Samsung SIP007AFS00 User Manual
ARTIK 7 User Manual
Model: SIP007AFS00
1. ARTIK 7 RF PART Circuit Description
1.1 ZIGBEE : EM3587(U10)
The Ember EM3587 is a fully integrated System-on-Chip that integrates a 2.4 GHz, IEEE 802.15.4-
2003-compliant transceiver, 64-bit ARM® Cortex-A53 microprocessor, flash and RAM memory,
and peripherals of use to designers of ZigBee-based systems.
64-bit ARM® Cortex-A53 processors
2.4 GHz IEEE 802.15.4-2003 transceiver & lower MAC
256 or 512 kB flash, with optional read protection
32 or 64 kB RAM memory
AES128 encryption accelerator
Flexible ADC, UART/SPI/TWI serial communications, and general purpose timers
Optional USB serial communications
24 highly configurable GPIOs with Schmitt trigger inputs
1.2 WLAN/BT : BCM43455(U8)
BCM43455 is the combo module for IEEE 802.11 a/b/g/n/ac Wireless LAN and Bluetooth 4.1 + LE
at embedded and mobile applications. Wireless local area network (WLAN) compliant with the
IEEE 802.11 b/g/n specification
WLAN - IEEE 802.11ac Draft compliant
Single-stream spatial multiplexing up to 433.3Mbps data rate
Supports 20, 40, and 80MHz channels with optional SGI (256 QAM modulation)
Full IEEE 802.11 a/b/g/n legacy compatibility with enhanced performance
Tx/Rx low-density parity check (LDPC) support for improved range and power efficiency
Bluetooth – Bluetooth 4.1 + Low Energy
Bluetooth Class 1 or Class 2 transmitter operation
Supports extened synchronous connections(eSCO), for enhanced voice quality by allowing for retransmission
of dropped packets
FM unit supports HCI for communication.
FM receiver : 65MHz to 108 MHz FM band;supports the European radio data systems(RDS) and the North
Description
Frequency
2412 ~ 2472 MHz
DFS attestations
Client without radar detection capability
Frequency tolerance
802.11 b / g / n : ± 20 ppm
IEEE802.11 mode
b / g / n
Data rate
up to 300 Mbps defined by the IEEE 802.11 b/g/n
Channel Bandwidth
20MHz, 40MHz
DFS channel
Not Support
Ad-hoc/WiFi direct
Not Support
WiFi display
Not Support
Data Modulation
DSSS : CCK, BPSK, QPSK for 802.11b
OFDM : BPSK, QPSK,16QAM, 64QAM for 802.11g/n
Description
Frequency
5150 ~ 5350MHz, 5470~5825MHz
DFS attestations
Client without radar detection capability
Frequency tolerance
802.11 a / n /ac : ± 20 ppm
IEEE802.11 mode
a / n / ac
Data rate
up to 867 Mbps defined by the IEEE 802.11 a/n/ac
Channel Bandwidth
20MHz, 40MHz, 80MHz
Scan behavior
Not mentioned
DFS channel
Use DFS range, No ability of radar detection
Ad-hoc/WiFi direct
Not Support
WiFi display
Not Support
Data Modulation
OFDM : BPSK, QPSK,16QAM, 64QAM, 256QAM for 802.11a/n/ac
American radio broadcast data system(RBDS) standards.
(1) Description for 2.4GHz
(2) Description for 5GHz
(3) Description for Bluetooth
Description
Frequency
2402~2480
Power Class
Class 1 or 2
Bluetooth Standard
Bluetooth 4.1 + EDR
Data rate
up to 3Mbps defined by the Enhanced Data Rate
Data Modulation
FHSS : GFSK, OQPSK, 8DPSK, π /4DPSK for Bluetooth
2. ARTIK 7 Baseband Circuit Description
2.1 AP : S5P6818(U1)
Nexell S5P6818 is a system-on-a-chip (SoC) based on the 64-bit RISC processor for Smartphone
tablet, laptop, and desktop PCs. Designed with the 28 nm low power process, Nexell S5P6818
provides the best performance features such as CORTEX-A53 Octa core CPU, highest memory
bandwidth, Full HD display, 1080p 60 fps (frames per second) video decoding and 1080p 30
frame encoding hardware, 3D graphics hardware and high-speed interfaces such as eMMC4.5,
and USB 2.0.
ARM Cortex-A53 Octa CPU as high performance processor
- 64KB RAM, 20KB ROM and 512KB L2 Cache
Supports ARM TrustZone technology
Supports Security functions (AES, DES/TDES, SHA-1, MD5 and PRNG) and Secure JTAG
High Performance 3D Graphic Accelerator
Supports Dual Display up to 1920x1080, TFT-LCD, LVDS, HDMI 1.4a, MIPI-DSI and CVBS output
Supports various boot modes including NAND (with ECC detection and correction), SPI Flash/EEPROM,
NOR, SD(eMMC), USB and UART
2.2 Memory : KLM4G1FEPD-B031 (U2)
The Samsung KLM4G1FEPD-B031 is a 4 GB eMMC flash memory
embedded MultiMediaCard Ver. 5.0 compatible. Detail description is referenced by JEDEC Standard
SAMSUNG eMMC supports features of eMMC5.0 which are defined in JEDEC Standard
- Supported Features : Packed command, Cache, Discard, Sanitize, Power Off Notification, Data Tag,
Partition types, Context ID, Real Time Clock, Dynamic Device Capacity, HS200, HS400,Field Firmware
Update
Loading...