Samsung SID-452 User Manual
SALES NETWORK
•
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
•
SAMSUNG OPTO-ELECTRONICS AMERICA,INC.
ELECTRONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
TEL : +1-201-902-0347 FAX : +1-201-902-0429
•
SAMSUNG TECHWIN MOSCOW OFFICE
Korp 14, 37-A, PR-KT, Lenningradsky, Moscow 125167, Russia
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297
www.samsungtechwin.com
www.samsungcctv.com
•
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
•
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
P/No. :6806-0701-01A
VAN 06. 02
HIGH RESOLUTION DAY&NIGHT
THREE-AXIS V/F LENS DOME CAMERA
INSTRUCTION MANUAL
SID-452
About this manual
Please read this manual carefully before installing and using the camera. Be sure to keep the manual handy for later reference.
Thank you for purchasing a SAMSUNG DOME CAMERA.
Before operating the camera, confirm the camera model and proper input
power voltage. In order to that you can understand this manual thoroughly,
we'll introduce our model description.
SID-452 SERIES
• NTSC MODELS •PAL MODELS
SID-452N SID-452P
MODEL DESCRIPTION
• SID-452X
_
SIGNAL SYSTEM
• SIGNAL SYSTEM
N --> NTSC MODEL
P --> PAL MODEL
• POWER SOURCE
DC12V/ AC 24V Compatible
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
(Waste Electrical & Electronic Equipment)
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
INFORMATION-This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
WARNING : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Contents
Features
Precautions
Composition
Name and Function of Each Section
Installation
Installation
Adjust the panning and tilting, rotating while watching the monitor
Adjusting varifocal lens zoom and focus
Connecting to a Monitor
Connecting to Power
6
8
10
11
13
13
15
17
18
19
Camera Operation
Menu
Settings
• LENS (Adjusting to the brightness level)
• SHUTTER (condition and speed control)
• WHITE BALANCE control
• BACKLIGHT (Backlight Compensation)
• AGC (Auto Gain Control)
• SSNR (Samsung Super Noise reduction)
• SENS-UP
• SPECIAL
• EXIT
Troubleshooting
Specification
Dimention
20
20
21
22
23
24
25
26
27
28
29
34
35
37
38
COLOR DOME CAMERACOLOR DOME CAMERA User’s ManualUser’s Manual
54
Features
Warning
Built-in Auto Iris Vari-Focal Lens.
The focal length of lens is 3 to 9 mm(F 1.2),
Equivalent to 3X zoom. The built-in lens allow
the camera to have wider dynamic range,
therefore you can use in various applications.
Horizontal Resolution 530 TV Lines
Clear image quality has been achieved by
employing a CCD with 410,000 pixel(NTSC),
470,000 pixel(PAL), which provides a
horizontal resolution of 530 TV lines.
Electronic DAY & NIGHT
This camera has a function that electronically
selects the mode that is appropriate for daytime
or night-time conditions. The COLOR mode
operates in daytime conditions to provide
optimum colors, and BW mode operates in
night-time conditions to enhance the definition
of the image.
PRIVACY Function
The PRIVACY function conceals the areas
you do not wish to appear on the screen.
IP66 Approved/ Dust and Rain
Resistant
With dust and rain resistant design, the
camera can be installed outside under building
eaves or places thatare exposed to the dust
and rain.
High Sensitivity
The built-in high sensitivity COLOR CCD enables
a clear image even in 0.002Lux (Sens-Up)
illumination.
SSNR (Samsung Super Noise
Reduction)
By using built-in SSNR function manufactured
by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly
reduced, and the signal-to-noise ratio (S/N)
as well as horizontal resolution have been
improved, resulting in a clear and sharp
image display even in the dark.
Controlled by OSD Menu
The camera can be controlled by selecting
text displayed on the monitor screen.
Sub Monitor Function
The sub monitor function enables easy
adjustment of the camera angle within the
monitoring range during its installation.
Additional Functions
SENS-UP, MOTION DETECTION, MIRROR,
SHARPNESS and SYNC(INT/LL) functions
are also available.
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you find a malfunction.
If you use your camera around smoke or unusual heat for a long time, a fire
may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not handle the camera with wet hands
It could cause an electric shock.
Do not disassemble the camera.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.
COLOR DOME CAMERA User’s Manual
6
COLOR DOME CAMERA User’s Manual
7
Precautions
Installation of the camera should be
performed by qualified service personnel only.
As installation of the camera requires experience and
It may result in fire.
skill, installation without the assistance of qualified
service personnel may result in a risk of fire or electric
shock. Contact our agency for installation.
Do not install the camera in a wet place
or a place that is exposed to fuel or gas.
It may result in malfunction, an electric
It may fall.
shock or fire.
Do not touch the power plug with wet
hands.
It may result in an electric shock.
It may result in malfunction and fire.
Stop use immediately if smoke or
unusual heat is detected in the camera.
Do not install the camera in an
unstable location.
Do not attempt to disassemble it, or
place any foreign objects inside it.
Do not install the camera in locations
subject to extreme temperature conditions.
Only use the camera in conditions where
temperatures are between -10°C and
Do not install the camera in
unstable lighting conditions.
Severe changes in lighting, or flickering,
can cause the camera to work incorrectly.
+50°C. Be especially careful to provide
ventilation when operating in high
temperatures.
Do not drop the camera or
subject it to physical shock.
It can cause malfunctions to occur.
Never face the camera directly
into strong light.
Never face the camera directly into
strong light.
It can damage the CCD.
Notes
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
• Please check that the power satisfies the normal specification before connecting
the camera.
COLOR DOME CAMERACOLOR DOME CAMERA User’s ManualUser’s Manual
98
Composition
1. SID-452
2. Instruction Manual
3. M4 Tapping Screws 4EA
4. M4 Machine Screws 4EA
5. Adapter plate
Name and Function of Each Section
Pan Base
control panning angle of camera
Rotate Base Holding Screw
fix rotated position
Rotate Base
control rotating angle of camera
COLOR DOME CAMERACOLOR DOME CAMERA User’s ManualUser’s Manual
1110
Loading...