Samsung SDP-860 User Manual

Samsung Digital Presenter

(SDP-860)

Software User's Manual

Table of Contents

Installing Samsung Digital Presenter Program ································································1

System Requirements ·······················································································································1

Installing Program······························································································································2

Connecting Samsung Digital Presenter to a Computer······························································2 Installing the Samsung Digital Presenter Program·····································································3

Installation Q&A·································································································································6

How can I check if my computer supports USB? ·······································································6

How can I delete USB drivers and the Samsung Digital Presenter program from my computer?

Opening Samsung Digital Presenter Program··································································7

Features of Samsung Digital Presenter·····························································································8

Samsung Digital Presenter Feature Tabs··························································································9

Ratio and Image save Tab··········································································································9 Options & Information Tab ········································································································11

Main Features of Samsung Digital Presenter USB Program···························································12

Record Video····························································································································12 Image and Print ························································································································14

·····6

Troubleshooting················································································································17

Installing Samsung Digital Presenter Program

When connected to a computer, Samsung Digital Presenter can be used to save projected

images as picture or video files.

To use this feature, connect the digital presenter to a computer using the USB cable that is

included in the presenter package. Then install the Samsung Digital Presenter program from

the CD that is also included in the presenter package.

System Requirements

 CPU: Pentium 4 or above (Core2 duo or higher recommended)

 Windows XP Service Pack 2 or higher

- Compatible Windows Programs: Windows XP (service pack 2) / Windows Vista /

Windows 7

- Must have Windows XP service pack3 – one function (Framerate control)

 RAM: 512MB or more (2GB or more recommended)

 USB 2.0 Port

 Graphic Cards that support the XGA resolution with at least 65,536 colors

- Video RAM 256MB or more

- SXGA or higher resolution recommended

 CD-ROM Drive

♦

Note

 Samsung Digital Presenter's USB 2.0 mode may not function properly in

computers with USB 2.0 PCI/PCMCIA cards.

 In the case of some windows7 theme, user cannot watch clearly.

Therefore we recommend you to use windows 7 basic theme for using SDP-860

USB S/W.

SDP-860 Software User’s Manual

Installing Program

Please install the program following the instructions below.

1. Connect the Samsung Digital Presenter to a computer using the enclosed USB cable, and

then turning it on.

2. Installing the Samsung Digital Presenter program. (For more detailed instructions, please

refer to Page 3.)

Connecting Samsung Digital Presenter to a Computer

Connect the USB cable to the USB port of your computer and digital presenter.

Connect the power cable of the digital presenter, and then turn on the power.

♦

Caution

 When connecting the USB cable to a computer, please use a USB port that is

connected directly to the computer main board.

(An extended front port and wireless USB hub may cause errors depending on

the computer brands and models.)

A 5m or shorter USB cable is recommended to connect a digital presenter and a

computer.

Installing Samsung Digital Presenter Program

Installing the Samsung Digit al Presenter Program

1. You may install the program in a computer before connecting the computer with the digital

presenter via USB; the presenter will function properly.

2. Click on install viewer to start installing the program. → Click on [USB S/W] → [SDP USB

Viewer] to start installing the program.

3. When the following installation window appears, press Next.

SDP-860 Software User’s Manual

4. Select a folder to install the program, and then press Next to start the installation process.

5. The program is being installed while the following progress window remains on the screen.

+ 16 hidden pages