Samsung SEG-I897ZKAATT User Manual

Mobile Phone Upgrade

You don't have to visit a service center to obtain a feature upgrade or update for your mobile phone. You can

use Mobile Phone Upgrade to upgrade your mobile phone's software to the latest version yourself.

Caution

Before using Mobile Phone Upgrade, please read the following information carefully.

 Before connecting device to your PC, please change the device USB settings to “Ask on connection”.

(From the Home screen, touch ➔ Settings ➔ Applications ➔ USB settings) Connect the device to your PC, then select “Samsung Kies” from the “Select USB mode” screen on the device before starting firmware upgrade.

 To protect your data against the risk of data loss during an upgrade, always create backups of your

important data (phonebook, photos, etc.).

 Do not disconnect the USB cable from the mobile phone while upgrade is in progress.  Before attempting to upgrade your mobile phone, make sure its battery is fully charged.  Refrain from pressing buttons or accessing menus on your mobile phone while upgrade is in progress.  Files protected by digital rights management (DRM) may be deleted unless your ownership rights have

been backed up.

 If disk space is insufficient, backup may fail. Make sure that there is sufficient disk space before

starting backup.

 The time needed to perform a backup process differs depending on the amount of data.  Any data in the SIM Card will not be backed up.  You cannot answer an incoming call while an upgrade is in progress.  An upgrade usually takes 10 to 30 minutes, but may take longer depending on the speed of your

network connection.

 Running PC software while an upgrade is in progress may place a heavy load on your computer.

Running

- Click on [Mobile Phone Upgrade] button on the program.

- Click on the [Upgrade required] link in the mobile phone information display of the program.

Performing a Mobile Phone Upgrade

1) Review the upgrade version and the necessary information, check the acknowledgement checkbox, and click on [Upgrade] button.

 Move the mouse cursor over [View detailed information] in the upgrade version display, and the

details of improvements included in the upgrade will be displayed.

2) Once the upgrade is complete, click on [OK] button.

※ Do not disconnect the mobile phone from PC while upgrade is in progress.

Mobile Phone Emergency Recovery

If you disrupt a mobile phone's connection while an upgrade is in progress, or an error occurs during an upgrade, your mobile phone may cease to work correctly. You can use Mobile Phone Emergency Recovery to

recover your mobile phone from such failure.

Running

- Click on [Emergency Recovery] button at the bottom of the program.

Performing a Mobile Phone Emergency Recovery

1) Follow the instructions to switch your mobile phone to recovery mode.

 If you have multiple mobile phone models that have failed an upgrade attempt, check their model

name, click on [Emergency Recovery] button and follow the instructions to switch the mobile phones to recovery mode.

2) Once the emergency recovery is complete, click on [OK] button.

※ Different mobile phone models have different ways of switching to recovery mode.

※ Do not disconnect the mobile phone from PC while recovery is in progress. ※ If your USB setting is “Samsung Kies” (not “Ask on connection”) before you do firmware

upgrade, you must select one of USB setting after firmware upgrade is done.