video, the speed of
the video playing time will increase.

• If you select Miniature when you are recording a video, the camera
will not record sound.

• If you select Miniature, Vignetting, Fish-eye or Defog while recording
a video, the recording speed will be set to and the recording
resolution will be set to less than .

• If you set Smart Filter effects, you cannot use the Face Recognition
options, ACB, burst options, Image Adjustment options, Intelli zoom
or Tracking AF.

• When you select Sketch, the resolution will change to and below.

59

Improving your photos

Defining your own RGB tone

In Shooting mode, press [ ].

1

Select Shooting or Movie → Smart Filter →

2

Custom RGB.

Select a color (R: Red, G: Green, B: Blue).

3

Back Move

Adjust the amount of the selected color.

4

(-: less or +: more)

Select [ ].

5

Shooting options

60

Improving your photos

Adjusting your photos

Adjust the contrast, sharpness, and saturation of your photos.

In Shooting mode, press [ ].

1

Select Shooting → Image Adjust.

2

Select an adjustment option.

3

• Contrast

• Sharpness

• Saturation

Select a value to adjust the selected item.

4

Contrast option Description

-

+

Sharpness option Description

-

+

Decrease the color and brightness.

Increase the color and brightness.

Soften the edges on your photos. Suitable
for editing the photos on your computer.

Sharpen the edges to improve the clarity
of your photos. This may also increase the
noise on your photos.

Shooting options

Saturation option Description

-

+

• Select 0 if you do not want to apply any effects (suitable for printing).

• If you use this function, you cannot set the face recognition and

smart filter options.

Decrease the saturation.

Increase the saturation.

61

Playback/Editing

Learn how to play back photos, videos, or voice memos and edit photos or videos.
You will also learn how to connect your camera to your photo printer or TV.

Playing back

Starting Playback mode
Viewing photos
Playing a video
Playing voice memos

Editing a photo

Resizing photos
Rotating a photo
Applying smart filter effects
Correcting exposure problems
Creating a print order (DPOF)

Viewing files on a TV

………………………………… 63

…………………………… 68

…………………………… 69

…………………… 70

……………………………… 71

…………………………… 71

………………………… 71

……………………… 76

………………… 63

……………… 72

…………… 73

…………… 75

Transferring files to your Windows computer

Transferring files using Intelli-studio
Transferring files by connecting the camera
as a removable disk
Disconnecting the camera (for Windows XP)

Transferring files to your Mac computer

Printing photos with a PictBridge photo
printer

……………………………………… 84

……………………… 81

……… 79

… 77

… 82

… 83

Playing back

Learn how to play back photos, videos, or voice memos, and manage files.

Starting Playback mode

View photos or play videos and voice memos stored in your
camera.

Press [ ].

1

• The most recent file will be displayed.

• If the camera is off, it will turn on and display the most recent

file.

Press [ ] or [ ] to scroll through files.

2

• Press and hold to scroll through files quickly.

• If you want to view files stored in the internal memory, remove your

memory card.

• The camera will not properly play back files that are too large or those
taken with cameras from other manufacturers.

Playback/Editing

Display in Playback mode

Information

Icon Description

Photo includes a voice memo

Video file

Print order has been set (DPOF)

Protected file

Photo includes a registered face; Available only when you
use a memory card

Folder name – File name

To display file information on the screen, press [ ].

63

Playing back

Ranking your favorite faces

You can rank your favorite faces. This feature is available only
when you use a memory card.

In Playback mode, press [ ].

1

Select File Options → Face List Edit → Edit Ranking.

2

Select a face from the list and press [ ].

3

Face List Edit

SetBack

Press [ ] or [ ] to change the ranking of the face,

4

and press [

].

Playback/Editing

Canceling your favorite faces

You can delete your favorite faces. This feature is available only
when you use a memory card.

In Playback mode, press [ ].

1

Select File Options → Face List Edit → Delete.

2

Select a face and press [ ].

3

Press [ ].

4

Select Yes.

5

64

Playing back

Viewing files by category in Smart Album

View and manage files by categories, such as date, file type, or
week.

In Playback mode, rotate [Zoom] left.

1

Press [ ].

2

Select a category.

3

Type

Date

Color

Week

Face

Back Set

Option Description

Type

Date

Color

Week

Face

View files by file type.

View files by the date they were saved.

View files by the dominant color of the image.

View files by the weekday they were saved.

View files by recognized faces and favorite faces.
(Up to 20 people)

Playback/Editing

Press [ ] or [ ] to scroll through files.

4

• Press and hold to scroll through files quickly.

Press [ ] to return to the normal view.

5

• When selecting Color, Etc is shown if color is not extracted.

• It may take some time for the camera to open Smart Album or to

change the category and recognize files.

65

Playing back

Viewing files as thumbnails

Scan thumbnails of files.

In Playback mode, rotate [Zoom] left to display 9 or
20 thumbnails. Rotate [Zoom] right to return to the
previous mode.

Filter

To Do this

Scroll through files

Delete files

Press [ ], [ ], [ ] or [ ].

Press [ ], and then select Yes.

Playback/Editing

Protecting files

Protect your files from accidental deletion.

In Playback mode, press [ ].

1

Select File Options → Protect → Select.

2

To protect all files, select All → Lock.

3

To protect a single file, select the file you want to protect,

4

and then press [

• Press [ ] again to cancel your selection.

Select Set

Repeat Step 4 to protect additional files individually.

5

Press [ ].

6

You cannot delete or rotate a protected file.

].

Protected file

66

Playing back

Deleting files

Delete single files or all files at once.

You cannot delete protected files.

Deleting a single file

You can select one file, and then delete it.

In Playback mode, select a file, and then press [ ].

1

When the pop-up message appears, select Yes.

2

Deleting multiple files

You can select multiple files, and then delete them at once.

In Playback mode, press [ ].

1

When the pop-up message appears, select Multiple

2

Delete.

Select the files you want to delete, and then press [ ].

3

• Press [ ] again to cancel your selection.

Press [ ].

4

When the pop-up message appears, select Yes.

5

Playback/Editing

Deleting all files

You can select all files, and then delete them at once.

In Playback mode, press [ ].

1

Select File Options → Delete → All.

2

When the pop-up message appears, select Yes.

3

Copying files to the memory card

You can copy files from the internal memory to a memory card.

In Playback mode, press [ ].

1

Select File Options → Copy to Card.

2

Select Yes to copy files.

3

67

Playing back

Viewing photos

Zoom in on part of a photo or view photos in a slide show.

Enlarging a photo

In Playback mode, rotate [Zoom] right to
enlarge a photo. Rotate [Zoom] left to shrink a
photo.

The enlarged area and zoom ratio are indicated on the top of the
screen. The maximum zoom ratio may vary depending on the
resolution.

Enlarged area

Zoom ratio (The maximum zoom
ratio differs depending on the photo
resolution.)

Trim

To Do this

Move the enlarged area

Trim the enlarged photo

Press [ ], [ ], [ ] or [ ].

Press [ ]. The trimmed photo is saved
as a new file.

Playback/Editing

Starting a slide show

You can apply effects and add audio to your slide show.

In Playback mode, press [ ].

1

Select Multi Slide Show.

2

Select a slide show effect option.

3

• Skip to step 5 to start a slide show with no effects.

Option Description

Start

Images

Interval

Music

Effect

Set whether or not to repeat the slide show.
(Play, Repeat)

Select the photos you want to view as a slide show.

• All: View all photos in a slide show.

• Date: View photos captured on a specific date in

a slide show.

• Select: View selected photos in a slide show.

• Set the interval between photos.

• This is available when you select Off in the Effect

option. See below.

Select a background audio.

• Select a transition effect.

• Select Off for no effects.

68

Playing back

Set the slide show effect.

4

Select Start → Play.

5

• To loop the slide show, select Repeat.

• Press [

] to pause or resume the slide show.

To stop the slide show and switch to Playback mode, press [ ], and then
[

] or [ ].

Playing a video

You can play a video, capture an image from a video.

In Playback mode, select a video, and then press [ ].

1

Pause

Use the following buttons to control playback.

2

Press To

[

]

[ ]

[ ]

[Zoom] left or right

Scan backward.

Pause or resume playback.

Scan forward.

Adjust the volume level.

Playback/Editing

69

Playing back

Capturing an image during playback

Press [ ] at the point where you want to save a still

1

image.

Press [ ].

2

A captured image has the same resolution as the original video file and is
saved as a new file.

Playing voice memos

Playing a voice memo

In Playback mode, select a voice memo, and then press

1

[

].

Use the following buttons to control playback.

2

Press To

[

]

[ ]

[ ]

[ ]

[Zoom] left or right

Scan backward.

Pause or resume playback.

Scan forward.

Stop playback.

Adjust the volume level.

Playback/Editing

Adding a voice memo to a photo

In Playback mode, select a photo, and then press

1

[

].

Select File Options → Voice memo → On.

2

Press [Shutter] to record a short voice memo

3

(10 seconds maximum).

• Press [Shutter] to stop recording a voice memo.

You cannot add a voice memo to protected files.

Playing a voice memo added to a photo

In Playback mode, select a photo that includes a voice
memo, and then press [

• Press [ ] to pause or resume playback.

].

70

Editing a photo

Perform photo editing tasks, such as resizing, rotating, eliminating red-eyes, and adjusting brightness, contrast, or saturation.

• The camera saves edited photos as new files.

• When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted

to a lower resolution.

Resizing photos

Change the size of a photo and save it as a new file. You can set
a photo to be displayed when the camera turns on.

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Resize → an option.

2

•

Select to save the photo as a start image. (p. 87)

1984 X 1488

Back

Available options differ depending on the size of the selected photo.

Move

Playback/Editing

Rotating a photo

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Rotate → an option.

2

Right 90˚

Back

The rotated photo will be saved as the same file, not a new file.

71

Move

Editing a photo

Applying smart filter effects

Apply various filter effects to your photos to create unique images.

In Playback mode, select a photo and press [ ].

1

Select Edit → Smart Filter.

2

Select an effect.

3

Miniature

Back Move

Playback/Editing

Option Description

Normal: No effect.

Miniature: Apply a tilt-shift effect to make the subject

appear in miniature.

Vignetting: Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.

Soft Focus: Hide facial imperfections or apply dreamy
effects.

Old Film 1: Apply a vintage film effect 1.

Old Film 2: Apply a vintage film effect 2.

Half Tone Dot: Apply a halftone effect.

Sketch: Apply a pen sketch effect.

Fish-eye: Blacken the edges of the frame and distort

objects to imitate the visual effect of a fisheye lens.

Defog: Make a photo clearer.

Classic: Apply a black and white effect.

Retro: Apply a sepia tone effect.

Negative: Apply a negative film effect.

Custom RGB: Customize a color value.

72

Editing a photo

Defining your own RGB tone

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Smart Filter → Custom RGB.

2

Select a color (R: Red, G: Green, B: Blue).

3

Back Move

Adjust the amount of the selected color.

4

(-: less or +: more)

Playback/Editing

Correcting exposure problems

Adjust ACB (Auto Contrast Balance), brightness, contrast, or
saturation; remove red-eye; hide facial imperfections; or add
noise to the photo.

Adjusting ACB (Auto Contrast Balance)

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Image Adjust → ACB.

2

Removing red-eye

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Image Adjust → Red-eye Fix.

2

73

Editing a photo

Hiding facial imperfections

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Image Adjust → Face Retouch.

2

Select a level.

3

• As the number increases, the face becomes clearer.

Adjusting brightness/contrast/saturation

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Image Adjust.

2

Select an adjustment option.

3

Icon Description

Brightness

Contrast

Saturation

Select a value to adjust the selected item.

4

(-: less or +: more)

Playback/Editing

Adding noise to the photo

In Playback mode, select a photo, and then press

1

[

].

Select Edit → Image Adjust → Add Noise.

2

74

Editing a photo

Creating a print order (DPOF)

Select photos to be printed and set options, such as the number
of copies or paper size.

• You can take the memory card to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a
DPOF-compatible printer at home.

• Wide photos may print with the left and right edges cut off, so be
aware of the dimensions of your photos.

• You cannot set the DPOF for the photos stored in the internal
memory.

In Playback mode, press [ ].

1

Select File Options → DPOF → Standard → an option.

2

Option Description

Select

All

Reset

If you select Select, scroll to a photo, and then rotate

3

[Zoom] left or right to select the number of copies.
Repeat for the photos you want to print, and then press
[

• If you select All, press [ ] or [ ] to select the number of

Print the selected photos.

Print all photos.

Reset to the default settings.

].

copies, and then press [

].

Playback/Editing

Press [ ].

4

Select File Options → DPOF → Size → an option.

5

Option Description

Select

All

Reset

If you select Select, scroll to a photo, and then rotate

6

Specify the print size for the selected photo.

Specify the print size for all photos.

Reset to the default settings.

[Zoom] left or right to select the print size. Repeat for the
photos you want to print, and then press [

• If you select All, press [ ] or [ ] to select the print size,
and then press [

Printing photos as thumbnails

Print photos as thumbnails to check all the photos at once.

In Playback mode, press [ ].

1

Select File Options → DPOF → Index → Yes.

2

If you specify the print size, you can print photos only with DPOF

1.1-compatible printers.

].

].

75

Viewing files on a TV

Play back photos or videos by connecting your camera to a TV using the A/V cable.

In Shooting or Playback mode, press [ ].

1

Select Settings → Video Out.

2

Select a video signal output according to your country

3

or region.

Turn off your camera and TV.

4

Connect your camera to your TV using the A/V cable.

5

Video Audio

Turn on your TV, and then select the video output mode

6

using the TV remote control.

Turn on your camera, and then press [ ].

7

View photos or play videos using the buttons on your

8

camera.

• On some TVs, digital noise may occur or part of an image may not
appear.

• Images may not appear centered on the TV screen depending on
your TV settings.

• You can capture photos or videos while the camera is connected
to a TV.

Playback/Editing

76

Transferring files to your Windows computer

Transfer files by connecting your camera to your Windows PC.

Requirements for Intelli-studio

Item Requirements

CPU

RAM

OS

Hard disk
capacity

Intel Pentium 4, 3.2 GHz or higher/
AMD Athlon™ FX 2.6 GHz or higher

Minimum 512 MB RAM
(1 GB and above recommended)

Windows XP SP2/Vista/7

250 MB or more (1 GB or more recommended)

• CD-ROM drive

• nVIDIA Geforce 7600GT or higher/ATI X1600 series

or higher

Others

• 1024 x 768 pixels, 16-bit color display compatible
monitor (1280 x 1024 pixels, 32-bit color display
recommended)

• USB 2.0 port, Microsoft DirectX 9.0c or later

* The programs may not work properly on 64-bit Edition of Windows XP,

Windows Vista and Windows 7.

Playback/Editing

• The requirements are recommendation only. It may not work properly
even when the computer meets the requirements, depending on the
condition of your computer.

• If your computer does not meet the requirements, videos may not
play correctly or it may take longer to edit videos.

• Install DirectX 9.0c or above before you use the program.

• Your computer must have Windows XP/Vista/7 or Mac OS 10.4 or

later for you to connect the camera to the computer as a removable
disk.

Using a self-assembled PC or a PC and OS that are not supported may void
your warranty.

77

Transferring files to your Windows computer

Installing Intelli-studio

Insert the installation CD in a compatible CD-ROM drive.

1

When the setup screen is appears, click Samsung

2

Digital Camera Installer to start installation.

Select the programs to install, and then follow the

3

onscreen instructions.

Click Exit to complete the installation, and then restart

4

your computer.

Playback/Editing

78

Transferring files to your Windows computer

Transferring files using Intelli-studio

You can easily transfer files on your camera to your computer by
using Intelli-studio.

Turn off the camera.

1

Connect the camera to your computer with the USB

2

cable.

When connecting the USB cable to the camera, be sure to insert the
correct USB cable connector into the camera. If the cable is reversed, it may
damage your files. The manufacturer is not responsible for any loss of data.

The battery charges while the camera is connected to a computer with
the USB cable.

Run Intelli-studio on your computer.

3

Turn on the camera.

4

• The computer recognizes the camera automatically.

If the camera fails to connect, a pop-up window will appear.
Select Computer.

Select a folder on your computer to save new files to.

5

• If your camera has no new files, the pop-up window for saving
new files will not appear.

Select Yes.

6

• New files are transferred to the computer.

Playback/Editing

79

Transferring files to your Windows computer

Using Intelli-studio

The Intelli-studio allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube. For details, select
Help → Help in the program.

• To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support → Update Intelli-studio →
Start Update from the program toolbar.

• You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.

• Intelli-studio supports the following formats:

- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)

- Photos: JPG, GIF, BMP, PNG, TIFF

3 4 5

2 1

15

14

13

12

Playback/Editing

80

6

7

8

9

10

11

Transferring files to your Windows computer

No. Description

1

Open menus

2

Display files in the selected folder

3

Change to the Photo edit mode

4

Change to the Video edit mode

Change to the Sharing mode (You can send files by email

5

or upload files to websites, such as Flickr or YouTube.)

6

Enlarge or reduce the thumbnails in the list

7

Select a file type

8

View files of the selected folder on your computer

9

Show or hide files of the connected camera

10

View files of the selected folder on the camera

11

View files as thumbnails or on a map

12

Browse folders in the connected device

13

Browse folders in your computer

14

Move to the previous or next folder

Print files, view files on a map, store files in My Folder, or

15

register faces

Playback/Editing

Transferring files by connecting the camera as a removable disk

Connect the camera to your computer as a removable disk.

Turn off the camera.

1

Connect the camera to your computer with the USB

2

cable.

When connecting the USB cable to the camera, be sure to insert the
correct USB cable connector into the camera. If the cable is reversed, it may
damage your files. The manufacturer is not responsible for any loss of data.

81

Transferring files to your Windows computer

Turn on the camera.

3

• The computer recognizes the camera automatically.

If the camera fails to connect, a pop-up window will appear.
Select Computer.

On your computer, select My Computer → Removable

4

Disk → DCIM → 100PHOTO.

Select the files you want and drag or save them to your

5

computer.

Disconnecting the camera (for Windows XP)

The way to disconnect the USB cable for Windows Vista/7 is
similar.

If the status lamp on your camera is blinking, wait until

1

it stops.

Click on the tool bar at the bottom right of your PC

2

screen.

Click the pop-up message.

3

Click the message box indicating safely removed.

4

Remove the USB cable.

5

The camera may not be removed safely when Intelli-studio is running.
End the program before disconnecting the camera.

Playback/Editing

82

Transferring files to your Mac computer

When you connect the camera to a Macintosh computer, the computer recognizes the camera automatically.
You can transfer files directly from the camera to the computer without installing any programs.

Mac OS 10.4 or later is supported.

Turn off the camera.

1

Connect your camera to a Macintosh computer with the

2

USB cable.

When connecting the USB cable to the camera, be sure to insert the
correct USB cable connector into the camera. If the cable is reversed, it may
damage your files. The manufacturer is not responsible for any loss of data.

Playback/Editing

Turn on the camera.

3

• The computer recognizes the camera automatically and
displays a removable disk icon.

If the camera fails to connect, a pop-up window will appear.
Select Computer.

Double-click the removable disk icon.

4

Transfer photos or videos to the computer.

5

83

Printing photos with a PictBridge photo printer

Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.

In Shooting or Playback mode, press [ ].

1

Select Settings → USB → Printer.

2

With the printer on, connect your camera to the printer

3

with the USB cable.

Turn on your camera.

4

• The printer recognizes the camera automatically.

Press [ ] or [ ] to select a photo.

5

• Press [ ] to set printing options.
See “Configuring print settings”.

Press [ ] to print.

6

• Printing starts. Press [ ] to cancel printing.

Playback/Editing

Configuring print settings

Images

Size

Layout

Type

Quality

Exit Print

Option Description

Images: Select whether to print the current photo or all
photos.

Size: Specify the size of the print.

Layout: Create thumbnail prints.

Type: Select the type of paper.

Quality: Set the printing quality.

Date: Set to print the date.

File Name: Set to print the name of the file.

Reset: Reset the print options.

Some options are not supported by some printers.

: One Photo

: Auto

: Auto

: Auto

: Auto

84

Settings

Refer to options to configure your camera’s settings.

Camera settings menu

Accessing the settings menu
Sound

……………………………………………… 87

Display

……………………………………………… 87

Settings

……………………………………………… 88

………………………………… 86

……………………… 86

Camera settings menu

Learn about various options to configure your camera's settings.

Accessing the settings menu

In Shooting or Playback mode, press [ ].

1

Select a menu.

2

Volume

Shooting

Sound

Display

Settings

Exit Change

Option Description

Start Sound
Shutter Sound
Beep Sound
AF Sound

Sound: Set various camera sounds and the volume.
(p. 87)

Display: Customize the display settings, such as start
image and brightness. (p. 87)

Settings: Change the settings for the camera system,
such as memory format, default file name, and USB
mode. (p. 88)

Select an option and save your settings.

3

Volume

Start Sound
Shutter Sound
Beep Sound
AF Sound

Back Set

Press [ ] to return to the previous screen.

4

Off
Low
Medium

High

Settings

86

Camera settings menu

Sound

Item Description

Volume

Start Sound

Shutter Sound

Beep Sound

AF Sound

Adjust the volume of any sound.
(Off, Low, Medium*, High)

Select the sound the camera emits when you turn
it on. (Off*, 1, 2, 3)

Select the sound the camera emits when you
press the shutter button. (Off, 1*, 2, 3)

Select the sound the camera emits when you
press buttons or switch modes. (Off, 1*, 2, 3)

Select the sound the camera emits when you
half-press the shutter button. (Off, On*)

* Default

Display

Item Description

Function
Description

Start Image

Display
Brightness

Quick View

Settings

87

* Default

Display a brief description of an option or menu.

Off, On*)

(

Set a start image to display when the camera turns
on.

• Off*: Display no start image.

• Logo: Display a default image stored in the internal

memory.

• User Image: Display the image you want. (p. 71)

• Only one user image will be saved in the

memory.

• If you select a new photo as a user image or
reset your camera, the current image will be
deleted.

Adjust the brightness of the screen.
(Auto, Dark, Normal, Bright*)

Normal is fixed in Playback mode even if you have
selected Auto.

Set the duration for reviewing a captured image before
returning to the Shooting mode.
(Off, 0.5 sec*, 1 sec, 3 sec)

Camera settings menu

Item Description

If you perform no operations for 30 seconds, the
camera automatically switches to Power save mode.

Power Save

(Off*, On)

In Power save mode, press any button other than
[POWER] to resume using the camera.

* Default

Settings

Item Description

Format the internal memory and the memory card.
Format deletes all files, including protected files.
(Yes, No)

Format

Reset

Language

Time Zone Select a region and set the daylight-saving time (DST).

Date/Time
Set

Date Type

Settings

88

If you use a memory card used with cameras from
different manufacturers or a memory card reader, or
one formatted on a computer, your camera may read
the card incorrectly. Format the card before using it.

Reset menus and shooting options. Date and time,
language, and video output settings are not reset.
(Yes, No)

Select a language for the display text.

Set the date and time.

Select a date format.
(

YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, Off*)

* Default

Camera settings menu

Item Description

Specify how to name files.

• Reset: Set the file number to start from 0001
when inserting a new memory card, formatting a
memory card, or deleting all files.

• Series*: Set the file number to follow the previous
file number when inserting a new memory card,
formatting a memory card, or deleting all files.

• The default name of the first folder is 100PHOTO

File No.

• The file number increases one at a time from

• The folder number increases one at a time from

• The maximum number of files that can be stored

• The camera defines file names according to

* Default * Default

and the default name of the first file is
SAM_0001.

SAM_0001 to SAM_9999.

100PHOTO to 999PHOTO.

in one folder is 9999.

the Digital rule for Camera File system (DCF)
standard. If you change the names of files
intentionally, the camera may not play back
the files.

Item Description

Select whether to display the date and time on your
photos when printing. (Off*, Date, Date & Time)

• The date and time is displayed on the bottom-

Imprint

right corner of the photo in yellow.

• Some printer models may not print the date
and time.

• If you select Text in
not display the date and time.

Set the camera to turn off automatically when you are
not using it. (Off, 1 min, 3 min*, 5 min, 10 min)

Auto Power
Off

• Your settings will not change after replacing
the battery.

• The camera will not automatically turn off when:

Set the video signal output according to your region.

• NTSC*: USA, Canada, Japan, Korea, Taiwan,
Mexico.

Video Out

• PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, Finland, Germany,
England, Italy, Kuwait, Malaysia, New Zealand,
Singapore, Spain, Sweden, Switzerland, Thailand,
Norway.

mode, the camera will

- it is connected to a computer or printer

- you are playing a slide show or videos

- you are recording a voice memo

Settings

89

Camera settings menu

Item Description

AF Lamp

USB

Turn on an assistant light to help you focus in dark
places. (Off, On*)

Select the function to use when you connect the
camera to a computer or printer via USB.

• Auto*: Set your camera to select a USB mode
automatically.

• Computer: Connect your camera to a computer
for transferring files.

• Printer: Connect your camera to a printer for
printing files.

* Default

Settings

90

Appendixes

Refer to error messages, specifications, and maintenance tips.

Error messages

Camera maintenance

Cleaning your camera
Using or storing the camera
About memory cards
About the battery

Before contacting a service center

Camera specifications

Glossary

FCC notice

Index

…………………………………………………… 113

………………………………………… 92

…………………………………… 93

……………………………… 93

………………………… 94

……………………………… 95

…………………………………… 97

………………… 101

……………………………… 104

……………………………………………… 108

…………………………………………… 112

Error messages

When the following error messages appear, try these remedies.

Error message Suggested remedies

• Turn off your camera, and then turn it on

Card Error

Card not
supported.

DCF Full Error

File Error

File system not
supported.

Low Battery

Memory Full

No Image File

again.

• Remove your memory card, and insert it
again.

• Format your memory card.

The inserted memory card is not compatible
with your camera. Insert a microSD, microSDHC
memory card.

File names do not match the DCF standard.
Transfer the files on the memory card to your
computer, and then format the card.

Delete the damaged file or contact a Samsung
service center.

Your camera does not support the FAT file
structure of the inserted memory card. Format
the memory card on the camera.

Insert a charged battery or recharge the battery.

Delete unnecessary files or insert a new memory
card.

Take photos or insert a memory card that has
some photos.

Appendixes

92

Camera maintenance

Cleaning your camera

Camera lens and display

Use a blower brush to remove dust, and then wipe the lens
gently with a soft cloth. If any dust remains, apply lens cleaning
liquid to a piece of lens cleaning paper, and then wipe gently.

Appendixes

Camera body

Wipe gently with a soft, dry cloth.

• Never use benzene, thinners, or alcohol to clean the device. These
solutions can damage the camera or cause it to malfunction.

• Do not press on the lens cover or use a blower brush on the lens
cover.

93

Camera maintenance

Using or storing the camera

Inappropriate places to use or store the camera

• Avoid exposing the camera to very cold or very hot temperatures.

• Avoid using your camera in areas with extremly high humidity, or

where the humidity changes drastically.

• Avoid exposing the camera to direct sunlight and storing it in hot,
poorly-ventilated areas, such as in a car during summer time.

• Protect your camera and the display from impact, rough handling,
and excessive vibration to avoid serious damage.

• Avoid using or storing your camera in dusty, dirty, humid, or poorly­ventilated areas to prevent damage to moving parts and internal
components.

• Do not use your camera near fuels, combustibles, or flammable
chemicals. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the camera or its
accessories.

• Do not store the camera where there are mothballs.

Appendixes

Using on beaches or shores

• Protect your camera from sand and dirt when you use it on beaches
or in other similar areas.

• Your camera is not waterproof. Do not handle the battery, adapter, or
memory card with wet hands. Operating the camera with wet hands
may cause damage to your camera.

Storing for extended period of time

• When you store the camera for an extended period, place it in a
sealed container with an absorbent material, such as silica gel.

• Remove the batteries from your camera when storing it for an
extended period. Installed batteries may leak or corrode over time
and cause serious damage to your camera.

• Over time, unused batteries will discharge and must be recharged
before use.

• The present date and time can be initialized when the camera is turned
on after the camera and battery have been separated for over 40 hours.

Use the camera with caution in humid environments

When you transfer the camera from a cold environment to a warm
one, condensation can form on the lens or internal components of
the camera. In this situation, turn off the camera and wait for at least 1
hour. If condensation forms on the memory card, remove the memory
card from the camera and wait until all moisture has evaporated before
reinserting it.

94

Camera maintenance

Other cautions

• Do not swing your camera by the strap. This may cause injury to
yourself or others or damage to your camera.

• Do not paint your camera, as paint can clog moving parts and
prevent proper operation.

• Turn off the camera while not in use.

• Your camera consists of delicate parts. Avoid impacts to the camera.

• Protect the display from external force by keeping it in the case when

not in use. Protect the camera from scratches by keeping it away
from sand, sharp implements, or loose change.

• Do not expose the lens to direct sunlight, as this may discolor the
image sensor or cause it to malfunction.

• Protect your lens from fingerprints and scratches. Clean your lens
with a soft, clean, debris-free lens cloth.

• The camera may turn off if impacted from the outside. This is to
protect the memory card. Turn on the camera to use it again.

• While you use the camera, it may heat up. This is normal and should
not affect your camera’s lifespan or performance.

• When you use the camera in low temperatures, it may take some
time to turn on, the color may be changed temporarily, or after­images may appear. These conditions are not malfunctions and
they will correct themselves when the camera is returned to normal
temperatures.

• Paint or metal on the outside of the camera may cause allergies,
itchy skin, eczema, or swelling for people with sensitive skin. If
you experience any of these symptoms, stop using the camera
immediately and consult a doctor.

Appendixes

• Do not insert foreign objects into any of your camera’s
compartments, slots, or access points. Damage due to improper
use may not be covered by your warranty.

• Do not allow unqualified personnel to service the camera or attempt
to service the camera yourself. Any damage that results from
unqualified service is not covered by your warranty.

About memory cards

Supported memory cards

Your camera supports microSD (Secure Digital) or microSDHC (Secure
Digital High Capacity) memory cards.

To read data with a PC or memory card reader, insert
the memory card into a memory card adapter.

95

Camera maintenance

Memory card capacity

The memory capacity may differ depending on the scenes you
shoot or the shooting conditions. These capacities are based on
a 1 GB microSD card:

Size Super Fine Fine Normal 30 FPS 15 FPS

108 212 312 - -

123 241 353 - -

P

h
o

t
o
s

144 283 417 - -

170 332 482 - -

328 624 882 - -

537 980 1,373 - -

882 1,471 1,931 - -

1,626 2,575 3,090 - -

*
V

i
d
e
o
s

* Available recording time may vary if you use the zoom.

Several videos were recorded in succession to determine the total

recording time.

- - -

- - -

- - -

Approx.

Approx.

Approx.
33’ 44’’

4’ 30’’

9’ 27’’

Approx.

7’ 36’’

Approx.

18’ 16’’

Approx.

61’ 12’’

Appendixes

Cautions when using memory cards

• Insert a memory card in the correct direction. Inserting a memory
card in the wrong direction may damage your camera and memory
card.

• Do not use memory cards that have been formatted by other
cameras or by a computer. Reformat the memory card with your
camera.

• Turn off the camera when you insert or remove the memory card.

• Do not remove the memory card or turn off your camera while the

lamp is blinking, as this may damage your data.

• When the lifespan of a memory card has expired, you cannot store
any more photos on the card. Use a new memory card.

• Do not bend, drop, or subject memory cards with heavy impact or
pressure.

• Avoid using or storing memory cards near strong magnetic fields.

• Avoid using or keeping memory cards in areas with high

temperature, high humidity, or corrosive substances.

• Prevent memory cards from making contact with liquids, dirt, or
foreign substances. If dirty, wipe the memory card clean with a soft
cloth before you insert the memory card in your camera.

• Do not allow liquids, dirt, or foreign substances to come in contact
with memory cards or the memory card slot. Doing so may cause
memory cards or the camera to malfunction.

• When you carry a memory card, use a case to protect the card from
electrostatic discharges.

96

Camera maintenance

• Transfer important data to other media, such as a hard disk, CD,
or DVD.

• When you use the camera for an extended period, the memory
card may become warm. This is normal and does not indicate a
malfunction.

The manufacturer is not responsible for any loss of data.

About the battery

Use only Samsung-approved batteries.

Battery specifications

Specification Description

Model

Type

Cell capacity

Voltage

Charging time*
(when the camera is switched off)

*

Charging the battery by connecting it to a computer may take longer.

BP70A

Lithium-ion battery

740 mAh (Minimum 700 mAh)

3.7 V

Approximately 150 min

Appendixes

Battery life

Average shooting time /
Number of photos

Shooting conditions
(when the battery was fully charged)

The battery life was measured under the
following conditions: in the

mode,
in the darkness, 16M resolution, Fine
quality and OIS on.

Test Procedure:

Photos

Approximately
100 min /
Approximately
200

1. Set the flash option to Off, take a

single shot, and zoom in or out.

2. Set the flash option to Fill in, take a

single shot, and zoom in or out.

3. Perform steps 1 and 2 for 30

seconds and repeat for 5 minutes.
Then turn off the camera for
1 minute.

4. Repeat steps 1 to 3.

Approximately

Videos

80 min

• The figures above are based on Samsung’s standards. Your results may differ
depending on your actual usage.

• Several videos were recorded in succession to determine the total recording
time.

Record videos at 1280 X 720 HQ
resolution and 30 FPS.

97

Camera maintenance

Low battery message

When the battery charge has fully discharged, the battery icon will
red and the ‘Low Battery’ message will appear. Insert a charged
battery or recharge the battery.

turn

Notes about using the battery

• Avoid exposing batteries or memory cards to very cold or very hot
temperatures (below 0º C/32º F or above 40º C/104º F). Extreme
temperatures can reduce the charging capacity of your batteries and
can cause memory cards to malfunction.

• When you use the camera for an extended period, the area around
the battery chamber may become warm. This does not affect the
normal use of the camera.

• Do not pull the power supply cord to disconnect the plug from the
power outlet, as this may cause a fire or electric shock.

• In temperatures below 0 º C, battery capacity and battery life
may decrease.

• Battery capacity may decrease in low temperatures but will
return to normal in milder temperatures.

Appendixes

Cautions about using the battery

Protect batteries, chargers, and memory cards from
damage

Prevent batteries from making contact with metal objects, as this can
create a connection between the + and – terminals of your battery and
lead to temporary or permanent battery damage and may cause a fire
or electric shock.

Notes about charging the battery

•If the camera is on while charging, the battery may not fully
charge. Turn off the camera before charging the battery.

•Do not use your camera when you charge the battery. This may
cause a fire or electric shock.

•Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a fire or electric shock.

•Wait to turn on the camera until after the battery has charged for
at least 10 minutes.

•If you connect the camera to an external power source while
the battery is depleted, using some high energy-consuming
functions will cause the camera to turn off. To use the camera
normally, recharge the battery.

•Using the flash or recording videos depletes the battery quickly.
Prior to use, fully charge the camera until the status lamp turns
off.

98

Camera maintenance

•If the indicator light does not illuminate, reconnect the cable, or
remove the battery and insert it again.

•Overcharging batteries may shorten battery life. After charging is
finished, disconnect the cable from your camera.

•Do not bend or place heavy objects on the AC cable. Doing so
may damage the cable.

Notes about charging with a computer connected

•Use only the provided USB cable.

•The battery may not charge when:

- you use a USB hub

- other USB devices are connected to your computer

- you connect the cable to the port on the front side of your
computer

- the USB port of your computer does not support the power output
standard (5V, 500mA)

Appendixes

Handle and dispose of batteries and chargers with care

•Never dispose of batteries in a fire. Follow all local regulations
when you dispose of used batteries.

•Never place batteries or cameras on or in heating devices,
such as microwave ovens, stoves, or radiators. Batteries may
explode when they are overheated.

99