Samsung SP-56L3HX User Manual

DLP TV

SP46L3HX SP50L3HX SP56L3HX SP61L3HX

Owner’s Instructions

Before operating the unit,

please read this manual thoroughly,

and retain it for future reference.

PICTURE IN PICTURE (PIP)

OLOR WEAKNESS ENHANCEMENT MODE

MY COLOR CONTROL

SRS TruSurroundXT

IGITAL NATURAL IMAGE ENGINE

This device is a Class B digital apparatus.

◆ CONNECTING AND PREPARING YOUR TELEVISION

■ Control Panel of Your Television ................................................................... 5

■ Connection Panel of Your Television ............................................................ 6

■ Connecting to an Aerial or Cable Television Network ................................... 8

■ Connecting a Satellite Receiver or Decoder.................................................. 8

■ Infrared Remote Control ................................................................................ 9

■ Inserting the Batteries in the Remote Control................................................ 10

■ Switching Your Television On and Off........................................................... 11

■ Placing Your Television in Standby Mode..................................................... 11

■ Becoming Familiar with the Remote Control ................................................. 12

■ Plug & Play Feature....................................................................................... 13

■ Choosing Your Language.............................................................................. 14

◆ USING YOUR TELEVISION

■ Storing Channels Automatically..................................................................... 15

■ Storing Channels Manually............................................................................ 16

■ Skipping Unwanted Channels ....................................................................... 18

■ Sorting the Stored Channels ......................................................................... 19

■ Activating the Child Lock ............................................................................... 20

■ Assigning Names to Channels ...................................................................... 21

■ Fine Tuning Channel Reception.................................................................... 22

■ Using the LNA (Low Noise Amplifier) Feature............................................... 23

■ Viewing the Channel Scan Picture ................................................................ 23

■ Displaying Information ................................................................................... 24

■ Freezing the Current Picture ......................................................................... 24

■ Changing the Picture Standard ..................................................................... 25

■ Adjusting the Picture Settings........................................................................ 26

■ Selecting the Picture Size.............................................................................. 27

■ Using the Digital NR (Noise Reduction) Feature ........................................... 28

■ DNIe

■ Setting the My Color Control (Easy Control) ................................................. 29

■ Setting the My Color Control (Detail Control) ................................................ 30

(Digital Natural Image engine) ............................................... 28

Symbols

☛

➢

Press Important Note

English - 3

Contents (continued)

◆ USING YOUR TELEVISION (continued)

■ Setting the Film Mode.................................................................................... 31

■ Viewing the Picture In Picture (PIP) .............................................................. 32

■ Changing the Sound Standard ...................................................................... 34

■ Adjusting the Sound Settings ........................................................................ 35

■ Setting the SRS TSXT................................................................................... 35

■ Adjusting the Volume Automatically .............................................................. 36

■ Enjoying the Sound of External Speakers..................................................... 37

■ Selecting the Sound Mode (depending on the model) .................................. 38

■ Setting and Displaying the Current Time....................................................... 39

■ Setting the Sleep Timer ................................................................................. 40

■ Switching the Television On and Off Automatically ....................................... 41

■ Setting the Blue Screen................................................................................. 42

■ Setting the Melody Sound ............................................................................. 42

■ Using the Color Weakness Enhancement Feature ....................................... 43

■ Setting the Picture in PC Mode ..................................................................... 44

■ Viewing an External Signal Source ............................................................... 45

■ Assigning Names to External Sources .......................................................... 46

◆ USING THE TELETEXT FEATURE

■ Teletext Feature ............................................................................................ 47

■ Displaying the Teletext Information ............................................................... 48

■ Selecting Display Options.............................................................................. 48

■ Selecting a Teletext Page.............................................................................. 49

◆ ADDITIONAL INFORMATION AND CONNECTIONS

■ Connecting to the External Input/Output ....................................................... 50

■ Connecting to the S-Video Input.................................................................... 51

■ Connecting to the Digital Input ...................................................................... 52

■ Connecting to the Component Input.............................................................. 53

■ Connecting to the PC Input ........................................................................... 53

■ Setting up Your PC Software (Windows only) ............................................... 54

■ PC/HDMI(DVI) Input Mode ............................................................................ 55

◆ RECOMMENDATIONS FOR USE

■ Setting Up Your Remote Control ................................................................... 56

■ Programming the Remote Control for Other Components ............................ 57

■ Replacing the Lamp....................................................................................... 59

■ Troubleshooting: Before Contacting Service Personnel................................ 60

■ Technical Specifications ................................................................................ 61

English - 4

Control Panel of Your Television

The actual configuration on your TV may be different, depending on

➢

your model.

Switch among video input modes

Display the on-screen menu

Adjust the volume

Select the channels

LED Indicators

Switch the TV On and Off

( :On, :Blinking, :Off)

TIMER LAMP STAND BY/TEMP Indication

Standby mode.

A timer pilot lights when Timer Auto On or Off is selected.

Normal operation.

Normal operation (when Timer Auto On or Off is selected).

Lamp is warming up. The normal picture comes on after 25 seconds.

The normal picture comes on after 25 seconds. (when Timer Auto On or Off is selected)

Air vent cover in the rear of the TV is not properly installed.

Inside temperature of the TV is over normal. Clean the air vent cover in the rear of the TV. Turn the TV back on after 1 hour.

The lamp does not work, please contact an authorized Service Center for assistance.

Picture On/Off

Remote Control Sensor

Access to the selected option on the menu system

➢

◆

You can use the channel selection buttons to switch on the TV when it is in standby mode depending on the model.

◆

When using the on-screen menu the volume adjustment and channel selection buttons have the same function as the

◆

If the remote control no longer works or your have lost it, you can use controls on the panel

…/†/œ/√ buttons on the remote control.

of the TV.

English - 5

Connection Panel of Your Television

The actual configuration on your TV may be different, depending on

➢

your model.

Video Input

Audio Input

S-Video Input

English - 6

Connection Panel of Your Television (continued)

The actual configuration on your TV may be different, depending on

➢

your model.

Rear of the TV

Œ ANT IN

Coaxial connector for aerial or cable network.

´ S-Video Input

Connect to S-Video output jacks of an S-VHS VCR or DVD player.

ˇ Audio/Video Input

Connect to the audio/video output jacks of VCRs, DVD players and similar devices.

¨ Audio/Video Output

Connect to the audio/video input jacks of a recording VCR.

ˆ COMPONENT Input

Connect to the audio and video outputs of DVD or DTV Set-Top Box. 480i/480p/576i/576p/720p/1080i Y, P P

R video signal outputs are available.

Ø PC Input

Connect to the PC audio/video outputs.

∏ DVI Audio Input

Connect to the audio output jacks for device with DVI output.

” HDMI/DVI Input

Connect to the digital device with HDMI or DVI output.

’ SERVICE Jack

It is for repairs and software upgrades.

˝ SCART Input/Output

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

B and

English - 7

Rear of the TV

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆ An outdoor aerial

◆ A cable television network

◆ A satellite network

1 In the first three cases, connect the aerial or network input cable to

the ANT IN jack on the rear of the television.

2 If you are using an indoor aerial, you may need to turn it when

tuning your television until you obtain a picture that is both sharp

Cable Television

Network

and clear. For further details, refer to:

◆ “Storing Channels Automatically” on page 15.

◆ “Storing Channels Manually” on page 16.

Connecting a Satellite Receiver or Decoder

In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV.

◆ Using a RCA cable

Connect the receiver (or decoder) RCA cable to one of the RCA connectors on the rear of the television.

◆ Using a coaxial cable

Connect a coaxial cable to the:

Receiver (or Decoder) output socket.

Television aerial input socket.

➢ If you wish to connect both a satellite receiver (or decoder)

and a VCR, you should connect the:

◆ Receiver (or Decoder) to the VCR

◆ VCR to the television

Otherwise, connect the receiver (or decoder) directly to the television.

Rear of the TV

Satellite Receiver/

Decoder

English - 8

Infrared Remote Control

The performance of the remote control may be affected by bright light.

➢

POWER ON/OFF

PICTURE EFFECT SELECTION

WHEN YOU PRESS A BUTTON , ‘ APPEARS ALONG WITH SELECTED MODE

(TV, VCR, CATV, DVD OR STB) AND REMAINING BATTERIES ON LCD

’

PICTURE SIZE

DIRECT CHANNEL SELECTION

ONE OR TWO-DIGIT CHANNEL

TEMPORARY SOUND SWITCH-OFF

TUNER/CABLE NETWORK

MOVE TO THE REQUIRED MENU

ADJUST AN OPTION VALUE

SOUND EFFECT SELECTION

STILL THE MAIN PICTURE

In the PIP mode, the main and

➢

MIX BOTH TELETEXT INFORMATION

SET THE MBR CODE OF REMOTE

PRESS THE RESET BUTTON FOR

sub pictures are stilled

AND THE NORMAL BROADCAST

AUTOMATIC SWITCH-OFF/

TELETEXT SIZE SELECTION

CONTROL FOR THE PRODUCTS

EXCEPT SAMSUNG PRODUCT

IF YOUR REMOTE CONTROL IS

NOT FUNCTIONING PROPERLY,

TAKE OUT THE BATTERIES AND

ABOUT 2~3 SECONDS. RE-

INSERT THE BATTERIES AND

TRY USING THE REMOTE

SELECTION

VOLUME INCREASE

VOLUME DECREASE

SELECTION

MENU DISPLAY/

TELETEXT INDEX

OPTION/

RESPECTIVELY

at the same time.

TELETEXT DISPLAY/

TELETEXT CANCEL

DNIe ON/DEMO/OFF/

(OPTION)

CONTROL AGAIN.

MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CABLE-BOX (CATV), DVD PLAYER, OR SET-TOP BOX (STB)

SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED

NEXT CHANNEL/ TELETEXT NEXT PAGE

EXTERNAL INPUT SELECTION/ TELETEXT HOLD

PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE

DISPLAY INFORMATION/ TELETEXT REVEAL

EXIT FROM ANY DISPLAY

CONFIRM YOUR CHOICE (STORE OR ENTER)

SOUND MODE SELECTION

SRS TruSurround XT MODE SELECTION

FASTEXT TOPIC SELECTION CURRENT TIME DISPLAY/

TELETEXT SUBPAGE

PIP FUNCTIONS;

- PIP ACTIVATING OR DEACTIVATING (PIP ON)

- SWAPPING THE MAIN AND THE SUB PICTURE (SWAP)

- SELECTING THE CHANNEL OF SUB PICTURE (P

VCR/DVD FUNCTIONS;

- REWIND (REW)

- STOP

- PLAY/PAUSE

- FAST FORWARD (FF)

/∨)

English - 9

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆ Purchase the television

◆ Find that the remote control is no longer operating

correctly

1 Remove the cover on the rear of the remote control by pressing

the symbol ( ) downwards and then pulling firmly to remove it.

2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking

care to respect the polarities:

◆-on the battery against -on the remote control

◆+on the battery against +on the remote control

3 Replace the cover by aligning it with the base of the remote

control and pressing it back into place.

Do not mix battery types, i.e. alkaline and manganese.

English - 10

Switching Your Television On and Off

The mains lead is attached to the rear of your television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television

➢

and the frequency is 50 or 60Hz.

2 Press the power switch on the side of the television toward “ON”

(

I).

3 Press the POWER () button on the remote control (or the “ ”

button on the front of the television).

Result

: The programme that you were watching last is re-

selected automatically.

If you have not yet stored any channels, No clear picture

➢

appears. Refer to “Storing Channels Automatically” on page 15 or “Storing Channels Manually” on page 16.

4 To switch your television off, press the power switch toward “OFF”

(

O).

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce the power consumption.

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1 Press the POWER () button on the remote control to turn the

screen off.

Result

: The

2 To turn the screen back on, simply press the POWER () button

again.

You can also switch on by pressing the P /, TV or numeric

➢

button.

Do not leave your television in Standby mode for long

☛

periods of time (when you are away on holiday, for example). Turn your television off by pressing the power switch on the back of the set. It is best to unplug the set from the mains and aerial.

STAND BY/TEMP indicator on the front of the

television lights.

English - 11

Becoming Familiar with the Remote Control

The remote control is used mainly to:

◆ Change channels and adjust the volume

◆ Display the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button Viewing Function Menu Function

Used to display the next stored channel.

Used to display the previous stored channel.

to Used to display the corresponding channels.

For double digit channels, the second digit must be

➢

pushed immediately after the first. Failure to do this will result in a single digit channel being displayed.

-/--

Used to select a channel numbered ten or over. Press this button, and the “ Enter the two-digit channel number.

Used to switch repeatedly between the last two channels displayed.

To quickly switch between two channels that are far apart, tune to one channel, then use the numeric buttons to select second channel. Then, use the alternate between them.

Used to increase the volume.

Used to decrease the volume.

Used to switch the sound off temporarily.

To turn the sound back on, press this button again, or

➢

press the or button.

” symbol is displayed.

PRE-CH button to quickly

English - 12

Used to display the Used to return to the previous on-screen menu system. menu or normal viewing.

Used to:

◆ Display a submenu containing selections for the current menu option

◆ Increase/decrease a menu option value

Used to confirm your choice.

Used to exit from the menu system and return to normal viewing directly.

Plug & Play Feature

When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in Standby mode, press the POWER () button

on the remote control.

2 To start the Plug & Play, select the Start and press the ENTER

button.

Result

: The available languages are listed.

3 Select the appropriate language by pressing the … or † button.

Press the

Result

ENTER button to confirm your choice.

: The message Check antenna input is displayed.

4 Make sure that the antenna is connected to the TV, and then

press the

Result

ENTER button.

: The available areas are listed.

5 Select the appropriate area by pressing the … or † button.

Press the

Result

ENTER button to confirm your choice.

: The Auto Store menu is displayed.

6 Press the ENTER button to start the search

Result

: The search will end automatically. Channels are sorted

and stored in an order which reflects their position in the frequency range (with lowest first and highest last).

➢ To stop the search before it has finished or return to normal

viewing, press the

7 When the channels have been stored, the Clock Set menu is

displayed. Press the Press the

œ or √ button to move to the hour or minute.

Set these by pressing the Press the

ENTER button to confirm your choice.

8 When it has finished, the message Enjoy your watching is

displayed, and then the channel which has been stored will be activated.

EXIT or ENTER button.

ENTER button to set the current time.

▲ or ▼ button.

Plug & Play

Start Plug & Play

Plug & Play

Language

Move

Plug & Play

Check antenna input.

Plug & Play

Area

Asia/W.Europe

CIS/E.Europe

Hongkong/UK

Australia

NZ/Indonesia

South Africa

America

Move

Plug & Play

Auto Store

Plug & Play

Start

Enter Return

English

Türkçe

Français

Enter Skip

China

Enter Skip

Start

Enter Skip

Stop

Enter Skip

175 MHz

18%

Language

Plug & Play

Clock Set : - - : - - am

Enter Skip

Enjoy your watching.

English - 13

Plug & Play Feature (continued)

If you want to reset this feature...

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Setup.

Result

: The options available in the Setup group are displayed.

3 Press the ENTER button.

Result

: The Plug & Play is selected.

Plug & Play Language : English Time Blue Screen : Off Melody : On Color Weakness : Off

Move Enter Return

Plug & Play Language : English Time Blue Screen : Off Melody : On Color Weakness : Off

Move Enter Return

Setup

√√ √√ √√ √√ √√ √√

√√

4 Press the ENTER button again.

5 To start the Plug & Play, select the Start and press the ENTER

button.

6 For further details on how to set, refer to the previous page.

Choosing Your Language

When you start using your television for the first time, you must

Setup

√√ √√ √√ √√ √√ √√

√√

select the language which will be used for displaying menus and indications.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Setup.

Result

: The options available in the Setup group are displayed.

Plug & Play

Language : English

Time Blue Screen : Off Melody : Off Color Weakness : Off

Move Enter Return

English - 14

Setup

English

Türkçe

Français

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Language.

Press the

Result

ENTER button.

: The available languages are listed.

5 Select the appropriate language by pressing the ▲ or ▼ button.

6 Press the ENTER button to confirm your choice.

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

Result

: The Auto Store is selected.

4 Press the ENTER button again.

Result

: The Area is selected.

5 Press the ENTER button once again.

Result

: The available areas are listed.

6 Select the appropriate area by pressing the ▲ or ▼ button.

Press the

ENTER button to confirm your choice

Auto Store Manual Store Add/Delete Sort Child Lock Name Fine Tune

††

Move Enter Return

Area : Asia/W.Europe

Move Enter Return

Area : Asia/W.Europe Search

Channel

Auto Store

Asia/W.Europe

CIS/E.Europe

Hongkong/UK

Australia

NZ/Indonesia

South Africa

America

Auto Store

√√ √√ √√ √√ √√ √√ √√

√√

China

√√ √√

7 Press the ▲ or ▼ button to select Search.

Press the

ENTER button.

8 To start the search, select the Start and press the ENTER

button.

Result

: The search will end automatically. Channels are sorted

and stored in an order which reflects their position in the frequency range (with lowest first and highest last). The programme originally selected is then displayed.

➢ To stop the search before it has finished or return to normal

viewing, press the

9 When searching and storing are complete, the Sort menu is

displayed.

◆

To sort the stored channels into the desired numerical order, go to Step

5 of the “Sorting the Stored Channels” procedure

on page 19.

◆

To exit from the channel store function without sorting the channels, press the disappear.

10 When the channels have been stored, you can:

◆ Sort them in the order required (see page 19)

◆ Clear a channel (see page 18)

◆ Assign a name to the stored channels (see page 21)

◆ Fine-tune channel reception if necessary (see page 22)

◆ Activate/deactivate the LNA (Low Noise Amplifier) feature

(see page 23)

◆ Activate/deactivate the Digital NR (Noise Reduction) feature (see page 28)

EXIT or ENTER button.

MENU button repeatedly until the menus

Move Enter Return

Press ENTER to start.

Auto Store in progress.

Prog. Ch.

-----

Move Enter Return

Start

Enter Return

175 MHz

Stop

Enter Return

Sort

* * * * *

18%

English - 15

Storing Channels Manually

Auto Store Manual Store Add/Delete Sort Child Lock Name Fine Tune

††

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

œœ √√

Move Adjust

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

Channel

Move Enter Return

Manual Store

887MHz ?

Manual Store

887MHz ?

Return

You can store the television channels, including those received via cable networks.

√√ √√ √√ √√ √√ √√ √√

When storing channels manually, you can choose:

◆ Whether or not to store each of the channels found

◆ The programme number of each stored channel which

you wish to identify

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Manual Store.

Press the

Result

ENTER button.

: The option available in the Manual Store group are

displayed with

Prog. is selected.

5 To assign a programme number to a channel, find the correct

number by pressing the

… or † button.

œœ √√

Move Adjust

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

œœ √√

Move Adjust

887MHz ?

Return

6 If necessary, select the broadcasting standard required. Press the

œ or √ button to select Color System and press the … or † button. The color standards are displayed in the following order. (depending on the model).

◆ AUTO- PAL- SECAM

◆ AUTO- NTSC3.58- NTSC4.43- PAL60

7 Press the œ or √ button to select Sound System and press the …

or † button. The sound standards are displayed in the following order. (depending on the model).

BG- DK- I- M

English - 16

Storing Channels Manually (continued)

8 If you know the number of the channel to be stored, see the

following steps.

◆

Press the œ or √ button to select Channel.

◆

Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

◆

Press the √ button.

◆

Press the numeric buttons (0~9), … or † button to select indicate the required number.

➢ If there is no sound or abnormal sound, reselect the sound

standard required.

9 If you do not know the channel numbers, select the Search by

pressing the search.

Result

10 To store the channel and associated programme number, select

the

Store by pressing the œ or √ button. Press the ENTER

button.

Result

11 Repeat Steps 8 to 10 for each channel to be stored.

œ or √ button. Press the … or † button to start the

: The tuner scans the frequency range until the first

channel or the channel that you selected is received on your screen.

: The OK is displayed.

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

œœ √√

Move Adjust

Prog. Color System Sound System

Channel Search Store

œœ √√

Move Adjust

Prog. Color System Sound System

Channel Search Store

C02 887MHz ?

œœ √√

Move Adjust

887MHz ?

Manual Store

1 AUTO BG

887MHz ?

Manual Store

1 AUTO BG

Return

Channel mode

☛

◆ P (Programme mode):

broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

◆ C (Real channel mode):

entering the assigned number to each air broadcasting station in this mode.

◆ S (Cable channel mode):

entering the assigned number for each cable channel in this mode.

When completing tuning, the

You can select a channel by

Manual Store

Prog. Color System Sound System

1 AUTO BG

Channel Search Store

C02887MHz OK

œœ √√

Move

Enter

English - 17

Return

Skipping Unwanted Channels

Channel

Auto Store Manual Store Add/Delete Sort Child Lock Name Fine Tune

††

Move Enter Return

Add/Delete

Prog. Ch.

-----

1 2 3 4 5

-----

Move Enter Return

Deleted Deleted Deleted Deleted Deleted

You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that

√√ √√ √√ √√ √√ √√ √√

you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Add/Delete.

Press the

Result

ENTER button.

: The Add/Delete menu is displayed with the current

channel automatically is selected.

Prog. Ch.

Add/Delete

-----

Adjust Enter Return

Deleted

Added

Deleted

deleted. Press the

ENTER button.

6 To add or delete the channel, select Added or Deleted by

pressing the

▲ or ▼ button.

7 Press the ENTER button to confirm.

5 Press the ▲ or ▼ button to select the channel to be added or

English - 18

Sorting the Stored Channels

This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using the auto store. You can delete those channels you do not want to keep.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Sort. Press the ENTER button.

Result

: The Sort menu is displayed.

5 Select the channel that you wish to move by pressing the ▲ or ▼

button. Press the ENTER button.

6 Select the number of the programme to which the channel is to be

moved by pressing the

Result

: The channel is moved to its new position and all other

channels are shifted accordingly.

7 Repeat Steps 5 to 6 until you have moved all the channels to the

required programme numbers.

▲ or ▼ button. Press the ENTER button.

Channel

Auto Store Manual Store Add/Delete Sort Child Lock Name Fine Tune

††

Move Enter Return

Sort

Prog. Ch.

-----

1 2 3 4 5

Prog. Ch.

2 3 4 5

-----

Move Enter Return

Sort

-----

√√ √√ √√ √√ √√ √√ √√

Move Enter Return

English - 19

Auto Store Manual Store Add/Delete Sort Child Lock Name Fine Tune

††

Move Enter Return

Prog. Ch. Lock

-----

Move Enter Return

Prog. Ch. Lock

-----

Adjust Enter Return

Activating the Child Lock

This feature allows you to prevent unauthorized users, such as

Channel

Child Lock

* * * * *

Child Lock

* *

Unlocked Unlocked Unlocked Unlocked Unlocked

Unlocked Unlocked

Locked

Unlocked Unlocked

√√ √√ √√ √√ √√ √√ √√

children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using front panel buttons. Only remote control can release the Child Lock setting, so keep the remote control away from children.

1 Press the MENU button.

Result

: The main menu is displayed.

2 Press the ▲ or ▼ button to select Channel.

Result

: The options available in the Channel group are

displayed.

3 Press the ENTER button.

4 Press the ▲ or ▼ button to select Child Lock.

Press the

Result

ENTER button.

: The Child Lock menu is displayed with the current

channel automatically is selected. Blue Screen is displayed when the activated.

5 Press the … or † button to select the channel to be locked.

6 Press the ENTER button. To lock the channel, select Locked by

pressing the Unlocked).

… or † button (to unlock the channel, select

7 Press the ENTER button to confirm.

Child Lock is

English - 20

+ 44 hidden pages