Samsung SNB-8000 User Manual

NETWORK CAMERA

User Manual

SNB-8000/SNV-8080

Network Camera

User Manual

Trademark

The name of thi s product is the reg istered tradema rk of Samsung Techwin C o., Ltd. Other trad emarks mention ed in this manual are th e registered trad emark of their resp ective company.

Restriction

Samsung Techwi n Co., Ltd shall reser ve the copyrigh t of this document. U nder no circumst ances, this docu ment shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.

Disclaimer

Samsung Techwi n makes the best to ver ify the integri ty and correct ness of the conten ts in this document , but no formal guar antee shall be provi ded. Use of this do cument and the subse quent results sha ll be entirely on the u ser’s own responsib ility. Samsung Techwi n reserves the ri ght to change the con tents of this docum ent without prio r notice.

Design and specifications are subject to change without prior notice.

The initi al administra tor ID is “admin” a nd the passwor d should be set wh en logging in for t he first time.

Please ch ange your pass word every thr ee months to saf ely protect p ersonal inf ormation and t o prevent the damage of the information theft. Please, t ake note that it ’s a user’s respo nsibility fo r the securit y and any other pr oblems cause d by mismanaging a password.

is the regist ered logo of Samsun g Techwin Co., Ltd.

overview

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings, Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/ accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lighting storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2”

and rated from 24 Vac (50/60 Hz) min 0.9 A or 12 Vdc, min 0.9 A.

● OVERVIEW

English _3

overview

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance with the installation instructions.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

4_ overview

Class construction

An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection.

Battery

Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Disconnection Device

Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location.

When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed.

CAUTION

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

The CVBS out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes.

Please use the input power with just one camera and other devices must not be connected.

The ITE is to be connected only to PoE networks without routing to the outside plant.

● OVERVIEW

English _5

overview

Please read the following recommended safety precautions carefully.

yDo not place this apparatus on an uneven surface. yDo not install on a surface where it is exposed to direct sunlight, near

heating equipment or heavy cold area. yDo not place this apparatus near conductive material. yDo not attempt to service this apparatus yourself. yDo not place a glass of water on the product. yDo not install near any magnetic sources. yDo not block any ventilation openings. yDo not place heavy items on the product.

User’s Manual is a guidance book for how to use the products.

The meaning of the symbols are shown below.

yReference : In case of providing information for helping of product’s usages yNotice : If there’s any possibility to occur any damages for the goods and

human caused by not following the instruction

 Please read this manual for the safety before using of goods and keep it in

the safe place.

6_ overview

CONTENTS

OVERVIEW

INSTALLATION &

CONNECTION

NETWORK CONNECTION

AND SETUP

3 Important Safety Instructions 9 Product Features 10 Recommended PC Specifications 10 Recommended Micro SD/

SDHC/SDXC Memory Card Specifications

11 NAS recommended specs 11 What’s Included 15 At a Glance (SNB-8000) 18 At a Glance (SNV-8080)

21 Mounting the Lens (SNB-8000) 23 Installation (SNV-8080) 32 Inserting/Removing a Micro SD

Memory Card

34 Memory Card Information

(Not Included)

35 Connecting with other Device

43 Connecting the Camera Directly

to Local Area Networking

44 Connecting the Camera Directly

to a DHCP Based DSL/Cable Modem

45 Connecting the Camera Directly

to a PPPoE Modem

46 Connecting the Camera to a

Broadband Router with the PPPoE/Cable Modem

47 Buttons used in IP Installer 48 Static IP Setup 52 Dynamic IP Setup 53

Port Range Forward (Port Mapping) Setup

55 Connecting to the Camera from a

Shared Local PC

55 Connecting to the Camera from a

Remote PC via the Internet

● OVERVIEW

English _7

overview

WEB VIEWER

SETUP SCREEN

APPENDIX

136

56 Connecting to the Camera 58 Password setting 58 Login 59 Installing STW WebViewer Plugin 61 Using the Live Screen 65 Playing the recorded video

72 Setup 72 Basic Setup 85 Video & Audio setup 101 Network Setup 110 Event Setup 115 NAS (Network Attached Storage)

guide

129 System Setup 135 Viewing profile information

136 Specification 142 Product Overview 144 Troubleshooting 146 Open Source Announcement

8_ overview

PRODUCT FEATURES

• Full HD Video Quality

• Multi-Streaming

This network camera can display videos in different resolutions and qualities simultaneously using different CODECs.

• Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

• Alarm

When an event occurs, video is either sent to the email address registered by the user, sent to the FTP server, saved in a Micro SD card or NAS, or a signal is sent to the alert output terminal.

• Tampering Detection

Detects tempering attempts on video monitoring.

• Motion Detection

Detects motion from the camera’s video input.

• Audio Detection

Detects sound louder than a certain level specified by user.

• Auto Detection of Disconnected Network

Detects network disconnection before triggering an event.

• ONVIF Compliance

This product supports ONVIF Profile-S. For more information, refer to www.onvif.org.

● OVERVIEW

English _9

overview

RECOMMENDED PC SPECIFICATIONS

• CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps)

Intel Core i7 2.8 GHz or higher (for using 1920x1080 60 fps)

Web Plug-in is optimized to SSE 4.1 Instruction Set.

• Resolution : 1280X1024 pixels or higher (32 bit color)

• RAM : 2GB or higher

• Supported OS : Windows XP / VISTA / 7 / 8, MAC OS X 10.7

• Supported Browser : Microsoft Internet Explorer (Ver. 11 ~ 8)

Mozilla Firefox (Ver. 19 ~ 9)

Google Chrome (Ver. 25 ~ 15)

Apple Safari (Ver. 6.0.2(Mac OS X 10.8, 10.7 only), 5.1.7) ※ Mac OS X only

Windows 8 is supported only in the Desktop mode.

Neither a beta test version unlike the version released in the company website nor the developer version will

be supported. For IPv6 connection, Window 7 or higher is recommended.

For Mac OS X, only the Safari browser is supported.

• Video Memory : 256MB or higher

If the driver of the video graphic adapter is not installed properly or is not the latest version, the

video may not be played properly.

For a multi-monitoring system involving at least 2 monitors, the playback performance can be

deteriorated depending on the system.

RECOMMENDED MICRO SD/SDHC/SDXC MEMORY CARD SPECIFICATIONS

• Recommended capacity : 4GB ~ 64GB

• For your camera, we recommend you use a memory card from the following

manufacturers:

Micro SD/SDHC/SDXC Memory Card : Sandisk, Transcend

• For the framerate below 30 fps, it is recommended to use the specification memory card

of Class 6 or higher.

• For the framerate over 31 fps, it is recommended to use the specification memory card of

Class 10 UHS or higher.

10_ overview

NAS RECOMMENDED SPECS

• Recommended capacity : 200GB or higher is recommended.

• Simultaneous access : One unit of NAS can accept a maximum of sixteen camera accesses.

• For this camera, you are recommended to use a NAS with the following manufacturer’s specs.

Recommended products Available sizes

Netgear NAS A maximum of 16 cameras can access simultaneously.

Synology NAS A maximum of 16 cameras can access simultaneously.

When you use Netgear’s NAS equipment, do not allocate the capacity for use.

If you use NAS equipment for purposes other than video saving, the number of accessible

cameras may be reduced.

WHAT’S INCLUDED

Please check if your camera and accessories are all included in the product package.

Appearance Item Name

Camera

Mircro SD

+ -

AC 24V / DC 12V

RESET

VIDEO

Quantity

Description Model Name

SNB-8000 or

SNV-8080

● OVERVIEW

Instruction book, Installer S/W CD

SNB-8000 SNV-8080

English _11

overview

Appearance Item Name

Quick Guide

(Optional)

Warranty card

(Optional)

Cable for the testing

monitor

Power Terminal Block 1 Plugged in the power plug SNV-8080

Template

C Mount Adapter 1

Automatic Iris Lens

Connector

Quantity

Description Model Name

Used to test the camera

connection to a portable display

Product installation guide

Used to install the C Mount

camera lens

Useful for camera lens

installation

device

SNB-8000 SNV-8080

SNV-8080

SNB-8000

12_ overview

Appearance Item Name

Quantity

Description Model Name

6-position Terminal Block 1 Used for alarm in/out terminals SNB-8000

Used for dome cover

L Wrench 1

disassembly, assembly and

camera installation.

CAUTION: Be ware of the Rated Voltage and Polarity

of the power connection.

Power Cable 1 Used to plug into the power port SNV-8080

Audio/alarm cable 1

Cable bush 1

Tapping Screw 3

Used to connect with the

audio and alarm port

Used to connect the LAN cable

with a diameter of Ø7~8.5.

Used for installation on the

wall or ceiling

For fixing a screw,

Plastic Anchor 3

Inserted in a hole

(reinforced anchoring force)

● OVERVIEW

SNV-8080

English _13

overview

Appearance Item Name

Machine Screws 3

Drill bit 1

CS/C Lens

Indoor Buried Housing

Quantity

Options (not included)

Description Model Name

Used for assembling the dome

case when installing the product

on the pipe, wall mount, etc. or

blocking a hole.

Used for dome cover

disassembly, assembly and

camera installation.

Optional lens to be inserted in

Housing for installing indoor

buried type cameras

a camera

SNV-8080

SNB-8000

SNV-8080

14_ overview

AT A GLANCE (SNB-8000)

Front Side

Item Description

Used to fix the camera on a mounting bracket.

The screw size : It is the specification for the screws used to fasten the

Mounting Bracket

Screw Hole

Auto Iris Lens

(Optional)

Auto Iris Lens

Connector

camera to the support. 1/4" - 20 UNC

L : 4.5mm±0.2mm (ISO Standard) or 0.197" (ASA Standard)

Installed on the lens adaptor.

Used to supply power and output signal to control the iris of the lens.

● OVERVIEW

Wipe out a dirty surface of the lens softly with a lens tissue or cloth to which you have applied

ethanol.

Mounting Bracket is not included.

For more information to use mounting bracket, refer to the product’s documentation.

English _15

overview

Rear Side

a b

j i

Item Description

Micro SD Memory

Card Compartment

Audio terminal

Reset Button

Focus Adjustment

Button

Compartment for the Micro SD memory card.

AUDIO OUT Used to connect to speakers.

AUDIO IN Used to connect to a microphone.

The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system.

If you reset the camera, the network settings will be adjusted so that

DHCP can be enabled. If there is no DHCP server in the network, you must run the IP Installer program to change the basic network settings such as IP address, Subnet mask, Gateway, etc., before you can connect to the network.

The button adjusts the focus of image automatically.

c d

16_ overview

Item Description

Lightning protective

grounding port

Power Port Used to plug the power cable.

Network Port Used to connect the PoE or Ethernet cable for network connection.

Alarm I/O Port

Test Monitor Out

SD, Power Indicators

RS-485 port only supports direct connection with pan/tilt driver and external connections of the

RS-485 controller is not supported.

Used to discharge the lightning current safely outside in order to protect the camera.

ALARM IN

ALARM OUT Used to connect the alarm output signal.

GND Used for earth-grounding.

RS-485+ RS-485 Data line

RS-485- RS-485 Data line

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

POWER

Used to connect the alarm input sensor or external day/ night sensor.

ON : A memory card is inserted and operates normally.

Flashing : Failed to record, insufficient space, or inserted

abnormally.

OFF : Camera is off, camera is restarting, memory card is

not in place, or when record is off.

ON : While the power is on

OFF : If the power is off

● OVERVIEW

English _17

overview

AT A GLANCE (SNV-8080)

Appearance

+ -

AC 24V / DC 12V

Item Description

Dome cover

Case cover used to protect the lens and the main unit.

Mircro SD

RESET

VIDEO

Camera Case

18_ overview

Housing part that covers the camera body.

Components

+ -

AC 24V / DC 12V

RESET

VIDEO

b d ec f hg

Item Description

Lens Lens for the camera.

Power Port Port for power terminal block.

Test Monitor Out

Reset Button

Output port for test monitoring the video output. Use the test monitor cable to connect to a mobile display and check the test video.

The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system.

If you reset the camera, the network settings will be adjusted so that

● OVERVIEW

English _19

overview

Item Description

Zoom/Focus Control

Button

Micro SD Memory

Card Compartment

Audio and alarm

cable port

Network Port Used to connect the PoE or Ethernet cable for network connection.

T Zoom in (Tele)

W Zoom out (Wide)

N Focusing on a near object (Near)

F Focusing on a far object (Far)

Focus Control Press this button for automatic focus control.

Compartment for the Micro SD memory card.

Plug in the audio and alarm cable to this port to connect with external alarm device/microphone/speaker.

20_ overview

installation & connection

MOUNTING THE LENS (SNB-8000)

Disconnect the power before proceeding.

The C lens and CS lens are not included in the product package.

It is recommended that megapixel lens are use on this camera to optimise performance.

Mounting the CS lens on a camera

Turn the CS lens clockwise to attach it.

CS Lens

Mounting the C lens on a camera

Turn the C mount adapter included in the product package clockwise and turn the C lens clockwise.

● INSTALLATION & CONNECTION

C Lens

English _21

installation & connection

Connecting the Auto Iris Lens connector

Plug the iris connector of the lens in the camera connecting groove.

Focusing

Select a target to film, turn the zoom lever of the lens to adjust the magnification and then focus the lens so that target is clearly displayed.

After focusing with the zoom lever of the lens, press the [FOCUS] button on the rear of the camera

to adjust the lens even more clearly.

22_ installation & connection

INSTALLATION (SNV-8080)

This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the

external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.

Precautions before installation

Ensure you read out the following instructions before installing the camera:

• It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera including the installation bracket.

• Stuck-in or peeled-off cables can cause damage to the product or a fire.

• For safety purposes, keep anyone else away from the installation site. And put aside personal belongings from the site, just in case.

Disassembling

1. With the provided L-wrench and

drill bit, loosen 3 bolts on the dome cover counter clockwise to remove the cover.

Dome cover

● INSTALLATION & CONNECTION

Bolts

Camera Body

+ -

AC 24V / DC 12V

Camera Case

RESET

VIDEO

English _23

installation & connection

Installation

1. Using the template provided as an accessory,

drill the screw installation hole(diameter of 6mm, minimal depth of 55mm) and firmly insert the plastic anchor provided as an accessory to the end.

2. Fit the bottom hole to the anchor hole and insert

and fix the taping screw (M4.5xL50).

3. Connect and arrange the necessary cables lest

that they should be damaged or twisted while installing the camera.

4. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for

the camera" section. (page 31)

5. Close the dome cover.

`To ensure waterproofing, tight up the fixing bolts using the L-wrench and drill bit.

VIDEO

RESET

AC 24V / DC 12V

VIDEO

+ -

RESET

AC 24V / DC 12V

+ -

24_ installation & connection

Connecting waterproof power cable and LAN cable

1. Remove the dome cover and the case.

2. Pull out the long projected part of the rubber plug on

the bottom and remove it as shown in the figure.

Use an appropriate cable bush for the LAN cable to be

connected.

- Basic camera : Use the cable with a diameter of Ø5~6.5.

- Components provided : Use the cable with a diameter of Ø7~8.5.

3. Insert the power cable into the small hole made by

removing the projected part of the rubber plug in step 2 above, and lay the cable along the long groove.

4. Connect the power cable with the power terminal

block.

● INSTALLATION & CONNECTION

CAUTION: Be ware o f the

Rated Voltage and P olari ty

of the power conne ction .

English _25

installation & connection

5. Insert the LAN cable into the large hole made by

removing the projected part of the rubber plug in step 2 above.

6. Remove the sheath with a cable cutter, and align the

cables.

7. Connect the LAN cable with a LAN connector, and

insert it into the LAN tool.

8. Connect the finished cable to the Ethernet port.

CAUTION: Be ware o f the

Rated Voltage and P olari ty

of the power conne ction .

26_ installation & connection

Connecting alarm cable

1. Remove the dome cover and the case.

2. Pull out the rubber plug on the bottom as shown in

the figure.

3. Insert the alarm cable into the hole made by

removing the rubber plug in step 2, and connect the cable with the PCB alarm terminal.

4. Align the cable so that it should not be damaged or

jammed when installing the camera.

5. Put the rubber plug of the alarm cable into the hole.

6. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera” section.

7. Attach the dome cover.

(page 31)

● INSTALLATION & CONNECTION

English _27

installation & connection

Attaching to the unbundled adapter

Choose and purchase a necessary one of the following options (unbundled) that is suitable to the installation site or for your convenience.

1. Remove the dome cover from the case by referring to the “Disassembling” section. (page 23)

2. Use the provided machine screw to fix the camera case to the unbundled adapter.

3. Connect and arrange the necessary cables lest that they should be damaged or twisted while installing the camera.

4. Install the camera body in the reverse order of “Disassembling”.

5. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera” section. (page 31)

6. Close the dome cover.

`To ensure waterproofing, tight up the fixing bolts using the

L-wrench and drill bit.

Outdoor installation

When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be purchased in stores) so that water does not leak from the gap of the cable connected to the outside.

1. Connect the power, I/O, BNC, and LAN cables.

2. Wrap the black cable jacket (Area A) and the cable connection area with waterproof (butyl rubber) tape so that more than half of the butyl rubber tape is overlapped.

If the cable jacket is not waterproofed properly,

then it can directly cause leakage. Make sure to protect the cable with a dense layer of taping.

Waterproof butyl tape is made of butyl rubber that can be stretched to twice its normal length.

Camera

System

28_ installation & connection

Optional Accessories for Installation

For your easier installation, you can purchase appropriate optional accessories available.

1. WALL MOUNT ADAPTOR(SBP-300WM or

SBP-300WM1)/HANGING MOUNT (SBP-300HM6) This adaptor is used when installing the dome camera onto a wall.

2. CEILING MOUNT ADAPTOR(SBP-300CM)/

HANGING MOUNT(SBP-300HM6) This adaptor is used when installing the dome camera on a concrete ceiling.

● INSTALLATION & CONNECTION

English _29

installation & connection

3. POLE MOUNT ADAPTOR(SBP-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on a pole whose diameter is bigger than 80mm.

4. CORNER MOUNT ADAPTOR (SBP-300KM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on the corner of wall joint.

30_ installation & connection

+ 142 hidden pages