Samsung SNC-35E User Manual
TABLE
CAUTION …………………………………………………………………………….2
1. INSTALLATION METHODS ..…………………….…………………………….3
1-1)WINDOWS 98/98SE INSTALLATION METHOD …..……………………….3
1-2)WINDOWS XP INSTALLATION METHOD …………………………………5
1-3)UNINSTALLATION ..…….………………………………………………………7
3.1-1)WINDOWS 98/98SE/ME UNINSTALLATION ……..……………………7
3.2-1 WINDOWS XP NINSTALLATION….. .…………………………………...8
REINSTALLATION ….…………………………….………………………………..8
SAMSUNG WARRANTY …..……………………………………………………….9
THANK YOU FOR CHOOSING ANYCAM.
Please read all the instructions carefully. They will help you to become an AnyCam expert.
We promise that all software programs and manuals for the AnyCam (SNC-35E) will be
upgraded continuously by its website and the manufacturer of the bundled software. If you
have any questions or problems using AnyCam (SNC-35E), please email us so that we can
resolve your problem.
Once again, thank you for your interest in our product and we hope you enjoy using AnyCam
(SNC-35E).
MORE INFOMATION
To make the best use of our AnyCam, please refer to the manual included in software
CD(Manual folder).
If you have any question, please visit our web site:
http://www.samsunganycam.com
CAUTION
Issues that require special attention during AnyCam installation:
Avoid installing near heating equipment, humidified area, and direct sunlight.
The most suitable operating conditions are: 5 ~ 35°C, 30 ~ 80% RH
Do not install in dusty areas, or where water (rainwater) can come in contact with the
Camera.
Keep away from magnets or sound equipment such as speakers; these could negatively
affect image quality or sound transmission.
Do not install in unstable place. Dropping or jarring the camera might cause damage or
render the camera inoperative.
Issues that require special attention during AnyCam use:
The following safety condition issues are to prevent any damage due to mistreatment and
to extend camera life.
Please read the issues carefully and use the camera according to these recommendations.
1) Take the USB cable out when it is not in use for long time.
2) Clean the camera and lens with soft cloth.
Do not touch or wipe the lens with bare hands.
Do not use spray water or the inflammables like benzene or thinner to clean.
3) Do not bend or pull the USB cables with great force.
4) Do not turn part of lens abruptly.
5) Do not leave coffee or drinks near the camera.
6) Do not disassemble, repair, or rebuild the unit.
Contact sales service center or the dealer for repairs.
7) For more detailed information, please visit Samsung Internet site.
http://www.samsunganycam.com or http://www.anycam.co.kr
Program upgrades or installation software can be downloaded from Internet.
Q & A section can be used to get answers or solutions for any problems with the
product.
2
1 Installation Methods
1-1) Windows 98/98SE Installation Method
Unplug all USB devices except the USB keyboard and the USB mouse before you
begin the installation.
Insert the software CD into the CD-ROM drive and the following screen will be
displayed.
Click “SAMSUNG AnyCam Applications” the “Install
Shield Wizard” will guide you.
When you finish the installation, the “AnyCam” icon will
be displayed on the desktop.
Install the other application software as required.
1. Note) If you click PC SnOOp SE, the Install Shield Wizard will install the Indeo
Software first, and then install PC Snoop software automatically. The process will
take a few seconds. Please be patient
Connect SNC-35E to your PC, the window will appear as follows. <FIG 2>
When the above window appears on the screen, click on the ‘Next’ button.<FIG 3>
<FIG 2> <FIG 3>
You have to install a total of Three drivers for AnyCam operation.
Namely, “USB Composite Device;USB AudioDevice’ and ‘SNC-35E Video’
After selecting “
converted to the following window.<FIG 4>
Search for the best driver for your device,” click on ‘Next.’ Then, it will be
When the Figure 4 window appears on the screen, insert the provided CD and select
it by checking on “Specify a location.” Then, specify the location of the driver on the
installation CD by using the ‘Browse’ button.
Device Driver will be installed from:
“D:\Driver\win98”.(D: indicates the CD-ROM drive designation)
3
Loading...