Samsung SID-500 User Manual
High Resolution
10X Zoom
SALES NETWORK
•
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8139 FAX : +82-31-740-8145
•
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
www.samsungtechwin.com
www.samsungcctv.com
•
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
P/No. : Z6806-0745-01B
VAN 06. 07
High Resolution Day & Night 10X Dome Camera SID-500 User’s Manual
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
ENGLISH
Before operating the camera, confirm the camera model and proper input power
voltage. In order to that you can understand this manual thoroughly, we'll introduce
our model description.
■ SID-500 SERIES
•NTSC MODEL •PAL MODEL
SID-500N SID-500P
■ MODEL DESCRIPTION
• SID-500X
_
SIGNAL SYSTEM
• SIGNAL SYSTEM
NTSC MODEL
N
PAL MODEL
P
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION-This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING -Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
WARNING -To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Features
A/F 10x Optical Zoom
The built-in SID-500 optical zoom lens is a
highly durable component. It features auto
focus, auto iris, and zoom functions.
SSNR (Samsung Super Noise
Reduction)
By using built-in SSNR function manufactured
by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly
reduced, and the signal-to-noise ratio(S/N)
as well as horizontal resolution have been
improved, resulting in a clear and sharp
image display even in the dark.
High Sensitivity
The built-in high sensitivity COLOR CCD
enables a clear image even in
0.005Lux(Sens-up,color) or lower
illumination.
Day & Night
The camera automatically determines whether
it is night time or day time, selecting operating
mode automatically. The camera operates in
color mode during day light conditions and BW
mode in night conditions for clearer identification.
3-Axis camera mechanism
The SID-500 is especially incredibly flexible to
install with its 3-axis camera construction,
which makes the camera wall or slope
mountable.
RS-485 Function
The camera, using a RS-485 communication
can remote control relate to ZOOM/FOCUS
and OSD menu functions.
Sub Monitor Function
The sub monitor function enables easy
adjustment of the camera angle within the
monitoring range during its installation.
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.
Warnings & Cautions
This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.
Warning/Attention/Special Mark Messages
Ignoring this information may result in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Indicates “No Disassembling.”
Indicates
Must Observe.
High Resolution
Featuring 500TV line horizontal resolution in
color mode and 570TV line horizontal resolution
in BW mode, the camera features Sony's
410,000 pixel CCD and captures clean,
noiseless, high-quality images.
Miscellaneous Functions
Other miscellaneous functions of the camera
include privacy zone masking, digital zoom,
line lock synchronization (INT/LL), freeze,
horizontal inversion, and user-configured
presets.
Contents
Precautions
Components and Accessories
Overview
Installation
Installation
Adjust the panning and tilting, rotating while watching the monitor
Connection
Connecting To Monitor
Connecting To Power
RS-485 communication control
8
10
11
13
13
15
16
16
17
18
Operating Your Camera
Menu Configuration
Menu Setup
• CAM TITLE
• WHITE BALANCE
• BACKLIGHT
• MOTION DETECTION
• FOCUS
• EXPOSURE
• SPECIAL
• RESET
• EXIT
Troubleshooting
Specification
Dimension
19
19
20
21
24
25
26
27
31
36
41
41
42
43
45
Precautions
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between
-10˚C and +50˚C. Be especially careful
to provide ventilation when operating
under high temperatures.
Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not install or use the camera in an
environment where the humidity is high.
It can cause the image quality to be
poor.
Do not touch the front lens of the
camera.
It is one of the most important parts
of the camera. Be careful not to be
stained by fingerprint.
Do not drop the camera or subject
them to physical shocks.
It can cause malfunctions to occur.
Never keep the camera face to
strong light directly.
It can damage the CCD.
Do not expose the camera to
radioactivity.
If it is exposed to radioactivity, For
heated CCD, it will be out of order.
Notes
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
• Please check that the power satisfies the normal specification before connecting
the camera.
COLOR CCD CAMERA User’s Manual
8
COLOR CCD CAMERA User’s Manual
9
Components and Accessories
1. SID-500
2. Instruction Manual
4. M4 Tapping Screw 4EA
5. M4 Machine Screw 4EA
6. Adapter plate
Overview
7. Installation Video Output Cable
COLOR CCD CAMERA User’s Manual
10
COLOR CCD CAMERA User’s Manual
11
Overview
Installation
Pan Base
control panning angle of camera
Rotate Base Holding Screw
fix rotated position
Rotate Base
control rotating angle of camera
Pan Base Holding Screws (Color : Silver)
fix panned position
Auto Focus 10x ZOOM Lens Module.
SET button
To access the main setup menu. Pressing the “SET” button locks the zoom control
functions of these buttons and prompts the main setup menu.
RIGHT (F-FAR button)
To move the arrow indicator to right. (To see a far object clearly)
LEFT (F-NEAR button)
To move the arrow indicator to left. (To see a near object clearly)
UP (WIDE button)
To move the arrow indicator to up.(To widen the view : ZOOM OUT)
DOWN (TELE button)
To move the arrow indicator to down (To close in on a far object: ZOOM IN)
AF button
To activate auto focus just once.
Video Output Terminal to Monitor
RS-485 Control Cable : The detailed description refers to p18
Power Input Jack
Video Output Jack
Dome Cover
Shield Case
Notes
• The zoom postion is saved after 5 seconds when you set zoom function.
Installation
Notes
• The installation should be done by qualified service personnel or sysytem installers.
• If the ceiling material is not strong enough to hold the installation screws, the camera may
fall off. Reinforce the ceiling as needed.
1) Remove the dome cover and shield case from the main body by loosening the
three dome cover screws.
* To install the dome cover on the camera
body, turn the latches in locking direction
as shown in the figure 1.
Latch
Locking direction
[Figure-1]
Unlocking direction
(Counterclockwise)
2) And then remove the main body from mounting bracket by the four main
body screws.
Mounting Bracket
Main Body
(Camera)
Shield Case
Locking direction
(Clockwise)
Dome cover
COLOR CCD CAMERA User’s Manual
12
COLOR CCD CAMERA User’s Manual
13
Installation
When installing on a adapter plate
1) Place the bracket provided on the
An arrow for installing directions
adapter plate
M4 tapping screw
(provided)
CAMERA
Unlocking
direction
Dome cover
Notes
• Please locate an arrow on bracket for installing direction that you wish to
observe Area and then fix it with the M4 tapping screws.
installation surface and fix it with the M4
tapping screws (provided).
(Select either 85X85 or 83.5X46)
2) When placing the camera body on the
plate, insert the plate pin into the
mounting hole on the body as shown in
figure-1 and fix it by turning clockwise.
3) When placing the camera body on the
plate, make sure the power and the BNC
cables pass through their respective
designated holes.(When placing the cable
through its side, thread it through the hole
at the bottom.)
4) After installation and adjustment of the
camera are complete, secure the dome
cover by turning it clockwise.
Locking
direction
Unlocking direction
Plate pin
[Figure-1]
Locking direction
Adjust the panning and tilting, rotating while watching the monitor
73˚
145˚ 195˚
170˚
Tilt Base
Rotate Base
Pan Base
-170˚
1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
• Pan Base moves by 170˚ to each side direction and 340˚ on the whole.
• Tilt Base covers total 146˚ angle(73˚ to each side).
• Angle range of Rotate Base is the same as that of Pan Base. But One side range is 195˚
and another is 145˚.
2) Methods of adjustment
•The case of wall installation
After mounting the camera on a wall, adjusting the panning angle so that the camera can
face the direction to monitor when tilting.
And then adjust the tilting angle by rotating the tilt base.
Loosen the rotate base hold screw and adjust rotate base for the best monitoring.
Tighten the rotate base hold screw.
•The case of ceiling installation
After mounting the camera on a ceiling, adjusting the panning angle for better monitoring
area by rotating the pan base.
And then adjust the tilting angle by rotating the tilt base.
COLOR CCD CAMERA User’s Manual
14
COLOR CCD CAMERA User’s Manual
15
Loading...