Samsung ST30 User Manual

This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Click a topic
Basic troubleshooting
Quick reference
User Manual
ST30
Contents
Basic functions
Extended functions
Playback/Editing
Settings
Appendixes
Index

Health and safety information

Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Warning—situations that could cause injury to yourself or others
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera.
Do not use your camera near flammable or explosive gases and liquids.
This may cause a fire or explosion.
Do not insert flammable materials into the camera or store these materials near the camera.
This may cause a fire or electric shock.
Do not handle your camera with wet hands.
This may result in electric shock.
Prevent damage to subjects’ eyesight.
Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the flash too close to your subject’s eyes, this can cause temporary or permanent eyesight damage.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well.
Do not expose the camera to direct sunlight or high temperatures for an extended period of time.
Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components.
Avoid covering the camera or charger with blankets or clothes.
The camera may over-heat, which may distort the camera or cause a fire.
If liquid or foreign objects enter your camera, immediately disconnect all power sources such, as the battery or charger, and then contact a Samsung service center.
1
Health and safety information
Caution—situations that could cause damage to your camera or other equipment
Remove the batteries from your camera when storing it for an extended period of time.
Installed batteries may leak or corrode over time and cause serious damage to your camera.
Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries. Do not damage or heat the battery.
This may cause a fire or personal injuries.
Use only Samsung-approved batteries, chargers, cables and accessories.
•Unauthorized batteries, chargers, cables or accessories can cause batteries to explode, damage your camera, or cause injury.
•Samsung is not responsible for damages or injuries caused by unapproved batteries, chargers, cables or accessories.
Do not use batteries for unintended purposes.
This may cause a fire or electric shock.
Do not touch the flash while it fires.
The flash is very hot when fired and may burn your skin.
When you use AC charger, turn off the camera before you disconnect the power to the AC charger.
Failing to do so may result in fire or electric shock.
Disconnect chargers from power sources when not in use.
Failing to do so may result in fire or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries.
This may cause a fire or electric shock.
Do not allow the AC charger to come in contact with the +/- terminals on the battery.
This may cause a fire or electric shock.
2
Health and safety information
Do not force the camera’s parts or apply pressure to the camera.
This may cause your camera to malfunction.
Exercise caution when you connect cables or adapters and install batteries and memory cards.
If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card.
This may result in electric shock or camera malfunction or cause a fire.
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of files or damages that may result from camera malfunction or improper use.
You must plug the end of the cable with the indicator light () into your camera.
If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.
3
Organization of the user manual
Copyright information
• Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation.
• micro SD™, micro SDHC™ are registered trademarks of the SD Association.
• Mac is a registered trademark of the Apple Corporation.
• Trademarks and trade names used in this manual are the property of
their respective owners.
• Camera specifications or contents of this manual may be changed without prior notice due to upgrade of camera functions.
• You are not allowed to reuse or distribute any part of this manual without prior permission.
• For Open Source License information, refer to the “OpenSourceInfo.pdf” in the provided CD-ROM.
Basic functions 11
Learn about your camera’s layout, icons, and basic functions for shooting.
Extended functions 26
Learn how to take a photo by selecting a mode and how to record a video or voice memo.
Shooting options 35
Learn about the options you can set in shooting mode.
Playback/Editing 51
Learn how to play back photos, videos, and edit photos or videos. You will also learn how to connect your camera to your photo printer or TV.
Settings 72
Refer to options to configure your camera’s settings.
Appendixes 77
Refer to error messages, specifications, and maintenance tips.
4
Indications used in this manual
Shooting mode Indication
Smart Auto
Program
DIS
Scene
Movie
Shooting mode icons
These icons indicate that a function is available in the corresponding modes. The for all scenes.
e.g.)
mode may not support functions
Available in the Program, DIS, and Movie modes
Icons used in this manual
Icon Function
Additional information
Safety warnings and precautions
Camera buttons; for example: [Shutter] represents the
[ ]
shutter button.
( )
Page number of related information
The order of options or menus you must select to perform a step. For example: Select Shooting White
Balance represents select Shooting, and then select White Balance.
*
Annotation
Abbreviations used in this manual
Abbreviation Definition
ACB
AEB
AF
DIS
DPOF
EV
ISO
WB
Auto Contrast Balance
Auto Exposure Bracket
Auto Focus
Digital Image Stabilization
Digital Print Order Format
Exposure Value
International Organization for Standardization
White Balance
5
Expressions used in this manual
Pressing the shutter
•Half-press [Shutter]: Press the shutter halfway down.
•Press [Shutter]: Press the shutter all the way down.
Half-press [Shutter] Press [Shutter]
Subject, background, and composition
•Subject: The main object of a scene, such as a person, animal, or still life.
•Background: The objects around the subject.
•Composition: The combination of a subject and background.
Background
Composition
Subject
Exposure (Brightness)
The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO speed. By altering the exposure, your photos will be darker or lighter.
Normal exposure Overexposure (too bright)
6

Basic troubleshooting

You can get answers to common questions. Solve problems easily by setting shooting options.
The subject's eyes appear red.
Photos have dust spots.
Photos are blurred.
Photos are blurred when shooting at night.
Subjects come out too dark because of backlighting.
This is caused by a reflection from the camera flash.
• Set the flash option to
• If the photo has already been taken, select
Dust particles floating in the air may be captured in photos when using the flash.
• Turn off the flash or avoid taking photos in a dusty place.
• Set ISO speed options. (p. 39)
This may be caused by taking photos in low light conditions or holding the camera incorrectly.
• Press [Shutter] halfway down to make sure the subject is focused. (p. 24)
• Use the
As the camera tries to let in more light, the shutter speed slows. This can make it difficult to steady the camera and may result in camera shake.
• Turn on the flash. (p. 38)
• Set ISO speed options. (p. 39)
• Use a tripod to prevent your camera from shaking.
• Select
When the light source is behind the subject or when there is a high contrast between the light and dark areas, the subject may come out shaded.
• Avoid shooting with the sun behind your subject.
• Select
• Set the flash option to
• Set the Auto Contrast Balance (ACB) option. (p. 45)
• Adjust the exposure. (p. 45)
• Set the metering option to
mode. (p. 31)
Night in the mode. (p. 30)
Backlight in the mode. (p. 28)
Red-eye or Red-eye Fix. (p. 38)
Fill in. (p. 38)
Spot if a bright subject is in the center of the frame. (p. 46)
7
Red-eye Fix in the edit menu. (p. 61)

Quick reference

Taking photos of people
• mode > Beauty Shot  29
mode > Portrait  28
•
• Red-eye, Red-eye Fix (to prevent or correct red-eye)
38
• Face Detection
42
Taking photos at night or in the dark
• mode > Night  30
mode > Sunset, Dawn, Fireworks  28
•
• Flash options
• ISO speed (to adjust the sensitivity to light)
38
39
Taking action photos
• Continuous, Motion Capture  48
Taking photos of text, insects, or flowers
• mode > Close Up, Text  28
• Macro, Auto Macro (to take close-up photos)
• White Balance (to change the color tone)
40
46
Adjusting the exposure (brightness)
• EV (to adjust exposure)  45
• ACB (to compensate for subjects against bright
backgrounds)
• Metering
• AEB (to take three photos of the same scene with
different exposures)
45
46
48
Applying a different effect
• Photo styles (to apply tones)  49
• Image adjustment (to adjust saturation, sharpness, or
contrast)
50
Reducing camera shake
• mode  31
8
• Viewing files by category in Smart Album
• Deleting all files on the memory card
• Viewing files as a slide show
• Viewing files on a TV
• Connecting your camera to a
computer
• Adjusting the brightness of the display
• Changing the display language
• Setting the date and time
• Formatting the memory
card
• Troubleshooting
53
55
56
75
75
64
74
63
75
87

Contents

Basic functions
Unpacking ................................................................... 12
Camera layout ............................................................. 13
Inserting the battery and memory card ....................... 15
Charging the battery and turning your camera on ...... 16
Charging the battery ................................................... 16
Turning on your camera .............................................. 16
Performing the initial setup ......................................... 17
Learning icons ............................................................. 18
Selecting options ......................................................... 19
Setting the display and sound .................................... 21
Changing the display type ........................................... 21
Setting the sound ....................................................... 21
Taking photos .............................................................. 22
Zooming .................................................................... 23
Tips for getting a clearer photo ................................... 24
Extended functions
Shooting modes .......................................................... 27
Using the Smart Auto mode ........................................ 27
Using the Scene mode ............................................... 28
Using the Beauty Shot mode ....................................... 29
Using the frame guide ................................................. 30
Using the Night mode ................................................. 30
Using the DIS mode ................................................... 31
Using the Program mode ............................................ 32
Recording a video ..................................................... 32
Recording voice memos ............................................. 34
............................................................... 11
........................................................ 26
9
Recording a voice memo ............................................ 34
Adding a voice memo to a photo ................................. 34
Shooting options
Selecting a resolution and quality ............................... 36
Selecting a resolution .................................................. 36
Selecting image quality ............................................... 36
Using the timer ............................................................ 37
Shooting in the dark .................................................... 38
Preventing red-eye ..................................................... 38
Using the flash ........................................................... 38
Adjusting the ISO speed ............................................. 39
Changing the camera’s focus ..................................... 40
Using macro .............................................................. 40
Using auto focus ........................................................ 40
Adjusting the focus area .............................................. 41
Using face detection ................................................... 42
Detecting faces .......................................................... 42
Taking a self-portrait shot ............................................. 43
Taking a smile shot ..................................................... 43
Detecting eye blinking ................................................. 44
Adjusting brightness and color ................................... 45
Adjusting the exposure manually (EV) ........................... 45
Compensating for backlighting (ACB) ........................... 45
Changing the metering option ...................................... 46
Selecting a light source (White balance) ....................... 46
Using burst modes ...................................................... 48
Improving your photos ................................................ 49
............................................................ 35
Contents
Applying photo styles .................................................. 49
Adjusting your photos ................................................. 50
Playback/Editing
............................................................. 51
Playing back ................................................................ 52
Starting Playback mode .............................................. 52
Viewing photos .......................................................... 55
Playing a video ........................................................... 57
Editing a photo ............................................................ 59
Resizing photos ......................................................... 59
Rotating a photo ......................................................... 59
Applying photo styles .................................................. 60
Correcting exposure problems .................................... 61
Creating a print order (DPOF) ....................................... 62
Viewing files on a TV ................................................... 63
Transferring files to your Windows computer ............. 64
Transferring files using Intelli-studio ............................... 66
Transferring files by connecting the camera as a removable disk
Disconnecting the camera (for Windows XP) ................. 69
Transferring files to your Mac computer ..................... 70
Printing photos with a PictBridge photo printer ......... 71
Settings
........................................................................... 72
Camera settings menu ................................................ 73
Accessing the settings menu ...................................... 73
Display ...................................................................... 74
Settings ..................................................................... 75
.. 68
10
Appendixes
..................................................................... 77
Error messages ........................................................... 78
Camera maintenance .................................................. 79
Cleaning your camera ................................................. 79
Using or storing the camera ........................................ 80
About memory cards .................................................. 81
About the battery ........................................................ 83
Before contacting a service center ............................. 87
Camera specifications ................................................. 90
Glossary ....................................................................... 94
FCC notice ................................................................... 98
Index ............................................................................ 99

Basic functions

Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking
Camera layout
Inserting the battery and memory card
Charging the battery and turning your camera on
Performing the initial setup
Learning icons
Selecting options
Setting the display and sound
Taking photos
Tips for getting a clearer photo
……………………………………………… 12
…………………………………………… 13
……………… 15
Charging the battery Turning on your camera
Changing the display type Setting the sound
Zooming
…………………………………………… 23
………………………………… 16
…………………………… 16
…………………………… 17
…………………………………………… 18
………………………………………… 19
………………………… 21
…………………………… 21
…………………………………… 21
…………………………………………… 22
………………………… 24
…… 16

Unpacking

Check your product box for the following items.
Optional accessories
Camera AC adapter/USB cable Rechargeable battery
Strap User Manual CD-ROM Quick Start Manual
The illustrations may differ from your actual items.
Basic functions
Camera case Memory card/
Memory card adapter
A/V cable Battery charger
12

Camera layout

Before you start, familiarize yourself with your camera's parts and their functions.
POWER button
Shutter button
Flash
Attaching the strap
Buzzer
Timer lamp
Microphone
Lens
Tripod mount
Battery chamber cover
Insert a memory card and battery
Basic functions
13
Camera layout
Status lamp
• Blinking: When the camera is saving a photo or video, being read by a computer or printer, or out of focus
• Steady: When the camera is connecting to a computer or in focus
Display
Mode button: Open the list of shooting modes
Icon Mode Description
Smart Auto
Program
DIS
Scene
Movie
The camera automatically selects settings based on a the type of scene (Night, Portrait, Sunset, etc.) it detects.
Take a photo by setting options
The camera activates options that reduce camera shake.
Take a photo with options preset for a specific scene (Landscape, Portrait, etc.).
Record a video.
Zoom button
• Zoom in or out in Shooting mode.
• Zoom in on part of a photo or view files as
thumbnails in Playback mode.
Refer to the table at the bottom
Button Description
Access options or menus
In Shooting mode While setting
Change the display option Move up
Navigation
Playback
Function
Change the macro option Move down
Change the flash option Move left
Change the timer option Move right
Confirm the highlighted option or menu
Enter Playback mode
• Access options in Shooting mode
• Delete files in Playback mode
USB and A/V port
Accepts USB cable or A/V cable
Basic functions
14

Inserting the battery and memory card

Learn to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Memory card
Push the card gently until the card disengages from the camera, and then pull it out of the slot.
Insert a memory card with
the gold-colored contacts
facing up.
Insert the battery with the
Samsung logo facing down.
Basic functions
Battery lock
Push the lock up to release the battery.
Battery
• You need a storage device for shooting. Insert the memory card.
• Insert a memory card in the correct direction. Inserting a memory
card in the wrong direction may damage your camera and memory card.
15

Charging the battery and turning your camera on

Charging the battery

Before using the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter, and then plug the end of cable with the indicator light into your camera.
Indicator light
•Red: Charging
•Orange: Error
•Green: Fully charged
Basic functions

Turning on your camera

Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera for the first time. (p. 17)
Turning on your camera in Playback mode
Press [ ]. The camera turns on and accesses Playback mode immediately.
When you turn on your camera by pressing and holding [ ] for about 5 seconds, the camera does not emit the beep sound.
16

Performing the initial setup

The initial setup screen appears to allow you to configure the camera's basic settings.
Press [ ].
1
• The initial setup screen appears when you turn on the camera for the first time.
Press [ ] or [ ] to select Language and press [ ]
2
or [
].
Press [ ] or [ ] to select a language and press [ ].
3
Press [ ] or [ ] to scroll to Time Zone and press
4
[
] or [ ].
Press [ ] or [ ] to select a time zone and press [ ].
5
• To set the daylight-saving time, press [ ].
Basic functions
Press [ ] or [ ] to select Date/Time Set and press
6
[
] or [ ].
Press [ ] or [ ] to select an item.
7
Press [ ] or [ ] to set the date and time and press [ ].
8
Press [ ] or [ ] to select Date Type and press
9
[
] or [ ].
Press [ ] or [ ] to select a date format and press [ ].
10
Press [ ] to switch to the Shooting mode.
11
17

Learning icons

The icons displayed will change according to the mode you select or the options you set.
A. Information
Icon Description
Selected shooting mode
Available number of photos
Available recording time
Memory card is not inserted
Memory card inserted
• : Fully charged
•
: Partially charged
•
: Charging needed
Voice memo (On)
A
Icon Description
B
B. Icons on the right
C
Icon Description
Auto focus frame
Camera shake
Zoom ratio
Current date and time
Photo resolution
Video resolution
Frame rate
Photo quality
Metering option
Flash option
Timer option
Auto focus option
Face detection
Basic functions
18
C. Icons on the left
Icon Description
Aperture and shutter speed
Long time shutter
Exposure value
White balance
Face tone
Face retouch
ISO speed
Video Stabilizer
Photo style
Image adjustment (contrast, sharpness, saturation)
Voice recording available when shooting video
Burst type

Selecting options

You can select options by pressing [ ], and then using the navigation buttons ([ ], [ ], [ ], [ ]).
You can also access shooting options by pressing [ ], but some options are not available.
In Shooting mode, press [ ].
1
Use the navigation buttons to scroll to an option or
2
menu.
• To move up or down, press [ ] or [ ].
• To move left or right, press [
Press [ ] to confirm the highlighted option or menu.
3
] or [ ].
Basic functions
Going back to the previous menu
Press [ ] again to go back to the previous menu.
Half-press [Shutter] to return to the Shooting mode.
19
Selecting options
Example: Selecting a White Balance option in the P mode
In Shooting mode, press [ ].
1
Press [ ] or [ ] to scroll to Program, and then
2
press [
This mode allows you to directly set various features for shooting.
Press [ ].
3
Press [ ] or [ ] to scroll to Shooting, and then
4
press [
Smart Auto
Program
DIS
Scene
Movie
Shooting
Display
Settings
Exit
] or [ ].
].
Photo Size
Quality
EV
ISO
White Balance
Face Detection
Focus Area
Change
Basic functions
Press [ ] or [ ] to scroll to White Balance, and then
5
press [
] or [ ].
Photo Size Quality EV ISO White Balance Face Detection Focus Area
Exit Back
Press [ ] or [ ] to scroll to a White Balance option.
6
Daylight
Back Move
Press [ ].
7
20

Setting the display and sound

Learn how to change the basic display and sound settings.

Changing the display type

Select a display type for Shooting or Playback mode. Each type displays different shooting or playback information.
Press [ ] repeatedly to change a display type.
Show all photographic
information.
Modes Display Type Choices
• Display all information about shooting
Shooting
Playback
• Hide information about shooting, except the available number of photos (or available recording time) and the battery icon
• Display all information about the current photo
• Hide all information about the current file
• Display information about the current file, except the
shooting settings and captured date
Basic functions

Setting the sound

Set whether your camera emits a specified sound when you operate your camera.
In Shooting or Playback mode, press [ ].
1
Select Settings Beep Sound an option.
2
Options Description
Off
On
21
The camera does not emit any sounds.
The camera emits a sound during operation.

Taking photos

Learn basic actions to take photos easily and quickly in the Smart Auto mode.
In Shooting mode, press [ ].
1
Press [ ] or [ ] to scroll to Smart Auto, and then
2
press [
This mode recognizes the scene automatically.
Align your subject in the frame.
3
].
Smart Auto
Program
DIS
Scene
Movie
Basic functions
Half-press [Shutter] to focus.
4
• A green frame means the subject in focus.
• A red frame means the subject is out of focus.
Press [Shutter] to take a photo.
5
See page 24 for tips to get clearer photos.
22
Taking photos

Zooming

You can shoot close-up photos by adjusting the zoom. Your camera has a 3X optical zoom and 3X digital zoom. By using both, you can zoom in up to 9 times.
Press [Zoom] right to zoom in on your subject. Press [Zoom] left to zoom out.
Zoom ratio
Zoom inZoom out
Basic functions
Digital zoom
If the zoom indicator is in the digital range, your camera is using the digital zoom. The picture quality may deteriorate when you use the digital zoom.
Optical range
• The Digital zoom is not available with the Face Detection options.
• It may take longer to save a photo when you are using the digital
zoom.
Zoom indicator
Digital range
23

Tips for getting a clearer photo

Holding your camera correctly
Half-pressing the shutter button
Half-press [Shutter] and adjust the focus. The camera adjusts the focus and exposure automatically.
The camera sets the aperture value and shutter speed automatically.
Focus frame
• Press [Shutter] to take the photo if the focus frame appears in green.
• Change the composition and half­press [Shutter] again if the focus frame appears in red.
Make sure nothing is blocking the lens.
Basic functions
Reducing camera shake
Select the mode to reduce camera shake digitally. (p. 31)
When is displayed
Camera shake
When shooting in the dark, avoid setting the flash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera still.
• Use a tripod or set the flash option to Fill in. (p. 38)
• Set ISO speed options. (p. 39)
24
Preventing your subject from being out of focus
It may be difficult to get your subject in focus when:
there is little contrast between the subject and background
-
(for example, when your subject is wearing clothing that is similar in color to the background)
- the light source behind the subject is too bright
- the subject is shiny or reflective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame
Use the focus lock
Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to take your photo.
• When you take photos in low light
Turn on the flash. (p. 38)
• When subjects are moving fast
Use the continuous or motion capture function. (p. 48)
Basic functions
25

Extended functions

Learn how to take a photo by selecting a mode and how to record a video or voice memo.
Shooting modes
Using the Smart Auto mode Using the Scene mode Using the Beauty Shot mode Using the frame guide Using the Night mode Using the DIS mode Using the Program mode Recording a video
Recording voice memos
Recording a voice memo Adding a voice memo to a photo
………………………………………… 27
……………………………… 28
……………………………… 30 ……………………………… 30
………………………………… 31
………………………………… 32
……………………………… 34
………………………… 27
……………………… 29
…………………………… 32
…………………………… 34
…………………… 34

Shooting modes

Take photos or record videos by selecting the best shooting mode for the conditions.

Using the Smart Auto mode

In this mode, your camera automatically chooses the appropriate camera settings based on the type of scene it defects. Smart Auto Mode is helpful if you are not familiar with the camera settings for various scenes.
In Shooting mode, press [ ].
1
Select Smart Auto.
2
Align your subject in the frame.
3
• The camera selects a scene automatically. An appropriate scene mode icon appears at the top left of the screen. The icons are listed below.
Icon Description
Appears when taking photos of landscapes.
Appears when taking photos with bright white backgrounds.
Extended functions
Icon Description
Appears when taking photos of landscapes at night. This is available only when the flash is off.
Appears when taking portraits at night.
Appears when taking photos of landscapes with backlighting.
Appears when taking portraits with backlighting.
Appears when taking portraits.
Appears when taking close-up photos of objects.
Appears when taking close-up photos of text.
Appears when taking photos of sunsets.
Appears when taking photos of clear skies.
Appears when taking photos of forested areas.
Appears when taking close-up photos of colorful subjects.
Appears when the camera is stable (on a tripod, for example) and the subject is motionless for a period of time. This is available only when you are shooting in the dark.
Appears when taking photos of actively moving subjects.
27
Shooting modes
Half-press [Shutter] to focus.
4
Press [Shutter] to take the photo.
5
• If the camera does not recognize a proper scene mode, appears and the camera uses default settings.
• Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting.
• The camera may not select the correct scene depending on the shooting condtions, such as camera shake, lighting, and distance to the subject.
• Even if you use a tripod, the camera may not detect the depending on the subject's movement.
• In
mode, the camera consumes more battery power, because
it changes settings often to select appropriate scenes.
mode

Using the Scene mode

Take a photo with options preset for a specific scene.
In Shooting mode, press [ ].
1
Select Scene a scene.
2
Beauty Shot
Frame Guide
Night
Portrait
Children
Landscape
Close Up
This mode is appropriate for taking pictures of faces.
• To change the scene mode, press [ ], and then select
Scene a scene.
• For the Beauty Shot mode, see “Using the Beauty Shot mode" on page 29.
• For the Frame Guide mode, see “Using the frame guide" on page 30.
• For the Night mode, see “Using the Night mode” on page 30.
Align your subject in the frame, and then half-press
3
[Shutter] to focus.
Press [Shutter] to take the photo.
4
Extended functions
28
Shooting modes

Using the Beauty Shot mode

Take a photo of a person with options to hide facial imperfections.
In Shooting mode, press [ ].
1
Select Scene Beauty Shot.
2
To make the subject's skin tone appear lighter (face
3
only), press [ facial imperfections, press [
5.
Select Shooting Face Tone an option.
4
• Select a higher setting to make skin tone appear lighter.
Level 2
Back Move
To hide facial imperfections, press [ ].
5
], and then go to Step 4. To hide
], and then go to Step
Select Shooting Face Retouch an option.
6
• Select a higher setting to hide a greater number of imperfections.
Level 2
Back Move
Align your subject in the frame, and then half-press
7
[Shutter] to focus.
Press [Shutter] to take the photo.
8
The focus distance will be set to Auto Macro.
Extended functions
29
Loading...
+ 73 hidden pages