All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung T elecommunications America (STA), LLC
Headquarters:Customer Care Center:
1301 E. Lookout Drive1000 Klein St.
Richardson, TX 75082Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Printed in Korea)
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
a303_AB03.03_CB_020607_F3
Table of Contents
Section 1: Getting Started ...........................................................................7
Understanding this User Manual ...............................................................................8
Activating Your Device ..............................................................................................8
Charging the Battery ...............................................................................................10
Setting Up Your Voice Mail ......................................................................................11
Section 2: Understanding Your Device ......................................................12
Features of Your Device ..........................................................................................12
Closed View of Your Device .....................................................................................13
Open View of Your Device .......................................................................................15
This section explains how to start using your device by activating your service, setting up your
voice mail, or getting an understanding of how this manual is put together.
Section 1: Getting Started7
Understanding this User Manual
The chapters of this guide generally follow the same order as the menus and sub-menus
in your device. A robust index for quick reference to most features begins on page 172.
Also included is important safety information that you should know before using your
device. Most of this information is near the back of the guide, beginning on page 150.
Notes and tips
Throughout this guide are icons and text that are set apart from the rest. These are
intended to point out important information, quick methods for activating features, to
define terms, and more. The definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or sub menu.
• Tips: Provide quick or innovative methods for performing functions related to the subject at
hand.
• Fast Facts: Are like snippets from a glossary. Fast facts provide definitions in context and
proximity to the menu or feature in question.
• Important: Points out important information about the current feature that could affect
performance, or even damage your device.
Activating Your Device
Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
device supports.
Install the Battery
Note: Your device comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter.
Important: Y ou must fully charge the battery the first time you use your device, otherwise you could damage the battery.
You can use your device while the battery is charging, but the battery will take longer to recharge.
1. Slide the battery into the compartment so that the
tabs on the end align with the slots at the top of the
phone.(1) Press the battery down until it clicks into
place.(2)
8
Activating Your Device
2. Replace the battery cover (1) and slide it toward
the bottom of the phone (2) until the cover clicks
into place.
3. Make sure that the battery is properly installed
before switching on the phone.
Turn Your Device On
1. Open the slide on your device.
2. Press and hold the key for two or more seconds.
Note: As with any other radio-transmitting device, do not touch the antenna (located at the top of the battery
compartment) while using your device as this can affect call quality and can cause the device to operate at a higher
power level than is necessary.
3. The device begins searching for a network signal.
4. Once the device finds a signal, the current time displays on the upper, right side of
the icon bar.
5. You’re now ready to place and receive calls.
Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon () appears at the top of the
device’s display. If you cannot place or receive calls, try later when service is available, or at another location.
Turn Your Device Off
䡲 Press and hold the key for two or more seconds. Your device powers off.
Note: If your device is on and you press for less than one second, the device will not power off. This prevents your
device from being turned off accidentally.
Remove the Battery
Important! You must unplug the Travel Adapter (if it is connected) before removing the battery from the device during
charging to avoid damage.
If necessary, switch off the phone by holding down the key until the power turns off.
1. Remove the battery cover by sliding the battery cover in the direction of the arrow.
2. Carefully lift the battery cover away from the
bottom of the phone.
Section 1: Getting Started9
Lift (1) the bottom of the battery and remove it (2).
3.
Charging the Battery
Your device is powered by a rechargeable standard Li-Ion
battery. Only use Samsung-approved charging devices and
batteries. Samsung accessories are designed to maximize
battery life. Using other accessories may invalidate your
warranty and may cause damage.
Use the Travel Adapter
The travel adapter included with your device is a
convenient, light-weight charger that rapidly charges your
device from any 120/220 VAC outlet.
1. Plug the large end of the Travel Adapter into a
standard 120 VAC or 220 VAC wall outlet.
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper configuration
for the power outlet. Use of the wrong adapter could damage your device and void your warranty.
2. Insert the smaller end of the Travel Adapter into the charger/accessory connector at
the lower right side of your device.
Note: The following illustration shows the correct and incorrect method for connecting the charger. Verify the arrow on
the adapter is showing and pointing to the device for a correct connection. If it is not, damage to the accessory port will
occur therefore voiding the device’s warranty.
Incorrect
Correct
Note: With the device turned OFF, a discharged battery recharges fully in approximately 3 hours.
10
Setting Up Your Voice Mail
Low battery indicator
The battery indicator () in the upper-right corner of the display indicates power level.
Monitor the battery strength and ensure your battery is adequately charged.
• Four bars () indicate a full charge.
• An empty battery icon () indicates a near empty battery.
• A blinking empty battery icon () and a tone sounding indicate you have two to three
minutes before the battery is too low to operate the device.
If you continue to use your device without charging its battery, the device shuts down.
Setting Up Your Voice Mail
Voice mail allows callers to leave voice messages, which can be retrieved any time.
Note: Once your voice mail account has been set up, you can use the Voice Mail folder (under the Message menu) to
view details of voice messages in your voice mail box.
@
.
1. In idle mode, press and hold the key or dial your own mobile number to dial
voice mail.
2. Follow the prompts in the new user tutorial to setup your mail box.
Listen to voice mail
1. In idle mode, press and hold the key or dial your own mobile number to dial
voice mail.
2. At the voice prompt, enter your passcode and follow the instructions.
?
@
.
?
Section 1: Getting Started11
Section 2: Understanding Your Device
Topics Covered
• Features of Your Device
• Closed View of Your Device
• Open View of Your Device
• Command Keys
• Understanding the Display Screen
• Your Device’s Modes
This section outlines some key features of your device. It also displays the screen and the
icons that are displayed when the device is in use.
Features of Your Device
• Domestic and international voice and text messaging service (available on participating
networks).
• High speed data (CDMA 2000 1x Technology)
• High speed data (EVDO 1x Technology)
• Global Positioning (GPS) Technology
• Personal Information Management (PIM) Functions
• MMS Messaging
• Text Messaging
• Email Messaging
• 1.3 Megapixel Camera with Flash and Camcorder function
• Speakerphone
• Bluetooth® Wireless Technology **
** The Samsung A303 supports the wireless handsfree profile, and Bluetooth OBEX profiles for
Bluetooth® wireless technology.
12
Closed View of Your Device
Closed View of Your Device
10. Earpiece/Speaker
1. Volume Keys
2. Display
3. Play/Pause Key
4. Navigation Key
5. External Touchpad
9. End/Power Key
8. Camera Key
7. Key
6. Power-Accessory
Connector
Features
Volume Keys — With the device closed, turns on the external display backlight
1.
when held down.
2. Display — Indicates the status of your device, including status icons, message
indicators, signal strength, and so on. Shows time and date.
3. Play/Pause Key — Used to unlock the External Touchpad and to control play of
music files.
4. Navigation Key — Lets you scroll through the device menu options.
5. External Touchpad — Allows you to navigate through device menu options.
6. Power/Accessory Connector — Used to plug in the charging accessories and also
connect any available accessory cables to your device. Lets you plug in an optional
headset for safe, convenient, hands-free conversations and for listening to music.
7. Key — Pressing when navigating through a menu accepts the highlighted choice
in a menu.
8. Camera Key — In standby mode, with the slider open, pressing this key displays the
SNAP menu. Pressing and holding this key launches the camera.
In camera mode, takes photos or starts and ends video clip recording.
Section 2: Understanding Your Device13
End/Power Key — Ends a call. If you press and hold the End/Power key, the power
9.
goes On or Off. When you receive an incoming call, pressing this key sends the call
to voicemail.
10. Earpiece/Speaker — Lets you hear the other caller.
Note: The touch keys [Left () and Right () soft touch keys, the Send () touch key, and the Back/Clear ()
touch key] are only active when unlocked. The touch keys lock automatically when you slide the phone. To unlock the
touchpad, press and hold the Play/Pause key until the ‘Key Lock State Unlock key input?’ appears in the display.
Caution: The External Touchpad responds to a light touch. Using excessive force when pressing touch keys may
damage the touchpad.
14
Open View of Your Device
1. Earpiece/Speaker
2. Display
Open View of Your Device
3. Volume Keys
4. Left Soft Touch Key
5. Navigation Key
6. Play/Pause Key
7. Send Touch Key
8. Special Function Keys
16. End/Power Key
15. Right Soft Touch Key
14. Key
13. Camera Key
12. Back/Clear Touch Key
11. Alpha-numeric Keys
10. Power Accessory
Connector
9. Microphone
Features
1. Earpiece/Speaker — Lets you hear the other caller.
2. Display — Indicates the status of your device, including status icons, message
indicators, signal strength, and so on. Shows menus, calls, and messages.
3. Volume Keys — During a call, adjusts the earpiece volume.
In standby mode with the device open, adjusts the ring volume.
Section 2: Understanding Your Device15
Left Soft Touch Key — When you press and hold this key, Used to navigate through
4.
menus and applications and to select the choice available in the Left Soft touch key
option.
When receiving a call with the device open or closed, pressing and holding the Left
Soft Touch Key mutes the ringer.
Note: The touch keys [Left () and Right () soft touch keys, the Send () touch key, and the Back/Clear ()
touch key] are only active when unlocked. If the touch keys are locked (‘Touch Buttons Locked’ appears in the display),
press the Play/Pause key to unlock the touchpad.
Caution: The External Touchpad responds to a light touch. Using excessive force when pressing touch keys may
damage the touchpad.
5. Navigation Key — Lets you scroll through the device menu options.
6. Play/Pause Key — Used to unlock the External Touchpad and to control play of
music files.
7. Send Touch Key — Lets you place or receive a call. In standby mode, press this
touch key once to access the recent call log.
8. Special Function Keys — Enter special characters. Performs various functions.
9. Microphone — Lets the other caller hear you clearly when you are speaking to
them.
10. Power/Accessory Connector — Used to plug in the charging accessories and also
connect any available accessory cables to your device. Lets you plug in an optional
headset for safe, convenient, hands-free conversations and for listening to music.
11. Alpha-numeric Keys — Use these keys to enter numbers, letters, and characters.
12. Back/Clear Touch Key — Deletes characters from the display when you are in text
entry mode. Press this touch key to return to the previous menu or screen when
navigating features on your device.
13. Camera Key — In standby mode, pressing this key displays the SNAP menu.
Pressing and holding this key launches the camera.
In camera mode, takes photos or starts and ends video clip recording.
14. Key — Pres sing when navigating through a menu accepts the highlighted choice
in a menu.
15. Right Soft Touch Key — Used to navigate through menus and applications and to
select the choice available in the Right Soft touch key option. When you receive an
incoming call, press and hold to ignore the call and send it to voicemail. Returns your
device to standby mode.
16. End/Power Key — Ends a call. If you press and hold the End/Power key, the power
goes On or Off. Returns your device to standby mode.
16
Rear
1. Self Portrait Mirror
2. Camera Lens
Open View of Your Device
9. Flash
3. End/Power Key
4. Camera Key
5. Power-Accessory
Connector
8. Volume Keys
7. Play/Pause Key
6. Rear Speaker
Features
Self Portrait Mirror — Helps you center the camera lens for self portraits. Strike a
1.
pose and look good in pictures of yourself.
2. Camera Lens — The lens of your built-in camera.
3. End/Power Key — Ends a call. If you press and hold the End/Power key, the power
goes On or Off.
4. Camera Key — In standby mode, pressing this key displays the SNAP menu.
Pressing and holding this key launches the camera.
In camera mode, takes photos or starts and ends video clip recording.
5. Power/Accessory Connector — Used to plug in charging accessories and also to
connect other available accessory cables to your device.
Section 2: Understanding Your Device17
Rear Speaker — Lets you hear music, ringtones, alert tones, and other callers.
6.
7. Play/Pause Key — Used to unlock the External Touchpad and to control play of
music files.
8. Volume Keys — During a call, adjusts the earpiece volume.
In standby mode with the device open, adjusts the ring volume.
9. Flash — Used with the built-in camera to take photos and videos in low light.
Command Keys
Functions for the soft touch keys are defined by what appears above each in the display.
There are two soft touch keys, the left soft touch key (
(
).
Note: The touch keys [Left () and Right () soft touch keys, the Send () touch key, and the Back/Clear ()
touch key] are only active when unlocked. The touch keys lock automatically when you slide the phone. To unlock the
touchpad, press and hold the Play/Pause key until the ‘Key Lock State Unlock key input?’ appears in the display.
Caution: The External Touchpad responds to a light touch. Using excessive force when pressing touch keys may
damage the touchpad.
) and the right soft touch key
Left Soft Touch Key
Some functions of the left soft touch key are as follows.
• In standby mode, press the MENU (left) soft touch key () to open the main menu.
• When the left soft touch key function is Edit, press the Edit (left) soft touch key () to edit a
Contact.
• When the left soft touch key function is Menu, press the Menu (left) soft touch key () and
a pop-up menu appears.
Right Soft Touch Key
Some functions of the right soft touch key are as follows.
• In standby mode, press the CONTACTS (right) soft touch key () to open the Contacts List
screen.
• When the right soft touch key function is Check, press the Check (right) soft touch key ()
to select an item in a list to be acted on by a selected function, such as Delete.
Helio Key
• In a menu, press the Helio key () to accept the highlighted selection.
• In camera mode, press the Helio key () to take a photo.
• When the Helio key function is Edit, press the Edit (Helio) key ( ) to edit a Draft message.
18
Command Keys
Back/Clear Key
Back/Clear key () is used to erase or clear numbers, text, or symbols from the
The
display. You can also use the key to return to a previous menu or to return to standby
mode from any menu.
1. If you enter an incorrect character, briefly press to backspace (and delete) the
character.
2. To erase the entire sentence, press and hold .
3. To back up one menu level, briefly press .
4. To return to standby mode, repeatedly press until you return to standby mode.
End Key
1. In standby mode, press and hold the End key () to turn your device off.
2. Briefly press once to disconnect a call.
3. Press to return to standby mode from any menu, or to cancel the last input.
4. With your device turned off, press to turn your device on.
Send Touch Key
The Send touch key (
) is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
1. Press once to answer calls.
2. Enter a number and briefly press to make a call.
3. Briefly press in standby mode to display a list of recent calls to and from your
device.
4. Press twice in standby mode to call the most recent number.
5. Press to pick up a waiting call. Press again to switch back to the other call.
Navigation Key
Use the directional keys on the navigation key (
) to browse menus, sub-menus,
and lists. Each key also acts as a shortcut to launch applications.
Camera Key
In standby mode, momentarily press the Camera key () — located on the right side of
your device — to display the SNAP menu.
In standby mode, press and hold the Camera key () to activate the camera built into
your device.
@
.
With the camera or camcorder active, press the key to select from among the camera
?
and camcorder modes.
Section 2: Understanding Your Device19
Play/Pause key
When playing music, press the Play/Pause key () — located on the left side of your
device — to begin or to pause the music.
Understanding the Display Screen
1. The top line of your device’s main display contains
icons that indicate network status, battery power,
signal strength, connection type, and more.
2. The center portion of the main display shows
information such as call progress information,
messages, and photos.
3. The bottom line of the main display shows current soft
touch key functions. The sample screen shows that
pressing the Left soft touch key () will show the
main menu. Pressing the Right soft touch key () will show the Contacts List.
Display Screen Icons
1
2
3
Signal strength — Always appears when your device is on and
indicates the current signal strength. More lines indicate higher signal
strength.
In-Use indicator — Indicates a call in progress. When dialing a number,
this icon flashes until the call connects.
No service indicator — Indicates your device cannot find a signal
because you’re outside a service area. Y ou cannot make or receive calls.
Wait for a signal or move into an open area to try and find a signal. The
no service indicator always appears when you turn on your device and
disappears once service is located.
Roam — Roaming occurs when you use your device outside your home
area. While roaming, a wireless provider other than yours handles your
call, so the service rate for the call may be higher than those made
within your home area. Please refer to information from your Wireless
Provider on roaming rates.
New Message — Indicates that you’ve received a new text, page, or
web alert message. You’re also notified by a visual and audible alert.
Text Message — Indicates that you’ve received a new text message.
20
Understanding the Display Screen
Voicemail — Indicates that you’ve received a new voice message.
Battery strength — Indicates the battery charge level. The more black
bars, the greater the charge. When the battery becomes very low, a
flashing empty battery icon displays and the device sounds an audible
alert, which indicates your device is about to shut down.
Alarm clock — The alarm clock is set.
Ring Only — Ring Vibration has been set to Ring Only using the
Settings menu. When you receive a call, the device rings.
Vibrate — Ring Vibration has been set to Vibrate using the Settings
menu. When you receive a call, the device vibrates but does not ring.
Light Only — Ring Vibration has been set to Light Only using the
Settings menu.
Vibrate then Ring — Ring Vibration has been set to Vibrate then Ring
using the Settings menu. When you receive a call, the device vibrates
then it rings.
Ring and Vibrate — Ring Vibration has been set to Ringand Vibrate
using the Settings menu. When you receive a call, the device vibrates
and rings.
Silent mode — Indicates your device is in Silent mode. Ringer is
silenced for all alerts, incoming calls, and incoming messages. The
device alerts you of incoming calls, alerts, and messages by v ibration
and a message in the screen.
Section 2: Understanding Your Device21
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn of situations such as low
memory. Dialogue boxes and their definitions are outlined below.
• Choice
• Example: “Save message?”
• Reconfirm
• Example: “Erase all messages?”
• Performing
• Example: “SENDING...” “Connecting...”
• Completed
• Example: “Message saved in drafts”
• Information
• Example: “New Message”
• Error
• Example: “No External Memory”
• Warning
• Example: “Battery Low,” “Memory Full!”
Backlights
Backlights illuminate the internal and external displays and the keypad. When you press
any key or open the device, the backlights come on. They go off when no keys are pressed
within a period of time set in the Backlight menu.
Note: During a phone call, the display backlights dim and turn off after ten seconds to conserve battery power,
regardless of the Backlight setting.
See “Backlight” on page 79 for more information.
22
Your Device’s Modes
Y our Device’s Modes
Call Answer Mode
You can select how you wish to answer a call.
@
.
1. In standby mode, press the MENU (left) soft touch key (), then press (for
CUSTOMIZE), (for Settings), (for Call), and for Answer Call On.
TUV
GHI
@
.
?
?
The following call answer options appear in the display:
• Slide Open — Sliding the device open or pressing answers a call.
• Open + Anykey — Sliding the device open or pressing any key except the key or
key answers a call.
• Send Key Only — Only pressing answers a call.
2. Use the navigation keys to highlight an option.
3. Press the key to select the method for answering calls.
Input mode
Input mode determines how you enter text, numbers and symbols. While at any text entry
screen, repeatedly press the right soft touch key () to toggle between the text input
modes: T9 Word, 123, Symbol, KOR, and Abc. (See “Section 5: Entering T ext” on page 48
for more information.)
Lock Mode
When the device is in Lock Mode, restrictions are placed on device use. You can receive
calls and messages, but cannot place outgoing calls (except for emergency numbers) until
you unlock the device. Lock Mode also restricts access to menus and the volume key.
Unlock your device by entering the lock code when prompted. (See “Phone Lock” on page
85 for more information.)
Standby Mode
Standby mode is the state of the device once it has found service and is idle. The device
goes into standby mode:
• After you power the device on.
• When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as all device status icons.
1. While in standby mode, enter a phone number, and press to place a call.
2. Press to return to standby mode.
Section 2: Understanding Your Device23
Receive Messages in Standby Mode
You can receive messages in standby mode. When a new message arrives, an alert tone
sounds and the new message appears in the display.
Press the Menu (left) soft touch key () and the following options appear in the display:
• Call — Lets you call the sender of the message.
• Reply — Lets you compose and send a reply message to the sender of the original message.
• Forward — Sends a copy of the message to another recipient.
• Delete — Erases this message from your Inbox.
• Save Contact Number — Saves the message senders number to your Contacts List.
• Save Message— Saves the message to one of your internal or external folders.
• Message List — Shows the Inbox screen in the display.
Use the navigation keys to highlight the desired option and press the key.
Press ,
the Inbox.
Talk Mode
You can place and receive calls only when your device is on. While in a call your device is
in talk mode. Press the Menu (left) soft touch key () to display a list of menu options.
See “The In-Use Options” on page 38 for more information.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
Vibrate Mode
, or to clear the message from the display. The message is saved in
• In standby mode, press and hold . “Silent Mode On” briefly appears in the display and
your device returns to standby mode.
• While in Manner mode and standby mode, press and hold . “Silent Mode Off” briefly
appears in the display and your device returns to standby mode.
1. In standby mode, press the MENU (left) soft touch key (), then press (for
CUSTOMIZE), (for Settings), (for Sound), and for Ring Vibration.
TUV
The following options appear in the display:
• Ring Only — An incoming call plays the ringtone selected with the Ring options.
• Vibrate — An incoming call causes the device to vibrate.
• Light Only — An incoming call causes a message to appear in the display.
• Vibrate then Ring — An incoming call causes the device to vibrate then play a ringtone.
• Ring and Vibrate — An incoming call causes the device to play a ringtone and vibrate.
2. Use the Up and Down navigation keys to highlight Vibration, then press the key.
SHIFT
SHIFT
@
.
@
.
?
@
.
?
?
24
Note: The Vibrate icon () appears in the display when the device is in Vibration mode.
Your Device’s Modes
Adjust the Ringer
@
.
In standby mode, press the MENU (left) soft touch key (), then press (for
1.
CUSTOMIZE), (for Settings), (for Sound), and for Volume. The
TUV
@
.
?
ABC
?
Volume screen appears in the display.
2. Use the Up and Down navigation keys to highlight Ring Volume.
3. Use the Left and Right navigation keys to adjust the Ring Volume to one of its five
settings. The current ringtone sounds at the selected level.
4. When you are satisfied with the setting, press the key. Your device returns to the
Sound menu.
Camera Mode
Camera and Video Camera modes let you activate your device’s camera to take pictures or
videos. In Camera/Video Camera mode, you can also adjust the resolution and appearance
of your pictures/videos. See “Section 9: SNAP” on page 94 for more information.
• Entering Camera Mode — In standby mode, press and hold the Camera key () on the
lower right side of your device.
• Entering Video Camera Mode — In standby mode, press the Camera key on the lower right
side of your device. The SNAP menu appears in the display. Select Video Camera.
• Exiting Camera Mode — Press the key or the key.
Section 2: Understanding Your Device25
Section 3: Call Functions
Topics Covered
• Making a Call — Number Entry Dialing
• Making a Call — Speed Dialing
• Answering a Call
• Ignoring a Call
• Adjusting the Call Volume
• Call Log
• Roaming
This section explains how to make or answer a call. This section also includes the features
and functionality associated with making or answering a call.
26
Making a Call — Number Entry Dialing
Making a Call — Number Entry Dialing
1. With the device on, enter the number you wish to call using the keypad.
2. Press the key to place the call.
Dialing Emergency Numbers
To place an emergency call:
1. With the device on, enter 911 using the keypad.
2. Press the key to place the call.
IMPORTANT! Emergency number 911 is hard-coded into your device. You can dial this number almost any time, even
when the device is locked or restricted.
If you call 911 an audible tone is heard and an Emergency prompt appears in the display for the duration of the call.
IMPORTANT! Because of various transmission methods, network parameters, and user settings necessary to complete a
call from your wireless device, a connection cannot always be guaranteed. Therefore, emergency calling may not be
available on all wireless networks at all times.
IMPORTANT! DO NOT depend on this device as a primary method of calling 911 or for any other essential or emergency
communications.
Dialing International Numbers
Call another country from the U.S.
In standby mode, enter the three-digit exit code (011) for the United States.
1.
2. Enter the country code for the country that you are calling.
3. Enter the number that you wish to call, then press the key.
Note: Puerto Rico and Canada are on the North American dialing plan. When making calls to Puerto Rico and Canada it is
similar to making calls within the United States, no unique country codes are necessary.
Placing calls when outside the U.S. — Mexico
• Calling locally within Mexico: Dial the seven or eight-digit number.
• Calling long distance within Mexico: Dial 01, plus the ten-digit number (includes area code).
• Calling to the U.S. or Canada from Mexico: Dial 001, plus the ten-digit number (includes ar ea
code).
• Calling Voicemail from Mexico: Dial 001, plus your ten-digit wireless number. Once you hear
the recorded prompt, press and enter your passcode.
SHIFT
Section 3: Call Functions27
Manual Pause Calling
When you call automated systems (like banking services), you are often required to enter a
password or account number. Instead of manually entering the numbers each time, you
can store the numbers in your Contacts along with special characters called pauses.
• Hard Pause (P) — A hard pause stops the calling sequence until you press the key.
• 2 Sec Pause(T) — A two-second pause stops the calling sequence for two seconds and then
automatically sends the remaining digits.
To manually call a number with pause(s) without storing it to your Contacts:
1. Enter the number you wish to call.
2. Press the Menu (left) soft touch key (). A pop-up menu containing the following
options appears in the display:
• Hard Pause(P) — a hard pause (awaits input from you ending in your pressing the
key).
• 2 Sec Pause(T) — a two-second pause.
3. Use the navigation keys to highlight the desired pause option.
4. Press to enter the highlighted pause into your number sequence.
5. Press to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your device’s Contacts list. Speed
Dialing lets you quickly and easily dial any contact in your Contacts list by using that
contact’s location number in the list. You can assign and change location (speed dial)
numbers for your contacts. (See “Speed Dial Numbers” on page 62 for more information.)
One-Touch Dialing
Memory locations 002 through 009 are special One-Touch dialing locations. You can call
the phone numbers stored in your device’s Contacts list from 002 through 009 by pressing
and holding a single key.
Example: For location number 003, press and hold the key until the name and number appear in the display and
the number is dialed.
DEF
Two-Touch Dialing
Memory locations 010 through 099 are special Two-Touch dialing locations.
@
.
Example: For location number 013, briefly press the key, then press and hold the key until the name and
number appear in the display and the number is dialed.
?
28
DEF
Answering a Call
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch dialing locations.
@
.
Example: For location number 113, briefly press the key, briefly press the key again, then press and hold the
DEF
key until the name and number appear in the display and the number is dialed.
?
@
.
?
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) T pause(s) simply wait for the pauses to
pass and the dialing to complete.
• If you speed dial a contact that contains (hard) P pause(s), wait for the appropriate prompt(s)
from the number you are calling (credit card number, bank account number, and so on) and
enter the appropriate response(s).
Answering a Call
Your device notifies you of a call in the following ways:
• A ring tone sounds and/or your device vibrates [Your device provides five ring volume
settings — 1 – 5 — and five Ring Vibration settins — Ring Only, Vibrate, Light Only, Ring then
Vibrate, Ring and Vibrate.]
• A phone number (unless blocked by the caller) and a name appear in the display (If the caller’s
number and name are stored in your Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from restricted number, or no
number appears in the display.
• Your device continues to notify you of the call until one of the following events occurs:
• You answer the call.
• You ignore the call.
• The calling party ends the call.
• The call is sent to voicemail.
Answering an Incoming Call
䡵 Press the key. The ring tone and/or vibration stop and the caller’s voice can be
heard in the earpiece.
Tip: You can set your device to answer calls when you Slide Open the handset, Open + Any Key, or when you press the
key. (See ‘Call Settings” on page 80 for more information.
Section 3: Call Functions29
Ignoring a Call
When you ignore an incoming call, the call is immediately forwarded to your voice mail.
䡵 During an incoming call, press and hold the Silence (left) soft touch key () to
silence the ringer.
Press and hold the Silence (left) soft touch key () a second time to ignore the call
and immediately forward the call to your voice mail.
Press and hold the Ignore (right) soft touch key
to ignore the call.
Adjusting the Call Volume
In incall mode, repeatedly press the volume key () down until the Call Volume Level
desired appears in the display. The volume key is on the left side of your device.
Call Log
The Call Log retains information about Missed, Outgoing, Ignored, and Incoming calls. You
can also view call duration times for your last call and the time totals for all calls.
Review the Calls Log — Menu Method
1. In standby mode, press the MENU (left) soft touch key () then press (for
CONTACT) and (for Call Log). The following Call Logs appear in the display:
• Press for All Calls.
• Press for Missed Calls.
• Press for Outgoing Calls.
• Press for Ignored Calls.
• Press for Incoming Calls.
• Press for Call Times.
GHI
@
.
?
ABC
DEF
GHI
JKL
MNO
2. Press the number key associated with the Calls log that you wish to review, or
Use the Left and Right navigation keys to scroll through the Call Logs that you wish to
review.
Note: In cases where there is a Contacts match for a Calls log entry, the name associated with the number appears in the
display instead of the number.
JKL
30
Loading...
+ 144 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.