Samsung SM-R800, SM-R805F, SM-R810, SM-R815F User manual
User Manual
SM-R800
SM-R805F
SM-R810
SM-R815F
English. 10/2018. Rev.1.1
www.samsung.com
Table of Contents
Getting Started
6 About the Galaxy Watch
7 Read me first
11 Device layout
11 Package contents
12 Galaxy Watch
15 Wireless charging dock
15 Battery
15 Charging the battery
17 Battery charging tips and
precautions
18 Power saving mode
19 Wearing the Galaxy Watch
19 Putting on the Galaxy Watch
28 Using the Galaxy Watch without a
mobile device
29 Controlling the screen
29 Screen composition
30 Turning the screen on and off
30 Switching the screen
32 Using the bezel
34 Touchscreen
37 Quick panel
45 Lock screen
46 Watch
46 Watch screen
46 Changing the watch face
47 Using the Watch always on feature
48 Watch only mode
20 Band tips and precautions
20 Replacing the band
23 Turning the Galaxy Watch on and
off
24 Connecting the Galaxy Watch to a
mobile device
24 Installing the Galaxy Wearable app
24 Connecting the Galaxy Watch to a
mobile device via Bluetooth
27 Remote connection
48 Notifications
48 Notification panel
49 Viewing incoming notifications
50 Selecting apps for receiving
notifications
50 Entering text
50 Introduction
51 Using the voice input
52 Using emoticons
52 Using handwriting input mode or
the keyboard
2
Table of Contents
Apps and features
54 Messages
56 Phone
56 Introduction
56 Receiving calls
58 Making calls
58 Options during calls
59 Contacts
61 Samsung Pay
62 Samsung Health
62 Introduction
65 Calories
66 Steps
67 Floors
69 Exercise
75 Sleep
76 Heart rate
89 Music
89 Introduction
89 Playing music
89 Importing music
90 Playing music with the Galaxy
Watch
90 Playing music from your mobile
device
91 Playing music without connecting
to a mobile device
91 Reminder
92 Calendar
93 Bixby
93 Introduction
93 Launching Bixby
94 Using Bixby
95 Setting the language
95 Weather
78 Stress
80 Food
82 Water
83 Caffeine
84 Together
84 Settings
85 Additional information
86 GPS
86 Alti-Barometer
95 Alarm
96 World clock
97 Gallery
97 Importing and exporting images
98 Viewing images
98 Deleting images
99 News Briefing
100 Find My Phone
100 Find My Watch
3
Table of Contents
101 SOS messages
103 Email
103 PPT Controller
103 Introduction
103 Connecting your Galaxy Watch to a
computer via Bluetooth
105 Setting the alarm functions
106 Samsung Flow
106 Introduction
106 Connecting devices via Bluetooth
107 Unlocking the computer or tablet
108 Galaxy Apps
108 Settings
108 Introduction
108 Watch faces
109 Sound and vibration
110 Display
110 Advanced
112 Connections
117 Apps
119 Security
120 Account and backup (Account)
120 Accessibility
Galaxy Wearable app
125 Introduction
126 INFO
127 WATCH FACES
128 SETTINGS
128 Notifications
129 Apps
130 Widgets
130 Sound and vibration
131 Display
131 Advanced
132 Add content to your watch
133 Send SOS requests
133 Find My Watch
134 Watch connection
134 Galaxy Apps
134 Samsung Health
134 Samsung Pay
135 SmartThings
135 Mobile networks
135 About watch
137 About Galaxy Wearable
121 General
122 Battery
123 About watch
123 Connect to new phone
124 Connect to phone
4
Table of Contents
Using the Galaxy Watch
138 Introduction
138 Using as a planner
138 Checking out today’s information
140 Managing my daily life
142 Using dual clock when you are
abroad
143 Using a convenient reminder
144 Using as a personal coach for your
health
144 Managing stress and sleep quality
145 Achieving your daily calorie target
146 Experiencing enhanced exercises
147 Using as a simple unlocking device
147 Unlocking your computer quickly
and easily
Appendix
148 Troubleshooting
153 Removing the battery
5
Getting Started
About the Galaxy Watch
The Galaxy Watch is a smartwatch that can analyse your exercise pattern, manage your health
and allows you to use a variety of convenient apps for making phone calls and playing music.
By rotating the bezel, you can access convenient features quickly and easily. You can also
change the watch face to your taste.
Connect your Galaxy Watch to your mobile device to expand your mobile device experience,
or use the Galaxy Watch by itself, without connecting to a mobile device.
6
Getting Started
Read me first
Please read this manual before using this device to ensure safe and proper use.
•
Descriptions are based on the device’s default settings.
•
Some content may differ from your device depending on the region, service provider,
model specifications, or device’s software.
•
Content (high quality content) that requires high CPU and RAM usage will affect the
overall performance of the device. Apps related to the content may not work properly
depending on the device’s specifications and the environment that it is used in.
•
Samsung is not liable for performance issues caused by apps supplied by providers other
than Samsung.
•
Samsung is not liable for performance issues or incompatibilities caused by edited
registry settings or modified operating system software. Attempting to customise the
operating system may cause the Galaxy Watch or apps to work improperly.
•
Software, sound sources, wallpapers, images, and other media provided with this Galaxy
Watch are licensed for limited use. Extracting and using these materials for commercial
or other purposes is an infringement of copyright laws. Users are entirely responsible for
illegal use of media.
•
You may incur additional charges for data services, such as messaging, uploading and
downloading, auto-syncing, or using location services depending on your data plan. For
large data transfers, it is recommended to use the Wi-Fi feature.
•
Default apps that come with the Galaxy Watch are subject to updates and may no longer
be supported without prior notice. If you have questions about an app provided with the
Galaxy Watch, contact a Samsung Service Centre. For user-installed apps, contact service
providers.
•
Modifying the Galaxy Watch’s operating system or installing softwares from unofficial
sources may result in Galaxy Watch malfunctions and data corruption or loss. These
actions are violations of your Samsung licence agreement and will void your warranty.
•
The images in this manual are based on the SM-R800 and SM-R805F models.
•
Some functions may not work as described in this manual depending on the maker and
model of the mobile device you connect to the Galaxy Watch.
•
Depending on the region, you can view the regulatory information on the Galaxy Watch.
(
To view the information, tap
About watch
→
Regulatory info
Settings
.
) on the Galaxy Watch’s Apps screen and tap
7
Getting Started
Maintaining water and dust resistance
Your device supports water- and dust-resistance. Follow these tips carefully to maintain the
water- and dust-resistance of your device. Failure to do so may result in damage to your
device.
•
Do not expose the device to water moving with force.
•
Do not use your device when you dive into the water, snorkel or try any water sports in
fast-flowing water.
•
If the device or your hands are wet, dry them thoroughly before handling the device.
•
If the device is exposed to fresh water, dry it thoroughly with a clean, soft cloth. If the
device is exposed to other liquids, such as salt water, swimming pool water, soapy water,
oil, perfume, sunscreen, hand cleaner, or chemical products such as cosmetics, rinse it
with fresh water and dry it thoroughly with a clean, soft cloth. If you do not follow these
instructions, the device’s performance and appearance may be affected.
•
If the device is dropped or receives an impact, the water- and dust-resistant features of
the device may be damaged.
•
Do not disassemble your device. The water- and dust-resistant features of the device can
be damaged.
•
Do not expose your device to a dramatic change in air temperature or water temperature.
•
Do not dry your device with a heating machine like a hair drier.
•
The water-resistant feature of the device can be damaged in the sauna.
•
Some features such as the touchscreen may not work properly if the device is used in
water.
•
Your device has been tested in a controlled environment and certified to be waterand dust-resistant in specific situations and conditions. (Meets the requirements of
the water-resistance in a 50 m deep water as described by the international standard
ISO 22810:2010 and your device can be used in shallow water. Meets the requirements
of the dust-resistance as described by classification IEC 60529 IP6X.)
8
Getting Started
Precautions for overheating
If you feel discomfort due to overheating while using the device, stop using it immediately
and remove it from your wrist.
To avoid problems, such as device malfunction, skin discomfort or damage, and battery
draining, a warning will appear on the device if it reaches a specific temperature. When the
initial warning appears, all calls, other than emergency calls and other device functions, will
be disabled until the device cools down to a specific temperature.
If the device temperature continues to increase, a second warning will appear. At this time,
the device will shut down. Do not use the device until it cools down to a specific temperature.
However, if you are on an emergency call when the second warning appears, the call will
remain active until you’re finished.
Instructional icons
Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Notice: notes, usage tips, or additional information
Cleaning and managing the Galaxy Watch
Follow the points below to ensure your Galaxy Watch functions correctly and maintains its
appearance. Failure to do so may damage the Galaxy Watch and cause the skin irritation.
•
Prevent the device from being exposed to dust, sweat, ink, oil, and chemical products
such as cosmetics, antibacterial spray, hand cleaner, detergent, and insecticides. The
Galaxy Watch’s exterior and interior parts may be damaged or it could result in poor
performance. If your Galaxy Watch is exposed to any of the previously mentioned
substances, use a lint-free, soft cloth to clean it.
9
Getting Started
•
Do not use soap, cleaning agents, abrasive materials and compressed air when cleaning
your Galaxy Watch and do not clean it with the ultrasonic waves or the external heat
sources. Doing so may damage the Galaxy Watch. Skin irritation may be caused by soap,
detergents hand sanitizers, or cleaning agents left on the Galaxy Watch.
•
Clean your wrist and band after exercising or sweating. Clean the Galaxy Watch with
freshwater, wipe it with a little rubbing alcohol and dry your Galaxy Watch thoroughly.
•
When you remove sun block, lotion, or oil, use a soap-free detergent, then rinse and dry
your Galaxy Watch thoroughly.
•
If the Galaxy Watch gets stained or contains any materials, wipe it with a moistened soft
bristle toothbrush.
Use caution if you are allergic to any materials on the Galaxy Watch
•
Samsung has tested the noxious materials found on the Galaxy Watch through the
internal and external certificate authorities, including the test for all materials which
contact with skin, skin toxicity test, and the Galaxy Watch-wearing test.
•
The Galaxy Watch includes nickel. Take the necessary precautions if your skin is
hypersensitive or you have an allergy to any materials found on the Galaxy Watch.
–
Nickel: The Galaxy Watch contains a small amount of nickel, which is below its
reference point limited by the Europe REACH regulation. You will not be exposed to
the nickel inside the Galaxy Watch and the Galaxy Watch has passed the international
certificated test. However, if you are sensitive to nickel, be careful to use the Galaxy
Watch.
•
Only the materials observed the standards of the U.S Consumer Product Safety
Commission (CPSC), the regulations of the European countries, and other international
standards are used to make a Galaxy Watch.
•
For more information about how Samsung manages chemicals, refer to the Samsung
website (https://www.samsung.com/uk/aboutsamsung/sustainability/environment/).
10
Getting Started
Device layout
Package contents
Refer to the quick start guide for package contents.
•
The bands available may differ by model. Use the proper band which fits in each
model’s size.
•
The items supplied with the Galaxy Watch and any available accessories may vary
depending on the region or service provider.
•
The supplied items are designed only for this Galaxy Watch and may not be
compatible with other devices.
•
Appearances and specifications are subject to change without prior notice.
•
You can purchase additional accessories from your local Samsung retailer. Make
sure they are compatible with the Galaxy Watch before purchase.
•
Except the Galaxy Watch, some accessories, such as docking devices, may not have
the same water- and dust-resistance certification.
•
Use only Samsung-approved accessories. Using unapproved accessories may cause
the performance problems and malfunctions that are not covered by the warranty.
•
Availability of all accessories is subject to change depending entirely on
manufacturing companies. For more information about available accessories, refer
to the Samsung website.
11
Getting Started
SM-R800: GPS antenna
Galaxy Watch
►
SM-R800, SM-R805F
SM-R805F: LTE/GPS antenna
NFC antenna
Touchscreen
Bezel
Light sensor
Pressure vent
Back key
Microphone
Home key (Power
key)
Atmospheric
pressure sensor
12
Heart rate sensor
Speaker
Band
Getting Started
SM-R810: GPS antenna
►
SM-R810, SM-R815F
SM-R815F: LTE/GPS antenna
NFC antenna
Touchscreen
Bezel
Light sensor
Pressure vent
Back key
Microphone
Home key (Power
key)
Atmospheric
pressure sensor
13
Heart rate sensor
Speaker
Band
Getting Started
•
Ensure that the band is kept clean. Contact with contaminants, such as dust and
dye, can cause stains on the band that may not be fully removed.
•
Do not insert sharp objects into the atmospheric pressure sensor, the pressure
vent, speaker, or the microphone. Inner components of the Galaxy Watch may be
damaged along with the water-resistance feature.
•
Connectivity problems and battery drain may occur in the following situations:
•
Make sure the Galaxy Watch’s microphone is not obstructed when you are
speaking into it.
•
The pressure vent ensures that Galaxy Watch’s inner parts and sensors work
–
If you attach metallic stickers on the antenna area of the Galaxy Watch
–
If you cover the Galaxy Watch’s antenna area with your hands or other objects
while using certain features, such as calls or the mobile network connection
correctly when you use the Galaxy Watch in environment where the atmospheric
pressure changes.
Keys
Key Function
•
Press and hold to turn the Galaxy Watch on or off.
•
Press to turn on the screen.
•
Press and hold for more than 7 seconds to restart the
Home/Power
Back
Galaxy Watch.
•
Press to open the Apps screen when you are on the Watch
screen.
•
Press to open the Watch screen when you are on any
other screen.
•
Press to return to the previous screen.
14
Getting Started
Wireless charging dock
Wireless
charging
surface
LED indicator
Do not expose the wireless charging dock to water because the wireless charging
dock does not have same water- and dust- resistance certification as your Galaxy
Watch.
Charger port
Battery
Charging the battery
Charge the battery before using it for the first time or when it has been unused for extended
periods.
Use only Samsung-approved chargers, batteries, and cables. Unapproved chargers or
cables can cause the battery to explode or damage the Galaxy Watch.
•
Use the supplied wireless charging dock and charger. The Galaxy Watch cannot be
charged properly with a third-party charger.
•
Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and be easily accessible while charging.
15
Getting Started
Plug the small end of the charger into the charger port of the wireless charging dock and
1
plug the large end of the charger into an electric socket.
Place the Galaxy Watch into the wireless charging dock aligning the centre of your Galaxy
2
Watch’s back side with the centre of the wireless charging dock.
When you use the Galaxy Watch with the metal band (sold separately), press the
Galaxy Watch’s lower section in the direction of the arrow shown in the figure below
after placing it into the wireless charging dock to connect them properly. If the Galaxy
Watch and the wireless charging dock do not come into contact with each other
properly, the Galaxy Watch may not charge well.
16
Getting Started
Checking the charging status
When you connect the Galaxy Watch and the wireless charging dock, the wireless charging
dock’s LED indicator flashes certain colours to indicate the charging status.
Colour Charging status
Red Charging
Green Fully charged
Orange Connected to a low-power adaptor
When a wireless charging dock error occurs, the LED indicator flashes red. Disconnect
the Galaxy Watch from the wireless charging dock, wait until the LED indicator stops
flashing and reconnect the two. If the error occurs again, contact a Samsung Service
Centre for service support.
Battery charging tips and precautions
•
If there are obstructions between the Galaxy Watch and the wireless charging dock,
the Galaxy Watch may not charge properly. Prevent the Galaxy Watch and the wireless
charger from coming into contact with sweat, liquids, or dust.
•
When the battery power is low, the battery icon appears empty.
•
If the battery is completely discharged, the Galaxy Watch cannot be turned on
immediately when the charger is connected. Allow a depleted battery to charge for a few
minutes before turning on the Galaxy Watch.
•
If you use multiple apps at once, the battery will drain quickly. To avoid losing power
during a data transfer, always use these apps after fully charging the battery.
•
Using a power source other than the charger, such as a computer, may result in a slower
charging speed due to a lower electric current.
•
If the Galaxy Watch is being charged with other devices via a multi charger, charging may
take longer.
•
The Galaxy Watch can be used while it is charging, but it may take longer to fully charge
the battery.
17
Getting Started
•
If the Galaxy Watch receives an unstable power supply while charging, the touchscreen
may not function. If this happens, disconnect the Galaxy Watch from the wireless
charging dock.
•
While charging, the Galaxy Watch may heat up. This is normal and should not affect the
Galaxy Watch’s lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging for your safety. If this happens, continue charging the Galaxy Watch
after allowing it to cool down by removing it from the wireless charging dock.
•
If the Galaxy Watch is not charging properly, take the Galaxy Watch to a Samsung Service
Centre.
•
Avoid using a bent or damaged USB cable. If the USB cable is damaged, stop using it.
Power saving mode
Activate power saving mode to extend the battery’s usage time.
•
Displays colours on the screen as grey tones.
•
Disables all features except emergency call (when using the mobile network model), and
only the notifications from apps that do not need a mobile network connection can be
available. However, phone, messaging, and notifications are available when the Galaxy
Watch is connected to a mobile device via Bluetooth.
•
Deactivates the Wi-Fi network and the mobile network.
•
Limits the performance of the Galaxy Watch’s CPU.
(
On the Apps screen, tap
→ on the quick panel to activate power saving mode. For more information about how
to open the quick panel, refer to Quick panel.
To deactivate this mode, tap
Alternatively, tap
→ on the quick panel to deactivate power saving mode.
Settings
OFF
) →
Battery
at the bottom of the power saving mode screen and tap .
→
Power saving
→ . Alternatively, tap
18
Getting Started
Wearing the Galaxy Watch
Putting on the Galaxy Watch
Open the buckle and place the band around your wrist. Fit the band to your wrist, insert the
pin into an adjustment hole, and then secure the buckle to close it.
Do not bend the band excessively. Doing so may damage the Galaxy Watch.
•
To measure your heart rate more accurately with the Galaxy Watch, wear the
Galaxy Watch firmly around your lower arm just above the wrist. Refer to Wearing
the Galaxy Watch correctly for details.
•
When certain materials come into contact with the back of the Galaxy Watch, your
Galaxy Watch may recognise that you are wearing it on your wrist.
•
If your Galaxy Watch does not register that a motion has occurred for more than
10 minutes, your Galaxy Watch may recognise that you are not wearing it on your
wrist.
19
Getting Started
Band tips and precautions
•
When you wear the Galaxy Watch for a long time or do a high-intensity exercise while
wearing it, skin irritation may occur due to friction and pressure. If you wearing your
Galaxy Watch for a long time, remove the Galaxy Watch from your wrist and do not wear
your Galaxy Watch for several hours.
•
Skin irritation may occur due to an allergy, environment factors, other factors, or when
your skin is exposed to soap or sweat for long periods. In this case, stop using your Galaxy
Watch and wait 2 or 3 days for the symptoms to ease. If the symptoms persist or worsen,
immediately call your doctor.
•
Make sure your skin is dry before wearing your Galaxy Watch. If you wear a wet Galaxy
Watch for a long time, your skin may be affected.
•
If you use your Galaxy Watch in the water, remove foreign materials from your skin and
Galaxy Watch and dry them thoroughly to prevent the skin irritation.
•
Do not use any accessories except the Galaxy Watch in the water.
Replacing the band
Detach the band from the Galaxy Watch to replace it with a new one.
The band’s appearance may vary depending on your model.
Slide the band’s spring bar inwards.
1
20
Getting Started
Pull the band away from the Galaxy Watch’s body.
2
Insert one end of the spring bar into the Galaxy Watch’s lug.
3
21
Getting Started
Slide the spring bar inwards and connect the band.
4
1
2
22
Getting Started
Turning the Galaxy Watch on and off
Press and hold the Home key (Power key) for a few seconds to turn on the Galaxy Watch.
When you turn on the Galaxy Watch for the first time or reset it, on-screen instructions will
appear to download and install the Galaxy Wearable app on your mobile device. Refer to
Connecting the Galaxy Watch to a mobile device for details.
To turn off the Galaxy Watch, press and hold the Home key (Power key), and then tap
.
off
Follow all posted warnings and directions from authorised personnel in areas where
the use of wireless devices is restricted, such as aeroplanes and hospitals.
Power
Restarting the Galaxy Watch
If your Galaxy Watch is frozen and unresponsive, press and hold the Home key (Power key) for
more than 7 seconds to restart it.
23
Getting Started
Connecting the Galaxy Watch to a mobile device
Installing the Galaxy Wearable app
You can use other various features after connecting your Galaxy Watch to a mobile device. To
connect your Galaxy Watch to a mobile device, install the Galaxy Wearable app on the mobile
device.
Depending on your mobile device, you can download the Galaxy Wearable app from the
following places:
•
Samsung Android devices:
•
Other Android devices:
You cannot install the Galaxy Wearable app on the mobile devices that do not
Galaxy Apps, Play Store
Play Store
support Galaxy Watch syncing. Ensure that your mobile device is compatible with a
Galaxy Watch.
Connecting the Galaxy Watch to a mobile device via Bluetooth
Galaxy Watch
Turn on the Galaxy Watch.
1
A screen will appear about downloading and installing the Galaxy Wearable app.
Tap and select a language to use.
2
If you want to use your Galaxy Watch without connecting it to a mobile device, refer
to Using the Galaxy Watch without a mobile device.
Mobile device
Launch
3
If necessary, update the Galaxy Wearable app to the latest version.
Tap
4
Galaxy Wearable
START THE JOURNEY
.
.
24
Getting Started
Select your device on the screen.
5
If you cannot find your device, tap
Tap
6
7
TURN ON
Follow the on-screen instructions to complete the connection.
When completing the connection, an on-screen tutorial will appear on both the Galaxy
Watch’s screen and the mobile device. Follow the on-screen instructions to learn the
Galaxy Watch’s basic controls.
•
Connection methods and screen may vary depending on your mobile device and
when the Bluetooth activation request window appears.
MINE’S NOT HERE
.
software version.
•
The Galaxy Watch is smaller than normal mobile devices so the network quality
may be lower, especially in areas with weak signals or poor reception. When using
your Galaxy Watch without connecting to a mobile device or when a Bluetooth
connection is unavailable, your cellular network or Internet connection may be
poor or become disconnected.
•
When you connect your Galaxy Watch to a mobile device for the first time after
resetting it, the Galaxy Watch’s battery may drain more quickly while syncing data,
such as contacts.
•
Supported mobile devices and features may vary depending on your region,
service provider, and device manufacturer.
25
Getting Started
Activating the Galaxy Watch’s mobile network
You can receive calls and messages on your Galaxy Watch without mobile device, and also
use various other services through the mobile network after activating it.
Begin by connecting your Galaxy Watch to the mobile device. For more information, refer to
Connecting the Galaxy Watch to a mobile device.
•
Check that the service providers of your Galaxy Watch and mobile device are the
same. The connection method may vary depending on the service provider and
region.
•
The mobile device must be connected to a Wi-Fi or mobile network.
•
You can activate the mobile network only when you use a mobile device running
the Android operating system 5.0 or later and with 1.5 GB of RAM or more.
•
If the mobile network cannot be activated properly, contact your service provider.
•
While connecting your Galaxy Watch to the mobile device, activate the mobile network
on the
•
On the Galaxy Watch’s Apps screen, tap (
networks
•
Launch
and then follow the on-screen instructions to complete the connection.
Mobile service for your watch
and follow the on-screen instructions to complete the connection.
Galaxy Wearable
on your mobile device, tap
screen.
Settings
) →
Connections
SETTINGS
→
Mobile
→
Mobile networks
,
26
Getting Started
Connecting the Galaxy Watch to a new mobile device
When you connect the Galaxy Watch to your new mobile device, on-screen instructions
will ask you to reset the Galaxy Watch. Make sure you back up any important data stored in
your Galaxy Watch before connecting your Galaxy Watch to a new mobile device. For more
information about backing up your Galaxy Watch, refer to Backing up and restoring data.
On the Apps screen, tap (
1
The connection between your Galaxy Watch and your mobile device will end. After a light
reset, it will automatically enter Bluetooth pairing mode.
On your new mobile device, launch
2
If the mobile device you want to connect to is already connected to another device,
launch
connect with a new device.
Galaxy Wearable
Settings
on your mobile device and tap →
) →
Connect to new phone
Galaxy Wearable
to connect to your Galaxy Watch.
→ .
Connect new device
Remote connection
Your Galaxy Watch and mobile device are connected via Bluetooth. When a Bluetooth
connection is not available, you can remotely connect the Galaxy Watch to your mobile
device by using your Samsung account via the mobile network or the Wi-Fi network. This
allows you to continue receiving notifications from your mobile device.
to
This feature is automatically activated when you connect to your mobile device via Bluetooth
for the first time.
If this feature is not turned on, launch
→
Watch connection
, and then tap the
Galaxy Wearable
Remote connection
on your mobile device, tap
switch.
SETTINGS
27
Getting Started
Using the Galaxy Watch without a mobile device
You can use the Galaxy Watch without connecting it to a mobile device. Use your Galaxy
Watch conveniently without connecting to a mobile device while doing outdoor activities
such as climbing a mountain or exercise. You can set to use the Galaxy Watch without a
mobile device when you turn on the Galaxy Watch for the first time or you reset it.
•
Some features are not available when you using your Galaxy Watch without
connecting to a mobile device.
•
Visit www.samsung.com to view legal notices provided when setting Without
phone connection mode for the first time.
Turn on the Galaxy Watch.
1
Tap and select a language to use.
2
Tap , scroll down the screen, and tap
3
Check the notice and tap
4
Read the terms and conditions and tap
5
Login with your Samsung account.
6
If you need to restore data, restore another Galaxy Watch’s data stored in your Samsung
7
account.
Connect to the mobile network.
8
This step does not appear when you use the Bluetooth model.
Continue >
.
here
NEXT
.
to agree to them.
Set a time zone.
9
Set a PIN for restoring or backing up data.
10
On the Apps screen, tap (
PIN to connect the Galaxy Watch to a mobile device while using the Galaxy Watch
without a mobile device.
Settings
) →
Connect to phone
28
→ and enter the
Getting Started
Watch
Controlling the screen
Screen composition
The Watch screen is the starting point for accessing all of the Galaxy Watch’s many screens.
You can view other screens by pressing the key, rotating the bezel, or swiping your finger on
the screen.
Notifications
Available widgets, notifications, and their arrangement may vary depending on the
software version.
Widgets Add widgets.
Adding widgets
You can add more widgets on the Home screen.
Scroll left on the screen, tap
panel.
, and select a widget. The selected widget will appear in a new
Moving widgets
Tap and hold a widget and then drag it to the desired location.
Removing widgets
Tap and hold a widget and then tap .
29
Getting Started
View recent apps.
Turning the screen on and off
To turn on the screen, rotate the bezel. Or, press the Home key or the Back key.
If the screen does not turn on after you rotate the bezel, tap
screen, tap
the feature.
To turn off the screen, cover it with your palm. Also, the screen will automatically turn off if the
Galaxy Watch is not used for a specified period.
You can also turn on the screen using the wake-up gesture feature. On the Apps screen, tap
(
Settings
activate it.
Advanced
) →
→
Bezel wake-up
Advanced
→
Wake-up gesture
, and then tap the
and tap the
(
Settings
Bezel wake-up
Wake-up gesture
) on the Apps
switch to activate
switch to
Switching the screen
Switching between the Watch and Apps screen
To open the Apps screen, press the Home key on the Watch screen.
To return to the Watch screen, press the Home key.
An app
Watch screen Apps screen
Apps screen
The Apps screen displays icons for all apps.
To view other panels, rotate the bezel or swipe the screen to the left or right.
The available apps may vary depending on the software version.
30
Loading...