Samsung SP-F10M, SP-F10 SP-F10M Owner's Instructions Manual
SP-F10 SP-F10M
Multimedia Projector
Owner’s Instructions
The color and the appearance of the product may differ
from the illustrations in this manual. The specifications are
subject to change without prior notice to improve
performance.
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
INSTALLATION AND CONNECTION
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Leveling with Adjustable Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Zoom and Focus Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Screen Size and Projection Distance . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Ventilation openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Rear Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Supported Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Connecting with a PC and Setting up the PC . . . . . . . . . . . . . . . . . . 2-10
Connecting a PC using an HDMI/DVI cable . . . . . . . . . . . . . . . . . . . . 2-11
Connecting an HDMI-Compatible Device . . . . . . . . . . . . . . . . . . . . . . 2-12
Connecting an AV device using a D-Sub cable . . . . . . . . . . . . . . . . . 2-13
Connecting an AV device with Component output . . . . . . . . . . . . . . 2-14
Connecting using a Video/S-Video cable . . . . . . . . . . . . . . . . . . . . . . 2-15
Connecting an External Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
Connecting an External Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Connecting to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Kensington Lock slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
USING
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Front, Upper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
LED Indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-5
Network Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
MEDIA PLAY FUNCTION (ONLY FOR SP-F10M)
Connecting a USB Storage Device and Precautions . . . . . . . . . . . . . 4-1
Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Supported File Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
TROUBLESHOOTING
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
MORE INFORMATION
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
RS-232C Command Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Correct Disposal - Europe only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
1 Major Safety Precautions
1-1 Before You Start
Icons used in this manual
Using this Manual
• The contents of this manual are subject to change without prior notice for performance improvement.
• Make yourself fully aware of the safety precautions before using this product.
• If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
Copyright © 2010 Samsung Electronics Co., Ltd. All rights reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written
permission of Samsung Electronics, Co., Ltd.
ICON NAME MEANING
Caution Indicates cases where the function may not work or the setting may be canceled.
Note Indicates a hint or tip to operate a function.
Major Safety Precautions 1-2
1-2 Care and Maintenance
Cleaning the Surface and the Lens
Cleaning Inside the Projector
Clean the projector using a soft dry cloth.
• Avoid cleaning the product with a flammable substance such as
benzene or thinner.
• Avoid scratching the lens with your fingernails or a sharp object.
This may result in scratches or damage to the product.
• Avoid cleaning the product with a wet cloth or by directly
spraying water onto the product.
If water enters the product, it may result in fire, electric shock, or
a problem with the product.
• A white stain may appear on the surface of the projector if water
gets on it.
The appearance and the color may differ depending on the
model.
For cleaning the interior of the projector, contact an authorized
Samsung Service Center.
• Contact a Service Center if dust or other substances are inside
the projector.
1-3 Major Safety Precautions
1-3 Safety Precautions
Icons used for safety precautions
Meaning of Signs
Power Related
The following images are for your reference and may differ depending on models and countries.
The appearance and the color may differ depending on the model.
Warning
ICON NAME MEANING
Warning
Failing to follow the precautions marked with this sign may result in a serious injury or even
a fatality.
Caution
Failing to follow the precautions marked with this sign may result in a personal injury or
property damage.
Do not perform. Must be followed.
Do not disassemble.
The power plug must be unplugged from the
wall outlet.
Do not touch. Must be grounded to prevent electric shock.
Plug the power plug in firmly.
• Otherwise, it may result in fire.
Avoid connecting multiple electric appliances to a single wall outlet.
• Otherwise, it may result in fire due to
overheating of the wall outlet.
Avoid using a damaged power cord or plug
or a loose power outlet.
• Otherwise, it may result in electric
shock or fire.
Avoid bending or twisting the power cord
excessively and avoid placing heavy
objects on the cord.
• Otherwise, it may result in electric
shock or fire due to a damaged power
cord.
Avoid plugging in or unplugging the power
supply with wet hands.
• Otherwise, it may result in electric
shock.
To move the product, turn the power off
and unplug the power cord and any other
wires connected to the product.
• Otherwise, it may result in electric
shock or fire due to the damaged
power cord.
Major Safety Precautions 1-3
Caution
Installation Related
Warning
Make sure to connect the power cord to a
grounded wall outlet (for insulation class 1
equipment only).
• Otherwise, it may result in electric
shock or injury.
When unplugging the power plug from the
wall outlet, make sure to hold the power
plug by the plug and not by the cord.
• Failing to do so may result in electric
shock or fire.
Do not turn the product on or off by plugging or unplugging the power plug. (Do not
use the power plug as a power switch.)
Unplug the power plug before cleaning the
product.
• There is a danger of electric shock or
fire.
Keep the power cord away from sources of
heat.
Connect the power plug to a wall outlet
that can be easily reached.
• When a problem occurs with the
product, you must unplug the power
plug to cut the power off completely.
You cannot cut the power off
completely using only the power button
on the product.
Avoid installing the product in a location
exposed to direct sunlight and installing
the product near a heat source such as a
fire or heater.
• This may shorten the product life cycle
or cause fire.
Avoid installing the product in a badly-ventilated location such as inside a bookshelf
or closet.
• Otherwise, it may result in fire due to
internal overheating.
When installing the product in a cabinet or
shelf, take care so that the front end of the
product is completely supported by the
cabinet or shelf.
• Failing to do so may result in the
product falling and resulting in damage
to the product or injury.
• Make sure to use a cabinet or shelf
suitable to the size of the product.
When installing the product on a console
or shelf, make sure that the front of the
product does not protrude out of the console or shelf.
• Otherwise, this may cause the product
to fall off and result in a malfunction or
injury.
Keep the power cord away from heaters.
• The coating of the power cord may
melt and cause electric shock or fire.
When thunder or lighting occurs, unplug
the power cord.
• Failing to do so may result in electric
shock or fire.
1-3 Major Safety Precautions
Caution
Usage Related
Do not install the product in a location
exposed to dust, moisture (sauna), oil,
smoke or water (rain drops) and do not
install it in a vehicle.
• This may result in electric shock or fire.
Do not install the product in areas with
heavy dust.
Take care not to block the vent with a table
cloth or curtain.
• Otherwise, it may result in fire due to
internal overheating.
Do not let the product drop while moving it.
• This may result in a problem with the
product or injury.
When putting the product down, place it
gently.
• Failing to do so may result in a problem
with the product or injury.
Do not install the product at a height where
children may reach it.
• If a child touches the product, the
product may fall and this may result in
injury.
Avoid inserting metal objects such as
chopsticks, coins or hairpins, or inflammable objects into the product (the vents,
ports, etc).
• If water or an alien substance enters
the product, turn the power off, unplug
the power cord and contact a service
center.
• Otherwise, it may result in a problem
with the product, electric shock or fire.
Do not let children place objects such as
toys or cookies on the product.
• If a child tries to reach for any of these
objects, the product may fall and cause
harm.
Do not disassemble, or attempt to fix or
modify the product.
• When the product requires repairs,
contact a Service Center.
Do not look directly at the projecting light
of the lens nor project the picture into
someone's eyes.
• This is dangerous, especially for
children.
Avoid using or placing inflammable spray
or objects near the product.
• This may result in an explosion or fire.
When you remove batteries from the
remote, be careful that they are not swallowed by children. Keep batteries out of
the reach of children.
• If swallowed, see a doctor immediately.
Avoid placing a liquid container such as a
vase, flowerpot, beverage, cosmetics or
drugs, or a metal object over the product.
• If water or an alien substance enters
the product, turn the power off, unplug
the power cord and contact a service
center.
• Otherwise, it may result in a problem
with the product, electric shock or fire.
Major Safety Precautions 1-3
Caution
If the product generates a strange noise, a
burning smell, or smoke, unplug the power
plug immediately and contact a service
center.
• Failing to do so may result in electric
shock or fire.
If water or a foreign substance enters the
product, turn the product off, unplug the
power cord from a wall outlet, and contact
a Service Center.
If the power plug pin or jack is exposed to
dust, water or alien substances, clean it
thoroughly.
• There is a danger of electric shock or
fire.
Do not use the product while it indicates a
malfunction, such as no sound or no picture.
• Turn the product off immediately,
unplug the power cord from a wall
outlet, and contact a Service Center.
When cleaning the product, disconnect the
power cord and clean the product with a
soft dry cloth.
• Avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or
cleansing agent when cleaning the
product.
This may result in the exterior being
deformed or the print being removed.
When a gas leak occurs, do not touch the
product or the power plug and ventilate
immediately.
• A spark may result in an explosion or
fire.
• During a thunder or lighting storm, do
not touch the power cord or antenna
cable
When not using the product for a long
time, such as leaving your home, unplug
the power cord from the wall outlet.
• Otherwise, it may cause dust
accumulation and result in fire caused
by overheating or a short circuit or
result in an electric shock.
Do not touch the lens on the product.
• This may cause damage to the lens.
If the product is installed in a location
where the operating conditions vary considerably, a serious quality problem may
occur due to the surrounding environment.
In this case, install the product only after
consulting our Call Center.
• Places exposed to microscopic dust,
chemicals, too high or low temperature,
high humidity, such as airports or
stations where the product is
continuously used for a long time etc..
Do not touch any outer part of the product
with tools such as a knife or a hammer.
If you drop the product or the case is damaged, turn the power off and unplug the
power cord. Contact a service center.
• Failing to do so may result in fire or
electric shock.
To clean dirt or stains on the front projection lens, use spray or a wet cloth dampened with neutral detergent and water.
Make sure to place your remote control on
a table or desk.
• If you step on the remote control, you
may fall and hurt yourself or the
product may be damaged.
Ask a Service Center to clean the interior
of the projector at least once per year.
1-3 Major Safety Precautions
To avoid burning yourself, do not touch the
vents or lens while operating or right after
turning off LED.
Do not clean the product using water spray
or a wet cloth. Avoid using any chemicals
such as detergents, industrial or automotive polish, abrasive, wax, benzene, alcohol on any plastic part of the product such
as projector case, since this may cause
damage.
Do not open any cover on the product.
• This would prove hazardous because
of high-voltage current inside the
product.
Do not use any undesignated battery.
Be careful not to touch the ventilation hole
while the projector is on as hot air comes
out.
The ventilation hole is hot for some time
though the projector is turned off. Keep
you hands or body off the ventilation hole.
Do not place objects vulnerable to heat
near the projector.
Be careful to keep your body away from
the projector lense while working. The lens
is hot.
(Children and those who have sensitive
skin should be more careful.)
Take care not to lose the lens cover of the
product.
• The lens could get damaged.
• The lens cover protects the lens and
should be used when the projector is
turned off.
• To hide the screen while the projector is
turned on, use the BLANK feature.
Installation and Connection 2-1
2 Installation and Connection
2-1 Package Contents
• Unpack the product and check if all of the contents listed below have been included.
• Store the packaging box in case you need to move the product at a later date.
Projector
A ceiling mount is not included and must be purchased separately. Use the included screws to attach the projector to
the ceiling mount bracket.
CONTENTS
Quick Setup Guide Warranty Card
(Not available in all locations)
User Manual Power Cord
Remote Control / 2 Batteries
(Only for SP-F10M)
( Not available in all loca-
tions)
Remote Control / 1 Battery
(Only for SP-F10)
( Not available in all loca-
tions)
Cleaning Cloth D-Sub Cable
4 Screws
(For bracket of ceiling
mount.)
Lens cover
2-2 Installation and Connection
2-2 Installing the Projector
Install the projector so that the beam from the projector is perpendicular to the screen.
• Place the projector so that the lens aims at the center of the screen. If the screen is not vertical, the picture on the
screen may not appear rectangular.
• Do not install the screen in bright surroundings. If the surroundings are too bright, the picture on the screen will be
washed out and not display clearly.
• When using the projector in bright surroundings, use curtains to block the light.
• You can install the projector in the following locations relative to the screen: Front-Floor / Front-Ceiling / Rear-Floor /
Rear-Ceiling. To view the installation position settings, see below.
To adjust the picture when you install the projector behind the screen
To adjust the picture when you install the projector in the front of the screen
Installing behind a semi-transparent screen.
When you install the projector behind a semi-transparent screen,
you can use the menu to adjust the picture so that it displays correctly, depending on where you've located the projector, rearfloor (or low) or rear-ceiling.
1. For rear-floor, press :
Menu > Setup > Install > Rear-Floor
2. For rear-ceiling, press :
Menu > Setup > Install > Rear-Ceiling
Installing the projector in front of the screen.
When you install the projector in front of a screen, you can use
the menu to adjust the picture so that it displays correctly,
depending on where you’ve located the projector, front-floor (or
low) or front-ceiling.
1. For front-floor, press :
Menu > Setup > Install > Front-Floor
2. For front-ceiling, press :
Menu > Setup > Install > Front-Ceiling
Installation and Connection 2-3
2-3 Leveling with Adjustable Feet
The projector can be adjusted to a height of up to 1.18 inches (30mm, about 12 °) from the reference point.
If
<Auto Keystone>
is set to
<On>, <V-Keystone>
is adjusted automatically
.
If fine tuning is required after auto-adjustment, use <
V-Keystone
>.
Press the PUSH buttons, as shown, to adjust the legs and level
the projector.
2-4 Installation and Connection
2-4 Zoom and Focus Adjustment
The size of your screen determines the distance you set your projector from the screen.
If you do not install your projector at the projection distance specified in the Screen Size and Projection Distance table in
Section 2-5, you will not be able to adjust the focus correctly.
Zoom Knob : You can adjust the size of the image within the
zoom range by manipulating the Zoom Knob.
Focus Ring : Focus the picture on the screen using the Focus
Ring.
Installation and Connection 2-5
2-5 Screen Size and Projection Distance
A. Screen / Z. Throw Distance / Y’. Distance from Lens Center to Image Bottom
Install the projector on a flat, even surface and level the projector using the adjustable feet to obtain optimal picture quality. If
images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward.
SCREEN SIZE THROW DISTANCE OFFSET
M (DIAGONAL) X (HORIZONTAL) Y (VERTICAL) Z (TELE) Z (WIDE) Y'
INCHES / CM INCHES / CM INCHES / CM INCHES / CM INCHES / CM INCHES / CM
40 / 101.6 32 / 81.3 24 / 61.0 57 / 144.7 47 / 120.3 2.4 / 6.1
50 / 127.0 40 / 101.6 30 / 76.2 71 / 180.8 59 / 150.4 3.0 / 7.6
60 / 152.4 48 / 121.9 36 / 91.4 85 / 217.0 71 / 180.4 3.6 / 9.1
70 / 177.8 56 / 142.2 42 / 106.7 100 / 253.2 83 / 210.5 4.2 / 10.7
80 / 203.2 64 / 162.6 48 / 121.9 114 / 289.4 95 / 240.6 4.8 / 12.2
90 / 228.6 72 / 182.9 54 / 137.2 128 / 325.5 107 / 270.7 5.4 / 13.7
100 / 254.0 80 / 203.2 60 / 152.4 142 / 361.7 118 / 300.7 6.0 / 15.2
110 / 279.4 88 / 223.5 66 / 167.6 157 / 397.9 130 / 330.8 6.6 / 16.8
120 / 304.8 96 / 243.8 72 / 182.9 171/ 434.0 142 / 360.9 7.2 / 18.3
130 / 330.2 104 / 264.2 78 / 198.1 185 / 470.2 154 / 391.0 7.8 / 19.8
140 / 355.6 112 / 284.5 84 / 213.4 199 / 506.4 166 / 421.0 8.4 / 21.3
150 / 381.0 120 / 304.8 90 / 228.6 214 / 542.5 178 / 451.1 9.0 / 22.9
160 / 406.4 128 / 325.1 96 / 243.8 228 / 578.7 189 / 481.2 9.6 / 24.4
170 / 431.8 136 / 345.4 102 / 259.1 242 / 614.9 201 / 511.3 10.2 / 25.9
180 / 457.2 144 / 365.8 108 / 274.3 256 / 651.1 213 / 541.3 10.8 / 27.4
190 / 482.6 152 / 386.1 114 / 289.6 271 / 687.2 225 / 571.4 11.4 / 29.0
200 / 508.0 160 / 406.4 120 / 304.8 285 / 723.4 237 / 601.5 12.0 / 30.5
210 / 533.4 168 / 426.7 126 / 320.0 299 / 759.6 249 / 631.5 12.6 / 32.0
220 / 558.8 176 / 447.0 132 / 335.3 313 / 795.7 260 / 661.6 13.2 / 33.5
230 / 584.2 184 / 467.4 138 / 350.5 328 / 831.9 272 / 691.7 13.8 / 35.1
240 / 609.6 192 / 487.7 144 / 365.8 342 / 868.1 284 / 721.8 14.4 / 36.6
250 / 635.0 200 / 508.0 150 / 381.0 356 / 904.2 296 / 751.8 15.0 / 38.1
260 / 660.4 208 / 528.3 156 / 396.2 370 / 940.4 308 / 781.9 15.6 / 39.6
2-5 Installation and Connection
This projector is designed to show images optimally on a 80 ~ 120 inch sized screen.
270 / 685.8 216 / 548.6 162 / 411.5 384 / 976.6 320 / 812.0 16.2 / 41.1
280 / 711.2 224 / 569.0 168 / 426.7 399 / 1012.7 332 / 842.1 16.8 / 42.7
290 / 736.6 232 / 589.3 174 / 442.0 413 / 1048.9 343 / 872.1 17.4 / 44.2
300 / 762.0 240 / 609.6 180 / 457.2 427 / 1085.1 355 / 902.2 18.0 / 45.7
SCREEN SIZE THROW DISTANCE OFFSET
M (DIAGONAL) X (HORIZONTAL) Y (VERTICAL) Z (TELE) Z (WIDE) Y'
INCHES / CM INCHES / CM INCHES / CM INCHES / CM INCHES / CM INCHES / CM
Installation and Connection 2-6
2-6 Ventilation openings
For the location of the ventilation openings, see the picture below:
• Do not block the ventilation openings. Blocking the ventilation openings can cause your projector to overheat and may cause
it to fail.
Air outtake vent
Air intake vent
2-7 Installation and Connection
2-7 Rear Side
The appearance and the color may differ depending on the model.
1. LAN port 8. Kensington Lock slot
2. S-VIDEO IN port 9. Power port
3. AUDIO OUT port 10. PC IN port
4. PC OUT port 11. RS-232C port
5. HDMI/DVI IN port 12. [AV IN] VIDEO port
6. Remote Control Signal Receiver 13. [AV IN] L-AUDIO-R port
7. USB port (Only for SP-F10M)
Installation and Connection 2-8
2-8 Supported Display Modes
PC Timing (D-Sub/HDMI)
FORMAT RESOLUTION
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
IBM 640 x 350 70Hz 31.469 70.086 25.175
IBM 640 x 480 60Hz 31.469 59.940 25.175
IBM 720 x 400 70Hz 31.469 70.087 28.322
VESA 640 x 480 60Hz 31.469 59.940 25.175
MAC 640 x 480 67Hz 35.000 66.667 30.240
VESA 640 x 480 70Hz 35.000 70.000 28.560
VESA 640 x 480 72Hz 37.861 72.809 31.500
VESA 640 x 480 75Hz 37.500 75.000 31.500
VESA 720 x 576 60Hz 35.910 59.950 32.750
VESA 800 x 600 56Hz 35.156 56.250 36.000
VESA 800 x 600 60Hz 37.879 60.317 40.000
VESA 800 x 600 70Hz 43.750 70.000 45.500
VESA 800 x 600 72Hz 48.077 72.188 50.000
VESA 800 x 600 75Hz 46.875 75.000 49.500
MAC 832 x 624 75Hz 49.726 74.551 57.284
VESA 1024 x 768 60Hz 48.363 60.004 65.000
VESA 1024 x 768 70Hz 56.476 70.069 75.000
VESA 1024 x 768 72Hz 57.672 72.000 78.434
VESA 1024 x 768 75Hz 60.023 75.029 78.750
VESA 1152 x 864 60Hz 53.783 59.959 81.750
VESA 1152 x 864 70Hz 63.000 70.000 96.768
VESA 1152 x 864 72Hz 64.872 72.000 99.643
VESA 1152 x 864 75Hz 67.500 75.000 108.000
VESA 1280 x 720 60Hz 44.772 59.855 74.500
VESA 1280 x 720 70Hz 52.500 70.000 89.040
VESA 1280 x 720 72Hz 54.072 72.000 91.706
VESA 1280 x 720 75Hz 56.456 74.777 95.750
VESA 1280 x 768 60Hz 47.776 59.870 79.500
VESA 1280 x 768 75Hz 60.289 74.893 102.250
VESA 1280 x 800 60Hz 49.702 59.810 83.500
VESA 1280 x 800 75Hz 62.795 74.934 106.500
VESA 1280 x 960 60Hz 60.000 60.000 108.000
VESA 1280 x 960 70Hz 69.930 70.000 120.839
2-8 Installation and Connection
All resolutions higher or lower than 1024x768 are converted to 1024x768 by the Scaler chip inside the projector.
If the resolution of the signal output by the PC matches the real resolution (1024x768) of the projector, the screen quality is
optimal.
AV Timing (D-Sub)
AV Timing (HDMI)
VESA 1280 x 960 72Hz 72.072 72.000 124.540
VESA 1280 x 960 75Hz 75.231 74.857 130.000
VESA 1280 x 1024 60Hz 63.981 60.020 108.000
VESA 1280 x 1024 70Hz 74.620 70.000 128.943
VESA 1280 x 1024 72Hz 76.824 72.000 132.752
VESA 1280 x 1024 75Hz 79.976 75.025 135.000
VESA 1400 x 1050 60Hz 65.317 59.978 121.750
VESA 1440 x 900 60Hz 55.935 59.887 106.500
VESA 1440 x 900 75Hz 70.635 74.984 136.750
VESA 1600 x 1200 60Hz 75.000 60.000 162.000
FORMAT RESOLUTION SCAN
BT.601 SMPTE 267M 480i 59.94Hz Interlaced
BT.1358 SMPTE 293M 480p 59.94Hz Progressive
BT.601 576i 50Hz Interlaced
BT.1358 576p 50Hz Progressive
SMPTE 296M 720p 59.94Hz/60Hz Progressive
720p 50Hz Progressive
BT.709 SMPTE 274M 1080i 59.94Hz/60Hz Interlaced
1080i 50Hz Interlaced
FORMAT RESOLUTION SCAN
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
EIA-861 Format1 640 x 480 Progressive 59.940 31.469 25.175
EIA-861 Format1 640 x 480 Progressive 60.000 31.500 25.200
EIA-861 Format2,3 720 x 480 Progressive 59.940 31.469 27.000
EIA-861 Format2,3 720 x 480 Progressive 60.000 31.500 27.027
EIA-861 Format4 1280 x 720 Progressive 59.939 44.955 74.175
EIA-861 Format4 1280 x 720 Progressive 60.000 45.000 74.250
EIA-861 Format5 1920 x 1080 Interlaced 59.939 33.716 74.175
FORMAT RESOLUTION
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
Installation and Connection 2-8
AV Timing (VIDEO/S-VIDEO)
NTSC, NTSC 4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
Your projector supports the standard video formats listed above through its video and s-video inputs. No adjustments are
necessary.
EIA-861 Format5 1920 x 1080 Interlaced 60.000 33.750 74.250
EIA-861 Format17,18 720 x 576 Progressive 50.000 31.250 27.000
EIA-861 Format19 1280 x 720 Progressive 50.000 37.500 74.250
EIA-861 Format20 1920 x 1080 Interlaced 50.000 28.125 74.250
FORMAT RESOLUTION SCAN
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
PIXEL
FREQUENCY
(MHZ)
2-9 Installation and Connection
2-9 Connecting the Power
The appearance and the color may differ depending on the model.
• Plug the power cord into the power terminal on the rear side of the projector.
Installation and Connection 2-10
2-10 Connecting with a PC and Setting up the PC
2-10-1.
Setting up the PC Environment
Check the following items before connecting your PC to your projector.
1. Click the right mouse button on the Windows desktop, and then click [Properties].
The <Display Properties> dialog appears.
2. Click the [Settings] tab, and then set the <Screen resolution>. The optimal resolution for the projector is 1024 x 768. For other
resolutions supported by the projector, see the PC Timing Display Mode table in section 2-8.
You do not have to change the <Color quality> setup.
3. Press the [Advanced] button. Another property window appears.
4. Click the [Monitor] tab and set the <Screen refresh rate>. For the refresh rate that matches the resolution you’ve chosen, see
the refresh rate (60 Hz, 70 Hz, etc.) next to your selected resolution in the PC Timing Display Mode table in section 2-8.
2-10 Installation and Connection
Setting the refresh rate sets both the vertical and horizontal frequencies.
5. Click the [OK] button to close the window, and then click the [OK] button on the <Display Properties> window to close that
window.
6. Shut down the PC and connect it to the projector.
The setup process might vary depending on your type of computer or version of Windows.
(For example, [Properties] appears instead of [Properties (R)] as shown in 1.)
This projector supports 32 bit color quality (per pixel) when it is used as a PC monitor.
Projected images may differ from the images on your monitor depending on the monitor manufacturer or Windows version.
When connecting the projector to a PC, make sure that the PC setup complies with the display settings supported by this
projector. If it does not, you may have signal problems.
2-10-2.
Connecting with a PC
The appearance and the color may differ depending on the model.
Make sure that your PC and projector are turned off.
Installation and Connection 2-10
1. Connect the [PC IN] port on the rear side of the projector to the PC video out (D-sub) port of the PC using a PC video cable.
2. Plug in the power cords of the projector and the PC.
3. Connect the [AV IN (L-AUDIO-R)] input port of the projector to the speaker output ports of the PC using an audio cable.
This product supports plug and play. If you use Windows XP, you do not need to set up the driver on your PC.
Using the Projector
1. Turn on the projector, and then press the [SOURCE] button to select <PC>.
If the <PC> Mode is not available, make sure the PC video cable is properly connected.
2. Turn on the PC, and then set the PC Environment (screen resolution, etc.) if necessary.
3. Adjust the screen.
2-11 Installation and Connection
2-11 Connecting a PC using an HDMI/DVI cable
The appearance and the color may differ depending on the model.
Make sure that your PC and projector are turned off.
1. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI
cable (Not supplied).
- If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied).
- For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-8, "Supported Display Modes".
2. If you connected using a HDMI/DVI cable, connect the [AV IN (L-AUDIO-R)] terminal of the projector to the Audio out terminal
of your PC using an audio cable (Not supplied).
- If you connected with a HDMI/HDMI cable, you do not need an audio cable.
Installation and Connection 2-12
2-12 Connecting an HDMI-Compatible Device
The appearance and the color may differ depending on the model.
Make sure that the AV device and your projector are turned off.
1. Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output
device using an HDMI/DVI or HDMI/HDMI cable.
- If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing(HDMI) in Section 2-8, "Supported Display
Modes".
2. If you connected using a HDMI/DVI cable, connect the [AV IN (L-AUDIO-R)] terminal on the projector to the Audio out terminal
on your digital output device using an audio cable (Not supplied).
- If you connected with a HDMI/HDMI cable, you do not need an audio cable.
2-13 Installation and Connection
2-13 Connecting an AV device using a D-Sub cable
The appearance and the color may differ depending on the model.
Make sure that the AV device and your projector are turned off.
1. Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display
Modes".
2. Connect the [AV IN (L-AUDIO-R)] terminal at the back of the projector to the Audio out terminal of your AV device using an
audio cable (Not supplied).
Loading...