Samsung SPH-I325 User Manual

Download

User Guide

Samsung ACE

www.sprint.com

2/29/08

I325_BA26_PS_022808_F7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Your Device’s Menu . . . . . . . . . . . . . . . . . . . . . . . ii

Section 1: Getting Started . . . . . . . . . . . . . . . . . . 1

1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . 2

Setting Up Your Device . . . . . . . . . . . . . . . . . . . . . . 2

Getting Started With Sprint Service . . . . . . . . . . . . 5

Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . 6

Sprint Account Passwords . . . . . . . . . . . . . . . . . . . 6

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Section 2: Your Device. . . . . . . . . . . . . . . . . . . . 11

2A. Device Basics . . . . . . . . . . . . . . . . . . . . . . . 12

Your Device Features . . . . . . . . . . . . . . . . . . . . . 12

Viewing the Display Screen . . . . . . . . . . . . . . . . . 17

Features of Your Device . . . . . . . . . . . . . . . . . . . 22

Turning Your Device On and Off . . . . . . . . . . . . 23

Using Your Device’s Battery and Charger . . . . . 24

Navigating Through Device Menus . . . . . . . . . . . 27

Displaying Your Phone Number . . . . . . . . . . . . 28

Making and Answering Calls . . . . . . . . . . . . . . . 28

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2B. Your Device’s Settings . . . . . . . . . . . . . . . 40

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Power Management . . . . . . . . . . . . . . . . . . . . . . . 46

Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . 51

TTY Use With Sprint Service . . . . . . . . . . . . . . . . 54

Device Customization . . . . . . . . . . . . . . . . . . . . . . 56

Using Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . 58

2C. Your Device’s Security . . . . . . . . . . . . . . . . 61

Accessing the Security Menu . . . . . . . . . . . . . . . 61

Using Your Device’s Device Lock Feature . . . . . 61

Using Special Numbers . . . . . . . . . . . . . . . . . . . . 64

Using Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Managing Certificates . . . . . . . . . . . . . . . . . . . . . . 65

Resetting Your Device . . . . . . . . . . . . . . . . . . . . . . 66

Security Features for Sprint Power Vision . . . . . 66

2D. Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Understanding Roaming . . . . . . . . . . . . . . . . . . . 68

Setting Your Device’s Roam Mode . . . . . . . . . . . 69

2E. Call History . . . . . . . . . . . . . . . . . . . . . . . . . 71

Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Call History Options . . . . . . . . . . . . . . . . . . . . . . . . 72

Making a Call From the Call History . . . . . . . . . . 74

Saving a Phone Number From Call History . . . 74

Deleting Call History Entries . . . . . . . . . . . . . . . . . 75

2F. Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Adding a New Contacts Entry . . . . . . . . . . . . . . . 76

Assigning Speed Dial Numbers . . . . . . . . . . . . . 77

Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . 78

Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . 80

Adding a Phone Number to a

Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Editing a Contacts Entry’s Phone Number . . . . 81

Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . 81

Deleting Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 81

Beaming a Contacts Entry . . . . . . . . . . . . . . . . . . 82

Selecting a Ringer Type for an Entry . . . . . . . . . 82

Dialing Sprint Services . . . . . . . . . . . . . . . . . . . . . 83

2G. Calendar and Tools . . . . . . . . . . . . . . . . . . 84

Using Your Device’s Calendar . . . . . . . . . . . . . . 84

Using Your Device’s Alarm Clock . . . . . . . . . . . 88

Using Your Device’s Notepad . . . . . . . . . . . . . . . 89

Using Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Managing Voice Memos . . . . . . . . . . . . . . . . . . . 94

Using the Tip Calculator . . . . . . . . . . . . . . . . . . . 96

Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . 96

Using the Smart Converter . . . . . . . . . . . . . . . . . 97

Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . 97

Using the World Clock . . . . . . . . . . . . . . . . . . . . . 98

Using the File Viewer . . . . . . . . . . . . . . . . . . . . . . 98

2H. Using the microSD Card . . . . . . . . . . . . . . 99

Using Your Device’s microSD Card

and Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

microSD Settings . . . . . . . . . . . . . . . . . . . . . . . . 101

microSD Folders . . . . . . . . . . . . . . . . . . . . . . . . . 102

Connecting Your Device to Your Computer . . 103

General Precautions . . . . . . . . . . . . . . . . . . . . . . 105

2I. Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Adjusting Settings . . . . . . . . . . . . . . . . . . . . . . . . . 110

Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . 112

Working with Pictures and Videos . . . . . . . . . . . 114

Sending Pictures and Videos by Email . . . . . . 118

Printing Pictures via Bluetooth . . . . . . . . . . . . . . 119

2J. Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Turning Bluetooth On and Off . . . . . . . . . . . . . . 121

Using the Bluetooth Settings Menu . . . . . . . . 122

Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . 123

Bluetooth Information Settings . . . . . . . . . . . . . . 125

Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . 126

Beaming Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Using Hands-Free Devices . . . . . . . . . . . . . . . . 130

Bluetooth OBEX FTP . . . . . . . . . . . . . . . . . . . . . 130

Using a Bluetooth Virtual Serial Port . . . . . . . . . 131

2K. Mobile Applications . . . . . . . . . . . . . . . . 132

Launching Internet Explorer . . . . . . . . . . . . . . . . 132

Using Live Search . . . . . . . . . . . . . . . . . . . . . . . . 134

Using the RSS Reader . . . . . . . . . . . . . . . . . . . . 135

Using Internet Sharing . . . . . . . . . . . . . . . . . . . . 137

2L. Synchronizing with ActiveSync . . . . . . 138

ActiveSync Requirements . . . . . . . . . . . . . . . . . 138

Synchronization Overview . . . . . . . . . . . . . . . . . 139

Setting Up and Configuring ActiveSync . . . . . 140

Connecting with Your Computer . . . . . . . . . . . 142

Setting up Windows Media Player

Sync Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Synching Music via Windows Media Player . . 144

Creating a Custom Ring Tone . . . . . . . . . . . . . . 145

Section 3: Sprint Service Features . . . . . . . . 147

3A. Sprint Service Features: The Basics . 148

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Using SMS Text Messaging . . . . . . . . . . . . . . . . 154

Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Responding to Call Waiting . . . . . . . . . . . . . . . . 157

Making a Three-Way Call . . . . . . . . . . . . . . . . . . 158

Using Call Forwarding . . . . . . . . . . . . . . . . . . . . 158

3B. Software Store and TV . . . . . . . . . . . . . . 160

Using the Sprint Software Store . . . . . . . . . . . . 160

Your Sprint TV Channel Options . . . . . . . . . . . . 161

Playing a Video or Audio Clip . . . . . . . . . . . . . . 161

Sprint TV FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

3C. Sprint Voice Command . . . . . . . . . . . . . 164

Getting Started With Sprint Voice Command . 164

Creating Your Own Address Book . . . . . . . . . . 165

Voice Command Settings . . . . . . . . . . . . . . . . . 166

Making a Call With Sprint Voice Command . . 167 Looking Up a Contact With Sprint

Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . 168

Launching an Application With Sprint

Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . 168

3D. Sprint Worldwide Wireless Service . . . 169

Your SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Using Your Device in GSM Mode . . . . . . . . . . . 171

Using Your SIM Card’s PhoneBook . . . . . . . . . 175

Setting GSM Services Options . . . . . . . . . . . . . 177

Contacting Sprint . . . . . . . . . . . . . . . . . . . . . . . . 178

Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

Selecting a Network . . . . . . . . . . . . . . . . . . . . . . 180

Section 4: Safety and Warranty Information 182

4A. Important Safety Information . . . . . . . . . 183

General Precautions . . . . . . . . . . . . . . . . . . . . . . 183

Maintaining Safe Use of and Access to

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

Using Your Phone With a Hearing

Aid Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Caring for the Battery . . . . . . . . . . . . . . . . . . . . . 187

Radio Frequency (RF) Energy . . . . . . . . . . . . . 188

Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . 189

Phone Guide Proprietary Notice . . . . . . . . . . . . 189

4B. Manufacturer’s Warranty . . . . . . . . . . . . 190

Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . 190

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

Introduction

This User Guide introduces you to Sprint® Service and all the features of your new device. It’s divided into four sections:

⽧ Section 1: Getting Started ⽧ Section 2: Your Device ⽧ Section 3: Sprint Service Features ⽧ Section 4: Safety and Warranty Information

Throughout this guide, you'll find tips that highlight special shortcuts and timely reminders to help you make the most of your new device and service. The Table of Contents and Index will also help you quickly locate specific information.

You'll get the most out of your device if you read each section. However, if you'd like to get right to a specific feature, simply locate that section in the Table of Contents and go directly to that page. Follow the instructions in that section, and you'll be ready to use your device in no time.

User Guide Note

WARNING

Because of updates in your device’s software, this printed guide may not be the most current version for your phone. Visit www.sprint.com and log on to most recent version of the user guide.

Please refer to the Important Safety Information section on page 183 to learn about information that will help you safely use your device. Failure to read and follow the Important Safety Information in this user guide may result in serious bodily injury, death, or property damage.

My Sprint Wireless to access the

Your Device’s Menu

The following list outlines your device’s menu structure. For more information about navigating through the menus, please see “Navigating Through Device Menus” on page 27.

Messaging

1: Text Messages

2: New E-mail Account...

Contacts

Organizer

1: A lar ms

2: Calendar

3: Notepad

4: Tasks

5: Voice Notes

6: World Clock

Call History

Internet

1: Internet Explorer

2: RSS Reader

1: CBS Financial 2: CBS Internet 3: CBS Top Stories 4: BBC News 5: NYT: Home Page 6: Topix Top Stories 7: Yahoo US News

Camera

1: C ame ra

Press Menu (right softkey), and then use the navigation key to scroll through and display the following options:

1: Shooting Mode

1: Single shot 2: Multi shot 3: Mosaic shot 4: Frame shot 5: Night shot

2: Size

1: 1280x960 2: 640x480 3: 320x240

3: Timer

1: Of f 2: 2 sec 3: 5 sec 4: 10 sec

4: White Balance

1: Auto 2: Daylight 3: Cloudy 4: Tungsten 5: Fluorescent

5: Effect

1: No effects 2: Sepia 3: B/W 4: Negative

6: Help

7: Settings

1: Ge ne ral

2: Camera

3: Camcorder

2: Camcorder

Press Menu (right softkey), and then use the navigation key to scroll through and display the following options:

1: S ize

1: 320x240 2: 176x144

2: Timer

1: Off 2: 2 sec 3: 5 sec 4: 10 sec

3: White Balance

1: Auto 2: Daylight 3: Cloudy 4: Tungsten 5: Fluorescent

4: Audio

1: On 2: Off

5: Effect

1: No effects 2: Sepia 3: B/W 4: Negative

6: Help

7: Settings

1: General

2: Camera

3: Camcorder

iii

Settings

1: Call Options

1: Any key answer

2: Auto answer

1: Off 2: 3 seconds 3: 5 seconds 4: 10 seconds

3: Phone number

4: Voice mail number

5: International code

2: Display

1: H om e Sc reen

1: Home screen layout

2: Color scheme

3: Background image

4: Time out

2: Start Menu Style

1: Grid 2: List

3: Sounds

1: Ring Tone

1: Vibrate 2: None 3: Anticipation 4: Bug’s Song 5: Charming Intro Tone 6: City Light 7: Classic Bell 8: Color Lounge 9: Fast Tone 10: Floating Tone 11: Gliter Tone 12: Highway 101 13: Maze of City 14: Pause Tone 15: Rich Tone 16: Samsung Tune 17: Serene Tone 18: Serene Tone2 19: Spanish Guitar 20: Squash Tone 21: Sunny Day 22: Techno Dance 23: Tremolo Tone 24: Tumble Tone 25: Vivid Street

2: Notification

1: New e-mail

2: New text message

3: New voice message

4: New instant message

3: System Sound

1: Exclamation

2: Question

3: Warnings

4: Keypad Tone

1: Keypad Control

5: Call Alert

1: Minute beep (On/Off)

2: Connect tone (On/Off)

3: Signal fade tone (On/Off)

6: R2VS

1: None 2: 3D Sound 3: M-Theater

4: Profiles

Press Menu (right softkey) > Edit and then use the navigation key to scroll through and display the following options:

1: N orm al

1: Name (Normal)

2: Ring type

3: Ring volume

4: Alarm type

5: Alarm volume

6: Reminder type

7: Reminder volume

8: Notification type

9: Notification volume

10: System sound volume

2: Silent

1: Name (Silent)

2: Ring type

3: Ring volume

4: Alarm type

5: Alarm volume

6: Reminder type

7: Reminder volume

8: Notification type

9: Notification volume

10: System sound volume

3: Vibrate

1: Na me (V ib rat e)

2: Ring type

3: Ring volume

4: Alarm type

5: Alarm volume

6: Reminder type

7: Reminder volume

8: Notification type

9: Notification volume

10: System sound volume

4: Outdoor

1: Name (Outdoor)

2: Ring type

3: Ring volume

4: Alarm type

5: Alarm volume

6: Reminder type

7: Reminder volume

8: Notification type

9: Notification volume

10: System sound volume

5: Automatic

5: Power Management

1: Main battery

2: Backlight time out

1: 5 seconds 2: 10 seconds 3: 15 seconds 4: 30 seconds 5: 60 seconds 6: Never

3: Display time out

1: 10 seconds 2: 15 seconds 3: 30 seconds 4: 1 minute 5: 2 minutes 6: 5 minutes 7: 10 minutes 8: Never

4: Display brightness

1: Level1 2: Level2 3: Level3 4: Level4 5: Level5

5: Keypad backlight time out

1: 1 second 2: 2 seconds 3: 3 seconds 4: 4 seconds 5: 5 seconds 6: 10 seconds

6: Keypad backlight on

1: An y time

2: Custom time

3: Start time (after 00:00 - af ter 23:00)

4: End time (until 00:00 - until 23:00)

6: Connections

1: Wireless Manager

1: All 2: Bluetooth 3: Phone

2: Bluetooth

3: Bluetooth Profiles

1: OBEX FTP Server Setting 2: BPP Setting 3: My Information Setting

4: Dial-up

1: New... 2: Phone as Modem 3: Sprint Data

5: Proxy

1: Ne w.. .

6: VPN

1: Ne w.. .

7: More...

1: USB to PC

7: More...

1: Date and Time

2: Roaming

3: Security

1: Device Lock

2: Certificates

3: Encryption

4: Emergency Numbers

5: Phone Reset

4: Memory Information

5: Word Completion

6: Remove Programs

7: More...

1: Accessibility

2: Key Settings

3: Regional Settings

4: Other Settings

5: Phone Information

6: Owner Information

7: More...

vii

Windows Media

1: My Music

2: My Videos

3: My TV

4: My Playlists

5: Now Playing

Voice Command

ActiveSync

File Explorer

Accessories

1: Calculator

2: Smart Converter

1: Currency 2: Length 3: Weight 4: Volume 5: Area 6: Temperature

3: Speed Dial

1: Voicemail

4: Stopwatch

viii

5: Task Manager

6: Tip Calculator

7: V is ion

Press Menu (right softkey) and then use the navigation key to scroll through and display the following options:

1: Enable Vision 2: Update Profile

Games

1: Bubble Breaker

2: Solitaire

File Viewer

Get On Demand

International Usage

Internet Sharing

Live Search

Pictures & Videos

Service Mode

Software Store

Sprint TV

In Use Menu

Press Menu to display the following options:

1: Mute/Unmute 2: Speakerphone On/Off 3: Turn Hands-free On/Off 4: Contacts 5: Save to Contacts 6: View Calendar 7: Call History

Section 1

Getting Started

Section 1A

Setting Up Your Device

Setting Up Service

⽧ Setting Up Your Device ⽧ Getting Started With Sprint Service ⽧ Setting Up Your Voicemail ⽧ Sprint Account Passwords ⽧ Getting Help

Setting up service on your new device is quick and easy. This

section walks you through the necessary steps to set up, turn on, and unlock your device; set up your voicemail; establish passwords; and contact Sprint for assistance with your Sprint service.

2 Section 1A. Setting Up Service

1. Remove the battery cover.

䡲 Press down with thumbs as indicated below. 䡲 While applying pressure, slide cover away from

the camera lens (as shown below).

2. Install the battery.

䡲 Insert the battery into the opening on the back of

the device, making sure the connectors align. Gently press down to secure the battery.

䡲 Position the battery cover and firmly slide it in until

you hear a click.

3. Press to turn the

device on.

䡲 Your device will turn on,

search for Sprint service, and then enter standby mode.

䡲 If your device is not yet

activated, or if it is locked, see “Getting Started With Sprint Service” on page 5 for more information.

Initial Setup

After you have powered on your device, you may wish to set some basic options. After the initial power-up, your device will display the Windows Mobile® screen where you will be guided through a series of setup procedures.

1. From initial screen, press Next (right softkey) to

begin the setup process.

Section 1A. Setting Up Service 3

Setting Up Service

Use both the navigation key and keypad to enter new values within the date and time fields. See “Configuring the Time and Date” on page 59..

● To toggle between AM and PM, highlight the

AM/PM field and then press either or

P (PM) on the keypad.

A (for AM)

3. Press Next (right softkey) to continue on to the

password setup screen where you can create a password which must be used to access your device’s features and data. See “Locking Your Device with a Password” on page 61.

– or – Skip to step 7 if you do not wish to assign a

password at this time.

4. Select “Prompt if device unused for” and press

. (Enabling this option activates the remaining

fields.)

5. Select each field and enter the desired information:

䡲 Minutes: to select the amount of unused time (idle)

required before you are prompted for a password.

䡲 Password type: to choose from one of the following

PIN types:

4 Section 1A. Setting Up Service

● Simple PIN: must be at least four characters in

length and cannot contain a simple sequence s u c h a s 00 0 , 1111, o r 12 3 4 .

● Strong alphanumeric: must be at least seven

characters in length and must contain at least one character from each of the following categories: uppercase/lowercase letters, numerals, and symbols. Examples of strong alphanumeric passwords are

%$VH5hW.

䡲 Password: use the keypad to enter the desired

sb?8A!3 and

password.

䡲 Confirm password: use the keypad to re-enter the

same password.

6. Press Done (left softkey) to store these settings.

7. From the E-mail screen, press Skip (left softkey) to

return to the email account setup process at a later time, or press

Next (right softkey) to continue with

the setup process.

䡲 For more information, please see the Set UpYour

Email guide included with your device.

8. Press Next (right softkey) to choose whether you

would like to participate in the Windows® Feedback program.

䡲 Select either Enable or Disable and press Done

(left softkey).

Some data connection charges may apply during the

Note

feedback update process.

Your device’s battery should have enough charge to

Note

power on the device, find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible. See “Charging the Battery” on page 25 for details.

Getting Started With Sprint Service

Determining Whether Your Device Is Activated

If you purchased your device at a Sprint Store, it is probably activated, unlocked, and ready to use. If you received your device in the mail, it has probably already been activated; all you need to do is unlock it.

If your device is not activated, please call Sprint Customer Service at

1-800-SPRINT1 (1-800-777-4681).

Unlocking Your Device

1. Press to turn the device on.

2. Press Unlock (left softkey).

To select a softkey, press the softkey button directly

Note

below the softkey text that is displayed at the bottom left and bottom right of your device’s display screen. Softkey actions change according to the screen you’re viewing and will not be displayed if there is no corresponding action available.

3. Press to unlock the device.

If you can’t recall your lock code, try using the last four

Tip

digits of your wireless phone number. If this doesn’t work, call Sprint Customer Service at

1-800-SPRINT1(1-800-777-4681).

Section 1A. Setting Up Service 5

Setting Up Service

Using your Device to Call

䊳 Make your first call.

䡲 Use your keypad to enter a phone number. 䡲 Press .

See “Making and Answering Calls” on page 28.

Setting Up Your Voicemail

All unanswered calls to your device are automatically transferred to your voicemail, even if your device is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your device is activated.

1. From standby mode, press and hold .

2. Follow the system prompts to:

䡲 Create your passcode. 䡲 Record your name announcement. 䡲 Record your greeting.

6 Section 1A. Setting Up Service

䡲 Choose whether to activate One-Touch Message

Access (a feature that lets you access messages simply by pressing and holding , bypassing the need for you to enter your passcode).

Voicemail Passcode

Note

If you are concerned about unauthorized access to your voicemail account, Sprint recommends that you enable your voicemail passcode (do not activate OneTouch Message Access).

For more information about using your voicemail, see “Using Voicemail” on page 148.

Sprint Account Passwords

As a Sprint customer, you enjoy unlimited access to your personal account information, your voicemail account, and your Sprint Power Vision account. To ensure that no one else has access to your information, you will need to create passwords to protect your privacy.

Account Password

If you are the account owner, you'll have an account password to sign on to

www.sprint.com and to use when

calling Sprint Customer Service. If you are not the account owner (if someone else receives the bill for your Sprint Service), you can get a sub-account password at

www.sprint.com.

Voicemail Password

You'll create your voicemail password (or passcode) when you set up your voicemail. See “Setting Up Your Voicemail” on page 148. for more information on your voicemail password.

Sprint Power Vision Password

With your Sprint Power Vision smart device, you may elect to set up an optional Sprint Power Vision password to control data access and authorize Premium Services purchases.

For more information, or to change your passwords, sign on to Service at

www.sprint.com or call Sprint Customer 1-800-SPRINT1 (1-800-777-4681).

Getting Help

Visit www.sprint.com

You can go online to:

䢇 Access your account information. 䢇 Check your minutes used (depending on your Sprint

service plan).

䢇 View and pay your bill. 䢇 Enroll in Sprint online billing and automatic payment. 䢇 Purchase accessories. 䢇 Shop for the latest Sprint devices. 䢇 View available Sprint service plans and options. 䢇 Learn more about Sprint Power Vision and other

great products like Sprint TV screen savers, and more.

䢇 See “Dialing Sprint Services” on page 83.

Section 1A. Setting Up Service 7

, games, ringers,

Setting Up Service

Reaching Sprint Customer Service

You can reach Sprint Customer Service in many different ways:

䢇 Press on your device. 䢇 Sign on to your account at www.sprint.com. 䢇 Call us toll-free at 1-800-SPRINT1 (1-800-777-4681)

(Consumer customers) or

1-800-927-2199 (Business

customers).

䢇 Write to us at Sprint Customer Service, P.O. Box 8077,

London, KY 40742.

Receiving Automated Billing Information

Your device lets you access billing information on your Sprint account. This information includes balance due, payment received, invoicing cycle, and an estimate of the number of minutes used since your last invoicing cycle.

To access automated billing information:

䊳 Press on your device.

This service may not be available in all Affiliate areas.

Note

8 Section 1A. Setting Up Service

Sprint 411

Sprint 411 gives you access to a variety of services and information through your device, including residential, business, and government listings; movie listings or showtimes; driving directions, restaurant reservations, and major local event information. You can get up to three pieces of information per call, and the operator can automatically connect your call at no additional charge.

There is a per-call charge to use Sprint 411, and you will be billed for airtime.

To call Sprint 411:

䊳 Press on your device.

Sprint Operator Services

Sprint Operator Services provides assistance when placing collect calls or when placing calls billed to a local telephone calling card or third party.

To access Sprint Operator Services:

䊳 Press on your device.

For more information or to see the latest in products and services, visit us online at

www.sprint.com.

Setting Up Service

Section 1A. Setting Up Service 9

Section 2

Your Device

Section 2A

1. Ea rp iece

2. Display Screen

3. OK Key

4. Left Softkey

5. Talk Key

9. Plus Code

Dialing Key

6. Home/

7. Voicemail Key

Task Manager Key

8. Function Key

14. Keypa d

12. Microphone

10. Space/Silent

16. End Key

17. Right Softkey

18. Navigation

13. Ca mera Key

11. Messaging Key

15. Back/Clear

Mode Key

Key

Device Basics

⽧ Your Device Features ⽧ Viewing the Display Screen ⽧ Features of Your Device ⽧ Turning Your Device On and Off ⽧ Using Your Device’s Battery and Charger ⽧ Navigating Through Device Menus ⽧ Displaying Your Phone Number ⽧ Making and Answering Calls ⽧ Entering Text

Your device is packed with features that simplify your life and expand your ability to stay connected to the people and information that are important to you. This section will guide

you through the basic functions and calling features of your device.

12 Section 2A. Device Basics

Your Device Features

19. Mirror

21. Battery Cover

23. External

22. Camera Lens

Speaker

20. Thumbwheel

26. Power Button

25. Volume Key

24. Power/Accessory

27. microSD Slot

28. Back-Clear/

Interface Connector

Camera Access Key

Device Basics

Section 2A. Device Basics 13

Key Functions

1. Earpiece lets you hear the caller and automated

prompts.

2. Display Screen displays all the information needed

to operate your device, such as the call status, the Contacts list, the date and time, and the signal and battery strength.

3. OK Key lets you access the device’s menus and

selects the highlighted choice when navigating through a menu.

4. Lef t Softkey lets you select softkey actions or menu

items corresponding to the bottom left line on the display screen. For example, when you receive an incoming call, you would press Answer (left softkey) to accept the call.

5. Ta lk K ey allows you to place or receive calls, answer

Call Waiting, use Three-Way Calling, or activate Voice Command.

䡲 In standby mode, press once to access your call

history (page 71).

䡲 Press twice to call the most recent phone number

from the call history list (page 71).

14 Section 2A. Device Basics

䡲 Press and hold this key to launch the Voice

Command feature (page 164).

6. Home/Task Manager Key provides quick access back

to the Home (Idle) screen.

䡲 Press and release to exit the current screen or

application and launch the Home screen.

䡲 Press and hold to launch the Task Manager

screen.

7. Voicemail Key allows you to quickly access your

voicemail. Press and hold this key for two seconds to automatically dial your voicemail’s phone number.

8. Function Key allows you to quickly launch

predefined applications or activate specific functionality. This feature is activated by pressing and holding the key in conjunction with other specified keys.

9. Plus Code Dialing Key automatically dials the

international access code for the country in which you are located (for instance, 011 for international calls placed from the United States).

10. Space/Silent Mode Key adds either a space to a text

entry or activates the device’s silent mode.

䡲 Press briefly to insert a blank character space into

a message.

䡲 Press and hold to put your device in silent mode.

11. Messaging Key allows you to either access either the

SMS Inbox or Message Composer.

䡲 Press briefly to access the SMS (Text) message

Inbox.

䡲 Press and hold to launch the Text Message

Composer (for new messages).

12. Microphone allows other callers to hear you clearly

when you are speaking to them.

13. Camera Key lets you access the Camera preview

where you can either take pictures or shoot videos.

14 . Keypad allows you to enter numbers, letters, and

characters using a full keypad interface that has the same layout as a computer keyboard. Press and hold keys 2–99 for speed dialing.

15. Back/Clear Key deletes characters from the display

while in text entry mode. When in a menu, press

to return to the previous menu. This key also allows you to return to the previous screen in a Sprint Vision session.

16. End Key lets you end a call, or return to standby

mode. While in the main menu, it returns the device to standby mode and cancels your input. When you receive an incoming call, press to enter silent mode and mute the ringer.

17. Right Sof tkey lets you select softkey actions or menu

items corresponding to the bottom right line on the display screen. For example, when you receive an incoming call, you would press Ignore (right softkey) to reject the call and route it to your voicemail.

18. Navigation Key scrolls through the device’s onscreen

menus and options.

19. Mirror displays your reflection while taking a picture

or shooting video.

Section 2A. Device Basics 15

Device Basics

20.

Thumbwheel lets you navigate through menu

options (for example, when using the Quick Launcher [page 18] or within your Contacts list.)

䡲 Press briefly to either select an option or execute

the selected application.

䡲 Press and hold to display the Quick Launcher

screen (as shown on page 27).

21. Battery Cover covers and secures the internal

battery and the SIM card.

22. Camera Lens, as part of the built-in camera, lets you

take pictures and videos.

23. External Speaker allows you to hear the other caller

and the different ring tones or sounds offered by your device.

24. Power/Accessory Interface Connector lets you connect

a power cable and optional accessories such as a USB cable or wired headset for convenient handsfree conversations.

CAUTION! Inserting an accessory into the incorrect jack may damage the device.

16 Section 2A. Device Basics

25. Volume Key allows you to adjust the audio volume

in standby mode or adjust the voice volume during a call. The volume key can also be used to scroll up or down to navigate through the different menu options.

26. Power Button , located at the top of the device,

lets you both access a Quick List of functions and power the device on and off (as shown on page 23).

䡲 Press and release to access the Quick List screen

where you can access the device Ringer profiles and the Wireless Manager, and lock the device or turn it off.

䡲 Press and hold to shut down the device or turn

the device back on.

27. microSD Slot lets you use the microSD card to

expand the memory of your device. (See “Using Your Device’s microSD Card and Adapter” on page 99.)

28. Back-Clear/Camera Access Key lets you not only

clear an entry and return to a previous menu, but also activate the camera and video mode to take pictures and videos. This button is also userconfigurable. (See “Device Customization” on page 56.)

䡲 Press briefly to either clear an entry or go back to

a previously active menu.

䡲 Press and hold to launch the camera mode and

access the Pictures menu and either take pictures or shoot videos.

Viewing the Display Screen

Your device’s display screen provides information about your device’s status and options. The display can be divided into five main areas

䡲 Status Icons: indicate your device’s current status. 䡲 Home screen: shows items such as device

numbers, menu icons, and other listings. (For more information see page 43.)

● Recently Used Apps.: provides an icon list of

recently accessed/used applications or features. This list becomes updated with each consecutive application or feature which is accessed/used.

● Recently Used Apps.: displays the nearest

upcoming event in your calendar. Select it and press to access your Today Calendar.

● Message Access: provides quick access to the

three different message types: SMS (text messages) and Email.

● Taskbar/Softkey: provides access to Windows

Mobile features such as the Start menu and Contacts.

Section 2A. Device Basics 17

Device Basics

Status Icons

Home

Tas kba r/ Sof tke y

Quick Launcher

Recently Used

(Task Manager, Calendar, Alarm, and Edit Menu)

Screen

Upcoming Events

Message Access

Apps.

䡲 Quick Launcher: appears as a scrollable list at the

far right of the screen when the thumbwheel is pressed and held for more than three seconds.

18 Section 2A. Device Basics

This list identifies the symbols you’ll see on your device’s display screen:

shows your current signal strength. (The more lines you have, the stronger your signal.)

indicates the wireless feature has been turned off. Your device is in Flight mode and your cellular radio is turned off.

indicates there is no service available and your phone is searching for a network.

indicates your phone is in a roaming area.

indicates a Sprint Power Vision call is in progress and provides its signal strength. (The icon is animated while a Data Call session is active.)

indicates there are no data sessions active.

indicates the 1xRTT high speed data transfer protocol is currently in use.

indicates your device has high speed data

EvEv

OFF

AUTO

service (Ev-Do protocol), which is required for video streaming and downloads.

indicates the Voice Command feature is active and awaiting a verbal command.

indicates a Voice call is in progress and provides its signal strength.

indicates you missed a call.

indicates the speakerphone is enabled.

indicates you have new text messages.

indicates you have voicemail messages. (Press and hold

indicates you have new email messages.

indicates your device’s location feature is on.

indicates your device’s location feature is off.

indicates the device has not detected an internal GSM SIM card.

to call your voicemail box.)

indicates ringer volume is set to vibrate.

indicates Silence All mode is enabled. The ringer for the selected profile is set to Off.

indicates your device is operating in TTY mode.

indicates the camera is enabled.

indicates the camcorder is enabled.

indicates the self-timer function is enabled.

indicates the shooting mode.

indicates the white balance has been set to automatic.

indicates the white balance has been set to daylight.

indicates the white balance has been set to cloudy.

indicates the white balance has been set to tungsten.

Device Basics

Section 2A. Device Basics 19

indicates the white balance has been set to

HELP

fluorescent.

indicates the effects mode.

launches the shortcut key screen for both camera and camcorder mode.

launches the options menu for both the camera and camcorder.

indicates battery charge level (icon shown is full).

indicates battery charge level (icon shown fully discharged and device will power down.)

indicates battery is being charged.

indicates that Bluetooth and enabled.

20 Section 2A. Device Basics

technology is active

Using Softkeys

Softkeys are special keys whose functions are determined by the currently active dialog, menu, or page. The current function for these keys is displayed above them on the screen. Your device has a left ( ) and a right softkey ( ).

Using the End Key

The key can function differently depending on your current task, location, and the length of the press.

䊳 In Idle mode, while in a menu or page:

䡲 A brief press takes you back to the Home Screen 䡲 A longer press locks the device.

While in a voice call:

䡲 A brief press hangs up the current call. 䡲 A longer press locks the device.

䊳 While in a data call:

䡲 A brief press puts the device into a dormant

mode. (A second press will end the data call.)

䡲 A longer press locks the device.

Completing a Hard Reset of the Device

WARNING

This reset will delete any installed applications or personal information saved to the device. Contacts stored on the SIM card will not be deleted.

1. Remove the storage card from the device, if one is

present.

A hard reset will erase the cipher key used for

Note

encrypting data on the microSD card. Please ensure that all personal data stored on this card is backed up to a computer so that it can later be transferred back to the memory card.

2. With phone powered off:

䡲 Press and hold both the left and right softkeys. 䡲 While both softkeys are held down, press and

hold until the unit powers on.

3. As the device begins to power on, release both

softkeys.

Once the phone powers on, you should see an

Note

onscreen alert message (a white screen with blue text). If you do not see this screen, let the device power up normally, turn it off again, and then repeat steps 2 and

Section 2A. Device Basics 21

Device Basics

Immediately after the alert screen appears, press the left softkey.

Important

You have only five seconds to press the left softkey. Otherwise, the device will start up normally and the reset will be unsuccessful.

5. If the reset was successful, the device displays a

pop-up message stating the device is currently reformatting. This process can take several minutes. Allow the process to finish without interruption.

6. When the device has finished resetting, follow the

Windows Mobile setup instructions displayed on the screen. See “Initial Setup” on page 3.

Features of Your Device

The Samsung ACETM is lightweight, easy-to-use, and reliable, and it offers many features and service options. This list previews some of those features and provides page numbers where you can find out more:

22 Section 2A. Device Basics

䢇 Digital dual-band capability allows you to make and

receive calls while on the Sprint National Network and to roam on other 1900 and 800 MHz digital networks where Sprint has implemented roaming agreements (page 68).

䢇 Included GSM SIM card allows you to expand your

calling options using either CDMA or GSM technology. This card comes preinstalled in your device but it must be activated prior to its initial use (page 171).

䢇 Windows Mobile

this device into a portable computer that can use Microsoft

6 comes preinstalled and converts

applications such as Outlook®. (For more information, please see the Set Up Your Email guide included with your device.)

䢇 Access to the Sprint Software Store where you can

purchase not only Windows-based applications, but also Games, Ringers, and additional Screen Savers (page 160).

䢇 The Samsung ACE

uses ActiveSync® 4.5 to keep your computer and your device synchronized (page 138).

䢇 Sprint TV (page 161) lets you enjoy live and

streaming video and audio on your device.

䢇 Sprint Power Vision (page 66) lets you get exciting

On Demand media content through your device.

䢇 SMS Text Messaging (page 154) provides quick and

convenient messaging capabilities.

䢇 Sprint Voice Command lets you dial device numbers

by speaking a name or a device number (page 164).

䢇 Your Contacts list can be stored onto either your

Phone or internal SIM card (page 76).

䢇 The built-in Calendar offers several personal

information management features to help you manage your busy lifestyle (page 84).

䢇 The Location feature works in connection with

available location-based services (page 48).

䢇 The keypad lets you quickly type messages with one

keypress per letter (page 36).

䢇 Speed dial lets you dial device numbers with one or

two keypresses (page 35).

䢇 The Internet Sharing feature lets you use your device

as a modem to connect your computer to the Internet anywhere on the Sprint National Network (page 137).

Sprint Power Vision – Your device and service provide

Note

access to the Sprint Mobile Broadband Network and its enhanced data services, including Sprint TV, fast Web access, downloadable games, ringers, and applications, and more.

Turning Your Device On and Off

Turning Your Device On

1. Press , located at the

top of the device.

Once your device is on, it may display “Searching for Service.” When your device finds a signal, it automatically enters standby mode – the device’s idle state. At this point, you are ready to begin making and receiving calls.

Section 2A. Device Basics 23

Device Basics

After five seconds of inactivity, the Power Save mode is activated.

In Power Save mode, your device searches for a signal periodically without your intervention.

Using Your Device’s Battery and Charger

The Power Save feature conserves your battery power

Note

when you are in an area where there is no signal.

Turning Your Device Off

䊳 Press and hold for two seconds until you see

the powering down animation on the display screen.

Your screen remains blank while your device is off (unless the battery is charging).

24 Section 2A. Device Basics

WARNING

These batteries and accessories can be found at Sprint Stores or through Samsung order. They’re also available at

Use only Sprint-approved or Samsungapproved batteries and chargers with your device. Failure to use a Sprint-approved or Samsung approved battery and charger may increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage.

; or call 1-866-343-1114 to

www.sprint.com.

Battery Capacity

Your device is equipped with a Lithium Ion (Li-Ion) battery. It allows you to recharge your battery before it is fully drained. A fully charged battery provides up to 4.3 hours of continuous digital talk time.

When the battery reaches 5% of its capacity, the battery icon ( ) blinks. When there are approximately two minutes of talk time left, the device sounds an audible alert and then turns off.

Long backlight settings, searching for service, vibrate

Note

mode, browser use, and other variables may reduce the battery’s talk and standby times.

Watch your device’s battery level indicator and charge

Tip

the battery before it runs out of power.

Installing the Battery

䊳 See “Setting Up Your Device” on page 2.

Removing the Battery

1. Make sure the power is off so that you don’t lose

any stored numbers or messages.

2. Press down on the upper end of the battery

compartment cover (just above the embossed Samsung logo), slide the cover off, and remove the battery from the device.

WARNING

Do not handle a damaged or leaking Li-Ion battery as you can be burned.

Charging the Battery

Charge your battery as soon as possible so you can begin using your device.

Keeping track of your battery’s charge is important. If your battery level becomes too low, your device automatically turns off, and you will lose any information you were just working on.

Section 2A. Device Basics 25

Device Basics

For a quick check of your device’s battery level, glance

Correct

Incorrect

at the battery charge indicator located in the upperright corner of your device’s display screen. If the battery charge is getting too low, the battery icon ( )blinks and the device sounds a warning tone.

Always use a Sprint-approved or Samsung-approved desktop charger, travel charger, or vehicle power adapter to charge your battery. Included in the packaging is a non-charging USB cable used for data transfer.

Maximizing Battery Life

Fully charge your battery after the initial setup process. For optimal battery life, we recommend an initial charge between four to six hours to obtain a full charge.

To improve performance:

Close any unused applications via the Task Manager.

1. From the Home screen, press Start (left softkey) >

Accessories > Task Manager.

2. Select an application from the list and press Stop

(left softkey).

26 Section 2A. Device Basics

Using the Charger

䊳 Plug the flat end of the charger into the device’s

power/accessory interface connector and the other end into an electrical outlet.

With the Sprint-approved Li-Ion battery, you can recharge the battery before it becomes completely run down.

Navigating Through Device Menus

The navigation key on your device lets you scroll through menus quickly and easily. The scroll bar at the right of the menu keeps track of your position in the menu at all times.

To navigate through a menu, one option is to press the navigation key up or down. If you are in a first-level menu, such as menu by pressing or to the previous menu by pressing .

A second navigation option is to use the thumbwheel located on the right side of the device. While in a list, the thumbwheel can be used to quickly scroll through available options.

For a diagram of your device’s menu, please see “Your Device’s Menu” on page ii.

Settings, you may navigate to the next

Selecting Menu Items

As you navigate through a menu, options are highlighted. Select any numbered option by pressing the corresponding number on the device’s keypad. You may also select an item by highlighting it and pressing

For example, if you want to adjust a device setting:

1. Press Start (left softkey) to access the main menu.

2. Select Settings, and then select Sounds by pressing

or by highlighting it (using either the navigation

key or thumbwheel) and pressing

For the purposes of this guide, these steps condense

Note

into “Press

Start > Settings > Sounds.”

Backing Up Within a Menu

To go to the previous menu:

䊳 Press .

To return to standby mode:

䊳 Press .

Section 2A. Device Basics 27

Device Basics

Displaying Your Phone Number

䊳 Press Start > Settings > More... > More...> Phone

Information. (Your phone number and other

information about your device will be displayed.)

Making and Answering Calls

Making Calls

Placing a call from your device is as easy as making a call from any landline device. Enter the number, press

, and you’re on your way to clear calls.

1. Make sure your device is on.

2. Enter a phone number from standby mode. (If you

make a mistake while dialing, press to erase the numbers.)

3. Press . (To make a call when you are roaming

and Call Guard is enabled, select press . See “Setting Your Device’s Roam Mode” on page 69.)

4. Press when you are finished.

28 Section 2A. Device Basics

Roam Call and

To redial your last outgoing call, press TALK () twice.

Tip

When making calls off the Sprint National Network, always dial using 11 digits (1 + area code + phone number).

You can also place calls from your device by using Sprint Voice Command (page 164), speed dialing numbers from your Contacts (page 35), and using your Call History listings (page 74).

Dialing Options

When you enter numbers in standby mode, you will see a variety of dialing options displayed as softkeys on the device’s display screen.

To initiate an option, press the corresponding softkey.

䢇 Save: Enter a seven-digit or ten-digit number (phone

number and area code) and press save the phone number in your Contacts. (See “Saving a Phone Number” on page 34.)

Save () to

䢇 Menu: Accessed by pressing Menu (), provides

you with the following options:

䡲 Open: Allows you to display information specific to

the current caller (if they have been previously entered into the Contacts list).

䡲 Send Text Message: Allows you to send a text

message to the currently entered (or selected) number.

䡲 View: Allows you to filter your onscreen list of

numbers by one of three criteria: Calls and Contacts, All Calls, or Speed Dial.

● The Speed Dial filter allows you to enter a

number (1-99) and then display any speed dial entries which match the specified speed dial location. Press to dial the speed dial number. (See “Assigning Speed Dial Numbers” on page 77.)

To speed dial a phone number from standby mode,

Tip

press and hold the speed dial number. If the speed dial number is two digits, enter the first digit, and then press and hold the second digit. (For information on setting up speed dial numbers, see “Assigning Speed Dial Numbers” on page 77.) (This feature will not work when you are roaming off the Sprint National Network; when roaming you must dial using eleven digits [1 + the area code + the seven-digit phone number.])

Answering Calls

1. Make sure your device is on. (If your device is off,

incoming calls go to voicemail.)

2. Press to answer an incoming call.

– or –

Press Answer (left softkey). (Depending on your settings, you may also answer incoming calls by pressing any number key. See “Call Options” on page 48. for more information.)

Section 2A. Device Basics 29

Device Basics

Your device notifies you of incoming calls in the following ways:

䢇 The device rings or vibrates. 䢇 The indicator light flashes. 䢇 The backlight illuminates. 䢇 The screen displays an incoming call message

screen.

If the incoming call is from a number stored in your Contacts, the associated name is displayed. If the incoming caller is not stored in your Contacts list, only the phone number is displayed. The caller’s assigned image may also be displayed, if available.

For all incoming calls, the following options are displayed. To select an option, press the corresponding softkey.

䢇 Answer to answer the

incoming call. (This is the same as pressing .)

䢇 Ignore to send the call to your voicemail box. (This is

the same as pressing .)

30 Section 2A. Device Basics

When your device is off, calls go directly to voicemail.

Note

Ending a Call

䊳 Press .

Using Call History

When you place, accept, or miss a call, a record of the call is saved in the Call History list. When you view the numbers in this list, an icon to the left of the number indicates the call type:

Dialed: Indicates all outgoing calls

made from your device.

Missed: Indicates any missed calls.

Received: Indicates any received

calls that were answered.

For more detailed information about the Call History, see “Call History” on page 71.

Making Calls from Call History

1. Press Start > Call History.

2. Use either the navigation key or thumbwheel to

scroll through the available list.

The previous two steps can be shortened by pressing

Tip

from the Home screen to display a list of recent

calls.

3. Highlight the number and press .

Missed Call Notification

When an incoming call is not answered, the missed call icon ( ) is displayed at the top of your screen.

To display a missed call entry from the ‘Frequently used’ menu:

1. Use the thumbwheel to scroll through the list of

frequently used applications.

2. With the missed call menu displayed, either press

or press and release the thumbwheel to

display the Call History list.

To display a missed call entry from standby mode:

1. Press Start > Call History > Menu > Filter > Missed Calls.

2. Select the missed call entry you wish to view. (To

call that number, press .)

Calling Emergency Numbers

You can place calls to 911 (dial ), even if your device is locked or your account is restricted.

When you place an emergency call, your device

Note

automatically enters Emergency mode and remains in this mode until you manually exit.

During an emergency call, press display your options. Select an option and press .

䢇 Speaker On to activate speaker device mode. (If you

are in speaker device mode, the option is displayed as

Speaker Off to deactivate.)

䢇 Unlock Phone to unlock your device (appears only if

the device is locked).

䢇 Close Menu to close the pop-up menu (appears only

if the device is unlocked).

Section 2A. Device Basics 31

Menu (right softkey) to

Device Basics

Press My Phone (left softkey) to display your phone

Tip

number during an emergency call.

To exit Emergency mode:

1. Press to end a 911 call.

䡲 When calling a non-emergency number, you

must select

Yes (left softkey) to exit the Emergency

call back mode.

When you are in Emergency mode, you can exit only

Note

from the Alert menu.

To inactivate the Emergency call back mode:

1. Press to end a 911 call.

2. Call a non-emergency number.

3. Read the Alert notification screen.

4. Select Yes (left softkey) to exit the Emergency call

only mode and return to normal device operation or

No (right softkey) to remain in this mode.

32 Section 2A. Device Basics

Enhanced 911 (E911) Information

This device features an embedded Global Positioning System (GPS) chip necessary for utilizing E911 emergency location services where available.

When you place an emergency 911 call, the GPS feature of your device seeks information to calculate your approximate location. Depending on several variables, including availability and access to satellite signals, it may take up to 30 seconds or more to determine and report your approximate location.

IMPORTANT

Always report your location to the 911 operator when placing an emergency call. Some

designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your device.

In-Call Options

Pressing Menu (right softkey) during a call displays a list of available in-call features. To select an option, press the corresponding keypad number or select the option and press . The following options may be available through the Options menu:

䢇 Mute/Unmute to toggle the onboard microphone’s

mute state (on/off).

䢇 Speaker On or Speaker Off to route the device’s audio

through the speaker or through the earpiece.

䊳 Select Speaker On to route the device’s audio

through the speaker. (You can adjust the speaker volume using the volume keys on the side of the device.)

䊳 Select Speaker Off to use the device’s earpiece.

WARNING

䢇 Turn Hands free On or Turn Hands free Off to toggle the

state of the Bluetooth hands free feature between on or off.

Because of higher volume levels, do not place the device near your ear during speakerphone use.

䢇 Contacts to display your Contacts list. 䢇 Save to Contact to store the current phone number as

a new entry into your Contacts list.

䢇 View Calendar to display your calendar entries. 䢇 Call History to display Call History list.

During a call, the left softkey functions as the

Mute

button. Press it to mute the device’s microphone for privacy. Press it again to

Unmute the device.

End-of-Call Options

After you receive a call from or make a call to a phone number that is not in your Contacts, the phone number and the duration of the call are displayed. Press (left softkey) to add the new number to your Contacts. (See “Saving a Phone Number” below.)

After you receive a call from or make a call to a phone number that is already in your Contacts, the entry name, phone number, and the duration of the call are displayed.

䊳 Press Menu > View Contact to view the Contacts

information for the number.

Section 2A. Device Basics 33

Save

Device Basics

The End-of-Call options are not displayed for calls

Note

identified as No ID or Restricted.

Saving a Phone Number

Your device can store up to 12 phone numbers in each of 10 Contacts entry types. Each entry’s name can contain 255 characters. Your device automatically sorts the Contacts entries alphabetically. (For more information, see “Contacts” on page 76.)

To save a number from standby mode:

1. Enter a phone number and press Save (left

softkey).

2. Select <New Contact> and press .

3. Use the keypad to enter a first and last name for

the new contact name. (You can also choose to update the number at this time.)

4. Use the navigation key to select a number type for

the new contact from one of the following entries:

䡲 Mobile 䡲 Work 䡲 Home

34 Section 2A. Device Basics

䡲 Work 2 䡲 Home 2 䡲 Company 䡲 Pag er 䡲 Car 䡲 Assistant 䡲 Radio

5. Select Save.

Finding a Phone Number

You can search Contacts entries for phone numbers that contain a specific string of numbers.

1. Enter one or more

digits in standby mode. (Only numbers matching your entry are displayed. The more numbers you enter, the more specific the search becomes.)

䡲 Although your current Contacts list is displayed in

alphabetical order, any recent numbers matching the criteria are displayed.

2. To dial the number, press .

Plus (+) Code Dialing

When placing international calls, you can use Plus Code Dialing to automatically enter the international access code for your location (for example, 011 for international calls made from the United States). This key can also be assigned, not only an International prefix such as 011, but also a Country code and City code. See “Assigning an International Country Code” on page 50.

1. Press and hold until a “+” is displayed on your

device’s display screen.

2. Dial the country code and phone number you’re

calling, and press . (The access code for international dialing will automatically be dialed, followed by the country code and phone number.)

Dialing From the Contacts List

1. Press Contacts (right softkey) to list the entries.

2. Use the thumbwheel to scroll through the list of

available contacts and select the entry you want to call.

3. Press to dial the entry’s default phone number.

– or – To dial another number assigned to the contact

entry, select the name and press , and then select a number and press .

Using Speed Dialing

You can store up to 99 numbers in your device’s speed dial memory to make contacting friends and family as easy as pressing a button or two. With this feature, you can dial speed dial entries using one keypress for locations 1–9 or two keypresses for locations 10–99.

Section 2A. Device Basics 35

Device Basics

To use One-Touch Dialing for speed dial locations 1–9:

䊳 Press and hold the appropriate key for

approximately two seconds.

䡲 If a number has been assigned to the current

number, the display confirms that the number has been dialed when it shows “Calling...”.

䡲 If an application has been assigned to the

number, the corresponding application will launch. Assigning an Application to a Speed Dial Location.

To use Two-Touch Dialing for speed dial locations 10–99:

1. Press the first digit.

2. Press and hold the second digit for approximately

two seconds. The display confirms that the number has been dialed when it shows “Calling...”.

Speed dialing is not available when you are roaming;

Note

when you are roaming off the Sprint National Network, you must always dial using eleven digits (1 + area code + number).

36 Section 2A. Device Basics

To manage all of your speed dial entries, press

Accessories > Speed Dial

䡲 See “Using Speed Dial” on page 58.

Start >

Entering Text

Selecting Characters

Your device provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using Microsoft SMS Text Messaging).

The built-in keypad supports quick and easy text input, just as you would when using a computer’s keyboard.

1. When you display a screen where you can enter

text, use the keypad to enter different character types:

The key can also be used to quickly launch up to

Note

four user-defined features or applications. See “Customizing the Function Key” on page 57.

Outlook® and

Function: Allows you to use characters

displayed at the top of the QWERTY keys. Examples: $, @, #, ?

CAPS /SHIF T: Converts the alphabetic

character into uppercase. Changes the text input mode to Upper/Lower case mode.

Symbol: Launches the Symbols page

from where you choose from an extensive list of symbols and other character sets.

Enter: Moves the insertion point to the

next line in a message.

Delete Character: Deletes the previous

character, similar to the backspace key on a computer keyboard.

2. Select one of the following character types:

䡲 Letters to enter the alphabetic characters

associated with each key on the keypad. (See page 37.)

䡲 Numbers to enter numbers by pressing the

numbers on the keypad. (See page 38.)

䡲 Symbols to enter symbols and “emoticons.” (See

page 39.)

䡲 My Text to enter preprogrammed messages.

(See page 39.)

The keypad provides dual-use keys labeled with alphabetic characters on the lower half and numbers and symbols on the upper half. Press the key corresponding to the character you want to enter.

Entering Characters

Entering Uppercase and Lowercase Letters

1. Press to make the next character uppercase.

Characters revert back to lowercase after the next character is typed.

Section 2A. Device Basics 37

Device Basics

B i l l

BILL

9:30

Press the corresponding text keys.

䡲 For example, to enter the word “Bill,” type the

keypad sequence below. If you make a mistake, press to erase a single character.

䡲 Press and hold to erase an entire word.)

䡲 To enter all uppercase characters, press

before each letter.

Entering Numbers

The keypad can be used to enter numbers, letters, and symbols. Although these keys default to text (letters), numbers can be input by using in conjunction with the correct number key.

1. Press to input the character on the top row of

the next key pressed.

2. Press the corresponding keys. (For example, to

enter “9:30,” you would use the keypad sequence below. If you make a mistake, press to erase a single character. Press and hold to erase an entire word.)

38 Section 2A. Device Basics

Entering Symbols and Preset Messages

Ted @

Symbols can be entered from the keypad (using the

key) or from the Symbols page (accessed using

the key).

To enter symbols:

1. Position the cursor where you want the symbol to

appear within your message.

2. Press and use the navigation key to highlight a

symbol. Press to insert the symbol into your message. There are multiple pages of available symbols.

䡲 Press Next (right softkey) to open the next page of

symbols.

䡲 Press Previous (left softkey) to return to the

previous page of symbols.

– or –

1. Position the cursor where you want the symbol to

appear within your message.

2. Press and then press the key for the symbol

you wish to insert.

To enter preset messages:

1. Position the cursor where you want to insert the

preset text into your message.

2. Press Menu > My Text.

3. Scroll to a preprogrammed message and press

Preset messages (My Text) make composing text

Note

messages easier by allowing you to enter predefined text, such as “Meet me at,” or a customized preset message of your own. (For more information on preset messages, please see “Using Preset Messages” on page 156.)

Device Basics

Section 2A. Device Basics 39

Section 2B

Sound Settings

Your Device’s Settings

⽧ Sound Settings ⽧ Display Settings ⽧ Power Manag ement ⽧ Location Settings ⽧ Call Options ⽧ Messaging Settings ⽧ TTY Use With Sprint Service ⽧ Device Customization ⽧ Using Speed Dial

You can customize your device to sound, look, and operate just the way you want it to. This section describes how to

change your device’s settings to best suit your needs. Take a few moments to review these options and to adjust or add settings that are right for you.

40 Section 2B. Your Device’s Settings

Ringer Types

Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages. There are five main sound categories available:

䢇 Ring Tone: assigns ring tones for incoming calls. 䢇 Notification: assigns ring tones for categories such as

new email, new text messages, new voice messages, and new instant messages.

䢇 System Sound: assigns ring tones for system

categories such as Exclamations, Questions, and Warnings.

䢇 Keypad Ton e: assigns a tone for use with keypad

presses.

䢇 Call Alert: assigns ring tones for call-specific activities

such as minute warning, connection, and signal fade.

䢇 R2VS: assigns a simulated audio effect to the sound

being routed through a connected headset.

Selecting Ringer Types for Voice Calls

Your device provides a variety of ringer options that allow you to customize your ring and volume settings. These options allow you to identify incoming calls by the ring.

1. Press Start > Settings > Sounds > Ring Tone.

2. Use your navigation key to scroll through the

available ringers. A sample ringer will sound as you highlight each option.

3. Press Done (left softkey) to assign a ringer.

Selecting Ringer Types for Message Notifications

1. Press Start > Settings > Sounds > Notification.

2. Select New e-mail, New text message, New voice

message, or New instant message.

3. Use your navigation key to scroll through the

available ringers. A sample ringer will sound as you highlight each option.

4. Press Done (left softkey) to assign a ringer.

Selecting Ringer Types for System Sounds

1. Press Start > Settings > Sounds > System Sound.

2. Select Exclamation, Question, or Warnings.

3. Use your navigation key to scroll through the

available ringers. A sample ringer will sound as you highlight each option.

4. Press Done (left softkey) to assign a ringer.

Adding a Music File to Your Ring Tones

You can also add your own supported music file to the

Ring Tone list by using ActiveSync

the device’s Sounds folder. See “Creating a Custom Ring Tone” on page 145.

to copy your file to

Selecting a Keypad Tone

Your device offers a number of options for selecting the audible tones accompanying a keypress.

1. Press Start > Settings > Sounds > Keypad Tone.

Section 2B. Your Device’s Settings 41

Settings

Use your navigation key to scroll through the available tones (default is sound as you highlight each option.

Click). A sample tone will

3. Press Done (left softkey) to assign a tone.

Call Alert Notification

Your device can alert you with an audible tone when you change service areas, once a minute during a voice call, or when a call has been connected.

1. Press Start > Settings > Sounds > Call Alert.

2. Select Minute beep, Connect tone, or Signal fade tone.

3. Select On or Off for each category and press Done

(left softkey).

Selecting an R2VS Setting

R2VS™ significantly enhances the quality of mono and stereo audio by simulating stereo sound through a connected headset, thereby creating improved dynamics and bass performance. R2VS provides panoramic three-dimensional audio that extends the sound beyond the speakers or headphones themselves. These enriching effects are especially

42 Section 2B. Your Device’s Settings

noticeable on digitally compressed audio formats such as MP3 and WMA.

To utilize this feature, your device needs to be connected to a headset via the Power/Accessory Interface Connector.

1. Press Start > Settings > Sounds > R2VS.

2. Use your navigation key to scroll through the

available stereo settings.

䡲 Choose None (Mono), 3D Sound, or M-Theater.

3. Press Done (left softkey) to assign a setting.

Assigning Sound Profiles

Using profiles, you can adjust and customize device tones for different events or environments and then apply the settings as a group. The currently selected profile is displayed in the upper-right section of the Home screen.

1. Press Start > Settings > Profiles.

2. Select Normal, Silent, Vibrate, Outdoor, or Automatic

and press

Done (left softkey).

Device Icons

Tas kba r /So f t ke y

Home

screen

Quick

Launcher

You can quickly change the profile by briefly pressing

Tip

and then releasing the want from the Quick List and press . You can quickly activate or deactivate the Silent profile by pressing and holding

key. Select the profile you

from the Home screen.

Customizing Sound Profiles

1. Press Start > Settings > Profiles.

2. Select the desired profile you want and press

Menu > Edit

3. Use the navigation key ( ) to change the

settings in each field. Available options may differ depending on the selected profile.

4. When you have finished, press Done (left softkey).

Resetting a Sound Profile to Factory Default

1. Press Start > Settings > Profiles.

2. Select the desired profile you want to revert and

press

Menu > Reset to default

3. Press Done (left softkey) complete the update.

Display Settings

Configuring the Home Screen

The Home screen is displayed on your device while in standby mode. From here, you can view important information for the day or messages at a glance. You can also quickly switch to programs you’ve recently accessed.

Section 2B. Your Device’s Settings 43

Settings

The standby mode displays the Home screen from where you can:

䢇 Access your Contacts List 䢇 Review upcoming appointments 䢇 Access unread SMS (text messages), email, and

voicemail messages.

䢇 Launch the most recently accessed programs or

change the sound profile option (top of screen)

䢇 Access the Quick Launcher using the thumbwheel to

provide access to some common features such as the Task Manager, Alarms, Calendar, and Edit menu.

The Home screen can be quickly accessed from any menu or screen by pressing . See “Viewing the Display Screen” on page 17.

䊳 Update the Home screen settings by pressing Start

> Settings > Display > Home Screen. The following

Home screen settings are available:

䡲 Home screen layout: Select the layout to be used for

the Home screen.

䡲 Color scheme: Select the color scheme to be used

for the Home screen.

44 Section 2B. Your Device’s Settings

䡲 Background image: Select an image to use as a

background image on the Home screen.

䡲 Time out: Specify the length of time the device

waits before returning the display to the Home screen if the device is not used.

Setting the Home Screen Properties

Customize your Home screen’s display appearance by selecting a new appearance and layout.

1. From standby mode, press Star t > Settings > Display >

Home Screen > Home screen layout.

2. Use the navigation key to select an option.

3. Press Done (left softkey) to store the new selection

and return to the Home Screen.

Changing the Color Scheme

Customize your device’s display appearance by selecting a color scheme to reflect your personality.

1. Press Start > Settings > Display > Home Screen > Color

scheme.

2. Use the navigation key to select an option.

3. Press Done (left softkey) to assign the color scheme

and return to the previous screen.

Changing the Display Screen Wallpaper

Choose what you see on the display screen while in standby mode. This selected image is displayed as the Home screen background image. The image can be chosen from either the default set or from a My Pictures folder.

1. Press Start > Settings > Display > Home Screen >

Background image.

If you delete the default display image, the Home

Note

screen layout may not work properly.

2. Use the navigation key to select an image. The list

is sequential and includes a listing of any stored images (both on the device and within the optional memory card).

3. Press Done (left softkey) to assign the image and

return to the previous screen.

Setting the Time-out Properties

Choose the time delay before the Home screen turns off.

1. From standby mode, press Star t > Settings > Display >

Home Screen > Time out.

2. Use the navigation key to select an option.

3. Press Done (left softkey) to assign the time-out

value and return to the previous screen.

Selecting the Start Menu Style

The Home screen provides access to the start menu using the Windows taskbar’s

1. From standby mode, press Star t > Settings > Display >

Start Menu Style.

2. Select Grid or List and press Done (left softkey).

Section 2B. Your Device’s Settings 45

Start button.

Settings

Start menu

Grid style List style

Power Management

You can conserve battery power by adjusting the timeout settings for the display and the keypad and display backlight or adjusting the display brightness. This section also provides you with an additional indication of your current main battery charge level.

46 Section 2B. Your Device’s Settings

Reviewing the Battery Charge Level

䊳 From standby mode, press Start > Settings > Power

Management.

Changing the Backlight Time-Out

Select the length of time the display backlight stays on when you do not use the device.

1. From standby mode, press Start > Settings > Power

Management > Backlight time out.

䡲 Choose Never, 5 seconds, 10 s eco nds , 15 s eco nds ,

30 seconds, or 60 seconds.

2. Press the navigation key left or right to select a new

time out setting and press

Long backlight time-out settings reduce the battery’s

Note

talk and standby times.

Done (left softkey).

Changing the Display Time-Out

Select the length of time the display stays on.

1. From standby mode, press Start > Settings > Power

Management > Display time out.

䡲 During standby, the device goes into sleep mode

after a specified period of time to conserve power. Choose

Never, 10 se con ds, 15 seco nd s, 30 seconds,

1 minute, 2 minutes, 5 minutes, or 10 min ute s.

2. Press the navigation key left or right to select a new

time-out setting and press

Done (left softkey).

Changing the Brightness

Adjust your screen’s brightness to suit your surroundings.

1. From standby mode, press Start > Settings > Power

Management > Display brightness.

䡲 Adjust the brightness level for the display.

Choose Level 1 - Level 5.

2. Press the navigation key left or right to select a new

level setting and press

Done (left softkey).

Changing the Keypad Backlight Time-Out

Select the length of time the keypad backlight stays on when you do not use the keys.

1. From standby mode, press Start > Settings > Power

Management > Keypad backlight time out.

䡲 Choose 1 second, 2 seconds, 3 seconds, 4 seconds,

5 seconds, or 10 s eco nds.

2. Press the navigation key left or right to select a new

time-out setting and press

Done (left softkey).

Restricting the Keypad Backlight Time-Out

By default, the keypad backlight time-out is enabled all the time. With this setting you can restrict the time of day that the keypad backlight time-out will be enabled. For example, if you were planning a day at the beach (when you would not need the keypad backlight), you could disable the backlight time-out for that period.

1. From standby mode, press Start > Settings > Power

Management > Keypad backlight on.

Section 2B. Your Device’s Settings 47

Settings

Choose Any time (default) or Custom time. If you wish to set a custom time, enter new start and end times using the 24-hour time format (0000 - 2400), and press

Done (left softkey). The backlight will be

enabled only during the start and end time that you have set.

Location Settings

Your device is equipped with a Location feature for use in connection with location-based services.

The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except 911.

Turning Location on will allow the network to detect

Note

your position using GPS technology, making some Sprint applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.

48 Section 2B. Your Device’s Settings

To enable your device’s Location feature:

1. From standby mode, press Start > Settings > More...

> More... > Other Settings > Location.

(The Location

disclaimer will be displayed.)

2. Read the disclaimer and press OK (left softkey).

3. Select Locat ion on or 911 c all s on ly and press Done

(left softkey).

When the Location feature is on, your device’s standby screen will display the icon. When Location is set to 911 calls only, the icon will be displayed. In this instance, the location feature is only enabled while in a 911 call so that emergency personnel can locate you during an emergency.

Call Options

You can customize settings related to call functions. Although your current phone number is displayed, it cannot be changed in this menu. Call options allow you to change the following settings:

䢇 Any key answer to set up how you answer incoming

calls.

䢇 Auto answer to answer incoming calls automatically

with the optional hands-free car kit or earphone.

䢇 Voice mail number to set up the call-in number for your

assigned voicemail server.

The voicemail number is automatically set when you

Note

receive your device. You should not need to change it unless otherwise instructed by Sprint.

䢇 International code to set up a standard international

long distance prefix.

To access the Call Options menu:

䊳 From standby mode, press Start > Settings > Call

Options.

Setting Any Key Answer

Select how to answer incoming calls on your device: whether you want to be required to press either or any number key.

When this option is enabled, you can answer incoming calls by pressing any key, except for the following:

To enable Any key answer:

1. From standby mode, press Start > Settings > Call

Options.

2. Use the navigation key to highlight the “Any key

answer” field and press to check the box.

Auto-Answer Mode

You may set your device to automatically pick up incoming calls when connected to an optional handsfree car kit or headset.

To enable or disable auto-answer mode:

1. From standby mode, press Start > Settings > Call

Options > Auto answer.

䡲 Choose Off (to disable Auto-Answer), 3 seconds,

5 seconds, or 10 s eco nds.

䡲 Assigning a time causes all calls to be

automatically answered when the device is connected to a hands-free car kit or a headset (sold separately).

2. Press the navigation key left or right to select a new

time setting and press

Section 2B. Your Device’s Settings 49

Done (left softkey).

Settings

Reviewing Your Voice mail Number

During the initial system setup, the device automatically detected and set your voicemail number. If this field is blank, you can manually enter the number obtained from Sprint Customer Service.

Although this field is editable, it is not recommended

Note

that this number be altered.

Assigning an International Country Code

You can enter a frequently used country code that will be entered when plus code dialing is used. The Plus Code Dialing Key ( ) automatically dials the international access code for the country in which you are located.

This field allows you to prepend multiple dialing codes to a number. This can be useful for long distance dialing where the international prefix, country code, and city code are already stored on the device.

50 Section 2B. Your Device’s Settings

To enable the International Country Code:

1. From standby mode, press Start > Settings > Call

Options > International code.

2. Use the keypad to enter an international country

code and press

䡲 When using Plus Code Dialing, the international

Done (left softkey).

code defaults to the code for the country you are currently in, but when a value is entered in this field, all international calls begin with this new value. This new value supersedes the default International code.

䡲 As an example, if this field contained: 01159399,

then whenever you pressed , these numbers would appear onscreen and then you would simply key in the local phone number.

3. Press Done (left softkey).

Messaging Settings

Staying connected to your friends and family has never been easier. With your device’s advanced messaging capabilities, you can send and receive many different kinds of text messages without placing a voice call. (For more information, see “Using SMS Text Messaging” on page 154.)

Messaging settings make text messaging easier by letting you decide how you would like to be notified of new messages, create a signature with each sent message, and create your own preset messages.

Accessing SMS Message Settings

1. From standby mode, press Start > Messaging.

2. Use your navigation key to select Text Messages and

press

Select (left softkey) to launch the Text

Messages menu.

3. Press Menu > Tools > Options

Configuring Message Display Settings

1. From standby mode, press Start > Messaging > Text

Messages.

2. Press Menu > Tools > Options > Display

3. Use your navigation key to make the appropriate

selections.

䡲 Show date and time in the message list places

additional date and time information into the message display.

䡲 Sort messages by provides different sorting criteria

for those messages currently in the message list:

● Choose from either: Date received, Subject,

Sender or Message type.

● Choose from either: Descending or Ascending.

䡲 After deleting or moving a message lets you set one of

the following options: Show next message, Show previous message, or Return to message list.

4. Press Done (left softkey) to update these display

settings.

Section 2B. Your Device’s Settings 51

Settings

Setting Message Sending Options

1. From standby mode, press Start > Messaging > Text

Messages.

2. Press Menu > Tools > Options > Sending

3. Use the navigation key to highlight a field:

䡲 Include copy of original message when replying to

e-mail

䡲 Save copies of sent items places a copy into the Sent

folder.

4. Press Done (left softkey) to check the box.

To access the Messaging Settings menu, you can also

Tip

Start > Messaging > Menu > Settings.

press

Adding a Customized Signature

Add a customized signature to each message you send.

1. From standby mode, press Start > Messaging > Text

Messages.

2. Press Menu > Tools > Options > Signatures

52 Section 2B. Your Device’s Settings

3. Select either Text Messages or Outlook E-mail to

assign which message category will use the configured signature.

4. Highlight the “Use signature with this account” field

and press to check the box. (If you do not wish to attach a signature to your outgoing messages, do not check the “Use signature with this account” field

5. Highlight the “Include when replying and

forwarding” field and press to check the box. (This adds the signature to your outgoing messages.)

6. Enter a signature and press Done (left softkey).

(See “Entering Text” on page 36.)

Using Preset Messages

Preset messages make sending text messages to your friends, family, and co-workers easier than ever. messages lets you quickly insert commonly used phrases into the body of a new message or a reply to a message.

My Text

To add a preset message to a text message:

1. While the message is open, position the cursor to

where you would like the preset message to go.

2. Press Menu

(right softkey)

> My Text

3. Highlight a message to insert, and press Insert (left

softkey).

To edit a preset message:

䊳 Select an existing preset message and press Menu

> Edit My Text and use the keypad to edit or replace

the message and press . (See “Entering Text” on page 36.)

To delete a preset message:

1. Select a preset message and press Menu (right

softkey)

> Edit My Text. (The entire message is

highlighted.)

2. Press and hold to delete the message.

Press

Done (left softkey) to complete the deletion, or

press

Cancel (right softkey) to cancel the deletion.

Updating Account Settings

You can request that a notification message be sent back to your device when a message has been successfully delivered and also that your callback number will be attached to the message.

1. From standby mode, press Start > Messaging > Text

Messages.

2. Press Menu > Tools > Options > Account Settings

3. Use the navigation key to highlight a field and then

press to check the box.

䡲 Request delivery notifications launches an onscreen

pop-up message to notify you if the last outgoing message was successfully delivered.

䡲 Always send callback number provides additional

information to the outgoing message by attaching the number used in the Callback number field.

4. Select the Callback number field, and if desired,

use the keypad to enter a new callback number. Press and hold to delete the previous numbers.

5. Press Done (left softkey).

Section 2B. Your Device’s Settings 53

Settings

Deleting Old Messages

Delete individual messages you have read whenever you like, or delete all old messages.

To delete read messages:

1. From standby mode, press Start > Messaging > Text

Messages.

2. Select a message from the list and press Delete

(left softkey).

3. When prompted to confirm the deletion, press Yes

(left softkey).

To empty previously deleted messages:

1. From standby mode, press Start > Messaging > Text

Messages.

2. Press Menu > Tools > Empty Deleted Items

3. When prompted to confirm the deletion, press Yes

(left softkey).

54 Section 2B. Your Device’s Settings

TTY Use With Sprint Service

A TTY (teletypewriter, also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities, to communicate by telephone.

Your device is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission. Your device and TTY device will connect via a special cable that plugs into your device's headset jack.

If this cable was not provided with your TTY device, contact your TTY device manufacturer to purchase the connector cable.

When establishing your Sprint service, please call Sprint Customer Service via the state Telecommunications Relay Service (TRS) by first dialing . Then provide the state TRS with this number:

866-727-4889.

To turn TTY Mode on or off:

1. From standby mode, press Star t > Settings > More... >

More... > Other Settings > TTY

Read the onscreen alert message and press .

3. Press the navigation key left or right to select a

setting and press

䡲 Choose from TTY OFF, TTY FULL, TTY +

Done ().

Talk(VCO), or TTY + Hear(HCO).

In TTY Mode, the device’s standby screen will display

Note

the TTY icon. If TTY mode is enabled, the audio quality of non-TTY devices connected to the headset jack may be impaired.

WARNING

911 Emergency Calling

Sprint recommends that TTY users make emergency calls by other means, including Telecommunications Relay Services (TRS), analog cellular, and landline communications . Wireless TTY calls to 911 may be corrupted when received by public safety answering points (PSAPs), rendering some communications unintelligible. The problem encountered appears related to TTY equipment or software used by PSAPs. This matter has been brought to the attention of the FCC, and the wireless industry and the PSAP community are currently working to resolve this.

Section 2B. Your Device’s Settings 55

Settings

Device Customization

Customizing the Side Back-Clear Key Settings

You can change the program assigned to the side Back-Clear key when it is pressed and held.

1. From the Home screen,

press

Start > Settings >

More...> More... > Key Settings > Side Key Settings.

䡲 Pressing and releasing

either clears an entry or takes you back to a previously active menu.

䡲 By default, pressing and holding launches the

camera mode.

2. Use your navigation key to assign a new

application and press

56 Section 2B. Your Device’s Settings

Done (left softkey).

Customizing the Message Key

You can change the Message application assigned when you press and release or press and hold the Messaging key ( ). By default:

䢇 Pressing and releasing (“short press”) lets you

access the Text Message Inbox.

䢇 Pressing and holding (“long press”) activates the Text

Message Composer (for new messages).

1. From the Home screen, press Start > Settings >

More... > More... > Key Settings > Message Key Settings.

2. Use your navigation key to assign either Tex t

Messages Inbox or Outlook Email Inbox in the ‘(Short

press)’ field.

Use your navigation key to assign either Te x t

Messages Composer or Outlook Email Composer in the

‘(Long press)’ field.

Press Done (left softkey) to store these settings and return to the previous menu.

Customizing the Function Key

While in the Home screen, pressing and holding the

key in conjunction with other specified keys can launch predefined applications or activate specific functions.

To show the list of customizable application hot keys:

1. From the Home screen, press Start > Settings >

More...> More... > Key Settings > Fn Key Settings.

2. Press Show List to both display a list of four

predefined application buttons and their currently associated application.

䡲 The W key is by default associated with the World

Clock application.

䡲 The B key by default, will launch the Bluetooth

Settings menu.

䡲 The S key is by default associated with Service

Mode.

䡲 The F key by default, will launch the Fn Key

Settings menu.

To use the Fn key:

1. From the Home screen,

press and hold for a few seconds to activate the onscreen Launch Application window. This pop-up indicates the current application assignments of the four available hot keys.

䡲 As an example, to quickly change the device’s

service mode from CDMA to GSM, press and hold , and then press (in the default setting).

To change the hot keys:

1. From the Home screen, press Start > Settings >

More...> More... > Key Settings > Fn Key Settings > Show List.

2. Select one of the four buttons from the list and

press .

3. From the Select an Item screen, use your

navigation key to choose an item and press . (This list is extensive and you should note that there are many available options.)

Section 2B. Your Device’s Settings 57

Settings

Press Done (left softkey) assigning hot keys.

Using Speed Dial

when you have finished

3. Press Menu (right softkey) > Add Speed Dial.

Assigning an Application to a Speed Dial Location

Start menu applications can be set to launch when activated by a speed dial keypress in the same way that phone numbers can be assigned to a speed dial key.

You can also assign email addresses or Web pages to

Tip

the number keys as speed dial entries.

1. From the Home screen, press Start.

2. Select a desired application from the Start menu

screen (or from available submenus), but don’t press .

58 Section 2B. Your Device’s Settings

4. Use the keypad to assign a descriptive name

within the Name field (or accept the default).

5. In the Keypad assignment field, select an available

speed dial location for the application.

Keypad numbers 0, 1, and all digits ending in 0 (10, 20,

Note

30, etc..) are reserved and cannot be overwritten. Speed dial 1 is reserved for quick access to Voicemail services.

6. Press Done (left softkey) to finish assigning the

speed dial.

To view the list of current Speed Dial assignments:

䊳 Press Start > Accessories > Speed Dial

䡲 This list displays both phone numbers and

applications that have been assigned a speed dial location (from 2 -99).

To delete a current Speed Dial assignment:

1. Press Start > Accessories > Speed Dial

2. Select a speed dial entry and press Menu (right

softkey)

> Delete.

3. Confirm the deletion by pressing Yes (left softkey)

or cancel by pressing

No (right softkey).

Configuring the Time and Date

The Date and Time settings enable you to either manually set the date, time, and time zone or to allow the device to automatically update the information over the Sprint network.

1. From the Home screen, press Start > Settings >

More... > Date and Time.

2. Select your time zone and set the current date and

time.

3. Set the Time settings and Time zone settings fields

to either

Manual or Automatic.

䡲 Manual requires the information to be updated by

the user.

䡲 Automatic obtains the time and date information

from the network.

4. Press Done (left softkey) to complete the setup

process.

Configuring the Regional Settings

This menu allows you to change the way some data is formatted and displayed on the device such as language, locale, date styles, and currency and time formats appropriate to your current location.

1. From the Home screen, press Start > Settings >

More... > More... > Regional Settings.

2. Select the fields for any categories you wish to

change and then press the navigation key left or right to change settings.

3. Press Done (left softkey) to complete the setup

process.

Section 2B. Your Device’s Settings 59

Settings

If you changed a language or locale setting, after

Note

Done you will need to turn the device off and

pressing then back on again for your changes to take effect.

To change from English to Spanish:

1. From the Home screen,

press

Start > Settings >

More... > More... > Regional Settings.

2. In the ‘Language’ field,

select

Español and press

Done (left softkey).

3. Press OK (left softkey) to

acknowledge the change in the language.

4. Press and hold for two seconds until you see

the powering down animation on the display screen.

䡲 When the device restarts, Spanish menus will be

displayed.

60 Section 2B. Your Device’s Settings

To change from Spanish to English:

䊳 Repeat steps 1 – 4, this time selecting US English in

the ‘Language’ field.

Section 2C

Accessing the Security Menu

Your Device’s Security

⽧ Accessing the Security Menu ⽧ Using Your Device’s Device Lock Feature ⽧ Using Special Numbers ⽧ Using Encryption ⽧ Managing Certificates ⽧ Resetting Your Device ⽧ Security Features for Sprint Power Vision

By using the security settings on your device, you receive peace of mind without sacrificing flexibility. This section will

familiarize you with your device’s security settings. With several options available, you can customize your device to meet your personal needs.

All of your device’s security settings are available through the Security menu.

䊳 Press Start > Settings

Using Your Device’s Device

More... > Security

Lock Feature

Locking Your Device with a Password

When your device is locked, you can only receive incoming calls or make calls to 911, Sprint Customer Service, or special numbers. (See “Using Special Numbers” on page 64.)

When you lock your device, it requires a password to return to normal operation. When a password is set up, the device can be locked immediately or configured to lock when the screen goes blank.

Section 2C. Your Device’s Security 61

Security

Press Start > Settings

More... > Security.

2. Select Device Lock and press .

3. Select “Prompt if device unused for” and press

. (Enabling this option activates the remaining

fields.)

4. Select each field and enter the required

information:

䡲 Time: select the amount of unused time (idle)

required before you are prompted for a password.

䡲 Password type: to choose from one of the following

PIN types:

● Simple PIN: must be at least four characters in

length and cannot contain a simple sequence s u c h a s 0 0 0 , 1111 , o r 1 2 3 4 .

● Strong alphanumeric: must be at least seven

characters in length and must contain at least one character from each of the following categories: uppercase/lowercase letters, numerals, symbols. Examples of strong alphanumeric passwords are

%$VH5hW.

sb?8A!3 and

62 Section 2C. Your Device’s Security

䡲 Password: use the keypad to enter the desired

password.

䡲 Confirm password: use the keypad to re-enter the

same password.

5. Press Done (left softkey) > Yes (left softkey) to store

these settings.

Unlocking Your Device Using a Password

Once the preset time has expired, the display screen will dim and the taskbar

Unlock.

Start option is replaced with

1. From standby mode, press Unlock.

2. Enter your password using the keypad.

3. Press Unlock.

Changing the Device Lock Code

1. Press Start > Settings

2. Select Device Lock and press .

3. Enter your password using the keypad.

4. Press Unlock.

More... > Security.

5. Navigate to the Password field and then to the

Confirm password field, pressing and holding in each field to delete the current password information.

6. Enter your new password within both fields and

when prompted, re-enter your new lock code.

7. Press Done (left softkey) to store the new password.

Removing the Device Lock

1. Press Start > Settings

2. Select Device Lock and press .

If you can’t recall your lock code, try using the last four

Tip

digits of your wireless phone number. If this doesn’t work, call Sprint Customer Service at (1-800-777-4681) .

3. Enter your password using the keypad.

4. Press Unlock.

More... > Security

1-800-SPRINT1

5. Select “Prompt if device unused for” and press

. (This action removes the check mark from this

option and disables the device lock feature.)

6. Press Done (left softkey) > Yes (left softkey) to store

the new settings.

Manually Locking Your Device

This manual process temporarily locks the device without the need to enter a password.

You can still receive calls, but you cannot make calls or use the keypad.

1. Press to activate the

Quick List menu. (This menu allows you to quickly turn the device off, access the Wireless Manager, lock the device, or activate sound profiles.)

Section 2C. Your Device’s Security 63

Security

Select Lock and press . (The display screen dims and the taskbar.)

– or –

䊳 Press and hold .

Unlock option now appears in the

Manually Unlocking the Device

䊳 Press Unlock (left softkey) and then immediately

press . (This removes the manual lock and allows you to fully utilize the device and all its features.)

Calling in Lock Mode

You can place calls to 911 and to your special numbers when in lock mode.

䊳 To call an emergency number, special number, or

Sprint Customer Service, enter the phone number and press

64 Section 2C. Your Device’s Security

Using Special Numbers

Special numbers are important numbers that you have designated as being “always available.” You can call and receive calls from special numbers even if your device is locked.

You can save up to three special numbers in addition to your Contacts entries (the same number may be in both directories).

To add or replace a special number:

1. Press Start > Settings

2. Select Emergency Numbers and press .

3. Select a location for your entry.

4. Enter the number and press Done (left softkey).

5. Read the Alert pop up and press Yes (left softkey)

to activate a soft reset of your phone or softkey) to cancel the operation.

There are no speed dial options associated with

Note

special numbers.

More... > Security.

No (right

Using Encryption

The encryption feature is used with files stored on the optional microSD™ card to make them readable only on your device.

To encrypt files stored on a microSD card:

1. Press Start > Settings

More... > Security.

2. Select Encryption and press .

3. Press to enable the encryption option and then

press

Done (left softkey).

Managing Certificates

You can add and delete public key certificates. Three types of certificates can be created.

To access information about different certificate types:

1. Press Start > Settings

More... > Security.

2. Select Certificates and press . From this screen,

you can manage the following certificate types:

䡲 Per sonal: Used to identify yourself to others. 䡲 Intermediate: Used to identify intermediate

certification authorities. (Intermediate certificates are issued by the trusted root certificate authority, and any SSL [secure sockets layer] certificates then issued by the intermediate certificate will inherit the trust of the trusted root.

䡲 Root: Used to identify root certification authorities.

(A root certificate is the top-most certificate of the certificate tree. All certificates below the root certificate inherit the trustworthiness of the root certificate.)

3. Select the encryption option and press to see

the certificate information.

To delete a certificate:

1. Press Start > Settings

More... > Security.

2. Select Certificates and press .

3. Select any of the three available certificates and

press to reveal a list of related certificates.

Section 2C. Your Device’s Security 65

Security

Select an entry from the list and press Menu >

Delete.

䡲 After selecting Delete, the certificate is disabled by

default.

5. Read the disclaimer and press OK (left softkey).

Resetting Your Device

䡲 After the device restarts, you may have to press

Next (right softkey) and reconfigure basic settings

such as the time and date (page 59) and the password (page 61).

Security Features for Sprint Power Vision

Resetting the device restores all the factory defaults, including the ringer types and display settings. The Contacts list, call history, scheduler, and messaging are not affected.

1. Press Start > Settings

More... > Security.

2. Select Phone Reset and press .

3. Enter the lock code and press Done (left softkey).

4. Read the disclaimer and press OK (left softkey).

䡲 The device will restart and all current data stored

on the device will be deleted. This reset process does not affect the data stored on the microSD card.

66 Section 2C. Your Device’s Security

Enabling and Disabling Data Services

You can disable Sprint Power Vision data services without turning off your device; however, you will not have access to all data services, including Web and messaging. Disabling data services will avoid any charges associated with Sprint Power Vision services. While signed out, you can still place or receive device calls, check voicemail, and use other voice services. You may enable data services again at any time.

If you are unable to make an outgoing due to a current

Note

data call in session (indicated by an “

while a data call is in progress” message), use the

Wireless Manager to turn the phone off and on again, and then press phone and enables Vision services.

Without Vision enabled, you will be unable to wirelessly sync your device to a remote email server (page 138).

Done (left softkey). This refreshes the

Unable to Vision

To enable data services:

1. Press Start > More (left softkey) > Accessories

> Menu (right softkey).

Vision

2. Select Enable Vision and press .

3. Read the disclaimer and press Yes (left softkey) to

enable the service.

(A message indicating the

progress of the activation is displayed. The Status field then displays “Vision Enabled.”)

To update your Vision information:

1. Press Start > More (left softkey) > Accessories

> Menu (right softkey) > Update Profile.

Vision

2. Read the confirmation screen and press Yes (left

softkey) to enable the service and begin the update process using your remote vision information.

Section 2C. Your Device’s Security 67

Security

Section 2D

Understanding Roaming

Roaming

⽧ Understanding Roaming ⽧ Setting Your Device’s Roam Mode

Roaming is the ability to make or receive calls when you’re off the Sprint National Network. Your new Samsung ACE

works anywhere on the Sprint National Network and allows you to roam on other 1900 and 800 MHz digital networks where we’ve implemented roaming agreements with other carriers.

This section explains how roaming works as well as special features that let you manage your roaming experience.

68 Section 2D. Roaming

Recognizing the Roaming Icon on the Display Screen

Your device’s Home screen always lets you know when you’re off the Sprint National Network. Anytime you are roaming, the device displays the roaming icon ( ) and extra charges may apply when making or receiving a call.

Remember, when you are using your device off the

Tip

Sprint National Network, always dial numbers using 11 digits (1 + area code + number).

Roaming on Other Digital Networks

When you’re roaming on digital networks, your call quality and security will be similar to the quality you receive when making calls on the Sprint National Network. However, you may not be able to access certain features, such as Sprint Power Vision, depending on the available network.

If you’re on a call when you leave the Sprint National

Note

Network, your call is dropped. If your call is dropped in an area where you think Sprint service is available, turn your device off and on again to reconnect to the network.

Checking for Voicemail Messages While Roaming

When you are roaming off the Sprint National Network, you may not receive automatic on-device notification of new voicemail messages. Callers can still leave messages, but you will need to periodically check your voicemail for new messages if you are in a roaming service area for an extended period of time.

1. Dial 1 + area code + your phone number.

2. When you hear your voicemail greeting, press

3. Enter your passcode at the prompt and follow the

voice prompts.

When you return to the Sprint National Network, voicemail notification will resume as normal.

Setting Your Device’s Roam Mode

Your device allows you to control your roaming capabilities. Your device has a way of alerting you when you are roaming off the Sprint National Network: the onscreen roaming icon. By using the menu option, you can determine which signals your device accepts, and which network you will use.

Enabling the Roaming Option

Choose from three different settings on your device to control your roaming experience.

1. Press Start > Settings > More... > Roaming.

2. Use the navigation key to select an option in the

‘Roaming option’ field and press

䡲 Automatic to seek service on the Sprint National

Network. When Sprint service is unavailable, the device searches for an alternate system.

䡲 Sprint Only to access the Nationwide Sprint PCS

Network only and prevent roaming on other networks.

Section 2D. Roaming 69

Roaming

Done (left softkey).

Roaming

䡲 Roaming Only to seek a roaming system only. The

previous setting (Sprint Only or Automatic) is restored the next time the device is turned on.

Enabling the Data Roam Guard

Depending on service availability and roaming agreements, your phone may be able to access data services while roaming on certain digital systems. You can set your phone to alert you when you are roaming off the Sprint National Network and try to use data services such as messaging.

Data Roam Guard is turned off by default on your

Note

device.

70 Sect ion 2D. R oaming

To set your Data Roam Guard notification:

1. Press Start > Settings > More... > Roaming > Data roam

guard.

2. Use the navigation key to select On in the ‘Data

roam guard’ field and press

Done (left softkey).

To use data services when Data Roam Guard is active:

䊳 When a pop-up notification appears informing you

that data roam charges may apply, select

Roam

(left softkey) to connect.

To not see this pop-up message again, set the Data

Note

roam guard to

Off.

Section 2E

Call History

⽧ Viewing History ⽧ Call History Options ⽧ Making a Call From the Call History ⽧ Saving a Phone Number From Call History ⽧ Deleting Call History Entries

The Call History keeps track of incoming calls, outgoing calls, and missed calls. This section guides you through

accessing and making the most of your Call History.

Viewing History

Call History is a list of recent phone numbers (or Contacts entries) for calls you placed, accepted, or missed. Call History makes redialing a number fast and easy.

It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list. When you view the numbers in this list, an icon to the left of the number indicates the call type:

Dialed: I n d i c a t e s a l l o u t g o i n g c a l l s

made from your device.

Received: Indicates any received

calls that were answered.

Missed: Indicates any missed

calls. These are routed to your voicemail.

Each entry contains the phone number (if it is available) and the Contacts entry name (if the phone number is in your Contacts).

Accessing Call History

1. Press Start > Call History.

2. Use either the navigation key or thumbwheel to

scroll through the available list.

Section 2E. Call History 71

Call History

The previous two steps can be shortened by pressing

Tip

from the Home screen to display a list of recent

calls.

3. Highlight the number and press .

Call History records only those calls that occur while

Note

the device is turned on. If a call is received while your device is turned off, it will not be included in the device’s Incoming or Missed call logs.

If you return a call from the voicemail menu, it will not be included in your device’s Outgoing call log.

Call History Options

Select a Call History entry and press to display the date and time of the call, the phone number (if available), and the caller’s name (if the number is already in your Contacts).

72 Section 2E. Call History

1. Access the Call History list.

2. Press Menu (right softkey) to display the following

options:

䡲 Find Contact to find a contact entry matching the

selected phone number.

䡲 Send Text Message to activate the Text Message

Composer (for a new message).

䡲 E-mail to activate the Microsoft Outlook

Composer (for a new email message).

䡲 View Timers displays the recorded time for the

following categories.

● Last call: call length for last outgoing call.

● All calls: length of all incoming and outgoing

calls since the last reset of the timers (page 73).

● Incoming calls: total time used for all incoming

calls.

● Outgoing calls: total time used for all outgoing

calls.

● Roaming calls: total time used for all roaming

calls.

● Data calls: total time used for all data

transmissions (calls).

● Last reset: shows most recent reset time.

● Lifetime calls: total combined time used for all

of the above call types.

䡲 Delete to delete the currently selected entry. 䡲 Delete List to delete all Call History entries. 䡲 Save to Contacts to save the number into your

Contacts list if it is not already stored. (See “Saving a Phone Number From Call History” on page 88.)

䡲 Filter to restrict the list of entries that appear.

You can also view the next Call History entry by

Tip

pressing the navigation key down or view the previous entry by pressing the navigation key up.

Filtering Calls in Call History

1. Press Start > Call History > Menu (right softkey) > Filter.

(This option filters the list to display only those calls meeting your selected criteria.)

2. Select an option and press .

䡲 No Filter: all calls are displayed. 䡲 Missed Calls: only calls which were not answered

are displayed.

䡲 Incoming Calls: only calls that were answered are

displayed.

䡲 Outgoing Calls: only calls that were placed are

displayed.

Resetting Timers from the Call History

1. Press Start > Call History > Menu (right softkey)> View

Timers.

2. Press Menu > Reset Timers.

3. Read the disclaimer and press Yes (left softkey).

Section 2E. Call History 73

Call History

Making a Call From the Call History

1. Press Start > Call History.

2. Select an entry (number or Contacts name) and

press .

You cannot make calls from Call History to entries

Note

identified as

Saving a Phone Number From

No ID or Restricted.

Call History

The number of Contacts that can be stored on the device is determined by the storage capacity. Each Contacts entry can store up to a total of 10 phone numbers, and each entry’s name can contain 255 characters.

1. Select a Call History entry and press Save (left

softkey).

2. Select <New Contact> and press .

74 Section 2E. Call History

3. Use the keypad to type in the new entry's first and

last name. The device’s word prediction feature may try to identify the word being typed.

4. Select a Number type from one of the following

categories (groups):

䡲 Mobile 䡲 Work 䡲 Home 䡲 Work 2 䡲 Home 2 䡲 Company 䡲 Pager 䡲 Car 䡲 Assistant 䡲 Radio

After you have saved the number, the new Contacts entry is displayed in the alphabetical listing. (See “Contacts Entry Options” on page 80.)

You cannot save phone numbers already in your

Note

Contacts or from calls identified as

Restricted.

Unknown ID or

Deleting Call History Entries

You can delete individual entries from Call History, or you can delete all entries.

Deleting individual entries in Call History:

1. Press Start > Call History.

2. Select an entry and press Menu (right softkey) >

Delete.

3. Read the disclaimer and if you are certain you

want to permanently delete the entry, press softkey).

– or –

No (right softkey) to return to the previous

Press menu.

Yes (left

Deleting all entries in Call History:

1. Press Start > Call History.

2. Press Menu (right softkey) > Delete List.

3. Read the disclaimer and if you are certain you

want to permanently delete the list of entries, press

Yes (left softkey).

– or –

No (right softkey) to return to the previous

Press menu.

Section 2E. Call History 75

Call History

Section 2F

Adding a New Contacts Entry

Contacts

⽧ Adding a New Contacts Entry ⽧ Assigning Speed Dial Numbers ⽧ Finding Contacts Entries ⽧ Contacts Entry Options ⽧ Adding a Phone Number to a Contacts Entry ⽧ Editing a Contacts Entry’s Phone Number ⽧ Editing a Contacts Entry ⽧ Deleting Contacts ⽧ Beaming a Contacts Entry ⽧ Selecting a Ringer Type for an Entry ⽧ Dialing Sprint Services

Your device’s Contacts list helps you stay in touch with family, friends, and colleagues by keeping track of all their contact information. This section explains how to use your

device’s Contacts list.

76 Section 2F. Contacts

The number of Contacts entries that can be stored on the device is determined by the storage capacity of the device. Each Contacts entry can store up to a total of 10 phone numbers, and each entry’s name can contain 255 characters.

1. Press Start > Contacts

2. Enter a name for the new entry

New

(See “Entering

Text” on page 36.)

3. Enter the phone number(s) for the entry

4. Press Done (left softkey) to store the new entry into

the Contacts list.

After you have saved the number, the new Contacts entry is displayed. (See “Contacts Entry Options” on page 80.)

ICE – In Case of Emergency

Tip

To make it easier for emergency personnel to identify important contacts, you can list your local emergency contacts using the word “ICE” at the beginning of the entry’s name within your device’s Contacts list. For example, if your mother is your primary emergency contact, list her as “ list more than one emergency contact, use “ICE1–___,” “ICE2–___,” etc.

ICE–Mom” in your Contacts list. To

Assigning Speed Dial Numbers

Your device can store up to 99 phone numbers in speed dial locations. (For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 35.) You can assign speed dial numbers when you add a new Contacts entry, when you add a new phone number to an existing entry, or when you edit an existing number.

Numbers 0, 1, and all digits ending in 0 (10, 20, 30,

Note

etc..) are reserved and cannot be overwritten. Speed dial 1 is reserved for quick access to Voicemail.

To assign a speed dial number to a new phone number:

1. Add a phone number to a new or to an existing

Contacts entry. (See “Adding a New Contacts Entry” on page 76 or “Adding a Phone Number to a Contacts Entry” on page 81.)

2. Select the new entry from the Contacts list and

press . (This opens a details screen for the selected entry.)

3. Press Menu (right softkey) > Add to Speed Dial and

press .

4. Edit the name using the keypad (if desired).

5. Select an available speed dial location (2 - 99) and

press

Done (left softkey) to complete the speed dial

assignment. (A confirmation will be displayed.)

To assign a speed dial number to an existing phone number:

1. From the Home screen, press Contacts (right

softkey).

2. Select an entry and press .

3. Select a number to assign to a speed dial location.

Section 2F. Contacts 77

Contacts

Press Menu (right softkey) > Add to Speed Dial and press .

5. Select an available speed dial location (2 - 99) and

press

Done (left softkey) to return to the details

page. (A confirmation will be displayed.)

6. Press Done (left softkey) to return to the Contacts

menu.

If you attempt to assign an already in-use speed dial

Note

location to a new phone number, a message will appear asking if you wish to replace the existing speed dial assignment. Press location to the new phone number and delete the previous speed dial assignment.

Yes (left softkey) to assign the

To review a list of previously assigned speed dial numbers:

䊳 Press Start > Accessories > Speed Dial.

78 Section 2F. Contacts

Finding Contacts Entries

There are several ways to display your Contacts entries: by name, by speed dial number, by group, and by voice dial tags. Follow the steps outlined in the sections below to display entries from the Contacts menu.

Finding Contacts by Name

1. Press Start > Contacts

– or – From the Home screen, press Contacts

(right softkey).

2. Scroll through all the entries.

– or – Enter the first letter of a name or part of a name

(such as “ave” for “Dave”). (The more letters you enter, the more your search narrows.)

3. To display the details for an entry, select it and

press .

4. To dial the entry’s default phone number, press

– or – To display additional Contacts entries, press the

navigation key up or down.

Finding Speed Dial Numbers

1. Press Start > Accessories

2. Scroll through speed dial entries. Speed dial

numbers are displayed in numeric order. – or – Enter the number of a speed dial location using

your numeric keypad.

3. To display the details of an entry, highlight it and

press .

4. To dial the entry’s default phone number, highlight

the entry from the list and press

Speed Dial

Finding Entries by Category

To make the search process easier and quicker, Contacts entries can be assigned to any or all of these categories: Business, Holiday, Personal, and Seasonal.

1. Press Start > Contacts

> Menu > Filter.

2. Select one of the available category types from the

pop-up menu and press to filter the current list of Contacts. (If your category does not appear in the list, select

䡲 All Contacts does not filter the Contacts list. 䡲 Recent displays only the most recently added

More... to display additional entries.)

contacts.

䡲 No Categories displays only entries that

are not

assigned to a category.

䡲 Business displays only entries that are assigned to

the Business category

䡲 Holiday displays only entries that are assigned to

the Holiday category

䡲 Per sonal displays only entries that are assigned to

the Personal category

Section 2F. Contacts 79

Contacts

䡲 Seasonal displays only entries that are assigned to

the Seasonal category

䡲 More.. allows you to select multiple category types

and display only those entries that match.

3. To display an entry within the category, select it

and press .

4. To dial the entry’s default phone number, press

– or – To dial another listed number:

䡲 Select the entry and press . 䡲 Select the phone number and press Call (left

softkey).

Contacts Entry Options

To access a Contacts entry’s options, display the entry and press

䢇 Edit to add to or change a Contacts entry. (See

80 Section 2F. Contacts

Menu. Select an option and press .

“Adding a New Contacts Entry” on page 76 or “Adding a Phone Number to a Contacts Entry” on page 81.)

䢇 Send Contact [Beam] to send and receive information

wirelessly between your device and one or more other Bluetooth-enabled devices.

䢇 Copy Contact to create a duplicate of a Contacts entry. 䢇 Delete Contact to permanently delete an entry. 䢇 Copy All to transfer a copy of all current contacts to

either the phone or to the SIM card, depending on

the original storage location of the selected entry.

䢇 View By to filter how entries are displayed (either by

Name [alphabetical] or by Company [user-defined]).

䢇 Delete All to permanently delete all Contacts entries

from either the device or the SIM card.

䢇 Filter to display only entries matching a selected filter

category. See “Finding Entries by Category” on page 79.

You can view the next entry by pressing the navigation

Tip

key right or view the previous entry by pressing the navigation key left.

Adding a Phone Number to a Contacts Entry

1. Display a Contacts entry. (See “Finding Contacts

Entries” on page 78.)

2. Press Menu > Edit.

3. Select a phone number field, use the keypad to

enter the new number, and press softkey).

Done (left

Editing a Contacts Entry’s Phone Number

4. Re-enter or edit the number and press Done (left

softkey).

Editing a Contacts Entry

1. Display a Contacts entry.

2. Press Menu > Edit.

3. Select the information you wish to edit (Name,

Group, Ringer, etc.), and use to clear one

character at a time, or press and hold the entire entry.

4. Add or edit the information using the keypad and

press

Done (left softkey) to save the changes.

to erase

Contacts

1. Display a Contacts entry. (See “Finding Contacts

Entries” on page 78.)

2. Press Menu > Edit.

3. Select a number to change, and use to clear

one digit at a time, or press and hold the entire number.

to erase

Deleting Contacts

You can quickly delete either individual entries or all entries from your Contacts list. Contacts can be deleted from either the device or from the SIM card.

To delete a single contact:

1. Press Start > Contacts.

Section 2F. Contacts 81

Select a contact from the list and press Menu >

Delete Contact.

3. Read the disclaimer and press Yes (left softkey).

To delete all contacts:

1. Press Start > Contacts > Menu > Delete All.

2. Select either Phone or SIM and press .

3. Read the disclaimer and press Yes (left softkey).

Receiving a Beamed Contact:

When receiving a Contacts entry from another device, you will be prompted to accept the beamed information.

䊳 Read the confirmation screen and press Done (left

softkey).

Selecting a Ringer Type for an Entry

Beaming a Contacts Entry

You can send and receive information wirelessly between your phone and up to two Bluetooth-enabled devices. The following example shows how to transmit Contacts entry information to another phone.

1. Display a Contacts entry.

2. Press Menu > Send Contact > Beam. (The device will

search for other Bluetooth-enabled devices in range.)

3. Select a Bluetooth device from the list and press

Beam. (The recipient will then be given the option

to agree to save the contact to their own device.)

82 Section 2F. Contacts

Assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ringer Types” on page 40.)

1. Display a Contacts entry.

2. Press Menu > Edit.

3. Scroll through available ringers in the Custom ring

tone field. (When you highlight a ringer type, a sample ringer will sound.)

4. Select a ringer and press Done (left softkey) to save

the new ringer type.

Dialing Sprint Services

To dial a service from standby mode using your keypad:

1. Dial the appropriate service number:

䡲 Account Info. –

䡲 Customer Ser vice –

䡲 Sprint 411 –

䡲 Sprint Operator –

䡲 Voice Command – (press and hold)

2. Press to place the call.

Contacts

Section 2F. Contacts 83

Section 2G

Calendar and Tools

⽧ Using Your Device’s Calendar ⽧ Using Your Device’s Alarm Clock ⽧ Using Your Device’s Notepad ⽧ Using Tasks ⽧ Managing Voice Memos ⽧ Using the Tip Calculator ⽧ Using the Calculator ⽧ Using the Smart Converter ⽧ Using the Stopwatch ⽧ Using the World Clock ⽧ Using the File Viewer

Your device is equipped with several personal information management features that help you manage your busy lifestyle.

84 Section 2G. Calendar and Tools

This section shows you how to use these features to turn your device into a time management planner that helps you keep up with your contacts, schedules, and commitments.

Using Your Device’s Calendar

Adding an Event to the Calendar

Your Calendar helps organize your time and reminds you of important events.

1. Press Start > Organizer

2. Press the left softkey to cycle between Week, Month,

and

Agenda (full-screen table calendar view).

Press the navigation key up or down to scroll through

Tip

the Calendar.

3. Select the day to which you would like to add an

event and press

Appointment.

4. Enter a title for the event in the Subject field using

the keypad. (See “Entering Text” on page 36.)

Calendar

Menu (right softkey) > New

Samsung SPH-I325 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Table of Contents

Introduction

Your Device’s Menu

Getting Started

Setting Up Your Device

Setting Up Service

Initial Setup

Getting Started With Sprint Service

Determining Whether Your Device Is Activated

Unlocking Your Device

Using your Device to Call

Setting Up Your Voicemail

Sprint Account Passwords

Account Password

Voicemail Password

Sprint Power Vision Password

Getting Help

Visit www.sprint.com

Reaching Sprint Customer Service

Receiving Automated Billing Information

Sprint 411

Sprint Operator Services

Your Device

Device Basics

Your Device Features

Key Functions

Viewing the Display Screen

Using Softkeys

Using the End Key

Completing a Hard Reset of the Device

Features of Your Device

Turning Your Device On and Off

Turning Your Device On

Using Your Device’s Battery and Charger

Turning Your Device Off

Battery Capacity

Installing the Battery

Removing the Battery

Charging the Battery

Maximizing Battery Life

Using the Charger

Navigating Through Device Menus

Selecting Menu Items

Backing Up Within a Menu

Displaying Your Phone Number

Making and Answering Calls

Making Calls

Dialing Options

Answering Calls

Ending a Call

Using Call History

Making Calls from Call History

Missed Call Notification

Calling Emergency Numbers

Enhanced 911 (E911) Information

In-Call Options

End-of-Call Options

Saving a Phone Number

Finding a Phone Number

Plus (+) Code Dialing

Dialing From the Contacts List

Using Speed Dialing

Entering Text

Selecting Characters

Entering Characters

Entering Uppercase and Lowercase Letters

Entering Numbers

Entering Symbols and Preset Messages

Sound Settings

Your Device’s Settings

Ringer Types

Selecting Ringer Types for Voice Calls

Selecting Ringer Types for Message Notifications

Selecting Ringer Types for System Sounds

Adding a Music File to Your Ring Tones

Selecting a Keypad Tone