Samsung SPR7000TS, SPR7000TB, SPR7000TG, SPR7000S, SPR7000G User Manual

...

Digital Cordless Telephone

SP-R7000

User’s Manual

Your batteries are guaranteed for six months. Please ensure you FULLY CHARGE the batteries for a period of AT LEAST 10 HOURS BEFORE you use your phone to make a call.

This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

ELECTRONICS

Printed in Korea

Code No. : GG68-00304A

English. 04/2002. Rev.1.0

9. This unit requires rechargeable Ni-MH batteries. Do not use alkaline batteries.

10. Clean the charge points with a dry

cloth from time to time.

11. Ringer Equivalence Number (REN)-1.0.

The REN is a customer guide indicating approximately the maximum number of items of apparatus that should be connected simultaneously to the line. The sum of REN’s of the individual items should not exceed a total value of 4.

12. You can use this equipment to make

999, or 112 emergency calls.

12. You can use this equipment on a

telecommunication system that uses Loop Disconnect or DTMF signalling.

It is strongly recommended that the equipment is configured to use DTMF signalling for access to public or private emergency services. DTMF signalling also provides faster call setup.

13. If you are connected to a Private

Branch Exchange, you may have to press a digit, for example “9”, to get an outside line. Then you dial as normal. If you need a pause, you should insert it after the digit and before the number you require.

14. You may sometimes experience problems in making calls. These difficulties can include:

• Line connection problems.

• Problems hearing the conversation on both ends of the line.

15. This equipment will NOT work at all if the mains or battery supply is removed.

16. You can connect the equipment to the telecommunication systems specified as long as you follow the instructions in this manual.

17. This equipment has been approved for use with the following facilities:

• Last Number Redial.

• Call Barring.

• Memory Dial.

Any other use will invalidate the approval of the equipment and it then ceases to comply with the standards against which approval was granted.

13. SAVE THESE INSTRUCTIONS.

1. Never push objects of any kind into your telephone through case or cabinet openings as they may touch dangerous voltage points resulting in risk of fire or shock.

2. To reduce the risk of electric shock, do not disassemble your telephone. Take it to a qualified service technician if repair work is required. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly could cause electric shock when the unit is subsequently used.

3. Unplug this unit from the telephone jack and wall outlet, and refer servicing to qualified service personnel under the following conditions:

• When the power supply cord, plug, or adaptor is damaged or frayed.

• If liquid has been spilled into the product.

• If the product has been exposed to rain or water.

• If the product does not operate properly after instructions have been followed.

• If the product has been dropped, or the cabinet appears damaged.

• If the product exhibits a distinct change in performance.

4. Avoid using your telephone during a lightning storm. There may be a remote risk of electric shock from lightning. If possible, unplug the AC adaptor and telephone cord for the duration of the lightning storm.

5. Never dispose of batteries in a fire. There is a serious risk of explosion and / or the release of highly toxic chemicals. Dispose of used batteries in accordance with local regulations.

6. When going on holiday or not using the phone for a long period of time, please disconnect the mains power from the base and remove the battery from the handset.

7. If the handset is not used for a long time and the battery becomes fully discharged, please recharge the handset for a minimum of 10 hours before using again.

8. If the battery is self-discharged because it has not been used, the operational life of the battery may be reduced. To recover the full storage capacity of the battery, recharge the battery for a minimum of 10 hours and use until it is fully discharged. This process needs to be repeated several times.

Safety Precautions and Important Notice

When using your telephone, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury.

2 3

Getting Started

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing Handset Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Charging the Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Turning the Handset On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

LCD Window Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Choosing Dial Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

General Functions

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Camp on Busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Caller ID Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Out of Range Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Battery Level Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Tone Dial Switchover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Registered Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Intercom Between Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call Transfer Between Handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Using the Menus

Accessing a Menu Option by Scrolling . . . . . . . . . . . . . . . . . . . . . . . 26

Accessing a Menu Option by Index System . . . . . . . . . . . . . . . . . . . . 27

Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

PhoneBook

Storing Phone Numbers and Names in the Phonebook . . . . . . . . . . . 29

Recalling a Number from Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . 31

Deleting Number(s) from the Phonebook . . . . . . . . . . . . . . . . . . . . . . 33

Call Log

Viewing and Dialling the Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Saving the Received Numbers in Phonebook . . . . . . . . . . . . . . . . . . . 36

Deleting the Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Greeting Message

Writing Greeting Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Barring

Setting Call Bar Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Ring

Selecting Ring Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Time

Call Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Ring Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Setting

Key Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Back Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Base Number Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Changing Flash Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

System

Registering a New Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Removing a Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Resetting a Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Changing PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Base

Selecting Base Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Finding Base Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Table of Contents

Your Phone

G ETTING

S TARTED

Unpacking

Once you have unpacked your phone, check to make sure that you have all the parts shown below. If any piece is missing or broken, please refer to your dealer.

Handset

Base

Adapter

Batteries

User’s Manual

Line Cord

Makes, answers, or ends a call. Allows you to access menu options and scrolls

through menu options. Also, adjusts volume.

Activates intercom communications. Deletes characters from display.

When held down in the menu system, returns to the previous menu level.

Turns the handset on or off when held down for about 3 seconds. Also, locks the keys when held down for about 2 seconds. When using menu options, confirms the menu or the option selected. In Standby mode, retrieves the last dialled numbers.

Handset

Getting Started

Rear

Battery cover

Indicator lamp

Charging points

Earpiece

Antenna

LCD window

Microphone

G ETTING

S TARTED

Connecting Lines

G ETTING

S TARTED

1. Connect one end of the telephone line cord to the phone line socket on the rear of the base, and the other end to a standard phone wall jack socket.

To AC wall outlet

To phone wall jack socket

Base - Front

Base - Rear

Paging button

Pages the handset. Also allows

you to register the handset.

Lower Lamp

Blinks when a call comes in

and lights steadily when a call

is in progress.

Upper Lamp

Lights when the base is

powered.

Phone Line Socket

Power Socket

2. Connect the modular end of the power adapter to the DC power socket on the rear of the base, and the other end to a standard AC wall outlet as shown.

1110

G ETTING

S TARTED

G ETTING

S TARTED

3. Replace the battery cover. Make sure that the cover is properly aligned.

Slide the cover up until it snaps shut.

Notes:

• The battery needs to be replaced if it does not recover its full storage

capacity after recharging.

• When replacing the battery, only use a SAMSUNG-approved battery.

For details, see ‘Specifications’ on page 53 or ask your nearest service representative.

Installing Handset Batteries

2. Insert new batteries observing correct polarity ( + , - ). Reversing the orientation may damage the handset.

The handset uses the 2 rechargeable Ni-MH batteries (AAA size) supplied.

1. Slide the battery cover in the direction of the arrow.

Charging the Handset

Before initial operation, YOU SHOULD FULLY CHARGE THE HANDSET for more than 10 hours. Failure to do so will result in poor battery performance which is not covered under the terms of the warranty. Also for the charging of the additional handset.

To charge the handset, simply place it on the base unit.

When charging, the handset automatically turns on. The green lamp on the top of the handset light up and the icon on the LCD repeats filling and emptying.

1312

G ETTING

S TARTED

G ETTING

S TARTED

2. To turn the handset off, press and hold the button for about three seconds until Bye appears on the LCD window.

Result : The handset turns off.

Notes:

• If you purchase an additional handset, you must register the handset

to a base. If not, the display shows Fail To Register when you turn it on and only the or and buttons work to allow you to register the handset. Refer to ‘Registering a New Handset’ on page 46.

• Nothing will appear on the LCD window when battery power is very

low. You should fully charge the handset before operation.

HS(1 ) BS(1 )

SAMSUNG

LCD Window Icons

Indicates signal strength. Indicates that the handset has engaged the line. Indicates that the handset is using the intercom feature. Indicates that there is a call you did not answer. Indicates that the buttons are locked.

Indicates the battery status.

In order to provide compatibility with most telephone systems, your phone can be set to either pulse-dialling (same as rotary), or tone dialling (DTMF). Your phone is preset to Tone mode.

1. In the Standby mode, press the ( or ) button to access the Main Menu mode.

2. Press the ( or ) button repeatedly until Setting is selected, then press the button.

3. When Set Dial appears with the > mark, press the button.

Result : The current setting is displayed; Pulse or Tone.

4. Press the ( or ) button to change the dial mode.

5. Press the button to save the setting.

Note: It may not be available depending on your country.

Choosing Dial Mode

HS(1 ) BS(1 )

SAMSUNG

Turning the Handset On/Off

When you place the handset on the base unit to charge it, the handset automatically turns on. To turn the handset on or off in the Standby mode, follow these steps:

1. To turn on the handset when the display is off, press the button. Result : The LCD window shows the handset and base number, and

the greeting message SAMSUNG as shown below. The phone is now ready for use. To change the greeting, see page 38.

1514

G ENERAL FUNCTIONS

Making a Call

1. Open the flip cover, and press the button. You hear a dial tone.

2. Dial the desired phone number by using the number keypad.

Note: While entering a phone number, the button enters ‘P’, a hard pause. The number after a pause will be automatically sent 4 seconds after the first number is dialled. A pause is useful when you access an interactive voice response system, such as an automated banking system.

3. When the other person answers, speak.

4. To end the call, either close the flip cover or press the button.

Notes:

• If you turn the ‘Call Time’ feature on, the LCD window displays the call time. For details, see ‘Call Time’ on page 41.

• To make a call to the last number you dialled, use the ‘Redial’ feature. For details, refer to ‘Last Number Redial’ on page 16.

• You can store telephone numbers in Phonebook memory and dial the numbers using the assigned memory address. Refer to ‘Phonebook’ on page 29.

You can enter the desired phone number in the Standby mode, which allows you to make corrections before dialling. Follow these steps:

1. Enter a telephone number. Check the number on the LCD window.

Note: If you make a mistake while entering a number, press the button to clear the last digit and correct the number. If you press and hold the button for more than one second, all digits you have entered are cleared and the handset returns to the Standby mode.

2. When the number appears correctly, press the button to dial the

number.

General Functions

(Available only when you have more than one handset)

This feature allows your handset to wait for connection to the telephone line currently engaged by another handset. Your handset rings when the telephone line becomes free.

1. You will hear a short busy tone if you press the button while another handset engages the telephone line.

Result : The display shows the handset number currently engaging the

line and your handset is automatically camped on the line.

Note: To cancel this feature, press the button any time before the line is free. The handset returns to the Standby mode.

2. When the line becomes free, your handset rings and the window displays Free.

3. Press the button to engage the line while the handset rings.

Notes:

• If an incoming call arrives while your handset rings to tell you the line

is free, the ‘Camp On Busy’ feature is automatically cancelled and an incoming ring sounds.

• Several handsets can be camped on the busy line in chronological

order. When the line becomes available to you, the LCD window displays Free, and other handsets will display your handset number following the word Busy.

• When your handset rings and the window displays Free, press the

button within 10 seconds. Otherwise, the handset returns to the

Standby mode.

Camp On Busy

B ASIC O PERATION

Last Number Redial

Your handset allows you to call the most recently dialled number again. It stores the last 10 numbers you called respectively 01 through 10.

To dial the last number

1. Press the button to retrieve the last number.

2. Press the button.

To View and Dial Any of Last 10 Numbers

1. Press the button in the Standby mode.

2. Press the ( or ) button to scroll through the redial memory. Result : Each time you press the button, the numbers you dialled are

displayed with the memory cell number. Cell 01 stores the most recent number and cell 10 stores the first number.

3. Press the button to dial the selected number.

Notes:

• Each time you dial a new number, the first number stored in the redial

memory is automatically erased, and the redial memory is updated.

• You can modify the number displayed by using the button before

pressing the button.

To Erase All Numbers In Redial Memory

1. In the Standby mode, press the ( or ) button to access the Main

Menu mode.

Speed Dial

Once you have stored phone numbers in the phone book memory, you can easily dial the numbers with one or two touches of the corresponding number key. For details on storing a number, refer to page

29. To speed dial the desired number: For the 1-digit memory cell number (01 through 09), press and hold down

the second digit on the keypad. For example: Cell no. 02

Press and hold down

For the 2-digit memory cell number (10 through 80), press the first digit briefly and hold down the second digit.

For example: Cell no. 29

Press and hold down

B ASIC O PERATION

2. Press the ( or ) button repeatedly to scroll to System, then press the button.

Result : The display asks you to enter the PIN code.

3. Enter the PIN, then press the button.

Note: The PIN is preset to “0000” at the factory. You can change the PIN. For details, see page 49.

4. Press the ( or ) button repeatedly to scroll to Redial Clr, then press the button.

5. When you are asked to confirm the deletion, press the button.

+ 20 hidden pages