Samsung SIR-S300W, SIR-S310W User Manual

DIRECTV Receiver
Owner’s Manual
For DIRECTV®Receiver Models: SIR-S300W SIR-S310W
Warning! Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any part inside of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Caution: FCC regulations state that any unauthorized changes or modifications to this equipment
may void the user’s authority to operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and fully insert
the plug.
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
Important: One Federal Court has held that unauthorized recording of copyrighted TV programs is
an infringement of U.S. copyright laws.
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
Warning! Important Safety Instructions
Always be careful when using this product. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and
maintaining your DIRECTV®Receiver.
• Read all safety and operating instructions before operating this product.
• Keep the safety and operating instructions for future reference.
• Heed all warnings on the product and in the operating instructions.
• Follow all operating and use instructions.
• Unplug the product from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury.
• Do not use the product where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc.
• Do not place the product on an unstable cart, stand, tripod, bracket, or table where it can fall. A falling product can cause serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer’s instructions when mounting the unit, and use a mounting accessory recommended by the manufacturer. Move the product and cart with care. Quick stops, excessive force, and uneven surfaces can make the unit and cart unsteady and likely to overturn.
• Provide ventilation for the product. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface. Do not place it near a radiator or heat register. If you place the product on a rack or bookcase, ensure that there is adequate ventilation and that you have followed the manufacturer’s instructions for mounting.
• Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. For your safety, this product is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.
• Protect the power cord. Power supply cords should be routed so that they will not be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
• Unplug the product from the wall outlet and disconnect the antenna or cabling during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-line surges.
Warning! Important Safety Instructions
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits. When installing an outside antenna system, be extremely careful to keep from touching the power lines or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the product.
• Ground outdoor antennas. If an outside antenna is connected to the product, be sure the antenna is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
• Do not attempt to service the product yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the product has been exposed to rain or water
- if the product does not operate normally by following the operating instructions
- if the product has been dropped or the cabinet has been damaged
- when the product exhibits a distinct change in performance
• If you make adjustments yourself, adjust only those controls that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal.
• When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit.
• Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in a safe operating condition.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may cause undesired operation.
This satellite receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.
Notice
AAAAtttttttteeeennnnttttiiiioooonn
Telephone Line Interruption
A continuous land-based phone line connection is required for DIRECTV Pay Per View functionality and sports subscriptions. Any calls generated by the DIRECTV Receiver are toll free. These calls are typically made in the middle of the night; your phone is in use for approximately 30 seconds.
Trademark and copyright statements
Samsung is a trademark of Samsung Electronics. ©2003 DIRECTV, Inc. DIRECTV, the Cyclone Design logo and DIRECTV INTERACTIVE are trademarks of DIRECTV, Inc., a unit of Hughes Electronics Corp, and are used with permission. WINK and WINK logo are registered trademarks of WINK Communications Inc. All other trademarks and service marks are the property of their respective owners.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1997 Dolby Laboratories Inc. All rights reserved.
Macrovision Information
This equipment incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology is granted by Macrovision for home and other limited DBS IRD pay per view uses only. Reverse engineering or disassembly is prohibited.
Program Recording Restrictions
Programming may be taped for home viewing only. All other taping is expressly prohibited. Some programming may not be taped. An additional taping fee may be applied. Call your program provider for details.
OOOOwwwwnnnneeeerrrr''''ssss RRRReeeeccccoooorrrrdd
The model and serial numbers are located on the bottom of the DIRECTV Receiver. The number for the Access Card is on the back of the card and on the carton label. The Receiver ID number is on the back of the Receiver. Record these numbers for reference when calling your sales or service representative regarding this product.
Model Number: ____________________________________ Serial Number: ____________________________________ Access Card Number: ______________________________ Receiver ID Number:________________________________
CCCCuuuussssttttoooommmmeeeerrrr SSSSuuuuppppppppoooorrrrtt For DIRECTV
For subscription information, or to resolve problems related to programming, call: DIRECTV at 1-800-DIRECTV (1-800-347-3288) or visit the DIRECTV Web site (DIRECTV.com).
For Installation
To arrange for the installation of your DIRECTV Receiver, call the dealer from whom you purchased your system.
For Hardware
To resolve problems related to this DIRECTV Receiver, call Samsung Customer Support at 1-800-522-2946.
nn
dd
®
Programming
tt
Warranty
SAMSUNG DIRECTV®Satellite Receiver
Limited Warranty To Original Purchaser
This SAMSUNG manufactured product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products are provided on an “AS IS” basis. However, non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer
Warranty
adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
SAMSUNG CUSTOMER SERVICE
400 VALLEY ROAD, SUITE 201, MT ARLINGTON, NJ 07856, TEL: 973-601-6000, F AX: 973-601-6001
1-800-522-2946 and SAMSUNGUSA.COM
061501
Table of Contents
Chapter 1: Getting Started ......................................................................5
Box contents ...................................................................................5
Front panel controls and lights ........................................................7
Back of the DIRECTV
Installing the batteries in the remote control...................................11
Inserting the Access card ...............................................................12
Chapter 2: Setting up and connecting ..................................................13
Jacks and cables ............................................................................13
Before making connections ............................................................15
Choosing a connection ..................................................................16
Connection option A: ................................................................... 17
DIRECTV Receiver to TV with RF cable only
Connection option B: .....................................................................19
DIRECTV Receiver to TV with A/V cables
®
Receiver ......................................................9
Connection option C: ....................................................................21
DIRECTV Receiver to TV and VCR with RF cables only
Connection option D: ....................................................................23
DIRECTV Receiver to TV and VCR with A/V cables
Connection option E: .....................................................................25
DIRECTV Receiver to TV and A/V receiver
Connection option F: .....................................................................27
DIRECTV Receiver to TV with Component Video inputs and digital A/V receiver
Connecting the VCR control cable (model SIR-S310W only)..........29
Turning on the DIRECTV Receiver for the first time........................29
Adjusting the satellite dish..............................................................30
Testing your DIRECTV Receiver ......................................................36
Activating your DIRECTV account..................................................38
Upgrades........................................................................................38
1
Table of Contents
Chapter 3: Watching TV........................................................................39
Remote control overview................................................................39
Changing channels.........................................................................41
Adjusting the volume .....................................................................41
Getting help ...................................................................................41
Getting information on the TV program you are watching.............41
Finding out what’s on: the Guides..................................................45
Searching for programs in the Guide..............................................54
Choosing an alternate audio format for a program.........................57
Changing the User setting..............................................................57
Pay per view programs...................................................................58
Chapter 4: Program reminders and recording timers.............................64
Setting up the VCR control (model SIR-S310W only).....................64
Scheduling program reminders and recording timers......................66
Reviewing and modifying reminders and recording timers..............67
Chapter 5: User profiles.........................................................................70
User profiles basics.........................................................................70
Editing user profile names...............................................................71
Editing channel lists........................................................................73
Setting ratings limits.......................................................................75
Allowing or blocking pay per view purchases.................................81
Setting a pay per view spending limit.............................................82
Setting the screen color and translucency.......................................83
Setting the current user profile.......................................................84
Locking and unlocking your DIRECTV
®
System..............................84
2
Table of Contents
Chapter 6: Settings, preferences, upgrades, and extras.........................86
Reading your mail ..........................................................................86
Setting system preferences.............................................................87
Reviewing and controlling caller ID ................................................95
Setting the Local Time options.......................................................97
Installing a new Access Card ..........................................................99
Viewing important information and a list of features ...................100
supported by your DIRECTV
Viewing information on automatic system upgrades ....................102
Viewing fun system extras............................................................104
Chapter 7: Programming the remote control.......................................105
Programming the remote control..................................................105
Operating a device with your programmed remote control..........106
Code lists......................................................................................107
®
Receiver
3
Table of Contents
Chapter 8: Troubleshooting .................................................................113
Appendix: Specifications......................................................................115
®
Specifications for DIRECTV
Specifications for DIRECTV Receiver model SIR-S300W...............116
Index....................................................................................................117
Receiver model SIR-S310W.............115
4
Chapter 1: Getting started
This chapter tells you everything you need to know before you start setting up and using your DIRECTV
Box contents
Front panel controls and lights
Back of the DIRECTV Receiver
Installing the batteries in the remote control
Inserting the Access Card
Box contents
Welcome! The first step in setting up your DIRECTV Receiver is to unpack the box and familiarize yourself with its contents. This manual covers two models of DIRECTV Receiver: the SIR-S300W and the SIR-S310W
Box contents for the SIR-S300W
If you are missing any items, contact your Samsung dealer.
®
Receiver. It includes information on:
AAA size batteries
RF coaxial cable
5
DIRECTV Receiver (SIR-S300W)
RJ-11
Telephone cord
Access Card
A/V cable
Remote control
Box contents for the SIR-S310W
If you are missing any items, contact your Samsung dealer.
®
DIRECTV
AAA size batteries
Receiver (SIR-S310W)
RJ-11
Telephone cord
RF coaxial cable
S-Video cable
A/V cable
Access Card
Remote control
VCR control cable
6
Chapter 1: Getting started
Front panel controls and lights
Now that you’ve unpacked the box, take a moment to take a look at the buttons and lights on the front of your DIRECTV Receiver.
SIR-S300W
POWER button and light
SIR-S310W
POWER button and light
INFO
Access Card
control sensor
Remote control sensor INFO
door
ArrowsRemote
MenuEXIT
EXIT Arrows
OK
OKMenu
7
Chapter 1: Getting started
POWER Button and light
Push this button to turn your DIRECTV Receiver on or off. The light glows when power is on.
Remote control sensor
Point your remote control at this sensor when operating your receiver.
Access Card door (Model SIR-S300W only)
This door covers the Access Card slot. This slot holds the Access Card (which allows you to view DIRECTV
model SIR-S310W.
®
programming). The Access Card slot is on the rear panel on
INFO
Push this button to display TV program information.
EXIT
Push this button to clear on-screen displays and return to TV program viewing.
MENU
Push this button to display the Main Menu.
Arrows
Push these buttons to navigate left, right, up, or down in the on-screen Guide and menu system.
OK
Push this button to select a highlighted item in the on-screen Guide and menu system.
8
Chapter 1: Getting started
Back of the DIRECTV Receiver
The diagram below illustrates the location of the input and output jacks on the back of the receiver. These illustrations may help you as you set up your DIRECTV Receiver. Step-by-step setup instructions appear in Chapter 2.
Receiver ID
SIR-S300W
SATELLITE IN
Component Out(Y, Pb, Pr video)
SIR-S310W
S-VIDEO Out
Audio Out
Video Out
Video Out
TV OUT
Channel 3/4 switch
Access Card slot
Antenna In
Telephone line
VCR control
Antenna In
Receiver ID
Channel 3/4 switch
SATELLITE IN
9
Audio Out
Digital Audio Out
TV OUT
Telephone lineS-VIDEO Out
Chapter 1: Getting started
Satellite In
The RG-6 cable from the satellite dish connects to this jack.
Antenna In
The cable from an off-air TV antenna (not from the satellite dish) connects to this jack.
Video Out
Using a standard video cable, this jack connects your DIRECTV Receiver to your TV or VCR.
Audio Out
Using standard stereo audio cables, these jacks connect the DIRECTV Receiver to your TV or VCR.
S-Video Out
This jack connects your DIRECTV Receiver to a TV or VCR that accepts S-Video input.
Component Out (Y, Pb, Pr video) (SIR-S310W only)
Using standard A/V cables, these jacks connect your DIRECTV Receiver to a TV or VCR that accepts high-quality (“component”) video input.
Digital audio out (SIR-S310W only)
Using an optical digital audio cable, this jack allows you to connect your DIRECTV Receiver to an audio receiver that accepts optical digital audio input.
TV Out
Using an RF coaxial cable, this jack connects the DIRECTV Receiver to your TV or VCR.
Channel 3/4 switch
This switch sets the channel for viewing the TV Out signal on your TV.
Telephone line
A telephone line connected to this jack allows you to order pay per view programming.
VCR control (SIR-S310W only)
The VCR control cable connects to this jack.
Access Card slot (model SIR-S310W only)
This slot holds the Access Card (which allows you to view DIRECTV
door on the front of model SIR-S300W.
®
programming). The Access Card slot is behind the Access Card
10
Chapter 1: Getting started
Installing the batteries in the remote control
You’ve unpacked the receiver and reviewed its front and back panels. Now it’s time to start setting up. The first step is to install the batteries in your remote control.
1 Unlatch the battery compartment cover
on the back of remote control.
2 Insert 2 AAA batteries as shown,
making sure the + and – ends of each battery line up with the corresponding marks in the battery compartment.
3 Snap the cover back onto the remote
control.
4 Test the remote control to make sure the batteries have been inserted correctly. Press
the DIRECTV button and make sure the button lights up. If it does not light up, check the orientation of the batteries.
Note: Alkaline batteries are strongly recommended for this remote control.
11
Chapter 1: Getting started
Inserting the Access Card
The next step is to insert your Access Card into your receiver. (You will not be able to view DIRECTV®programming unless the Access Card is properly inserted into the DIRECTV Receiver.) For some receivers, the card may already be inserted when you unpack the box.
1 Locate the ACCESS CARD slot.
On model SIR-S300W the slot is located on the front of the DIRECTV Receiver, behind the Access Card door.
On model SIRS310W the slot is located on the back of the DIRECTV Receiver.
2 Insert the Access Card.
Make sure the side with the bar code is facing down, and the arrow is pointing away from you.
The Access Card should only be removed when replacing the card with a new one provided by DIRECTV or your program provider.
Model SIR-S300W
Model SIR-S310W
Access Card
(Top view)
12
Chapter 2: Setting up and connecting
This chapter explains how to setup and start using your DIRECTV®Receiver. Contents include:
Jacks and cables
Before making connections
Choosing a connection
Connection option A: DIRECTV Receiver to TV with RF cable only
Connection option B: DIRECTV Receiver to TV with A/V cables
Connection option C: DIRECTV Receiver to TV and VCR with
RF cables only
Connection option D: DIRECTV Receiver to TV and VCR with A/V cables
Connection option E: DIRECTV Receiver to TV and A/V receiver
Connection option F (SIR-S310W only): DIRECTV Receiver to TV with
Component Video inputs and digital A/V receiver
Connecting the VCR control cable (model SIR-S310W only)
Turning on the DIRECTV Receiver for the first time
Adjusting the satellite dish
Testing your DIRECTV Receiver
Activating the DIRECTV account
DIRECTV
®
service upgrades
Jacks and cables
The illustrations on these pages show the various types of jacks and cables used to connect your DIRECTV Receiver. If you are unfamiliar with these jacks and cables, take a moment to review them before starting the step-by-step connection process.
RF jacks and coaxial cable
The TV OUT RF jack on the DIRECTV Receiver uses a coaxial cable to connect to your TV or VCR. This jack provides monaural sound and a good TV picture. An RF jack is also used for TV antenna connection (IN FROM ANTENNA), and using an RG-6 coaxial cable, for the satellite dish (SATELLITE IN) input connection.
Audio/Video jacks and cables (RCA-type)
Audio/Video jacks and cables provide stereo sound and a better TV picture than RF jacks and cables. Use these jacks and cables to connect your receiver to a TV, VCR, or to other components such as a stereo receiver or amplifier. The audio/video jacks on the back of the receiver and the audio/video cable connectors are color coded (yellow for video, red for right audio, and white for left audio).
13
Telephone jack and cord
The TEL LINE jack and the included telephone cord connect your DIRECTV Receiver to a phone line. If your home does not have RJ-11 type phone jacks, please contact your phone company to get one installed.
A continuous land-based phone line connection is required for DIRECTV View functionality and Sports subscriptions. Any calls generated by the DIRECTV Receiver are toll-free. These calls are typically made in the middle of the night; your phone is in use for approximately 30 seconds.
®
Pay Per
S-Video jack and cable (cable included with model SIR-S310W only)
S-Video cables and jacks are used to connect the DIRECTV Receiver to TVs, VCRs, and other video equipment equipped with S-Video input jacks. S-Video connections provide a high­quality TV picture (better than RCA-type A/V jacks and cables). Unlike the round RCA-type connectors, S-Video connectors must be correctly aligned before you can plug in the cable. (This cable carries the video signal only; use with A/V cables for the audio signal.)
Component video jacks and cables (cable not included, jack on model SIR-S310W only)
The three-cable component video cables and jacks (also referred to as “Y, Pb, Pr”) are used to connect the DIRECTV Receiver to TVs, VCRs, A/V receivers and other video equipment equipped with component video input jacks. Component video connections provide a TV picture superior to S-Video connections. (These cables carry the video signal only; use with A/V cables for the audio signal.)
Optical digital audio jack and cable (cable not included, jack on model SIR-S310W only)
Optical digital jacks and cables use light to send digital audio data to A/V receivers equipped to receive and interpret this data. The uniquely shaped connectors on the jacks and cables must be aligned before you can plug in the cable. (Note that the jacks and cables may be covered by protective caps which you must remove before making the connection.)
VCR control jack and cable (jack and cable included on SIR-S310W only)
The VCR control jack and cable allow your model SIR-S310W DIRECTV Receiver to send signals to your VCR’s remote sensor, giving you the ability to program your VCR to tape programs for you using simple on-screen controls.
14
Chapter 2: Setting up and connecting
Before making connections
The next steps are to determine which connection option you should use and then to make the necessary connections. Before you begin, please note the following important safety and setup tips.
Protect your components from power surges
• Always turn off and unplug your DIRECTV Receiver, TV, and any other components before connecting or disconnecting any of the cables.
Position all cables correctly to avoid audio hum or interference
• After connecting the components, please run the audio/video cables along the side of the TV set, rather than straight down the back of the TV.
• Make sure that all cables are plugged or screwed tightly into their jacks.
• Please make sure that all antennas and cables are properly grounded.
• Whenever possible, route audio and video cables away from power cords.
Protect your components from overheating
• Do not block ventilation holes in the top of the DIRECTV Receiver, or any other components. Make sure to position the components so that air can circulate freely.
• If you are positioning the components in a stand or rack, make sure to allow for proper ventilation.
• Do not stack components.
• If you have a stereo amplifier or receiver as a system component, please place it on the top shelf or top rack so that hot air rising from it will not flow around other components.
Make strong connections
• Make sure you securely connect cables when making connections. When a tight fit makes a secure connection difficult, you can sometimes make it easier by gently twisting the cable-end while pushing it onto the jack. (Important: never twist S-Video or Optical Digital Audio cables — they have specially shaped ends that must be correctly oriented before connecting.)
Avoid cable damage
• Never kink, bend, or twist optical digital audio cables; doing so might break the fragile optical fibers they contain, rendering them unable to carry a signal.
15
Chapter 2: Setting up and connecting
Choosing a connection
Your DIRECTV Receiver supports a variety of connection possibilities to ensure that it is compatible with whatever type of TV, VCR, or A/V receiver you might have. This manual describes six different setup possibilities in detail. The one that is right for you depends on what type of A/V equipment you have in addition to your DIRECTV Receiver. To get the best audio and video possible with your particular set of A/V equipment, use these pages to choose the connection option that most closely matches your situation.
Option A: DIRECTV Receiver to TV with RF cable only
Option A is the most simple setup option. If you are not planning on using a VCR and your TV has no A/V connectors, use this option. (Turn to page 17 now.)
Option B: DIRECTV Receiver to TV with A/V cables
Option B is also for people not planning on using a VCR, but this option improves the sound and video quality by making the connections using A/V cables. If you are not planning to use a VCR, but your TV does have RCA-type A/V input jacks, use connection Option B. (Turn to page 19 now.)
Option C: DIRECTV Receiver to TV and VCR with RF cables only
Option C is the simplest connection option that includes a VCR. If you want to connect your DIRECTV Receiver to a TV and VCR, and your TV or VCR does not have A/V jacks, use connection Option C. (Turn to page 21 now.)
Option D: DIRECTV Receiver to TV and VCR with A/V cables
Option D also allows you to connect the DIRECTV Receiver to a TV and VCR, but Option D provides improved sound and video quality over Option C. If you are planning to connect your DIRECTV Receiver to a TV and VCR which both have A/V jacks,use connection Option D. (Turn to page 23 now.)
Option E: DIRECTV Receiver to TV and A/V receiver
Option E shows you how to connect the DIRECTV Receiver to an A/V system that includes an A/V receiver. If you plan to use an A/V receiver with your DIRECTV Receiver and TV, use connection Option E. (Turn to page 25 now.)
Option F: DIRECTV Receiver to TV with component video inputs and
Digital A/V receiver (SIR-S310W only)
Option F also shows you how to connect the DIRECTV Receiver to an A/V setup that includes a TV and an A/V receiver. In Option F, however, the A/V receiver supports optical digital audio input, and the TV supports component (Y, Pb, Pr) video input. If this matches your situation, use connection Option F. (Turn to page 27 now.)
16
Chapter 2: Setting up and connecting
Connection option A: DIRECTV Receiver to TV with RF cable only
If connection option A best matches your needs, follow these steps:
1 Make sure your TV and DIRECTV Receiver are turned off and unplugged. 2 Connect the RG-6 coaxial cable running from your satellite dish to the
SATELLITE IN jack on the back of your DIRECTV Receiver.
3 Connect the coaxial cable running from your cable TV system or
off-air TV antenna to the IN FROM ANTENNA jack on the back of the DIRECTV Receiver.
4 Connect the supplied phone cord to a telephone wall jack and to the
TEL LINE jack on the back of the DIRECTV Receiver.
5 Connect the supplied coaxial cable to the Antenna In jack on your TV and to
the TV OUT jack on the back of the DIRECTV Receiver.
6 Plug in the power cords for your DIRECTV Receiver and TV.
To watch DIRECTV®programming
To watch DIRECTV®programming, tune your TV to channel 3 or 4 (depending on the position of the CH 3/4 switch on the back of your DIRECTV Receiver). Channel 3 is the default setting.
Next Step
Now turn to page 29 to start using your DIRECTV Receiver.
17
Chapter 2: Setting up and connecting
Note: DIRECTV Receiver model SIR-S310W shown; connections are the same for model SIR-S300W.
18
Chapter 2: Setting up and connecting
Connection option B: DIRECTV Receiver to TV with A/V cables
If connection option B best matches your needs, follow these steps:
1 Make sure your TV and DIRECTV Receiver are turned off and unplugged. 2 Connect the RG-6 coaxial cable running from your satellite dish to the
SATELLITE IN jack on the back of your DIRECTV Receiver.
3 Connect the coaxial cable running from your cable TV system or
off-air TV antenna to the IN FROM ANTENNA jack on the back of the DIRECTV Receiver.
4 Connect the supplied phone cord to a telephone wall jack and to the
TEL LINE jack on the back of the DIRECTV Receiver.
5 Matching like colors, connect the supplied A/V cable to the AUDIO OUT
and VIDEO OUT jacks on the back of the DIRECTV Receiver.
6 Connect the other ends of the A/V cables to the audio and video input jacks
on your TV. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs on your TV (video out to video in, left audio out to left audio in, right audio out to right audio in).
7 (Optional) if your TV has an S-Video input jack, connect one end of an S-
Video cable to the S-VIDEO jack on the back of the DIRECTV Receiver. Connect the other end of this cable to the S-Video In jack on the back of your TV. This step is optional; it provides improved picture quality on some TVs.
8 Plug in the power cords for your DIRECTV Receiver and TV.
To watch DIRECTV®programming
Set your TV to the appropriate input mode. This is a setting on your TV usually controlled by a Video, Input, or Mode button. See the manual for your TV for instructions.
Next Step
Now turn to page 29 to start using your DIRECTV Receiver.
19
Chapter 2: Setting up and connecting
Note: DIRECTV Receiver model SIR-S310W shown; connections are the same for model SIR-S300W.
20
Chapter 2: Setting up and connecting
Connection option C: DIRECTV Receiver to TV and VCR with RF cables only
If connection option C best matches your needs, follow these steps:
1 Make sure your TV, VCR, and DIRECTV Receiver are turned off and
unplugged.
2 Connect the RG-6 coaxial cable running from your satellite dish to the
SATELLITE IN jack on the back of your DIRECTV Receiver.
3 Connect the coaxial cable running from your cable TV system or
off-air TV antenna to the IN FROM ANTENNA jack on the back of the DIRECTV Receiver.
4 Connect the supplied phone cord to a telephone wall jack and to the
TEL LINE jack on the back of the DIRECTV Receiver.
5 Connect one end of the supplied coaxial cable to the TV OUT connector on
the back of the DIRECTV Receiver. Connect the other end of this cable to the Antenna In jack on your VCR.
6 Connect one end of another coaxial cable (not included) to the TV Out RF
jack on the back of your VCR. Connect the other end of this cable to the Antenna In jack on the back of your TV.
7 (Optional, model SIR-S310W only) go to page 29 to hook up the VCR control. 8 Plug in the power cords for your TV, VCR, and DIRECTV Receiver.
To watch DIRECTV®programming
With your VCR in TV mode or powered off, tune your TV to channel 3 or 4 (depending on the position of the CH 3/4 switch on the back of your DIRECTV Receiver). Channel 3 is the default setting. The position of the CH 3/4 switch on your DIRECTV Receiver should match the setting of the similar CH 3/4 switch on your VCR.
Next Step
Now turn to page 29 to start using your DIRECTV Receiver.
21
Chapter 2: Setting up and connecting
Note: DIRECTV Receiver model SIR-S310W shown; connections are the same for model SIR-S300W.
22
Chapter 2: Setting up and connecting
Connection option D: DIRECTV Receiver to TV and VCR with A/V cables
If connection option D best matches your needs, follow these steps:
1
Make sure your TV, VCR, and DIRECTV Receiver are turned off and unplugged.
2 Connect the RG-6 coaxial cable running from your satellite dish to the
SATELLITE IN jack on the back of your DIRECTV Receiver.
3 Connect the coaxial cable running from your cable TV system or
off-air TV antenna to the IN FROM ANTENNA jack on the back of the DIRECTV Receiver.
4 Connect the supplied phone cord to a telephone wall jack and to the
TEL LINE jack on the back of the DIRECTV Receiver.
5 Matching like colors, connect the supplied A/V cables to the AUDIO OUT and
VIDEO OUT jacks on the back of the DIRECTV Receiver.
6 Connect the other ends of these A/V cables to the audio and video input jacks
on your VCR. Be sure to connect the A/V jacks on the DIRECTV Receiver to corresponding inputs on your VCR (video out to video in, left audio out to left audio in, right audio out to right audio in).
7 Matching like colors, connect another set of A/V cables (not included) to the
other set of audio and video output jacks on the back of the DIRECTV Receiver. Connect the other ends of these cables to the audio and video input jacks on your TV. Be sure to connect the outputs on the DIRECTV Receiver to corresponding inputs on your TV.
8 (Optional) if your TV and VCR both have S-Video jacks, you can also make the
S-Video connections shown in the illustration. This step is optional; it provides improved picture quality.
9 (Optional, model SIR-S310W only) go to page 29 to hook up the VCR control. 10 Plug in the power cords for your TV, VCR, and DIRECTV Receiver.
To watch DIRECTV®programming
Set your TV to the appropriate input mode. (This is a setting on your TV usually controlled by a Video, Input, or Mode button. See your TV manual for help.) Also make sure your VCR is turned on.
Next Step
Now turn to page 29 to start using your DIRECTV Receiver.
23
Loading...
+ 96 hidden pages