Samsung SM-A700H Disassembly & Reassembly
Level
7.
Pre-requisite
7-1.
Tweezers/Disass'y Stick/Screw Driver Anti-statoc Gloves
Repair
2
OCTA Disassembly Holder Anti-static Mat
Acryl Jig Rework Form Glass Absorbers(2ea)
Tape Rework Form Mobile Dryer
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Level2Repair
Parts which must be changed after repair
7-2.
OCTA Form Tape
Bracket Cu Tape
Touch Key Top Tape
7-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Disassembly
7-3.
Level2Repair
1
※ Caution
1) Be care of scratch
1) Put the device in the chamber for
5~10 minutes under 70~80˚C.
2) Detech the OCTA with Disass'y JIG.
1) Unscrew 11 points
2
※ Caution
Be careful not to Damage
3
※ Caution
1) Be Careful not to Damage of PBA
(Must remove the 2nd hook.)
1) Detach the 2 point hooks in order.
2) Disassemble the bracket.
①
②
※ Pull down the bracket.
③
1) Detach the Bracket and REAR
4
※ Caution
Be careful not to Damage
7-3
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’swritten authorization is strictly prohibited.
Loading...