x2560 Pixels,Quad HD Super AMOLED capacitive touch screen
:
GHz Quad
2550
:5V2A,(
:3.5pi4
mAh
:2.7
+1.5
pi,
GHz Quad
AFC
:9V1.67
1.2m
pin
A)
(802.11
a/b/g/n/ac VHT80, MIMO2x2)/NFC
3-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Reference Abbreviate
9.
Reference Abbreviate
AAC
Advanced Audio Coding.
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
:
AVC
BER
BPSK
CA
CDM
C/I
DMB
EN
ES
ETSI
MPEG
PN
PS
QPSK
RS
SI
TDM
TS
Advanced Video Coding.
:
Bit Error Rate
:
Binary Phase Shift Keying
:
Conditional Access
:
Code Division Multiplexing
:
Carrier to Interference
:
Digital Multimedia Broadcasting
:
: European Standard
: Elementary Stream
European Telecommunications Standards Institute
:
Moving Picture Experts Group
:
Pseudo-random Noise
:
Pilot Symbol
:
Quadrature Phase Shift Keying
:
Reed-Solomon
:
Service Information
:
Time Division Multiplexing
:
: Transport Stream
9-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Safety Precautions
1.
Repair Precaution
1-1.
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of
the low margin of error of most testing equipment.
We recommend
Hand-soldering is not recommended, because p rinted circuit boards(PCBs) can be easily
gauge twisted copper wire.
22-
damaged, even with relatively low heat. Never useasoldering iron withapower rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replac
ement parts may not function properly.
1-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discha
rge and can be easily damaged by it. We recommend protecting these components with cond
uctive anti-static bags when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate
static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are
properly connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening
packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments,
such as air-conditioned rooms. Increase the airflow to the working area to decrease the
chance of accidental static electricity discharges.
1-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level
6.
S/W installation
6-1.
Repair
1
6-1-1.
Required items in order to install S/W
Installation program: Downloader Program
SM-G920F Mobile Phone
Data Cable(GH39-01661A)
JIG BOX(GH81-11888A)
JIG Cable(GH81-10952A)
•
Adapter(GH81-11888K)
•
Serial Cable
•
Mobile device specific S/W: Binary files
Settings
※
Connect ANYWAY JIG BOX
with JIG CABLE(Phone to JIG)
or PC to Phone Using Data Cable
(Odin3 v3.10.6.exe)
6-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level1Repair
6-1-2.
S/W Installation Program(Downloader program)
Open up the S/W Installation Program by executing the
Odin3 v3.10.6.exe"
"
6-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level1Repair
Enable the check mark by click on the following options,
.
1
Check Auto Reboot, Re-Partition, and F. Reset Time
-
Check PIT
-
Check BOOTLOADER, PDA, PHONE, and CSC Files
-
*
Note
Odin v3.10 or above" checks MD5 checksum just after file selection.
:"
6-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Enter into Download Mode
.
2
Enter into Download Mode by pressing Volume Down button, Home button and
ON/OFF Button simultaneously followed by pressing Volume up button as
direction of the phone.
Level1Repair
a
6-4
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level1Repair
Connect the device to PC via Data Cable.
.
3
Make sure that the one of communication ports[ID:COM] box is highlighted in
sky blue. The device is now connected with the PC and ready to download the
binary files in it.
6-5
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level1Repair
Start downloading the binary files into the device by clicking Start button on the
.
4
screen. The green colored"PASS!" sign will appear on the upper-left box if the
binary files have been successfully downloaded into the device.
Disconnect the device from the Data cable.
5.
Once the device boots up, you can check the version of the binary file or name
.
6
by pressing the following code in sequence;
*#1234#
You can perform Factory Reset by Settings
6-6
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Accounts
→
Backup and reset
→
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.