All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
2011 Samsung Telecommunications America, LLC. Samsung is a registered trademark of Samsung Electronics Co., Ltd.
http://www.samsung.com
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
1.888.987.HELP (4357)
T989_UG_English_UVKK7_PS_121311_F9
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, from the Home screen, locate the DivX VOD section (tap
Legal information > License settings > DivX® VOD > Register
) in your device setup menu. Go to
Applications > Settings > About phone >
vod.divx.com
for more information on how to
complete your registration.
®
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open
source licenses, please visit:
http://opensource.samsung.com
.
Dynamic Noise Suppression from Audience
Your phone is equipped with an advanced voice processing chip that delivers clear mobile calls by suppressing background noise,
intermittent sounds (like a siren or nearby conversation), and echoes, allowing you to hear and be heard nearly anywhere.
How Does It Work?
Based on the intelligence of the human hearing system, the technology:
•
Captures, evaluates and distinguishes all the sound signals surrounding your phone, and the person you're speaking with.
•
Then isolates the primary voice in conversation and filters out the background noise - so the person you're calling hears only your voice, without
disturbing background noise.
•
Dynamically equalizes and adjusts voice volume to optimize your calling experience, so you can hear clearly and don't need to speak louder to overcome
surrounding noise.
The noise suppression technology is built-in and already enabled in your new mobile phone. So it's ready to provide unsurpassed voice
clarity with every call.
Disclaimer of Warranties; Exclusion of Liability,
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
SAMSUNG IS NOT LIABLE FOR PERFORMANCE ISSUES OR INCOMPATIBILITIES CAUSED BY YOUR EDITING OF REGISTRY SETTINGS, OR
YOUR MODIFICATION OF OPERATING SYSTEM SOFTWARE.
USING CUSTOM OPERATING SYSTEM SOFTWARE MAY CAUSE YOUR DEVICE AND APPLICATIONS TO WORK IMPROPERLY.
Table of Contents
Section 1: Getting Started ..............................................6
End User License Agreement for Software . . . . . . . . . . . . . . 264
Index ............................................................................269
5
Section 1: Getting Started
This section explains how to get started with your phone by
installing and charging the battery, installing the SIM card and
optional memory card, and setting up your voice mail.
Before using your phone for the first time, you’ll need to install
and charge the battery and install the SIM card. The SIM card is
loaded with your subscription details, such as your PIN, available
optional services, and many other features. If desired, you can
also install an SD card to store media for use with your phone.
Understanding this User Manual
The sections of this manual generally follow the features of your
phone. A robust index for features begins on page 269.
Also included is important safety information that you should
know before using your phone. This information is available near
the back of the guide, beginning on page 239.
This manual provides navigation instructions according to the
default display settings. If you select other settings, navigation
may be different.
Unless otherwise specified, all instructions in this manual
assume you are starting from the Home screen and using the
available keys.
Note:
Instructions in this manual are based on default settings, and may vary
from your phone, depending on the software version on your phone,
and any changes to the phone’s Settings.
Unless stated otherwise, instructions in this User Manual start with the
phone unlocked, at the Home screen.
All screen images in this manual are simulated. Actual displays may
vary, depending on the software version of your phone and any
changes to the phone’s Settings.
Special Text
Throughout this manual, you’ll find text that is set apart from the
rest. These are intended to point out important information, share
quick methods for activating features, to define terms, and more.
The definitions for these methods are as follows:
•
Notes
: Presents alternative options for the current feature, menu, or
sub-menu.
•
Tips
: Provides quick or innovative methods, or useful shortcuts.
•
Important
: Points out important information about the current feature
that could affect performance.
•
Warning
: Brings to your attention important information to prevent
loss of data or functionality, or even prevent damage to your phone.
Getting Started 6
Text Conventions
Release Latch
This manual provides condensed information about how to use
your phone. To make this possible, the following text conventions
are used to represent often-used steps:
➔
Arrows are used to represent the sequence of
selecting successive options in longer, or
repetitive, procedures.
Example:
“From the Home screen, press (
and network ➔ Bluetooth settings
Menu
.
Battery Cover
The battery, SIM card and SD card are installed under the
battery cover.
Important!:
Before removing or replacing the battery cover, make sure
the phone is switched off. To turn the phone off, hold down
the key until the power-off image displays, then tap
Power off
.
To remove the battery cover:
1. Hold the device firmly and locate the cover release latch.
7
) ➔
Settings ➔ Wireless
2. Place your fingernail in the opening and firmly “pop” the
cover off the device (similar to a soda can).
To replace the battery cover:
䊳
Position the battery cover over the battery compartment
and press down until you hear a click.
SIM Card Overview
Important!:
Before removing or replacing the SIM card, make sure the
phone is switched off. To turn the phone off, hold down
the key until the power-off image displays, then tap
Power off
.
The SIM card is loaded with your subscription details such as
your telephone number, PIN, available optional services, and
many other features.
Important!:
The SIM card and its information can be easily damaged by
scratching or bending, so be careful when handling, inserting, or
removing the card. Keep all SIM cards out of reach of small
children.
If available, you can remove the previous SIM and replace it with
the new ISIM card.
Installing and Removing the SIM card
To install the SIM card:
1. Carefully slide the SIM card into the SIM card socket until
the card clicks into place.
2. Make sure that the card’s gold contacts face into the
phone and that the upper-left angled corner of the card is
positioned as shown.
Correct
Some features on your device (such as Wi-Fi Calling) can be
unlocked by using a new ISIM (IP Multimedia Services Identity
Module) card. To use this new ISIM card, call or contact T-Mobile
customer service for more information.
This card contains the necessary information for identifying and
authenticating the user to the IMS (IP Multimedia Subsystem).
Incorrect
Getting Started 8
To remove the SIM card:
Correct
Incorrect
1. Remove the battery cover.
2. Carefully place your fingernail into the end of the SIM slot
and push the card slightly out.
3. Carefully slide the SIM card out of the SIM card socket.
Note:
If the card is not inserted correctly, the phone will not detect it and no
service will be available. If this happens, turn off the phone, remove
the card, and reinstall the card in the correct orientation.
Installing the microSD Memory Card
Your phone supports an optional (external) microSD™ or
microSDHC™ memory card for storage of media such as music,
pictures, video and other files. The SD card is designed for use
with this mobile phone and other devices.
Note:
microSD memory cards include capacities of up to 2GB.
microSDHC™ memory card types can range from 4GB to up to 32GB.
Note:
This device supports up to a 32GB microSDHC memory card.
Since the device comes with 16GB of built-in memory, its maximum
total storage capacity is 48GB.
1. Remove the battery cover.
2. Locate the microSD card slot on the inside of the phone.
9
3. Orient the card with the gold strips facing down.
4. Firmly press the card into the slot and make sure that it
catches with the push-click insertion. For more information
on how to use the SD card see “Using the SD Card” on
page 51.
Important!:
Be sure to align the gold contact pins on the card with the
phone’s contacts.
Removing the microSD Memory Card
Installing Battery
Removing Battery
1. Remove the battery cover.
2. Firmly press the card into the slot and release it. The card
should pop partially out of the slot.
3. Remove the card from the slot.
4. Replace the battery cover.
Battery
Before using your phone for the first time, install the battery and
charge it fully.
Important!:
Before removing or replacing the battery, make sure the
phone is switched off. To turn the phone off, hold down
the key until the power-off image displays, then tap
Power off
.
Installing the Battery
1. Slide the battery into the compartment (1) so that the tabs
on the end align with the slots at the bottom of the phone,
making sure the connectors align.
2. Gently press down to secure the battery (2).
Removing the Battery
䊳
Grip the battery at the top end (3) and lift it up and out of
the battery compartment (4).
Getting Started 10
Charging the Battery
Correct
Incorrect
Charging Head
USB Cable
Your phone is powered by a rechargeable Li-ion battery. A wall
charger, which is used for charging the battery, is included with
your phone. Use only approved batteries and chargers. Ask your
local Samsung dealer for further details.
Before using your phone for the first time, you must fully charge
the battery. A discharged battery recharges fully in approximately
4 hours.
11
Note:
Verify that the battery is installed prior to connecting the wall charger.
If both the wall charger is connected and the battery is not installed,
the handset will power cycle continuously and prevent proper
operation. Failure to unplug the wall charger before you remove the
battery, can cause the phone to become damaged.
Important!:
It is recommended you fully charge the battery before using your
device for the first time.
1. Connect the USB cable to the charging head.
2. Locate the Charger/Accessory jack (1).
3. Insert the USB cable into the device’s Charger/Accessory
jack (2).
4. Plug the charging head into a standard AC power outlet.
The device turns on with the screen locked and indicates
both its charge state and percent of charge.
Warning!:
While the device is charging, if the touch screen does not function
due to an unstable power supply unplug the USB power adapter
from the power outlet or unplug the USB cable from the device.
Correct
Incorrect
Note:
This illustration displays both the
connecting the charger. If the charger is incorrectly connected,
damage to the accessory port will occur therefore voiding the phone’s
warranty.
correct
and incorrect orientation for
5. When charging is finished, first unplug the charger’s power
plug from the AC wall outlet, then disconnect the charger’s
connector from the phone.
Important!:
If your handset has a touch screen display, please note that a
touch screen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a
metallic object when pressing on the touch screen may damage
the tempered glass surface and void the warranty. For more
information, refer to “Standard Limited Warranty” on page 260.
Low Battery Indicator
When the battery level is low and only a few minutes of talk time
remain, a warning tone sounds and the “Low battery” message
repeats at regular intervals on the display. In this condition, your
phone conserves its remaining battery power, by dimming the
backlight.
When the battery level becomes too low, the phone automatically
turns off.
Getting Started 12
Extending Your Battery Life
Active applications, light levels, Bluetooth usage, and GPS
functionality all act to drain your battery. The following is a list of
helpful tips that can help conserve your battery power:
•
Reduce your backlight on time.
•
Turn Bluetooth off when not in use.
•
Turn Wi-Fi off when not in use.
•
Deactivate the GPS when not needed. Most applications using this
function will periodically query the GPS satellites for your current
location; each query drains your battery.
•
Do not wait until your battery is completely depleted before charging
your device. Repeating this process of a complete discharge and
recharge can over time reduce the storage capacity of any battery.
•
Turn off Automatic application sync.
•
Use the Power Savings Widget to deactivate hardware functions such
as Wi-Fi, Bluetooth, GPS, Synchronization, or LCD brightness setting.
•
Check the Battery use screen to review what features or functions
have been consuming your battery resources.
•
Check the Running Services and close any unnecessary applications.
•
Use the Task Manager feature to end/shutdown background
applications that are still running. These minimized applications can,
over time, cause your device to “slow down”.
•
Turn off any streaming services after use (see Running Services).
13
•
Animated wallpapers use processing power, memory, and more power.
Change your Live Wallpaper to a non-animated Wallpaper gallery or
Gallery image.
Power Savings
Active applications, Wi-Fi, Bluetooth, GPS, Synchronization,
Location consent, or the LCD Brightness functionality all act to
drain your battery.
The Power Savings application was designed to quickly activate
(turn on), or deactivate (turn off) those functions or applications
that use the most battery power.
1. From the Home screen,
touch and hold an empty
area until the
Add to Home
menu displays.
2. Tap
Widgets ➔ Power
savings
. The Power Control
shortcut is added to the
current screen.
Tap any of the icons on the Power Savings shortcut bar to
3.
activate/deactivate the feature.
Note:
A green bar displayed beneath the icon means the application is active
(turned on). The green bar is removed from beneath the icon when the
feature is deactivated (turned off).
Initial Device Configuration
1. Tap the on-screen Android icon to begin the setup process.
2. Tap
Skip
to ignore the Wi-Fi connection setup process.
3. Select/deselect the desired Google location services and
tap
Next
.
4. Configure the Date and Time settings and tap
Note:
Enabling Google location services can drain battery power. For more
information, refer to “Power Savings” on page 13.
5. Press and hold until the Phone options screen
Next
appears.
6. Tap
Power off
() ➔ OK.
Switching the Device On or Off
If you have not already configured your device after an initial
firmware update, you will be prompted with a series of
configuration screens.
Once the device has been configured, you will not be prompted
with these screens again.
Important!:
Before the initial configuration, you quickly access emergency
services by tapping
dialer.
1. Press and hold until the device switches on.
Emergency call
and using the on-screen
The device searches for your network and after finding it,
.
you can make or receive calls.
Note:
The display language is preset to English at the factory. To change the
language, use the Language menu. For more information, refer to
“Language & Keyboard Settings” on page 232.
2. Press and hold until the Phone options screen
appears.
3. Ta p
Power Off
() ➔ OK.
Getting Started 14
Locking and Unlocking the Device
By default, the device screen locks when the backlight turns off.
䊳
Place your finger on the screen and swipe the glass in any
of the directions shown unlock the device.
15
Note:
You can choose to configure lock settings to prevent unauthorized use
of your device. For more information, refer to “Setting up SIM Card Lock” on page 222.
Creating a New Google Account
You should create a Google™ Account when you first use your
device in order to fully utilize the functionality. This account
provides access to several device features such as Gmail, Google
Maps, Google Search, and the Android Market applications.
Before you are able to access Google applications, you must
enter your account information. These applications sync between
your device and your online Google account.
To create a new Google Account from your phone:
1. From the Home screen, tap (
2. Read the introduction and tap
3. Follow the on-screen instructions to create a Google
Market
).
Next ➔ Create
to begin.
Account.
– or –
If this is not the first time you are starting the phone, tap
➔ (
Gmail
).
Note:
If you already have a Google account, you only need to sign in.
To create a new Google Account from the Web:
1. From a computer, launch a Web browser and navigate to
www.google.com
2. On the main page, click
3. Follow the on-screen prompts to create your free account.
4. Look for an email from Google in the email box you
.
Sign-in ➔ Create an account now
provided, and respond to the email to confirm and activate
your new account.
Signing into Your Google Account
1. Launch an application that requires a Google account
(such as Android Market or Gmail).
2. Click
3. Tap the
Next ➔ Sign in
Username
and
.
Password
fields and enter your
information.
4. Tap
Sign in
. Your device communicates with the Google
servers to confirm your information.
5. If prompted, create a new Gmail username by entering a
prefix for your
@gmail.com
email address.
Retrieving your Google Account Password
A Google account password is required for Google applications. If
you misplace or forget your Google Account password, follow
these instructions to retrieve it:
.
1. From your computer, use an Internet browser and navigate
to
http://google.com/accounts.
2. Click on the
3. Enter your full Gmail address and click
Can’t access your account?
password recovery procedure.
Voice Mail
Setting Up Your Voice Mail
Your device automatically transfers all unanswered calls to
voicemail, even if your device is in use or turned off. As soon as
your battery is charged and the SIM card inserted, activate your
voicemail account.
Important!:
Always use a password to protect against unauthorized access.
link.
Submit
. Follow the
Getting Started 16
For new users, follow the instructions below to set up voice mail:
1
1
1
Note:
Voicemail setup may be different depending on your network.
1. From the Home screen, tap and then touch and hold
the key until the device dials voice mail.
1
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and a
display name.
Accessing Your Voice Mail
You can access your Voice Mail by either pressing and holding
on the keypad, or by using the phone’s Application icon,
then tapping the Voice Mail application. To access Voice Mail
using the menu:
1. From the Home screen, tap and then touch and hold
until the device dials voice mail.
Note:
Touching and holding will launch Visual voicemail if it is already
active on your device.
2. When connected, follow the voice prompts from the voice
mail center.
17
Accessing Your Voice Mail From Another Phone
1. Dial your wireless phone number.
2. When you hear your voicemail greeting, press the asterisk
key on the phone you are using.
3. Enter your passcode.
Visual Voicemail
Visual Voicemail enables users to view a list of people who left a
voicemail message, and listen to the any message they want
without being limited to chronological order.
1. From the Home screen, tap (
Visual Voicemail
2. Read the on-screen information and tap
().
Applications
Next.
) ➔
A list of the
voicemail messages displays.
Important!:
If this is your first time to ever access Visual Voicemail, you may
be prompted to enter a new PIN code and tap
Visual Voicemail.
Note:
You must subscribe to Visual Voicemail service to use this feature.
Charges may apply. Please contact your service provider for further
details.
3. Tap an on-screen voicemail message to play it back.
Next
to activate
Task Manager
Your device can run applications simultaneously, with some
applications running in the background.
Sometimes your device might seem to slow down over time, and
the biggest reason for this are background applications. These
are applications that were not properly closed or shutdown and
are still active but minimized. The Task Manager not only lets you
see which of these applications are still active in the background
but also easily lets you choose which applications are left
running and which are closed.
Note:
The larger the number of applications running on your phone, the
larger the energy drain on your battery.
Task Manger Overview
䊳
From the Home screen, tap (
Task Manager
().
Applications
) ➔
– or –
Press and hold then tap
Task manager
. This screen
contains the following tabs:
• Active applications
display those currently active applications
running on your phone.
• Downloaded
the Market that are taking up memory space. Tap
displays any installed packages or applications from
Uninstall
remove them from your phone.
• RAM
, which displays the amount of current RAM (Random Access
Memory) currently being used and allow you to
Clear Memory
either Level 1 or Level 2 (both Level memory locations).
•Storage
displays a visual graph indicating the available and used
space within the Random Access Memory (RAM), Program, and
External SD card.
•Help
provides additional battery saving techniques.
Shutting Down an Currently Active Application
1. From the Home screen, tap ➔
2. From the
Active applications
applications or tap
Exit all
Task Manager
tab, tap
Exit
to close selected
to close all background running
applications.
Getting Started 18
to
for
().
Section 2: Understanding Your Device
This section outlines key features of your phone. It also describes
the phone’s keys, screen and the icons that display when the
phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of the
features included in your phone.
•
Touch screen with virtual (on-screen) QWERTY keyboard
•
High Speed Packet Access Plus (HSPA+) delivering data speeds faster
than the current 3G network technology.
•
Android 2.3, Gingerbread Platform
•
Compatible with Adobe® Flash® technology
•
Wi-Fi ® Capability
•
USB Tethering-capable
•
Bluetooth enabled
•
Full Integration of Google Mobile™ Services (Gmail, YouTube, Google
Maps, Google Voice Search)
•
Multiple Messaging Options: Text/Picture/Video Messaging, and Instant
Messaging with Windows Live Messenger, Google Talk™ and Yahoo!
Messenger
•
Corporate and Personal Email
19
•
Media streaming integration via Netflix
•
8 Megapixel Camera and Camcorder with autofocus, multi-shot and
®
digital zoom
•
2 Megapixel Front Facing camera and preloaded Qik® application for
Video Chat
•
MP3 Player with multitasking features
•
Over 250,000 Apps available to download from the Android Market™
•
Pre-loaded e-reader applications such as: Blio®, Google Books™, and
Zinio®
•
Social Hub to integrate all of your favorite social networking sites.
•
Polaris® Office for document viewing and editing
•
Assisted GPS (TeleNav GPS Navigation and Google Navigation)
Access to thousands of Movies and TV Shows with the Samsung Media
Hub
•
HD Video Player 720p)
– Codec: MPEG4, H.264, H.263, VC-1, WMV7/8, VP8, MP43
– Format: 3GP (MP4), WMV (ASF), AVI, and DivX
•
DivX Certified® to play DivX® video up to HD 720p, including premium
content
•
Kies Air to wirelessly sync your PC with your phone via a Wi-Fi®
connection
•
AllShare™ to share your media content across DLNA certified devices
Front View
The following illustrations show the main elements of your
phone:
The following list correlates to the illustrations.
1.
Front Facing Camera
allows you to take pictures while
facing the screen and allows you to video conference.
Note:
Video recorded in Portrait mode is reversed during playback.
Understanding Your Device 20
2.
Volume key
allows you to adjust the ringer volume in
standby mode (with the phone open) or adjust the voice
volume during a call.
•
Pressing the volume key down mutes the ring tone.
3.
microSD Card Slot
When receiving an incoming call:
(internal) allows you use a microSD card
to expand the memory of your phone.
4.
Menu key
displays a list of options available for the current
screen. From the Home screen it displays Add, Wallpaper,
Search, Notifications, Edit, and Settings options.
5.
Home
key displays the Home screen when pressed.
6.
USB Power/Accessory connector
allows you to connect a
power cable or optional accessories such as a USB/data
cable.
7.
Quick search
is used to search the device for applications,
contact information, or searches the internet for
information.
8.
Back key
redisplays the previous screen or clears entries.
21
9.
Display
shows all the information needed to operate your
phone, such as the connection status, received signal
strength, phone battery level, and time.
10.
Power/End key
ends a call or switches the phone off and
on. Press and hold for two seconds to turn off Silent mode,
Flight mode, or to turn the phone on or off.
11.
Headset jack
allows you to connect a hands-free headset
so you can listen to music.
12.
Microphone
during phone calls and allows other
is used
callers to hear you clearly when you are speaking to them.
It is also used to make voice note recordings.
13.
Receiver
allows you to hear the other caller and the
different ring tones or sounds offered by your phone.
14.
Proximity Sensor
detects how close an object is to the
surface of the screen. This is typically used to detect when
your face is pressed up against the screen, such as during
a phone call.
–
While talking on the phone, the sensor detects talk activity and
locks the keypad to prevent accidental key presses.
Light Sensor
123
15.
lets you use the ambient light level to adjust
the screen brightness/contrast. This sensor decreases
screen brightness in dim light.
•
In a bright light condition (outdoors), the sensors cause the device
to increase the brightness and contrast for better viewing.
•
In dim light conditions, the device increases the screen brightness
to compensate.
Back View of Your Phone
The following illustration shows the external elements of your
phone:
1.
External speaker
allows you to hear ringers, music, and
other sounds offered by your phone.
2.
Flash
is used to take photos in low-light conditions.
3.
Camera lens
is used to take photos.
Phone Display
Your phone’s display provides information about the phone’s
status, and is the interface to the features of your phone. The
display indicates your connection status, signal strength, battery
status and time. Icons display at the top of the phone when an
incoming call or message is received and also alerts you at a
specified time when an alarm was set. The screen also displays
notifications, and Application (or shortcut) bar with four icons:
Phone, Contacts, Messaging, and Applications.
Understanding Your Device 22
Google search
Home Screen
Primary
Notification
Shortcuts
Status Bar
area
Status
area
Shortcuts
Battery status
Connection Status
Time
Signal strength
Display settings
In this menu, you can change various settings for the for the
wallpaper, cube, brightness or backlight.
䊳
From the Home screen, tap (
(
Settings
) ➔
“Display Settings” on page 217.
Display
. For more information, refer to
Applications
) ➔
Status Bar
The Status Bar shows information about the connection status,
signal strength, phone battery level, and time, and displays
notifications about incoming messages, calls and other actions.
This list identifies the icons you see on your phone’s display
screen:
Indicator Icons
This list identifies the symbols you’ll see on your phone’s display
and Indicator area:
Displays your current signal strength. The greater the
number of bars, the stronger the signal.
Indicates that the Flight Mode is active. You cannot
send or receive any calls or access online information.
Indicates there is no signal available.
Displays when there is no SIM card in the phone.
Displays when there is a system error or alert.
Displays when a call is in progress.
23
Displays when a call is on hold.
Displays when you have missed an incoming call.
Shows your current battery only has three percent
power remaining and will immediately shutdown.
Represented as a blinking icon.
Displays when connected to the EDGE network.
Displays when the speakerphone is on.
Displays when the microphone is muted.
Displays when Call forwarding is set to Always
forward. For more information, refer to “Configuring Additional Voice Call Settings” on page 213.
Displays your current battery charge level. Icon
shown is fully charged.
Displays your current battery is 100 percent charged.
This icon is followed by an audible beep.
100%
Displays your battery is currently charging.
Displays your current battery charge level is
very low.
Displays when your phone is communicating with
the EDGE network.
Displays when connected to the 3G network. 3G
indicator is only seen when roaming.
Displays when your phone is communicating with
the 3G network. 3G indicator is only seen when
roaming.
Displays when connected to the HSPA+ network.
Displays when your phone is communicating with the
HSPA+ network.
Displays when the phone is connected to a computer
using a supported USB cable connection.
Displays when there is a new text message.
Understanding Your Device 24
Displays when an outgoing text message has failed to
be delivered.
Displays when there is a new voicemail message.
Displays when the Sound profile is set to Silent mode
and Vibrate is set to Always or Only in silent mode.
Displays when data synchronization and application
sync is active and synchronization is in progress
Displays when there is a new visual voicemail
message.
Displays in the notifications window when there is
a new Email message.
Displays in the notifications window when there is
a new Gmail message.
Displays when the time and date for a Calendar Event
has arrived. For more information, refer to “Calendar”
on page 198.
Displays when an alarm is set.
For more information, refer to “Setting an Alarm” on
page 199.
Displays when the phone is in Silent mode.
All sounds except media and alarms are silenced, and
Vibrate mode is set to
mode
. For more information, refer to “Silent mode” on
Never
or
Only when not in silent
page 215.
25
for Gmail, Calendar, and Contacts.
Displays when Bluetooth technology is active and
enabled.
Displays when the Bluetooth technology is active
and communicating with an external device.
Displays when the an outbound file transfer is in
progress.
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there is an available
open wireless network.
Displays when Wi-Fi is configured for a direct
connection to another compatible device in the same
direct communication mode.
Displays when the Mobile AP Hotspot feature is active
and communicating. For more information, refer to
“Portable Wi-Fi Hotspot” on page 196.
Loading...
+ 256 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.