Samsung SDZ-300 User Manual

SALES NETWORK

•

SAMSUNG TECHWIN CO., LTD.

145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : [phone]~8141 FAX : [phone]

•

SAMSUNG OPTO-ELECTRONICS UK, LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : [phone] FAX : [phone]

www.samsungtechwin.com
www.samsungcctv.com

•

TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.

7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : [phone](33821) FAX : [phone]

P/No. : Z6806-0709-01A

VAN 06. 05

High Sensitivity , Day & Night
30X Zoom Color Camera

INSTRUCTION MANUAL

SDZ-300

About this manual

Please read this manual carefully before installing and using the camera. Be sure to keep the manual handy for later reference.

Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and proper input
power voltage. In order to that you can understand this manual thoroughly,
we'll introduce our model description.

■ SDZ-300 SERIES

•NTSC MODEL •PAL MODEL
SDZ-300ND SDZ-300PD
SDZ-300N SDZ-300P

■ MODEL DESCRIPTION

• SDZ-300X X

__

POWER SOURCE

SIGNAL SYSTEM

The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.

• SIGNAL SYSTEM

NTSC MODEL

N

PAL MODEL

P

• POWER SOURCE

D DC 12V

DC 12V/AC 24V~ DUAL TYPE

--

Correct Disposal of This Product

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.

(Waste Electrical & Electronic Equipment)

INFORMATION-This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.

WARNING -Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.

WARNING -To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Features

30x Optical Zoom

The built-in SDZ-300 optical zoom lens is a
highly durable component. It features auto
focus, auto iris, and zoom functions.

SSNR (Samsung Super Noise
Reduction)

By using built-in SSNR function manufactured
by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly
reduced, and the signal-to-noise ratio (S/N)
as well as horizontal resolution have been
improved, resulting in a clear and sharp
image display even in the dark.

Fine Picture Quality under Ultra Low
Lighting

1/4" high density CCD allows the user to
capture bright, high-quality images under
ultra low lighting conditions.

High Resolution

Featuring 520TV line horizontal resolution in
color mode and 570TV line horizontal resolution
in BW mode, the camera features Sony's
410,000 pixel CCD and captures clean,
noiseless, high-quality images.

Day & Night

The camera automatically determines whether
it is night time or day time, selecting operating
mode automatically. The camera operates in
color mode during day light conditions and BW
mode in night conditions for clearer identification.

DIS(Digital Image Stabilizer)

The DIS function can compensate for vibration of
the camera. so it helps you obtain more
stabilized image under the shaking conditions.

Motion Detection

Once motion is detected, the camera sends
an alert signal to the processing unit, which, if
used in conjunction with an optional alarm,
can provide effective surveillance of your
property.

Miscellaneous Functions

Other miscellaneous functions of the camera
include privacy zone masking, digital zoom,
line lock synchronization (INT/LL), freeze,
horizontal inversion, and user-configured
presets.

Control via OSD Menu and RS-485

The OSD menu and RS-485 pins allow for
remote control of the camera.
The user can also directly control the lens
using external control connection.

Warning

The camera requires regular maintenance.

Contact an authorized technician for maintenance and/or servicing.

Do not continue to use if malfunctioning.

Prolonged use of the camera in abnormal operating conditions (produces
smoke, overheats, etc.) may result in a fire.

Do not Install the camera on a surface that can not support it.

Installation on an unsuitable surface may cause the camera to fall and/or other hazards.

Do not handle the power cable with wet hands.

May result in an electric shock.

Do not disassemble the camera.

May result in a fire, electric shock, and/or other hazards.

Do not place the camera in the vicinity of inflammables.

May result in a fire and/or other hazards.

Contents

Precautions

Components and Accessories

Overview

Top
Bottom
Back

Connection

Connecting To Monitor
Connecting To Power
Connecting To Connection

8

10

11
11

12
13

14

14
15
16

Operating Your Camera

Menu Configuration
Menu Setup

• CAM TITLE

• WHITE BALANCE

• BACKLIGHT

• MOTION DETECTION

• FOCUS

• EXPOSURE

• SPECIAL

• RESET

• EXIT

Troubleshooting
Specification
STW Protocol Command Description

18
18

19
20
23

24
25
26
30
35
41
41

42
44
46

Precautions

Do not install under extreme
temperature conditions.

Use only under temperature conditions
between -10˚C and +50˚C. Provide good
ventilation when using in high temperature
conditions.

Do not install under unstable
lighting conditions.

Severe lighting changes or flickering may
hinder normal camera operation.

Do not install in high humidity
environment.

May lower image quality.

Avoid touching the camera lens.

The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.

Do not drop the camera or
subject it to physical shock.

May cause a product malfunction.

Do not expose the camera to
rain or other types of liquids.

Wipe dry any liquids. Liquids may contain
minerals that are corrosive to electronic

Never keep the camera face to
strong light directly.

May damage the CCD.

Do not expose the camera to
radioactivity.

Radioactivity exposure may damage the
CCD.

components.

Notes

• Exposure to a spotlight or an object emitting strong light may cause smear or
blooming.

• Ensure that the power source complies with normal specifications before supplying
it to the camera.

COLOR CCD CAMERA User’s Manual

8

COLOR CCD CAMERA User’s Manual

9

Components and Accessories

1. 30x Zoom Color Camera
SDZ-300

2. Instruction Manual

Overview

Top

3. 6-Pin Connection Cable

4. Remote Controller (Optional)

COLOR CCD CAMERA User’s Manual

Tripod Mounting Bracket Screw Hole

Used to fix tripod mounting bracket on top of the camera.

10

COLOR CCD CAMERA User’s Manual

11

Overview

L

Bottom

Tripod Mounting Hole

Used to install the camera on an optional tripod.
The tripod must be equipped with screws with
specifications shown on the right.

Attach the bracket to the top of the camera. Use screws
included in the package or their equivalent (less than
6mm). Otherwise, the bracket may not assemble to the
camera properly.

1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)

Back

Key Buttons

· Following buttons control zoom, focus, and auto focus functions.
WIDE button : To widen the view. (ZOOM OUT)
TELE button : To close in on a far object. (ZOOM IN)
F-NEAR button : To see a near object clearly.
F-FAR button : To see a far object clearly.
AF button : To activate auto focus just once.
Pressing the 'SET' button locks the zoom control function of these buttons and
prompts the main setup menu.

Notes

• The zoom postion is saved after 5 seconds when you set zoom function.

· Main setup menu can be navigated using these buttons.
SET : To access the main setup menu.
UP (WIDE button) : To move the arrow indicator to up.
DOWN (TELE button) : To move the arrow indicator to down.
LEFT (F-NEAR button) : To move the arrow indicator to left.
RIGHT (F-FAR button) : To move the arrow indicator to right.

COLOR CCD CAMERA User’s Manual

12

COLOR CCD CAMERA User’s Manual

13

Overview

Power Input Terminal

Power supply terminal (DC12V±10%).

Power LED

Illuminates when power is supplied.

Video Output Jack

Used to connect an external video monitor in jack.

Communication Control Connector

Used to connect the Remote Controller (Optional). Includes external 'SYNC' signal
input pin, which is used for the line lock function.
Includes the RS-485 communication pin.

External Control Connector

Relates to the motion detection output signal.
Zoom and focus functions can be controlled using external siganals.

Connection

Connecting to Monitor

Connect Video Out Jack to the monitor's Video In jack as shown below.

CCD Camera Monitor

• Connection methods may vary depending on the video equipment. Please
refer to the model specific instruction manual.

• Connect cables with the unit powered down.

• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate
device.

CCD Camera

Intermediate End monitor

Connecting to Power

Each model has a different power input specification.
Please check the model type and standard power requirement before
connecting to power.

DC Power Type (DC 12V, 500mA)

Use DC 12V/500mA power source for SDZ-300ND/PD.

Power Input Terminal

AC/DC Power Type

Use AC24V/500mA or DC 12V/500mA power
source for SDZ-300N/P.

Notes

• Connect the power once the installation is complete.

• The wire is polarized. Match '+' and '-' terminals properly.

COLOR CCD CAMERA User’s Manual

14

COLOR CCD CAMERA User’s Manual

15

Connection

Connecting to connection

External Control Connector

COM

MD

Function

Tele

Wide

Far

Near

Signal Level I/O

+6V~+12V

COM

COM

-6V~-12V

+6V~+12V

COM

COM

-6V~-12V

COM

+4.0V~+5.0V

There is motion

5±0.5sec

0V

There is no motion

Connector

ZOOM

FOCUS

* MD (Motion Detection) Output Signal Level (less than 10mA)
* When using the MD function, the 'GND' should be connected to the frame ground.

GND
MD
COM
FOCUS
ZOOM

I

I

-

O

Communication Control Connector

The camera can be controlled by using external controllers like a Remote
controller. (RS-485 Communication)

SCC-3000

Remote Controller

SCC-100

6-Pin Connection
Cable

* Communication Control Connector Pin Description .

Number Name Description

1 GND ­2 EXT.SYNC External ‘SYNC’ Signal
3 GND -

* EXT. SYNC

60Hz ± 0.1Hz(NTSC), 50Hz ± 0.1Hz(PAL)

Number Name Description

4TRX + RS-485 Communication
5 TRX - RS-485 Communication
6 Output Power Remote Controller only

Min: 500ns

3V or 5V
0V

* Communication Setting can set the communication setting as shown in the table below.

When you use to connect SCC-100 or SCC-3000, the default sets for SCC-3000

ITEM SCC-100 SCC-3000

MODE Serial Serial

Data Bit 8 bit 8 bit

Bit/Sec 9600bps 9600bps

Parity EVEN NONE

CAM ID NO. 0 1~255

RETURN PACKET ENABLE See the SCC-3000 manual

Notes

• Contact an authorized technician for inspection.

COLOR CCD CAMERA User’s Manual

16

COLOR CCD CAMERA User’s Manual

17