samsung SM-G900H Service Manual - Direy-6
7. Level 2 Repair
7-1. Disassembly and Assembly Instructions
7-1-1. Disassembly
1) Disassemble Home key connector protect
1
cover.
2
1) Separate the Home key connector.
※ Caution
1) Be care of scratch and molding damage.
1) Displace the temperature chamber for 30 minute
3
2) Detach the OCTA using Vaccum jig
AIR pressure
5~7 kgf/cm
※ Caution
1) Be care of scratch and molding damage.
2) Be care of damage to the FPCB.
4
1) Unscrew the 3 points.
※ Caution
1) Before disassembling, Use heating chamber.
2) Be care of scratch and molding damage.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
※ Caution
1) Be care of scratch and molding damage.
7-1
Level 2 Repair
5
1) Unscrew the 10 points.
※ Caution
1) Be care of scratch and molding damage.
6
1) Detach the Bracket Assay from Rear.
※ Caution
1) Be care of damage to Connector.
2) It pushes this part at disassembly, and lift it
7
1) Unscrew the 1 points.
2) Disassemble 1 coaxial cable.
1
2
1) Be care of damage to the , SUB PCB Connector,
coaxialcable.
8
1) Separate the PBA from Bracket.
1) Be care of scratch and antenna contact
damage.
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Loading...