Samsung SDP-760 User Manual

Digital Presenter

User Manual

SDP-760

Digital Presenter

User Manual

Copyright

©2012 Sams ung Techwin Co., Ltd. A ll rights re served.

Trademark

The name o f this product is the r egistered trade mark of Samsung Techw in Co., Ltd.
Other tr ademarks menti oned in this manual ar e the registered tr ademark of their re spective comp any.

Restriction

Samsung Tec hwin Co., Ltd shall res erve the copyr ight of this documen t. Under no circum stances, this do cument shall be
reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.

Disclaimer

Samsung Tec hwin makes the best t o verify the integ rity and corre ctness of the con tents in this docum ent, but no
formal gu arantee shall be pro vided. Use of this d ocument and the sub sequent result s shall be entirely on t he user’s own
respons ibility. Samsung Tec hwin reserves th e right to change the c ontents of this do cument without pr ior notice.

Design and specifications are subject to change without prior notice.

is the regi stered logo of Sam sung Techwin Co., Ltd.

overview

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/ accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lighting storms or when unused for long periods of

time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

● OVERVIEW

English

_3

overview

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION
GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.

CAUTION

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.

CAUTION

These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.

4_ overview

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

● OVERVIEW

English

_5

overview

CONTENTS

OVERVIEW

3

INSTALLATION & CONNECTION

12

SETUP & APPLICATION

16

APPENDIX

25

3 Important Safety Instructions
7 Product Features
8 What's Included
9 Product at a Glance
9 Front View
10 Rear View
11 Control Panel

12 Preparations
13 Connecting the Output device
13 Connecting to the monitor
13 Connecting the TV
14 Connecting to the PC
15 Kensington Lock

16 Getting Started
16 Setup
16 Image Adjustment
20 Setting the Output Resolution
21 Setting Supplemental Functions

25 Specifications
27 Menu Settings & Default
28 Troubleshooting

6_ overview

PRODUCT FEATURES

Thanks for purchasing the product.
This product is high quality video presenter which enables simple and easy video display from all sources onto
a computer monitor and video projector devices.

• 3M pixel CMOS Imaging Device

By adopting 1/2.8” 3M pixel CMOS, it implements high-resolution and color reproduction.

• Supports XGA to 1080P (30 frame/sec) Video Output

Supports VGA output of 1080p resolution in XGA and C-VIDEO output, any type of video projectors can be
utilized.

● OVERVIEW

English

_7

overview

WHAT'S INCLUDED

Check if the main unit and all the following accessories are included in the product package.

SDP-760

SAMSUNG DIGITAL PRESENTER

Main Unit Software / User Manual CD Power Adapter

VGA Cable USB Cable Diffusing Sheet

Accessories

RS-232C Cable Microscope adapter

J

8_ overview

`RS-232C cables and adapter lenses from other brands may not be compatible with this product.

Samsung Techwin cares for the environment at all product manufacturing stages, and is
taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.

PRODUCT AT A GLANCE

Front View

● OVERVIEW

Lens

Control Panel

SDP-760

SAMSUNG DIGITAL PRESENTER

Main Pole

Rear Panel

LED Lighting

SAMSUNG DIGITAL PRESENTER

SDP-760

English

_9

overview

Rear View

Item Description

Kensington Lock

a

DC 5V IN Connect the power jack of the DC adapter to this port.

b

RS-232C Connect the RS-232C cable to this port.

c

USB Connect this port to a computer that supports USB communications.

d

C-VIDEO Connect C-VIDEO to the TV for watching the TV.

e

RS-232C USB C-VIDEO VGA OUT

DC 5V IN

ba c d e f

Insert the Kensington security cable. For preventing a product theft or the security
purpose, use the Kensington security cable to tie up this product with a fixed object.

f

10_ overview

VGA OUT

Connect this port to a video input device such as PC monitor or projector. Use this port if
you want to play the video incoming from the presenter on the monitor or projector.

Control Panel

SDP-760

SAMSUNG DIGITAL PRESENTER

SDP-760

SAMSUNG DIGITAL PRESENTER

● OVERVIEW

Item

LIVE Menu setup mode

Description

Power On/Off
When powered, the LED turns to blue.

Adjust the screen brightness Move up or down

Zoom In/Out Move left or right

Open the menu Run the selected menu

Lighting On/Off
Press and hold the button to run MASK function.

Auto Color Adjustment

Auto Focus
Press and hold the button to run manual focusing.

Freeze
Press and hold the button to rotate the played video by 180°.

Cancel your work
Press and hold the button to switch video between VGA ↔ USB.

`Some buttons marked with </> has multiple functions. Press it briefly to use former function of </>, press and hold it

M

for more than 3 seconds to use the latter.

English

_11

installation & connection

SDP-760

SAMSUNG DIGITAL PRESENTER

PREPARATIONS

1. Connect the necessary cables of VGA OUT, C-VIDEO, USB and Power.

VGA OUT

USB

RS-232C USB C-VIDEO VGA OUT

DC 5V IN

SAMSUNG DIGITAL PRESENTER

SDP-760

C-VIDEO

2. Press

of the presenter to turn on the digital presenter.

12_ installation & connection

SDP-760

SAMSUNG DIGITAL PRESENTER

CONNECTING THE OUTPUT DEVICE

Connecting to the monitor

To display video on a monitor, the monitor should be connected to the presenter with monitor cable.

Monitor Cable

VGA OUT

RS-232C USB C-VIDEO VGA OUT

DC 5V IN

● INSTALLATION & CONNECTION

Digital Presenter

Monitor, projector, etc

Connecting the TV

To display video on a TV, the TV should be connected to the presenter with C-VIDEO cable.

Video Cable

C-VIDEO

RS-232C USB C-VIDEO VGA OUT

DC 5V IN

Digital Presenter

TV

English

_13

installation & connection

Connecting to the PC

To connect the presenter and PC, use USB or RS-232C cable.
Using USB cable enables control as well as video transfer, while RS-232C only enables control as
defined in the protocol.

Connecting a PC with USB Cable

1. Connect the cable to the USB port of the PC.

2. Connect the USB cable’s the other end to the presenter’s [USB] port.

USB Cable

USB

RS-232C USB C-VIDEO VGA OUT

DC 5V IN

Digital Presenter

`It is recommended to connect the USB cable to the USB port on the main board of your PC.

J

(Using an extension front port or the bus-power USB hub may cause a problem, depending on the manufacturer.)
Use only the USB cable of less than 4.0m in length.

`Use the USB cable provided by Samsung Techwin.

(Using a cable from different manufacturer may cause problem depending on the cable specifications.)

`If using the USB cable for the connection, install the provided USB driver and SDP USB Viewer on your PC.

For more information, refer to the provided program manual.

14_ installation & connection

PC

Connecting a PC with RS-232C Cable

1. Connect the cable to the RS-232C port of the PC.

2. Connect the RS-232C cable’s the other end to the presenter’s [RS-232C] port.

RS-232C Cable (Purchased separately)

RS-232C

RS-232C USB C-VIDEO VGA OUT

DC 5V IN

● INSTALLATION & CONNECTION

Digital Presenter

`The RS-232C cable is optional that is not included in the product package. Purchase it if needed.

J

However, a third-party RS-232C cable (manufactured by other than Samsung Techwin) may not guarantee a proper

PC

operation.

`If using the RS-232C cable, no specific driver is provided. Obtain the necessary programs on your own.

M

KENSINGTON LOCK

Kensington lock is a theft-proof device that you can use to tie up the presenter to a fixed object such as
showcase using a wire cable.

RS-232C USB C-VIDEO VGA OUT

DC 5V IN

Kensington Lock (Purchased separately)

`Kensington lock is an optional accessory (unbundled). Purchase it for you.

M

English

_15

setup & application

GETTING STARTED

1. Press the button.

The power LED turns to blue.

2. Press the

3. The main menu appears.

button.

PRESENTER MAIN MENU

IMAGE ADJUSTMENT



OUTPUT MODE

CONFIGURATION

SAVE AND EXIT

}

}

}

}

SETUP

Image Adjustment

Setting the White Balance (WB MODE)

You can adjust the color tones of the image automatically in Live mode.

1. From the menu, select IMAGE ADJUSTMENT  WB MODE.

PRESENTER IMAGE ADJUSTMENT

WB MODE ATW (Auto Tracking)



IMG MODE IMAGE

DNR ON

ANTI FLK OFF

MASK SETUP }

RETURN }

2. Each time you press [►] the white balance mode will switch to in the order of: <ATW(Auto Tracking)

AWB(KEY)  MANUAL WB>.



• Auto color adjustment 1: ATW(Auto Tracking)
This will perform the white balance function according to the change of the color temperature of a
light source.

- Select ATW(Auto Tracking).

- When done, return to the Live screen.

16_ setup & application

• Auto color adjustment 2: AWB(KEY)
You can adjust the color tones of the displayed video automatically each time you press

- Select AWB(KEY) from the menu and press

button in LIVE screen to adjust color

automatically.

• Manual color adjustment: MANUAL WB
You can adjust the settings of RED GAIN and BLUE GAIN manually before performing the white
balance.

- Select MANUAL WB.

- Use the [◄►] button to change the settings to your preference.

- When done, return to the Live screen.

Compensating Images (IMG MODE)

This will optimize the display of the image.

1. From the menu, select IMAGE ADJUSTMENT  IMG MODE.

PRESENTER IMAGE ADJUSTMENT

WB MODE ATW (Auto Tracking)

IMG MODE IMAGE



DNR ON

ANTI FLK OFF

MASK SETUP }

RETURN }

2. Each time you press [►], the IMG MODE will switch to <IMAGE  CUSTOM  TEXT> in this

sequence.

• TEXT : Optimize the display of a manuscript containing a large volume of text.

• IMAGE : Optimize the display of a photo or picture.

3. If you select CUSTOM, you will see the following sub menu items.

.

● SETUP & APPLICATION

CUSTOM IMAGE SETTING

TONE VERY LOW



COLOR HIGH

SHARPNESS MIDDLE

RETURN

}

• TONE : Select a gamma setting of luminance.
Each time you press [►], the tone setting will switch to <VERY LOW  LOW  MIDDLE  HIGH

VERY HIGH>.



English

_17

setup & application

• COLOR : Select a GAIN setting.
Each time you press [►], the gain of color will switch to <HIGH  B/W  LOW  MIDDLE>.

• SHARPNESS : Set the sharpness of the displayed image.
Each time you press [►], the sharpness level will switch to <MIDDLE  HIGH  LOW>.

`If you increase the sharpness level, the image may be displayed abnormally or it can cause a noise.

J

Setting the Noise Reduction (DNR)

DNR stands for Digital Noise Reduction that provides a clear image through 2D/3D filtering.

1. From the menu, select IMAGE ADJUSTMENT  DNR.

PRESENTER IMAGE ADJUSTMENT

WB MODE ATW (Auto Tracking)

IMG MODE IMAGE

DNR ON



ANTI FLK OFF

MASK SETUP }

RETURN }

2. Press [►] button to set whether to use DNR function.

`A faster moving object may cause an afterimage if using DNR function.

J

Setting the ANTI FLK Mode

You can use this feature if you encounter a flickering screen due to a frequency mismatch with the
ambient lighting.

1. From the menu, select IMAGE ADJUSTMENT  ANTI FLK.

PRESENTER IMAGE ADJUSTMENT

WB MODE ATW (Auto Tracking)

IMG MODE IMAGE

DNR ON

ANTI FLK OFF



MASK SETUP }

RETURN }

2. Use [+] to specify the use of ANTI FLK.

18_ setup & application

Setting the Mask

You can mask a portion or the whole of the screen so that it is hidden.

1. From the menu, select IMAGE ADJUSTMENT  MASK SETUP.

MASK SETUP MENU

BOUNDS VGA/USB



TONE LEVEL 4

WIDTH ··· * ··· ··· ··· 25

HEIGHT ··· * ··· ··· ··· 25

RETURN

2. Select MASK SETUP to display the sub menu items.

• BOUNDS : With BOUNDS, select the display device currently using.
Press [►] button to select BOUNDS mode in the order of <VGA/USB  C-VIDEO>.

• TONE : Select a tone level.
Each time you press [►], the tone value will switch to <LEVEL 1-2-3-4>. The lower the level is, the
greater the transparency of the masking area becomes.

• WIDTH : Select a mask width.
Press [

◄

] or [►] button on the control panel to set the area between 1~100.

• HEIGHT : Select a mask height.
Press [

◄

] or [►] button on the control panel to set the area between 1~100.

`When the mask setting is completed, press the button on the control panel to activate it. Use the left/

M

right buttons to move the masking area.

`Note that the mask WIDTH/HEIGHT value is not absolute value but relative and proportional to the width/height of the

video in applicable aspect ratio, which will differ from resolution setting.

}

● SETUP & APPLICATION

English

_19

setup & application

Setting the Output Resolution

You can set a different resolution according to the output device (monitor, projector).

1. Select OUTPUT MODE from the menu.

PRESENTER OUTPUT MODE

1080P 1920X1080 30fps



720P 1280X720 30fps

UXGA 1600X1200 20fps

SXGA 1280X1024 30fps

WXGA 1280X800 30fps

XGA 1024X768 30fps

USB USB OUT MODE

RETURN

CURRENT: 1080P MODE

2. Move the cursor (►) to a desired resolution and set the output resolution of the digital presenter.

`Setting to UXGA/USB or changing the mode from UXGA/USB to others requires restarting to apply the changed

M

resolution.

`Supported resolutions are listed in the above example. Refer to the above image.

}

}

}

}

}

}

}

}

}

20_ setup & application

Setting Supplemental Functions

Setting the Freeze Mode

1. From the menu, select CONFIGURATION  FREEZE.

PRESENTER CONFIGURATION

FREEZE ALL DISPLAY



USB TWAIN DISABLED

PROTOCOL 10BYTE

C-VIDEO NTSC

SYSTEM INFO.

SYSTEM RESET }

RETURN }

2. Select ALL DISPLAY or EXCEPT C-VIDEO mode.

• If selecting <ALL DISPLAY> mode

- If you press
be frozen.

• If selecting <EXCEPT C-VIDEO> mode

- If you press , all videos will be frozen except the C-VIDEO connected video.

}

, both VGA/ C-VIDEO connected video and USB connected video will

● SETUP & APPLICATION

English

_21

setup & application

Setting the USB TWAIN

The USB TWAIN mode is available if you use the USB cable to connect between presenter and PC that
has installed a graphic application in compliance with TWAIN (ex: Photoshop (Except CS5), ACDSEE, MS
Office word 2003, etc).

1. From the menu, select CONFIGURATION  USB TWAIN.

PRESENTER CONFIGURATION

FREEZE ALL DISPLAY

USB TWAIN DISABLED



PROTOCOL 10BYTE

C-VIDEO NTSC

SYSTEM INFO.

SYSTEM RESET }

RETURN }

2. To activate TWAIN, set it to ENABLED.

`For more information, refer to the relevant section of the application program’s user manual.

M

`TWAIN can be performed even if USB TWAIN is set to DISABLED, where only a specific resolution of video can be

played properly.
If you want to use other than 320x240 and 640x480, set USB TWAIN to ENABLED under the CONFIGURATION menu.

}

22_ setup & application

Setting the Protocol

Select the protocol appropriately for communicating with other devices.

1. From the menu, select CONFIGURATION  PROTOCOL.

PRESENTER CONFIGURATION

FREEZE ALL DISPLAY

USB TWAIN DISABLED

PROTOCOL 10BYTE



C-VIDEO NTSC

SYSTEM INFO.

SYSTEM RESET }

RETURN }

}

● SETUP & APPLICATION

2. Press

to select 10BYTE or 6BYTE.

`The selected protocol will be applied after exiting the menu by SAVE AND EXIT.

J

Setting the C-VIDEO

Use this mode to match the output signal between connected device and C-VIDEO.

1. From the menu, select CONFIGURATION  C-VIDEO.

PRESENTER CONFIGURATION

FREEZE ALL DISPLAY

USB TWAIN DISABLED

PROTOCOL 10BYTE

C-VIDEO NTSC



}

2. Press

SYSTEM INFO.

SYSTEM RESET }

RETURN }

to select NTSC or PAL.

English

_23

setup & application

SYSTEM INFO.

You can check the current version information.

1. From the menu, select CONFIGURATION  SYSTEM INFO..

VERSION INFORMATION

RETURN }



<VERSION INFORMATION>

uCOM : 0.08_120529

SYSTEM RESET

Configured settings for all menu items will be initialized.

1. From the menu, select CONFIGURATION  SYSTEM RESET.

Are You Sure?

Yes, Reset to Default Setting Now! }



No, Back to the Previous Menu

}

2. Press

3. Press

4. Selecting YES initializes to the factory defaults, and automatically restarts.

button to select Yes or No.

to perform the operation.

DISPLAY HOT KEY

• Forced SXGA mode : Turn on, press and hold for more than 5 seconds to force Output mode to
SXGA.

• Forced USB mode : Turn on, press and hold
USB.

24_ setup & application

for more than 5 seconds to force Output mode to

appendix

SPECIFICATIONS

For enhanced performance, the product specification is subject to change without prior notice.

Optical Lens

Video System

Functions

Interface

Item Description

Recording Lens F=2.0, f=5.0mm

Effective Range Max : 364 X 257 mm (14.3"x10.1") [B4 size or more]

Zoom Digital 16X

Focus Auto/Manual

Exposure AUTO (fine-tuning)

Recording Device 1/2.8" Progressive Scan CMOS image sensor

Gross pixels 2,144(H) x 1,588(V), 3.40M pixels

Valid pixels 2,096(H) x 1,561(V), 3.27M pixels

Frame Rate Max 30 fps (2M)

Native signal output - Full HD (1,920 x 1,080)

VGA Out

Video Output Available (NTSC/PAL)

Resolution 750 TV lines

White Balance ATW / AWB (One-push) / Manual

Image Correction Image Mode/Text Mode/Custom Mode

DNR Available (Low light presenter with 2D/3D NR)

Preset Max of 4 user-defined preset numbers

Mask Available

Freeze Available

Rotate Available (180°)

USB I/F

I/O Port

Power port DC IN 5V DC In × 1

Converted signal output - UXGA (1,600 x 1,200), SXGA (1,280 x 1,024), WXGA
(1,280 x 800), HD (1,280 x 720)XGA (1,024 x 768)

USB 2.0 protocols supported

- UVC for Web Camera

- Twain Driver

Output Port

I/F Port

VGA Out – 15-pin D-SUB connector × 1

C-VIDEO Output - C-VIDEO connector × 1

RS-232C - Φ3.5 jack × 1

USB - USB Type B Connector x 1 (USB device port)

● APPENDIX

English

_25

appendix

Item Description

Others

General Operation

Kensington Lock Integrated

Security Thread on Base Integrated

Operation Temperature +5°C ~ +40°C (+41°F ~ +104°F)

Operation Humidity Below 90%

Adapter

Power consumption ABOUT 7W (MAX : 9W )

Dimension (WXHXD)

Weight 2.3Kg (5.07 lb)

Accessories

5V DC (Adaptor input : AC 100V~240V free voltage,
50/60Hz, output : DC 5V,2.2A)

- In-use : 235 (W) x431 (H) x 115 (D) mm/9.25" (W) x 16.97" (H) x 4.53" (D)

- Off-use : 235 (W) x115 (H) x 290 (D) mm/9.25" (W) x 4.53" (H) x 11.42" (D)

Provided

Optional Microscope adapter, RS-232C cable

USB Cable, VGA Cable, Power Adapter, CD(S/W, User
Manual), Diffusing Sheet

26_ appendix

MENU SETTINGS & DEFAULT

Menu Item

I II III IV

1080P (1920X1080) 30fps

720P (1280X720) 30fps

UXGA (1600X1200) 20fps

OUTPUT MODE

IMAGE ADJUSTMENT

CONFIGURATION

SXGA (1280X1024) 30fps

WXGA (1280X800) 30fps

XGA (1024X768) 30fps

USB OUT MODE

WB MODE ATW(Auto Tracking)/AWB(KEY)/MANUAL WB

TEXT

IMAGE

IMG MODE

CUSTOM

DNR ON/OFF ON

ANTI FLK OFF/ON OFF

BOUNDS - VGA/USB
C-VIDEO

MASK SETUP

FREEZE ALL DISPLAY/EXCEPT C-VIDEO ALL DISPLAY

USB TWAIN DISABLED/ENABLED DISABLED

PROTOCOL 10BYTE/6BYTE 10BYTE

C-VIDEO NTSC/PAL -

SYSTEM INFO. - -

SYSTEM RESET Yes/No -

TONE - LEVEL 1/LEVEL 2/LEVEL 3/LEVEL 4 LEVEL 4

WIDTH - 1~100 25

HEIGHT - 1~100 25

TONE - VERY LOW/LOW/MIDDLE/HIGH/
VERY HIGH

COLOR - HIGH/BW/LOW/MIDDLE

SHARPNESS - MIDDLE/HIGH/LOW

Default

● APPENDIX

1080P

ATW (Auto
Tracking)

IMAGE

VGA/USB

English

_27

appendix

TROUBLESHOOTING

Problem Solution

Check if the resolution of the output device matches with the presenter.
Ex) If the projector’s highest video mode is SVGA and the presenter’s output resolution has
been set to XGA or SXGA, no image will be displayed on the screen.

No video is displayed.

Displayed screen is out of focus. yCheck if the subject is too close to the lens module.

USB communication with the PC
fails.

yCheck if the output device has set a proper input source.

yCheck if brightness and focus are adjusted properly.

yCheck if video cable is properly connected to output port.

yCheck if the OUTPUT MODE is set to VGA / USB.

yCheck if the SDP program is installed on your PC properly.

yCheck if the operating system is Windows XP or Mac OS X 10.5.8 or later. A lower

version of Windows may cause a trouble.

yFor further information, refer to the software user’s manual (for Windows / Macintosh)

provided with the product.

28_ appendix

SALES NETWORK

SAMSUNG TECHWIN CO., LTD.

Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : [phone]~60 FAX : [phone]

SAMSUNG TECHWIN AMERICA Inc.

100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : [phone] Direct : [phone]
Fax : [phone]

1480 Charles Willard St, Carson, CA 90746, UNITED STATES
Toll Free : [phone] FAX : [phone]
www.samsungpresenterusa.com

www.samsungtechwin.com
www.samsungpresenter.com

SAMSUNG TECHWIN EUROPE LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : [phone] FAX : [phone]