Copyright 2001 Sprint Spectrum L.P. All rights reserved. No reproduction in whole or in part
without prior written approval. Sprint, Sprint PCS, Sprint PCS Phone, Sprint PCS Wireless
Web, and the diamond logo are trademarks of Sprint Communications Company L.P. Palm
OS, Graffiti, HotSync, iMessenger and Palm.Net are registered trademarks of Palm, Inc. Palm,
the Palm logo, MyPalm, the HotSync Logo, Palm Powered and the Palm Powered logo are
trademarks of Palm, Inc. All other trademarks are property of their respective owners.
Welcome to Sprint PCS
Sprint PCS built the only all-digital, all-PCS nationwide network from the
ground up for clearer calls, serving more than 300 major metropolitan
areas and all major airports. We built our network to give you what we
believe you really want from a wireless phone: clear sound, private
conversations and time-saving features.
And Sprint Personal Communications Services® can do something even
more far-reaching – simplify your life. Our advanced technology is designed
to grow with your communications needs so that one day, you’ll be able to
rely entirely on your phone to stay connected.
This guide will introduce you to our technology and your new
Sprint PCS Phone through simple, easy-to-follow instructions. Since you’re
probably anxious to start using your phone, we encourage you to
immediately flip to Section One – Getting Started With Sprint PCS Service.
This section provides all the information you need to quickly set up your
voicemail and much more. It also contains information on how to contact
Sprint PCS should you have questions about service, want to purchase
additional products or services, or just check your account balance.
Thank you for choosing Sprint PCS.
Understanding
Roaming
Getting StartedUnderstanding
Roaming
Getting StartedGetting Started
1
Understanding
Roaming
Getting StartedUnderstanding
Roaming
Getting StartedGetting Started
2
Table of Contents
1. Getting to Know Your Sprint PCS Phone..........................................9
our phone is packed with features that simplify your life and expand your
ability to stay connected to the people and information that are important to
you. We know that you’re anxious to start using it, so this section will give you a
quick introduction to your new phone. The easy-to-follow instructions will guide
you through the basics of the most common features of your phone and you’ll be on
your way to using it in no time.
Don’t forget the other chapters in this guide. They’re filled with information about
the capabilities and benefits of your new Sprint PCS Phone. They include detailed
step-by-step instructions that familiarize you with all the features and explain how
to customize your phone to meet your specific needs.
Getting to Know Your Sprint PCS Phone9
1
Wireless Web
Ge
Ge
Getting to Know Your
Sprint PCS Phone
Sprint PCS
Getting Started
Congratulations on the purchase of your phone (Model SPHI300). Your phone combines two leading technologies, to give
you the convenience of a digital phone and a personal digital
assistant (PDA). Although the products have been effectively
combined, they can be used together or completely
independent of one another. The Sprint PCS Phone™ uses the
popular Palm® Operating System, thus allowing you to
install and run over 10,000 Palm Computing applications.
Custom e-mail and web applications have been included and
especially designed to work with the Sprint PCS Phone™. The
HotSync® application can be used to synchronize a desktop
machine with the Sprint PCS Phone™. This phone is
lightweight, easy-to-use, reliable and offers many significant
features:
䊳 A Complete Palm Powered™ color screen.
䊳 PocketMirror integrates with the Palm Desktop™
software. This allows you to keep a desktop PC and the
handheld computer synchronized with the same
information.
䊳 Voice Dialing allows you to use speech recognition to call
someone saved in your address book.
䊳 Dual-band capability provides access to other PCS CDMA
and analog cellular networks where Sprint PCS has
implemented roaming agreements.
䊳 Sprint PCS Wireless Web Browser provides access to the
wireless Internet in digital mode.
䊳 Sprint PCS Wireless Web Mail and Sprint PCS Wireless Web
Short Mail provide quick and convenient text messaging
capabilities.
䊳 Sprint PCS Voice Command lets you dial phone numbers
by speaking someone’s name or the digits in their phone
number.
Section 1
10Getting to Know Your Sprint PCS Phone
䊳 Voice Memo allows you to record personal memos to
remind yourself of important events.
䊳 Voice activated dialing with 20 locations.
Understanding This User Guide
This user guide introduces you to our technology and all the
advantages of your new Sprint PCS Phone – through easy-tofollow instructions.
䊳 Sections break down categories of information to
progressively take you all the way from learning the basics
to using the most advanced phone features.
䊳 Tips highlight special shortcuts and timely reminders to
help you make the most of your new phone.
䊳 The Index helps you find specific information quickly.
We know your time is valuable, that’s why we’ve designed this
guide to be used in a building block format or in stand-alone
sections. You’ll get the most out of your new Sprint PCS phone
if you read each section. However, if you’d like to learn about a
specific feature, you can locate the specific section using the
colored tabs.
Ge
Getting to Know
Your SprintPCS
1
Ge1
Sprint PCS Phone
Getting to Know Your
Getting to Know Your Sprint PCS Phone11
Wireless Web
Ge
Sprint PCS
Front View of Phone
Getting to Know Your Sprint PCS Phone12
䊳 Stylus: The stylus acts like a mouse to navigate the Sprint
PCS Phone. Use it to touch the screen to select the desired
function.
䊳 IR (Infrared) Port: The Infrared port allows you to beam
information between two Sprint PCS I300 Phone devices.
Each device must have IR capabilities.
䊳 LED Indicator: Displays when the phone is turned on.
䊳 LCD Indicator: Displays the Time, Signal, Date, and
Battery strength. Flashes to indicate an incoming call or
message. Also lights up when the phone is turned On.
䊳 Phone Power Button: Turns the Phone ON or OFF.
䊳 Handheld Computer Power Button: Turns the power
ON or OFF if pressed once. Also acts as the contrast
adjustment on the Sprint PCS Phone when pressed and
held.
䊳 Voice Memo: Record a personal memo on the Sprint PCS
Phone. Up to ten memos can be stored on the phone.
䊳 Sprint PCS Phone Screen: This is a touch sensitive
screen designed to be used with the provided stylus. Use
only the stylus, since other objects may scratch the screen.
䊳 Scroll Buttons: Allows you to move up or down on the
Sprint PCS Phone screen to display all of the icons or
information available.
䊳 Application Buttons: These buttons automatically
activate the Date Book, Address Book, To Do List, and
Calculator when pressed.
䊳 Volume Keys:Adjust the ringer volume in Standby mode
and the voice volume during a call. Can also be used to
scroll up/down in the Address Book.
䊳 Ear-Microphone Jack: Provides connection for an
optional hands free headset.
䊳 Reset Button: The reset button should not be used under
normal conditions. If the device stops responding or locks
up, it can be reset by pressing this button. The top of the
stylus un-screws to reveal a reset tool that is used to push
into the tiny opening on the back of the phone.
Ge
Getting to Know
Your SprintPCS
1
Ge1
Sprint PCS Phone
Sprint PCS
Wireless Web
Getting to Know Your
Getting to Know Your Sprint PCS Phone13
Ge
䊳 Serial Connector: Connects the Sprint PCS Phone™ to
the desktop cradle/charger allowing the information
between the desktop computer and Sprint PCS Phone to
synchronize.
Connecting the Cradle
Your package includes a cradle for charging the battery and
synchronizing the Sprint PCS Phone™ with a desktop or
laptop computer. If you do not plan to synchronize the Sprint
PCS Phone™ with a desktop computer, the cradle can be used
as a battery charger only. When the cradle is plugged into a
wall outlet, the battery charger is fully functional.
Connecting the Cradle to a Desktop Computer
1. Turn OFF the desktop computer.
2. Connect the serial cable to com 1 or com 2 on the desktop
computer.
3. Turn the desktop computer back ON.
PC System Requirements for the Palm Desktop Software
To install and operate correctly, the Palm software must have
the following resources:
䊳 Windows® 95, 98, ME, or NT
䊳 IBM-Compatible 486 or higher computer
䊳 8 MB of RAM minimum, 16 MB recommended
䊳 20 MB of disk space
䊳 VGA or better monitor
䊳 CD-ROM drive
Section 1
14Getting to Know Your Sprint PCS Phone
䊳 Mouse
䊳 One available serial port
Macintosh System Requirements for the Palm Desktop
Software
䊳 Any Palm™ handheld and HotSync® cradle
䊳 Apple Macintosh or compatible with a Power PC processor
䊳 Mac OS 7.5.3 or later
䊳 One open serial (printer/modem) port (USB-equipped
computers, such as the Apple iMac, require the Palm
Connect USB adapter.)
䊳 Macintosh Serial Adapter (included with original Palm
MacPac kit, or available for purchase)
䊳 20 MB free hard drive space
䊳 6 MB free RAM
Installing the Palm Desktop Software
1. Insert the Palm Desktop CD into the desktop computer.
2. Follow the instructions on the screen when the Install
application starts.
Note: If the Install application does not start, you can start it
manually through Windows Explorer.
3. Select Yes or No to install the Mail application. If you
select Yes, the application configures the mail program on
the desktop to synchronize with the Sprint PCS Phone
mail application.
Macintosh
System
Ge
Your SprintPCS
Note:
You can connect your
phone to a Macintosh
using the PalmConnect®
Serial Kit or PalmConnect
USB kit (sold separately).
1
System
Ge1
Getting to Know
Macintosh
Getting to Know Your
Sprint PCS Phone
Getting to Know Your Sprint PCS Phone15
Wireless Web
Ge
Sprint PCS
4. Select com1 or com 2, depending on which port the cradle
is connected.
5. When the application is finished installing, restart your
machine.
Installing and Charging the Battery
Battery Capacity
Your phone is equipped with a Lithium Ion (LiIon) battery. It
allows you to recharge your battery before it is fully drained.
The battery provides approximately four hours of continuous
digital talk time (90 minutes in analog) or approximately 100
hours of continuous digital standby time (20 hours in
analog).
When the battery reaches 5% of its capacity, the battery icon
blinks. When there are approximately two minutes of talk time
left, the phone sounds an audible alert every 30 seconds and
then powers down.
Section 1
16Getting to Know Your Sprint PCS Phone
Installing the Battery
Your phone comes with a LiIon battery. To install the battery:
1. Hold the Sprint PCS Phone™ so that the back portion is
exposed.
2. Line up the battery in the slot and slide upwards until it
locks into place.
Removing the Battery
To remove your battery for charging or for another reason,
follow these easy steps:
Battery
Ge
Your SprintPCS
Battery
Installing the
Getting to Know
1
Installing the
Ge1
Sprint PCS Phone
Getting to Know Your
1. Make sure the power is off so you don’t lose any stored
numbers or messages.
2. Press the release button on the back of the phone.
3. Slide the battery downward to release from the phone.
Getting to Know Your Sprint PCS Phone17
Wireless Web
Ge
Sprint PCS
WARNING :
Using the wrong battery
charger could cause
damage to your phone
and void the warranty.
Charging the Battery
Your phone comes with a rechargeable battery. You should
charge the battery upon opening the package. Being aware of
your battery’s charge is important. If your battery level
becomes too low, your phone automatically shuts off and you
may lose information. For a quick check of your phone’s
battery level, glance at the battery charge indicator located on
the top display screen.
There is also an internal backup battery that saves all the
settings in the phone when the regular battery is discharged.
An internal backup battery needs to be charged initially for 24
hours. To make sure the internal battery is charged, do not
disconnect the main battery from the phone for 24 hours.
Section 1
18Getting to Know Your Sprint PCS Phone
Remaining Battery Power
The remaining battery power is indicated on the screen using
a battery icon in the upper right corner of the display.
Remaining
Battery Power
Note: A battery indicator also exists on the LCD screen. Both
indicators are a correct measurement of battery power.
If the battery charge gets too low, the battery icon blinks
and the phone sounds a warning tone. The phone may power
down to conserve battery power to maintain the phone’s data.
Note: Always use the Sprint PCS-approved desktop charger,
travel charger or cigarette lighter adapter to charge your
battery.
Using the Desktop Charger
To use the desktop charger provided with your phone:
1. Plug the AC adapter into the electrical outlet.
2. Remove the serial connector rubber plug from the bottom
of your phone.
3. Insert the phone (with the battery installed) into the slot.
䊳 A red light on the charger lets you know the battery is
charging.
䊳 A green light lets you know that the battery is at least 90
percent charged.
䊳 A yellow light indicates that the battery is operating at a
temperature that is too high or low, or that the charger is
not plugged in correctly. Please check the charger and the
battery.
It generally takes about three hours to fully recharge a
completely discharged battery. With the Sprint PCS-approved
Lilon battery, it is okay to recharge the battery before it
becomes completely run down.
Note:
If your battery drains and
you have the unit in an
uncharged state for an
extended period of time,
you can lose all of the
stored data.
Ge
Your SprintPCS
1
Battery Power
Wireless Web
Ge
Getting to Know
Remaining
Ge1
Getting to Know Your
Sprint PCS Phone
Sprint PCS
Getting to Know Your Sprint PCS Phone19
Turning Your Phone ON and OFF
Turning your Phone ON
Choose from the following options:
Tip :
The Power Save feature
helps to conserve your
battery power when you
are in an area where there
is no signal.
1. To turn your phone on, press for approximately two
seconds.
䊳 Once your phone is ON, it displays “No Service Area” while
your phone looks for a signal. When your phone finds a
signal, it automatically enters Standby mode – the
phone’s idle state. At this point, you're ready to begin
making and receiving calls.
䊳 If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone returns to Standby
mode.
䊳 Your phone searches for a signal periodically without
your intervention. You can also initiate a search for
Sprint PCS Service by pressing any key (when your phone
is turned ON).
Or:
1. From the Applications menu, tap.
2. Tap Yes to turn the phone ON.
Or:
1. From the Phone OFF screen, tap the car.
2. Tap Yes to turn the phone ON.
Section 1
20Getting to Know Your Sprint PCS Phone
Turning your Phone OFF
Choose from the following options:
1. Press for two seconds.
䊳 Your screen displays the Phone OFF screen. The handheld
computer portion of the phone can still be used when the
phone is OFF.
Phone OFF
Ge
Turning your
Or:
1. On the phone main screen, tap.
2. Select Options and tap “Phone Off”.
Calibration/Initial Setup Screens
When the phone is first turned ON, the calibration screen is
displayed. By calibrating the unit, the internal circuitry is
synchronized with the touch screen. Remove the stylus and
follow the directions displayed on the screen to calibrate.
Note: You can calibrate the screen at anytime by launching
the Preferences program and selecting Digitizer under the
options menu.
Setup
When the handheld computer is initially turned ON, the Setup
screens are displayed. Follow the steps listed below to complete
the initial setup:
1. The Calibration Setup screen is displayed automatically.
2. Remove the stylus and tap the screen anywhere to begin.
Your SprintPCS
1
Phone OFF
Ge1
Wireless Web
Getting to Know
Turning your
Getting to Know Your
Sprint PCS Phone
Sprint PCS
Getting to Know Your Sprint PCS Phone21
Ge
Note: To prevent scratches, always use the stylus. Other
devices may cause scratches to the surface of your phone.
3. A cross hatch is displayed on the screen. Tap the
center of the cross hatch.
4. A new cross hatch is displayed in the upper left corner. Tap
the center.
5. Repeat these steps until there are no more cross hatch
marks displayed.
6. The Time Setup screen is displayed once the device has
been calibrated.
7. Set the desired time by tapping on the box. Tap OK to close
the Time screen.
8. Tap the Date box to set the correct day, month, and year.
Tap Today to close the Date screen.
9. Tap Done to exit the Setup screens.
Note: For more information on date and time setup, see
“General” on page 79.
Adjusting Screen Contrast
The contrast allows the screen to display better in different
lighting conditions. To display the setting to adjust the
contrast:
1. Press and hold thebutton.
2. The contrast adjustment screen is displayed. Move the
slider back and forth to the desired setting.
3. Tap to exit.
Section 1
22Getting to Know Your Sprint PCS Phone
Icons on the Phone Screen
Signal Strength Indicator - The more bars that are
displayed, the better the signal strength. The maximum
number of bars is five.
Setup
No Service - No service means that the phone cannot
receive a signal from the system. You cannot make or
receive calls with the no service indicator on.
InUse indicator - This icon is displayed when a call is
connected.
Data Call Indicator - This icon is displayed when a
data call is connected.
Roaming Indicator - If the phone is outside of the
Sprint PCS Service area, the roaming icon is displayed.
Analog Indicator - The phone is operating in analog
mode. No digital service is available or being used.
New Message Indicator - When you have a new
Sprint PCS Wireless Web message, page, or voicemail
messages, tap the message icon to listen or view the new
messages.
Web Alert Indicator - When you have a new web alert
message, tap the web alert icon to view the new message
through the Sprint PCS Wireless Web.
Ge
Getting to Know
Your SprintPCS
1
Setup
Ge1
Sprint PCS Phone
Getting to Know Your
Battery Level Indicator - The power level of the
battery is displayed
Getting to Know Your Sprint PCS Phone23
Wireless Web
Ge
Sprint PCS
Vibrate Indicator - The phone is set to vibrate
mode. The ringer does not sound for incoming calls
or message alerts, instead the phone vibrates.
Phone OFF Indicator - This means that the phone’s
power is OFF. If you tap the icon, the Power ON
prompt is displayed. Tap
Applications Launcher - Launches the handheld
Yes to turn the phone ON.
computer application screen. Tap this to exit any
screen and return to the main screen.
Menu Launcher - Launches the menu bar
associated with each screen being displayed. Tap the
Menu Launcher to display a drop down list of the
available options.
Address Book - Tap this icon to gain instant access
to the Address Book.
Outgoing Call History - Displays the last 20 entries
of outgoing calls.
Key Lock/Unlock - Activates or deactivates the key
lock option. This keeps any keys from being pressed
accidentally.
Speed Dial - Tap this icon to gain instant access to
the Speed Dial screen.
Section 1
24Getting to Know Your Sprint PCS Phone
Icons on the Phone LCD
There is also a LCD display located on the top of the phone. It
is a small LCD panel that displays:
Icons on the
Phone LCD
䊳 Caller ID
䊳 Time & Date
䊳 Signal Strength
䊳 Battery Level
䊳 Call in Progress
䊳 Roaming
䊳 Sprint PCS Wireless Web Message, Page, or
Voicemail Alert
䊳 Web Alert
䊳 Vibrate Mode
Ge
Getting to Know
Your SprintPCS
1
Icons on the
Phone LCD
Ge1
Sprint PCS Phone
Getting to Know Your
Getting to Know Your Sprint PCS Phone25
Wireless Web
Ge
Sprint PCS
Section 1
26Getting to Know Your Sprint PCS Phone
2
T
Getting to Know the Handheld
Computer
In this Section
䊳 What is a Handheld Computer
䊳 Tapping and Typing
䊳 Opening an Application
䊳 Customizing your Handheld Computer
䊳 Troubleshooting
䊳 Resetting Your Handheld
he handheld computer allows you to simplify your life by organizing scheduled
events and keeping important information easily accessible in the palm of your
hand. By using this phone, you get the best of both worlds. You can communicate
and have a personal assistant all in one unit.
Ge
the Handheld
2
Ge
Handheld Computer
Getting to Know
Getting to Know the
Getting to Know the Handheld Computer27
2
Wireless Web
Ge
Sprint PCS
Loading...
+ 277 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.