Samsung SRD-850, SRD-1630 User Manual

SRD-830/830D/1610/1610D/1630/1630D

SRD-850/850D/1650/1650D SRD-870/870D/1670/1670D

8 Channel/16 Channel DVR

User Manual

imagine the possibilities

Thanks you for purchasing this Samsung product. To receive a more complete service, please visit our website

www.samsungsecurity.com

overview

FEATURES

The SRD DVR (Digital Video Recorder) employs H.264 video encoding for 8 or 16 channel inputs and G.723 audio encoding for 4 or 16 channels while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data.

Provides convenient User Interface

8/16 CH Composite Input Connectors

Supports CIF(S)/2CIF(M)/4CIF(L) recording formats

With the network speciﬁc codec, network transfer enabled regardless of the recording conditions

De-interlacing processor for better picture quality

HDMI enabling superior picture output quality

Display of HDD information and status by using HDD SMART

4CIF Size (NTSC: 704*480, PAL: 704*576) Recording in 480 (NTSC)/400 (PAL) IPS speed (SRD-870/870D/1670/

1670D)

CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 480 (NTSC)/400 (PAL) IPS speed (SRD-850/850D/

1650/1650D)

CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 240 (NTSC)/200 (PAL) IPS speed (SRD-1630/1630D)

CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 120 (NTSC)/100 (PAL) IPS speed

(SRD-830/830D/1610/1610D)

8/16-channel Loop Through Video port connection

Hard Disk overwrite function

Mass storage hard disk backup through high-speed USB 2.0

Mass storage hard disk backup through eSATA (SRD-850/850D/870/870D/1650/1650D/1670/1670D)

Backup function using USB 2.0 ﬂash memory and external CD/DVD writer

(Internal DVD writer is not available for SRD-830/850/870/1610/1630/1650/1670)

Simultaneous Record and Playback of 8/16-channel video data

Various Search Modes (Search by Time, Event, Backup, POS and Motion Detection)

Various Recording Modes (Time Lapse, Event, Scheduled Recording)

Extended Hard Disk Connection (USB 2.0, eSATA) (SRD-850/850D/870/870D/1650/1650D/1670/1670D)

Alarm Interface (Input: 8/16, Output: 4, Reset: 1)

Remote Monitoring function by Windows Network Viewer

2_ overview

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

Read these instructions.

1) Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install in accordance with the manufacturer’s

7) instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other

8) apparatus (including ampliﬁers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has

9) two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience

10) receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories speciﬁed by the manufacturer.

11)

Use only with the cart, stand, tripod, bracket, or table speciﬁed by the

12) manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lightning storms or when unused for long

13) periods of time.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has

14) been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

! OVERVIEW

English _3

overview

BEFORE START

This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices :

SAMSUNG retains the copyright on this manual.

This manual cannot be copied without SAMSUNG’s prior written approval.

We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.

Prior to opening the case, please consult a qualiﬁed technician ﬁrst. Whenever this is needed power must be removed from the unit.

Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this DVR, check the compatibility. Consult your provider for the compatibility list.

Warning

❖

Battery

It is essential that when changing the battery in the unit, the replacement battery must be of the same type otherwise there may be a possibility of an explosion. The following are the speciﬁcations of the battery you are using now.

Normal voltage : 3V

Normal capacity : 170mAh

Continuous standard load : 0.2mA Operating temperature : -20°C ~ +85°C

(-4°F ~ +185°F)

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA.

“Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

❖

Turning off the power while the product is in operation, or undertaking improper actions may cause damage or malfunction to the hard drive or the product. Please turn off the power using the Power button on the front of your DVR. After selecting <OK> in the pop-up menu, you can pull off the power cord. You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)

❖

The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F). This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one. Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand at room temperature for a period. Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F). Likewise, the hard drive may not work at a temperature below the guaranteed one.

❖

This equipment is in door use and all the communication wirings are limited to inside of the building.

Connect the power cord into a grounded outlet.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

Batteries shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

System Shutdown

Operating Temperature

Ethernet Port

4_ overview

Standards Approvals

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15

Package Contents

Please unwrap the product, and place the product on a ﬂat place or in the place to be installed. Please check the following contents are included in addition to the main unit.

Remote Control Mouse Power Cable

! OVERVIEW

Network Viewer Software /

User Manual CD

SATA Cable

(SRD-830D/850D/870D/1610D/

1630D/1650D/1670D : 4EA)

(SRD-830/850/870/1610/1630/

1650/1670 : 5EA)

Bracket Fixing Screw(4EA) Bracket Rack

For models that are not equipped with the HDD, one SATA cable is provided for HDD installation.

Audio Extension Cable (optional)

(SRD-850/850D/870/870D/

1650/1650D/1670/1670D)

User Manual Remote Control Battery (AAA)

HDD Fixing Screw

(SRD-830D/850D/870D/1610D/1630D/

1650D/1670D : 16EA)

(SRD-830/850/870/1610/1630/1650/

1670 : 20EA)

English _5

overview

CONTENTS

OVERVIEW

INSTALLATION

CONNECTING WITH OTHER DEVICE

LIVE

2 Features 3 Important Safety Instructions 4 Before Start 8 Part Names and Functions (Front) 10 Part Names and Functions (Rear) 13 Remote Control

15 Checking the installation environment 16 Rack Installation 16 HDD Addition

20 Connecting the Video, Audio, and Monitor 20 Connecting the USB 21 Connecting External SATA HDD 21 Connecting POS Device 21 Connecting the Alarm Input/Output 22 Connecting the RS-485 Device 23 Connecting the Network

25 Getting Started 27 Live Screen Configuration 31 Live Mode 33 Spot Out 34 Zoom 34 Audio ON/OFF 34 Freeze 35 Event Monitoring

6_ overview

USING THE DVR

36 System Setup 46 Setting the Device 54 Setting the Recording 57 Setting the Event 60 Backup 61 Network Configuration 68 Controlling a PTZ device

SEARCH & PLAY

70 Search 73 Playback

WEB VIEWER

BACKUP VIEWER

APPENDIX

100

74 Introducing Web Viewer 75 Connecting Web Viewer 77 Using Live Viewer 83 Using Search Viewer 87 Viewer Setup 97 About

98 SEC Backup Viewer

100 Product Specification (SRD-830/830D/1610/

1610D/1630/1630D)

103 Product Specification (SRD-850/850D/870/

870D/1650/1650D/1670/1670D)

106 Product Overview 107 Default Setting 110 Troubleshooting

! OVERVIEW

English _7

overview

1 2 3 4

5 6 7 8

9 0

ALARM HDD NETWORK BACKUP REC

REC

ZOOM

MODE

FREEZE

AUDIO

BACKUP

ALRAM

TELE WIDE VIEW PRESET

RETURN

SHR-6080/7080/8080

USB

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

ALARM HDD NETWORK BACKUP REC

REC

ZOOM

MODE

FREEZE

AUDIO

BACKUP

ALRAM

TELE WIDE VIEW PRESET

RETURN

SHR-6160/6163/7160/8160

USB

SHR-6082/7082/8082

1 2 3 4

5 6 7 8

9 0

ALARM HDD NETWORK BACKUP REC

DVD RECORDER

REC

ZOOM

MODE

FREEZE

AUDIO

BACKUP

ALRAM

TELE WIDE VIEW PRESET

RETURN

USB

OPEN/CLOSE

1 2 3 4

5 6 7 8

9 10 11 12

13 14 15 16

ALARM HDD NETWORK BACKUP REC

DVD RECORDER

REC

ZOOM

MODE

FREEZE

AUDIO

BACKUP

ALRAM

TELE WIDE VIEW PRESET

RETURN

SHR-6162/6164/7162/8162

USB

OPEN/CLOSE

PART NAMES AND FUNCTIONS (FRONT)

830/850/870

1 3 4

1610/1630/1650/1670

830D/850D/870D

1610D/1630D/1650D/1670D

9 8

1 3 4

7 6 5

1 3 4

6 5

8_ overview

9 8

1 3 4

7 6 5

Part Names Functions

ALARM : Lights on when an event occurs.

HDD : Displays the normal access to HDD.

Upon access to HDD, LED repeats on and off.

LED Indicator

Camera Control

REC Starts or ends the recording.

&/(

+/#

)/*

Direction / Select Button

NETWORK : Displays both network connection and data transfer status.

BACKUP : Displays when Backup is in progress.

REC : Lights on when recording is in progress.

PTZ : Sets PTZ Mode ON/OFF.

ZOOM(TELE) : Sets the screen to the x2 digital zoom.

Runs the TELE function in the PTZ Mode.

FREEZE(WIDE) : Runs the FREEZE function in the Live Mode.

Runs the WIDE function in the PTZ Mode.

BACKUP(VIEW) : Runs the BACKUP function.

Runs the Preset View function in the PTZ Mode.

SEARCH(PRESET) : Goes to the search screen.

Runs the Preset Setup function in the PTZ Mode.

Step Rewind (& ) : Used for backward frame-by-frame search while in PAUSE. Fast Rewind (() : Used for quick backward search while in Play.

(-x2, -x4, -x8, -x16, -x32, -x64)

Stop : Used to stop the playback.

Play/Pause : Used to pause or resume the screen.

Fast Forward ()) : Used for quick forward playback. (x2, x4, x8, x16, x32, x64) Step Forward ( *) : Used for forward frame-by-frame search while in PAUSE.

Used to change a value or move the cursor up/down/left/right (▲▼_ +). Selects a menu item or executes the selected menu.

! OVERVIEW

USB Port 1 / 2 Connects the USB devices.

Each button press in the Live Mode switches the screen to 16-, 9-, 4-, 6-, 8-, 13- split screen,

MODE

AUDIO Sets Audio ON/OFF.

ALARM

MENU/RETURN Either goes to the system menu screen or moves to the upper menu from the lower menu.

Channel

Jog shuttle

OPEN/CLOSE

Power

PIP, and auto sequence mode in order. In play mode, each press of the button will switch the screen mode to 13-, 1-, 4-, 9-, and 16-split in order. (1 live channel + (N-1) live channel)

Cancels the ALARM LED and the audible alarm when the alarm is going off, and to remove the icon.

Used to select channel numbers directly in the Live Mode, or numbers in the numeric input mode.

When a scroll bar appears in each menu, acts as a scrolling. In Play mode, - Jog : Pauses the playback and steps backward or forward.

- Shuttle : Fast playback forward or backward.

Used to open and close the DVR-RW disc tray. (available for SRD-830D/850D/870D/1610D/ 1630D/1650D/1670D only)

Power LED : Displays the power ON/OFF status. Power Button : Used to turn the DVR ON/OFF.

English _9

overview

PART NAMES AND FUNCTIONS (REAR)

830/830D

1610/1610D/1630/1630D

850/850D

1650/1650D

324 5 6 9 10 11 12 1413

324 5 6 7 8 9 10 11 12 1413

10_ overview

324 5 6 7 8 9 10 11 12 1413

870/870D

1670/1670D

! OVERVIEW

324 5 6 7 8 9 10 11 12 1413

English _11

overview

Part Names Functions

AUDIO IN

AUDIO OUT Audio Signal Output Port (RCA jack).

VIDEO IN Composite Video Signal Input Port (BNC type connector).

LOOP OUT Used to transfer a video signal to other video devices.

VIDEO OUT Composite Video Signal Output Port (BNC type connector).

VGA VGA Video Signal Output Port.

HDMI HDMI connector port.

eSATA 1/2 Ports used for external storage device connections. (SATA HDD)

NETWORK NETWORK connector port.

USB USB connector port.

RS-485 Used for RS-485 communication. (TX+, TX-, RX+, RX-)

Audio input signal port (RCA jack) and port for optional audio extension cable. SRD-1650/1650D/1670/1670D (Audio 5~16CH) SRD-850/850D/870/870D (Audio 5~8CH)

ALARM

SPOT

AC 100-240V~ IN

- ALARM IN 1~16(SRD-1610/1610D/1630/1630D/1650/1650D/1670/1670D) : Alarm Input port.

- ALARM IN 1~8(SRD-830/830D/850/850D/870/870D) : Alarm Input port.

- ALARM RESET IN : Alarm Reset port.

- ALARM OUT 1~4 : Alarm Output port.

A live screen output port, separate from the VIDEO OUT. SPOT 1 : Supports Single, 4-, 9-, 16-split, and Auto Sequence modes SPOT 2 : Supports Single, 4-split, and Auto Sequence modes (only for 5 ~ 8 CH). SPOT 3 : Supports Single, 4-split, and Auto Sequence modes (only for 9 ~ 12 CH). SPOT 4 : Supports Single, 4-split, and Auto Sequence modes (only for 13 ~ 16 CH).

SRD-1670D/1670 : SPOT 1, 2, 3, 4 SRD-870D/870 : SPOT 1, 2 SRD-830/830D/850/850D/1610/1610D/1630/1630D/1650/1650D : SPOT 1

AC 100 ~ 230V (PAL) AC 110 ~ 220V (NTSC)

12_ overview

REMOTE CONTROL

DVR

Available after switching to DVR mode by pressing the [DVR] button on the remote control.

Displays the search menu.

Changes the screen mode.

Displays the Exit pop up screen.

Used as the numeric input keys, or displays a single

Skip Backward (by unit time),

Slow Rewind, Slow Forward,

Skip Forward (by unit time)

Goes to the system menu screen.

Up/Down/Left/Right($%_ +)/ENTER

Moves the cursor up/down/left/right, and runs the

Freezes the screen temporarily.

Runs the digital zoom (x2) function.

Starts or ends the live recording.

Runs the View function in the PTZ mode.

MODE

POWER

NUMBER [0~+10]

channel.

T/W

Zooms in or out.

Select Menu.

FREEZE

ZOOM

REC

VIEW

BACKUP

Displays the Backup Menu.

OPEN/CLOSE

Opens or closes the CD tray.

DVR

Activates the DVR function.

Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key.

Move Frame

While paused, moves to the previous/next frame.

FR, STOP, PLAY/PAUSE, FF

PTZ

Displays or ends PTZ.

SCROLL ,.

Moves the menu scroll.

RETURN

Returns to the previous screen.

AUDIO

Turns Audio on/off.

ALARM

Cancels the Alarm.

REC LOCK

Selects the recording lock function.

PRESET

Displays the Preset Setup.

! OVERVIEW

Using the numeric buttons

CHANNEL 1–9 Press each button between 1 to 9.

CHANNEL 10 Press the [+10] button ﬁrst, then press the 0 button again within 3 seconds.

CHANNEL 11–16 Press the [+10] button ﬁrst, then press any number between 1 to 6 within 3 seconds.

English _13

overview

MONITOR

Available after switching to Monitor mode by pressing the [MONITOR] button on the remote control.

Selects the screen status automatically.

AUTO

ID RESET

Initializes the ID value to 00.

Selects the screen mode.

Turns the monitor power on/off.

Changes the system ID.

Adjusts the audio volume.

Displays the Setup Menu.

Up/Down/Left/Right($%_ +)/ENTER

Moves the cursor up/down/left/right, and runs the

Displays the video screen within a screen.

P.MODE

POWER

NUMBER [0~9]

+/–

Select Menu.

FREEZE

Screen Freeze.

UNDER SCAN

MONITOR

Activates the monitor function.

Sets the ID. Select 2 digits from 0 ~ 9 while pressing the ID Key.

MUTE

Mutes the audio out.

SOURCE

Selects the input signal source.

PIP

Selects or deselects the PIP function.

Using the Numeric buttons

CHANNEL 1–9 Press any button among 1 to 9.

Changing the Remote Control ID

Press the ID button of the remote control and check the ID displayed on the DVR screen.

1. The factory default ID of the remote control is 00.

Enter 2 digits of your selection in order, while pressing the system [ID] button.

2. When ID input is done, press the system [ID] button again to check the setting.

If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.

14_ overview

Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 50)

installation

Please take note of the followings before using this product.

Do not use the product outdoor.

Do not spill water or liquid in the connection part of the product.

Do not impose the system to excessive shock or force.

Do not pull out the power plug forcefully.

Do not disassemble the product on your own.

Do not exceed the rated input/output range.

Use a certiﬁed power cord only.

For the product with an input ground, use a grounded power plug.

CHECKING THE INSTALLATION ENVIRONMENT

! INSTALLATION

Samsung Digital Video Recorder (“DVR” hereinafter) is a state-of-art security device, and contains mass storage hard disk(s) and critical circuits inside.

When the temperature rises inside the product, the product may breakdown and the product life be shortened. Please pay attention to the following recommendations before installation.

The followings are the recommendations when Samsung DVR is installed on a rack.

Please ensure that the rack inside is not sealed.

1. Please ensure the air is circulated through the inlet/outlet as shown in the picture.

2. If the DVR or other devices on a rack is to be stacked as in the picture, provide a

3. suitable space or install a ventilating opening for air circulation.

For natural air convection, place the inlet at the bottom of the rack and the outlet on

4. top.

It is strongly recommended that a fan motor is installed at the inlet and the outlet for air

5. circulation. (Please ﬁt a ﬁlter at the inlet to screen dust or foreign substances.)

Please maintain the temperature inside the rack or surrounding areas between 0°C ~

6. 40°C (32°F ~ 104°F) as shown in the ﬁgure 1.

Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions :

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the

operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) speciﬁed by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that the

amount of air ﬂow required for safe operation of the equipment is not compromised.

C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is

not achieved due to uneven mechanical loading.

D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit

and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should

be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

Temperature Unit: ºC

One Year: 24HR X 365 DAY =8,760 HR

Life (Unit: HOURS)

[Figure 1]

[Figure 2]

English _15

installation

RACK INSTALLATION

Install the Bracket-Rack as shown in the ﬁgure, and then fasten the screws on both sides (2 screws on each side).

Fix the screws not to be loosened by vibrations.

HDD ADDITION

You can install additional HDDs. Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product.

Number of HDDs supported : SRD-830D/850D/870D/1610D/1630D/1650D/1670D : Default 1 HDD + Up to 4 HDDs added

SRD-830/850/870/1610/1630/1650/1670 : Default 1 HDD + Up to 5 HDDs added

Make sure to unplug the power cord from the wall outlet before proceeding with the installation.

By factory default, the unit is equipped with one HDD.

Please pay attention so that the data inside the HDD is not damaged. Before adding a HDD, please check the compatibility with this DVR product. HDD is vulnerable to malfunction due to its sensitive nature especially against shock when operating. Please ensure that the HDD is free from such shock. We are not liable for any damage to the HDD incurred by user’s carelessness or miss use..

Cases might cause damage to HDD or recorded data

To minimize the risk of data loss from a damaged HDD, please backup data as often as possible. Data may be lost due to external impacts during disassembly or installation of the DVR. HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during operation. HDD or ﬁles stored inside may be damaged if the main body is moved or impacted during the HDD operation.

Cautions for data loss (HDD care)

Cautions when adding a HDD

When adding a HDD, ensure that the cable does not get caught or the insulation does not come off.

Pay attention so as not to lose the disassembly screws or accessories.

If the screws or accessories are not put together correctly, the product may breakdown or not operate properly.

Please check the HDD compatibility before adding a HDD.

Please contact your nearest dealer to obtain the list of compatible devices.

16_ installation

If adding HDDs to SRD-830/850/870/1610/1630/1650/1670

First, loosen the screws on both sides and remove

the cover.

Disconnect the power and HDD Signal cable from

the existing HDDs, then loosen the screws (x4) in the left/right and upper sides and remove the upper brackets.

Lower Bracket

Cover

! INSTALLATION

Upper Bracket

Install HDDs (x2) on the lower bracket and ﬁx them

with screws.

Firmly secure the screw so that it does not become loose

from vibration.

Install HDDs (x3) on the upper bracket and ﬁx them

with screws.

When the installation of additional HDDs is done,

insert the lower and upper brackets into the DVR and ﬁx them with the provided screws.

Upper Bracket

Lower

Bracket

English _17

installation

When the installation of additional HDDs is done,

connect the power cable and connect the HDD signal cables (SATA Cable) to connectors  ~  on the main board.

You can check the HDD map directly on the DVR.

Refer to “Storage Device > HDD Map”. (Page 48)

Note that the order the HDD data cable is connected will

not affect the operation. The only consideration is the length of each cable.

SRD-830/1610/1630 do not support DVD media.

If adding HDDs to SRD-830D/850D/870D/1610D/1630D/1650D/1670D

First, loosen the screws on both sides and remove

the cover.

Cover

Disconnect the power and HDD Signal cable from

the existing HDDs, then loosen the screws (x4) in the left/right and upper sides and remove the upper brackets.

18_ installation

Upper Bracket

Lower Bracket

Install a HDD (x1) on the lower bracket and ﬁx it with

screws. Firmly secure the screw so that it does not become loose from vibration.

Install HDDs (x3) on the upper bracket and ﬁx them

with screws.

When the installation of additional HDDs is done,

insert the lower and upper brackets into the DVR and ﬁx them with the provided screws.

When the installation of additional HDDs is done,

connect the power cable and connect the HDD data cables (SATA Cable) to connectors  ~  on the main board.

Note that the number of a HDD data calbe is nothing to

do with operation of the HDD. Just make arrangements of the connectors considering the length of each connector.

Upper Bracket

Lower Bracket

! INSTALLATION

Check if the connectors are properly connected and

there is no problem with wiring, and close the cover and ﬁx it with screws.

Cover

English _19

connecting with other device

The following ﬁgures are based on Model SRD-1670D.

CONNECTING THE VIDEO, AUDIO, AND MONITOR

SPOT AC 100-240V~IN

AUDIO IN

AUDIO OUT

VIDEO OUT

(composite)

VIDEO OUT

(VGA)

VIDEO IN

HDMI

CONNECTING THE USB

There are two USB ports at the front and one at the back of the product.

You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port.

If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device >

Storage Device”. (Page 48)

This product supports hot-plugging, which connects/removes the USB device during the system operation.

If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.

20_ connecting with other device

CONNECTING EXTERNAL SATA HDD

SRD-830/830D/1610/1610D/1630/1630D does not support a port for SATA connection.

There are two external SATA ports on the rear side of the product.

If an external SATA HDD is connected to the system, recognition and settings are available in “Menu > Device >

Storage Device”.

The DVR supports Hot Plug function to allow connection and disconnection of SATA HDD devices while the

system is in use.

Only one SATA HDD can be connected to an external SATA port.

Use a cable shorter than 1 m for the external SATA HDD connections.

CONNECTING POS DEVICE

You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with

a RS-232C cable.

Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the

<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit and Transfer Type>. (Page 51)

! CONNECTING WITH OTHER DEVICE

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm In/Out port at the back is composed of the following.

Alarm In Port for SRD-830/830D/850/850D/870/870D

Alarm In Port for SRD-1610/1610D/1630/1630D/1650/1650D/

1670/1670D

Alarm Out Port

English _21

connecting with other device

ALARM IN 1 ~ 8 (SRD-830/830D/850/850D/870/870D) : Alarm Input Port

ALARM IN 1 ~ 16 (SRD-1610/1610D/1630/1630D/1650/1650D/1670/1670D) : Alarm Input Port

ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes

sensing. ALARM OUT 1 ~ 4 : Alarm Output Port

ALARM OUT ALARM IN ALARM IN

CONNECTING THE RS-485 DEVICE

Connect the RS-485 device through the back port.

For example, you can connect and control the PTZ camera which supports the RS-485 communication.

Transfer Type : You may select either Half Duplex or

Full Duplex as the data transfer type. Baud Rate : Supported Baud rates are 600/1200/

2400/4800/9600/19200/38400.

Check if the RS-485 device is compatible with the

product ﬁrst.

Pay attention not to change the polarity (+/–) of the

RS-485 device when connecting it.

Depending on camera’s type, connection polarity can be

different. For further information, refer to the respective PTZ Camera’s documentation.

Ex : DVR(TX+/–)

DVR(TX+/–)  SCC-C6403,07(TX+/–)

SCC-C6433,35(RX+/–)



PTZ device

Half Duplex Type

Data (–)

Data (+)

Full Duplex Type

Rx(+)

Rx(–)

Tx(–)

Tx(+)

Rear

Tx(–)

Tx(+)

Rx(–)

Rx(+)

22_ connecting with other device

CONNECTING THE NETWORK

Connecting to Internet through Ethernet (10/100/1000BaseT)

! CONNECTING WITH OTHER DEVICE

RJ-45 Ethernet Cable (Direct Cable)

INTERNET

Hub/Switcher

Back Bone

Connecting to the Internet using the router

INTERNET

xDSL or Cable

Router

Modem

Hub/Switcher

Windows Network Viewer

xDSL or Cable

Modem

External Remote

DDNS Server (Data Center)

English _23

connecting with other device

Connecting to Internet through ADSL

RJ-45 Ethernet Cable (Direct Cable)

INTERNET

Hub/Switcher

Phone(ADSL) Line

ADSL MODEM

Windows Network Viewer

24_ connecting with other device

live

REC

GETTING STARTED

Starting the system

Connect the power cable of the DVR to the wall outlet.

Press the Power button on the front panel.

You will see the initialization screen.

The initialization process will last about 1 minute. If a new HDD is installed, the initialization process may take longer.

The live screen appears with a beep.

! LIVE

Shutting Down the System

You can shut down the system only if you have logged in to the DVR. You require permission to shut down the system if you are not logged in as admin.

Press the [POWER] button on the remote control or the

front panel, or right-click to display the context sensitive menu and select <Shutdown>.

The “Shutdown” conﬁrmation window appears.

Use the arrow keys on the remote control or the front panel

to move to <OK> and press the [ENTER] button or click <OK>. The system will shut down.

For the permission management, refer to “Permission

Management > Setting Permissions”. (Page 41)

Shutdown

Are you sure to shutdown?

OK Cancel

English _25

live

To access a DVR or restricted menu, you should have logged in to the DVR.

In live mode, right-click any area of the screen.

You will see the context sensitive menu as in the right ﬁgure.

Click <Login>.

The login dialog appears. You can also see the login dialog to access a desired menu by pressing the [MENU] button on the remote control or the front panel.

The login dialog will also appear if you press a menu button on

the remote control or the front panel of the DVR when the corresponding menu requires logging in.

By default, initial ID and password are set to “admin”, and

“4321”.

ID admin



Password



OK Cancel

Scene Mode

Audio Off

Freeze

Stop Alarm

Record

Play

Backup

Main Menu

Shutdown

Hide Launcher



For the restricted permission, refer to “Permission Management > Setting Permissions”. (Page 41)

Locking All Buttons

This will restrict access to all buttons available in the DVR.

In Live mode, press buttons in the order of [STOP]

[FREEZE][STOP][FREEZE][MENU]. All buttons will be locked.

In the lock condition, press any button to display a dialog

where you are prompted to enter the password for unlocking the buttons. The button lock will be released if you enter the admin password.



Key Lock Password

ID admin



Password



OK Cancel

26_ live

LIVE SCREEN CONFIGURATION

Icons on the Live Screen

You can check the status or operation of the DVR with the icons on the live screen.

2010-01-01 00:00:01

CAM 01

Name Description

Current Date, Time

Screen Mode

System Operation

Video Input Status

Displays the current time and date.

When you are logged in, the “LOG ON” icon will be displayed.

Displayed if the zoom function is activated.

Displayed if you press the Pause button.

Displayed in Auto Sequence mode where all channels are switched at the speciﬁc time interval.

Displayed if the recording is in process. M To cancel the recording, enter the password.

Displayed if there is a problem with the cooling fan.

Displayed if the HDD is full and the DVR has an insufﬁcient space to record.

Displayed if no HDD is installed or the existing HDD should be replaced.

Displayed if the HDD needs a technical examination.

Displayed if a new ﬁrmware is found from the network.

Displayed if no input is entered in the condition that the camera is set to <ON>.

Nothing will be displayed on the screen if the camera is set to <OFF>.

! LIVE

Camera Name/ Channel

Camera Operation

Displays the camera name and the changed channel, if any.

Displays the resolution of the recording screen. (Page 56)

Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.

Displays AUDIO ON/MUTE. Not displayed in video mode if deactivated.

If the sensor is set to <ON>, the input signal will be displayed on the screen of the connected channel.

Displayed if a motion detected in the condition that the motion detection is set to <ON>.

Displays the current record mode from Record/Event/Schedule.

English _27

live

Error Information

If you turn on the system when the internal HDD is not connected or an error occurs, the “HDD FAIL” icon

( ) will be displayed on the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup.

If the cooling fan does not work properly or has a problem, the <Fan Information> window will appear and

the fan error icon ( ) will be displayed on the top left corner. In this case, check to see if the internal fan works. As a fan error can shorten the product life, make sure you contact the service center for assistance.

If you see the fan error icon or No HDD, HDD FAIL icons on the screen, contact the service center for more details.

Live Screen Menu

In addition to the buttons on the front panel or the remote control, you can access a desired menu by rightclicking the mouse any area in live mode. The context sensitive menu that appears by right-clicking the screen may differ, depending on the login/ logout, screen split mode and DVD operation mode.

Menu items of Search, Record, Backup, Shutdown and PTZ can be deactivated, depending on the user permission.

Scene Mode

Audio Off

Freeze

Stop Alarm

Record

Play

Backup

Main Menu

Shutdown

Hide Launcher



PTZ Control

ZOOM

Audio

Freeze

Stop Alarm

Record

Play

Backup

Main Menu

Shutdown

Hide Launcher



PTZ Alarm Freeze

< Split Mode Menu >

< Single Mode Menu >

Split Mode Menu

The context sensitive menu in split mode differs, depending on the login/logout status.

Scene Mode

Spot Out

Audio Off

Freeze

Stop Alarm

Record

Play

Backup

Main Menu

Shutdown

Hide Launcher

Logout

28_ live



Menu Description

Scene Mode Refer to “Live Mode”. (Page 31)

Spot Out Refer to “Spot Out”. (Page 33)

Audio On/Off Refer to “Audio ON/OFF”. (Page 34)

Freeze Refer to “Freeze”. (Page 34)

Stop Alarm

Stops the alarm output and the event monitoring. Refer to “Event Monitoring”. (Page 35)

Record/Stop Starts/stops the standard recording.

Play Plays the search result (data). Refer to “Search & Play > Play”. (Page 73)

Search Refer to “Search & Play > Search”. (Page 70)

Backup Refer to “Using the DVR > Setting the Backup”. (Page 60)

Main Menu Accesses the main menu. Refer to the Using the DVR section. (Page 36)

! LIVE

Shutdown

Show/Hide Launcher

Turns down the DVR.

Shows or hides the launcher. Refer to “View the Launcher Menu”. (Page 30)

Single Mode Menu

The single mode menu is available only in Single Mode. The context sensitive menu for the One Channel mode, in Split mode is different from that of the Single mode.

Menu Description

Full Screen

Spot Out

PTZ Control

ZOOM

Audio

Freeze

Stop Alarm

Record

Play

Shutdown

Hide Launcher

Logout



PTZ Alarm Freeze

Full Screen

PTZ Control

Select and click a desired channel in Split mode to switch to the full screen of the selected channel.

Accesses the PTZ Control menu. The PTZ menu is activated only in One-Channel Live mode. (Page 68)

ZOOM Enlarges the selected image. (Page 34)

English _29

live

View the Launcher Menu

The Launcher menu appears on the bottom of the live screen.

In Live mode, right-click to display the context menu and

select <Show Launcher>.

Move the cursor to the bottom and click a desired item in

the Launcher menu.

If no input is entered for 10 seconds, the menu will disappear.

The Launcher menu can be accessed only by using the mouse.

SRD-830/830D/850/850D/870/870D do not support the

16-split screen mode.

PTZ

Alarm Freeze

Menu Description

Displays the current time and date.

Date/Time

Screen Mode

Menu Expansion Button Click to display the hidden menu to the right.

Audio Turns ON/OFF the sound of the selected channel.

Zoom Enlarges the selected area. This is available only in Single Live mode.

PTZ Runs the PTZ Control launcher. This is available only in Single Live mode.

Alarm Stops the alarm if it's activated.

Freeze Freezes the Live screen temporarily.

Play Enters Play mode if a ﬁle to play exist, and if not, enters Search mode.

Record Start/End recording the Live screen.

The indication of AM/PM is displayed if you set 12 hours for the time format in “System > Date/Time/Language > Time”. (Page 36)

Displays in the sequence of 16-, 9-, 4-, 6-, 8-, 13-split, PIP and Auto Sequence. The current mode is highlighted in white.

30_ live

+ 100 hidden pages