Samsung SDH-B74041, SDH-B74081 User Manual

DIGITAL VIDEO RECORDER

User Manual

SDH-B74041/B74081

Overview of DVR

CONTENTS

OVERVIEW OF DVR

DVR BOOT UP

DVR MENU

WEB APPLICATION MANAGER

3 Safety Instruction 4 Front Panel 5 Rear Panel 6 Remote Controller 7 Install Hard Drive 8 Connect external equipment 8 Connect Camera 9 Connect DVR 9 Protection of Cable from Water 10 Installing the camera

11 System Initialization 11 Startup Wizard 14 Main Interface

17 Main Menu Guide 18 Main Menu 35 Menu Lock 35 Split Mode 35 Record Search 35 Mute 35 Start Sequence

39 Web Application Manager Login 39 Live Interface

2_ Overview of DVR

MOBILE APP

APPENDIX

51 Android Phones/Tablets 52 iPhone/iPad

53 Troubleshooting 55 Specifications 59 Dimension 61 Accessories Attached

SAFETY INSTRUCTION

Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged.

1. Please use the power supply enclosed or specified by the manufacturer.

Never operate the equipment by using unspecified power supply.

2. Never push objects of any kind through openings of DVR so as to avoid electric shock or other accidents.

3. Do not put the equipment in a dusty location.

4. Do not place the equipment under the rain or humid environment like the basement.

If the equipment is accidentally in contact with water, please unplug the power cable and immediately contact technical support.

5. Keep the surface of the equipment clean and dry.

Use a soft damp cloth to clean the outer case of the DVR. (Do not use liquid aerosol cleaners.)

6. Do not operate if any problems are found.

If there is a strange smell or sound from the DVR, unplug the power cable and contact technical support.

7. Do not try to remove the DVR cover to avoid electrical shock.

8. Handle with care.

If DVR does not work properly, please contact technical support for repair or replacement.

9. Install and place the equipment in a well ventilated area. The DVR system includes a HDD, which produces large amount of

heat during operation. As a result, do not block the ventilation vents (on the top, bottom, sides and the back of the DVR).

10. The power adapter should only be connected to the DVR. Do not connect it to additional equipment or else the DVR may

restart repeatedly due to insufficient power.

11. Do not install near any heat sources such as radiator, stove, and other machinery or devices (including speakers) that

produce large amount of heat.

12. If the provided plug does not fit your outlet, please technical support for assistance.

13. Protect the power cord from being walked on or pinched particularly at the plug level and each ends of the

cord.

14. Only use attachments/accessories specified by the manufacturer.

15. Only use the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the system.

When a cart is used, use caution when moving the cart and the device to avoid injury from tip-over.

16. Unplug the device during lightning storms or when unused for long periods of time.

17. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such

as power-supply cord or plug is broken, liquid has been spilled or objects have fallen onto the device, exposed to rain or moisture, does not operate normally, or has been dropped.

● OVERVIEW OF DVR

Standards Approvals

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

English _3

Overview of DVR

FRONT PANEL

DVR is short for Digital Video Recorder.

Front panel for DVR with 8 channels for SDR-B74301

Type Key or indicator Identification Functions

a b c

REC NET PWR

USB

d e

a b c d e

HDD indicator REC If the "Red" indicator flashes, the hard drive is being read or written to.

Status lamp

IR port Receive IR signal from Remote Controller.

Net indicator NET Display network connection and data transfer status.

Power indicator PWR If the "Blue" indicator is on, DVR is getting power normally.

USB USB USB port

4_ Overview of DVR

REAR PANEL

Back panel for SDR-B74301

2 4

AUDIO INPUT

1 3 5 7

2 4 6 8

AUDIO

OUTPUT

VIDEO INPUT

HDMI VGA

egh f d c

Physical Interface Connection

VGA port Connect with VGA display devices, such as PC monitor.

LAN: (RJ45)

Network port

Power port Connect with the power supply DC12V 2A, included with the device

USB port Connect with USB.

HDMI Connect with HDMI display devices, such as PC monitor.

Video input Connect with CH1-8 (analog) video input device, standard BNC port

Audio output Audio signal output, RCA port

Audio input Connect with CH1-4 audio input signals, RCA port

Connect with LAN, Ethernet cable.

LAN

12V

● OVERVIEW OF DVR

English _5

Overview of DVR

REMOTE CONTROLLER

Operation of remote controller

Channel select 1-8; Numeric key

Multiple display mode

Select key/Edit key

ALL

MUTE

Mute on/off

SEL

Numeric key

Enter into Main menu/Exit

SUBMENU

Go to Submenu

Up arrow key, volume increase

Left/Right key; Decrease/Increase parameter value of

Enter into record search menu/Play key

control bar.

Rewind key

Record key

Down arrow key, Volume decrease

Forward key

Stop manual record; stop playing

Pause/Step forward key

6_ Overview of DVR

INSTALL HARD DRIVE

1 3 5 7

2 4

2 4 6 8

AUDIO OUTPUT

HDMI VGA

LAN

12V

AUDIO

INPUT

VIDEO INPUT

USB

REC NET PWR

USB

REC NET PWR

1 3 5 7

2 4

2 4 6 8

AUDIO OUTPUT

HDMI VGA

LAN

12V

AUDIO INPUT

VIDEO

INPUT

HDD is pre-installed. If you want to replace hard disk drive, please refer to the following instruction. Please do not remove the hard drive when DVR

is operating.

Installation of Hard Drive

1. Unplug the DVR to turn the power off. Using a screwdriver, remove the screws from the side and back panels, and then

remove the top cover.

2. Connect data and power cables of hard drive to the motherboard. Mount the hard drive by mounting it onto the rack and

connecting the power and data cables. Two groups of screw mounting holes are provided on the base frame of the DVR, respectively for installation of a 3.5" hard drive and 2.5" hard drive. Screw the hard drive in place according to the size of your hard drive.

● OVERVIEW OF DVR

3. Next, screw the back panel in place, and then the sides.

English _7

Overview of DVR

1 3 5 7

2 4

2 4 6 8

AUDIO

OUTPUT

HDMI VGA

LAN

12V

AUDIO INPUT

VIDEO INPUT

CONNECT EXTERNAL EQUIPMENT

Connect camera signal cable to video input port on the DVR via the BNC connectors. Connect your monitor to the DVR using the VGA or HDMI video cable. Connect DVR to the power supply adapter provided. After all connections are completed, plug the DVR in to perform function checks. Be sure that all audio/video I/O ports are connected properly.

CONNECT CAMERA

Connecting the Camera (SDC-9443BC)

Equipped with the IR LED lights and the illumination sensor, the camera enables you to monitor at all times, day and night. The camera is suitable for both indoor and ourtdoor use.

Do not fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain or moisture.

a b

d e

Name Description

Lens 3.6mm focal length enables you to monitor at a wider field of view

IR LED Infrared LED lights are controlled by the illumination sensor.

Illumination Sensor Detects incoming light to control the IR LED.

BNC Cable BNC terminal for video signal output.

Power Cable Use to power the camera.

8_ Overview of DVR

CONNECT DVR

LAN

12V

2 4

AUDIO INPUT

AUDIO OUTPUT

1 3 5 7

2 4 6 8

HDMI VGA

VIDEO INPUT

PROTECTION OF CABLE FROM WATER

If this product is mounted outdoor, water leakage may occur at gap between cables. As shown below, butyl rubber (available on the market) shall be used to protect from water.

1. Connect power supply and BNC power source.

2. Cover black sheath of the cable (Zone A), and ensure half of butyl rubber can cover the cable joint.

Poor water protection at the cable sheath may cause water leakage. Make sure to wrap tightly.

The water-proof butyl rubber is made of rubber that expands to twice the original length.

If you do not use cable joint, it must be covered with water-proof tape.

● OVERVIEW OF DVR

English _9

Overview of DVR

INSTALLING THE CAMERA

The camera can be installed on the wall, ceiling, shelf or a desired position using the provided mounting bracket.

1. Adhere the installation template onto the ceiling and use it as installation locating tool. (Please refer to Page 21 of Quick

Guide.)

2. Choose an installation site that can sufficiently support the weight of the camera to be installed.

3. Attach the camera mount to the wall using the supplied screws.

4. Adjust the direction of the camera to the desired direction, and tighten the bracket.

5. Adjust camera angle as needed.

6. Connect the camera cable to the camera.

Take caution when installing the camera outdoors because the cable connectors may be wet with moisture or pile up with impurities. Although the camera is IP66 rated, direct exposure to water or moisture may cause problem such as condensation.

10_ Overview of DVR

DVR Boot up

SYSTEM INITIALIZATION

After connecting the DVR power cable to wall outlet, the DVR system initializing screen will appear.

It may take 40 seconds to start up, and the screen may beep 5~6 times.

STARTUP WIZARD

After the DVR startup is complete, the startup wizard will display.

Wizard setting menu includes: Homepage, admin password setting, hard drive management, video recording schedule, basic system configuration, network setup, e-mail and DDNS setting. You can click on "Don't show this window next time" if you do not wish to have the wizard setting to appear next time.

1. Set Admin Password: Please create a user name and password for your

device. Password MUST be 8~13 characters long, and with at least a combination of two types of characters. Retype password: Re-enter the password set above

● DVR BOOT UP

English _11

DVR Boot up

2. Hard Drive Management: Any new disk connected must be formatted before

use. Click on "Select" to highlight the hard drive to be formatted. Click on "Format HDD" and the user login box will appear. Enter the password to log in. Click on "OK" to format the disk when the "Entire Data Will Be Erased. Do You Want To Continue?" dialog box appears. Formatting process is complete when the progress bar is full.

3. Video Recording Schedule: Select the channel and the date to be set. One

week's schedule can be set. The record schedule of the current channel can be copied to any other channel or all channels.

In the Record menu and Record Search menu, when no colors are presented, it means

there are no recordings during that time.

"Green" stands for normal record and "yellow" stands for motion record.

4. General System Configuration: Set the date, time, date format, time format,

language, video format and menu timeouts.

5. Network Configuration (DHCP): In DHCP mode the router will automatically

assign an IP address to DVR. If the DVR fails to obtain an IP address, refer to the DVR Router Guide. If the problem still cannot be resolved, contact technical support.

12_ DVR Boot up

6. Email Configuration: Receive or Send DVR alerts via email.

•

SSL (Secure Socket Layer): This is an industry standard transport protocol that establishes an encrypted link between the web server and browser. This link ensures that all data that passes between the web server and browser remains private and integral. If the setting is incorrect, check you mail server's SMTP port

•

SMTP Port: The mail sending port used by SMTP (Simple Mail Transfer Protocol) server is generally Port 25, or Port 465.

•

SMTP Server: Enter address of the mail server you want to connect to.

•

Sender address: Enter sender's mail address, which must correspond to the server used. For example, mailbox "aaa@gmail.com" should correspond to server "smtp.gmail.com".

•

Recipient address: Recipient's mail address, used to receive alarm image and message from DVR side. If system alarms continually and sends Email images frequently, save the images to another location or remove them, so as to avoid excessive space occupation and thereby affect your normal use of mailbox.

•

Time interval: A mail will be sent every three minutes by default. If the time interval for mail notification is set too short, email server may deem mails as junk mails, so they cannot be transferred normally.

7. DDNS SETTING. User may set DDNS under network type of PPPoE/Static/

DHCP after applying dynamic domain service. User may remotely access DVR through domain by using browser in the form of http://applied domain: mapped HTTP port number when using DDNS domain name to access DVR.

•

Server address: Select dynamic domain name server provider. Available domain name servers (DDNS_3322, DYNDNS, NO_IP, CHANGEIP, DNSEXIT)

•

Host name: dynamic domain name of the host obtained from dynamic domain name service provider upon registration, for example, dvr2016.no-ip. org

•

User Name: The user name registered upon application for dynamic domain name.

•

Password: The password set upon registration.

•

Click on "Test DDNS". If connection succeeds, it will be indicated that "DDNS Test is Successful! Perform remote access to DVR by using dynamic domain name, for example, http://dvr2016.no-ip.org: HTTP port number (e.g. 19010)

8. Click on "Save" to finish setting of startup wizard.

● DVR BOOT UP

English _13

DVR Boot up

MAIN INTERFACE

In real-time preview mode: right click on any area to access the desired menu. Right click on it to open a context menu, whose menu items may vary depending on the specific condition, such as sign-in, sign-out, split screen mode and various operation conditions.

Left click on any channel to access shortcut menu, where operations such as image capture, recording and image zoom-in are available.

a b c d

e fghi

j k l m n o p q

The video recording marks are as shown below:

means common Recording.

means Motion detection recording.

means Motion detection without recording.

Component Name Function

Camera Type A means AHD camera. Absence of it means 960H camera.

Date & Time Display current date and time

Channel Name Display channel name

SAMSUNG Logo The logo of SAMSUNG will display only when video is loss.

Image Capture Make a snapshot of current video

Manual Recording Enable or disable manual recording

Quick Playback Make playback of the last 5 minutes of the video

Electronic Zoom-In Hold and drag mouse cursor to select a frame of current video to zoom in.

Channel Color Setting Set hue, brightness, contrast and saturation of current channel.

Main Menu Access the main menu

14_ DVR Boot up

Component Name Function

Lock Sign out or access sign-in page.

Four-Channel Layout Display four channels of video.

Nine-Channel Layout Display nine channels of video.

N-Channel Layout

Polling Start or stop polling.

Sound Adjust volume or mute.

Playback Access video retrieval page.

Display six channels of video.

Display eight channels of video.

● DVR BOOT UP

English _15

DVR Menu

POPUP MENU

After finishing system initialization, right click the mouse on preview interface or slide the mouse to the bottom of screen to enter into Pop-up Menu. Now you could perform parameter setting and operate on Main Menu, Multi-screen, Record Search, Sequence, Volume and Brightness settings.

The options in the pop-up menu may vary slightly according to different parameter settings and application environment. The options in the menu will be explained in detail in the following chapters.

16_ DVR Menu

MAIN MENU GUIDE

Display

Record

Live

Output

Private Zone

● DVR MENU

Record

Record Schedule

Main stream

Substream

Main Menu

Parameter

Record Search

Device

System

Capture

Network

Alarm

General

Events

Picture

HDD

Cloud Storage

General

Users

Info

Log

Capture

Capture Schedule

Network

Email Schedule

DDNS

RTSP

FTP

Motion

General

DST

NTP

Advanced

Shutdown

Maintain

Events

English _17

DVR Menu

MAIN MENU

On LIVE mode, click the mouse button, or [Menu] button on the remote controller, or click [ ] icon on the toolbar to enter the main menu screen.

If system interface is locked, refer to section 3.3 to unlock by entering your password. In Main Menu mode, you can make settings for Parameter, Record Search, Device, System, Advanced and Shutdown.

Parameter

Live

Go to "Main Menu" ; "Parameter" ; "Display" ; "Live"

•

Channel: Select the channel in the drop-down list.

•

Channel Name: Channel name, support up to 8 characters.

•

Show Name: Showing Channel name

•

Record Time: Enable or disable displaying system time in recording.

•

OSD Position: Adjustment the position of channel name and time display

•

Color: Click "Setup" to access the color settings

•

Covert: Enable/Disable Video hiding.

•

AHD EQ: Switch of AHD signal equalizer.

•

Show Time: Enable or disable the time displayed in the live interface.

•

Copy: Copy the parameters in the channel to any other channel or all channels.

Adjust the brightness, hue, contrast and saturation of the image in selected channel in "Live" interface.

To modify the parameter value in sub-menu and make it effective, click "Save" after

modification and a dialog box with message "Save parameters successful!" will pop up. Click "OK" in the interface, then "Exit" to exit the menu. If you want to cancel the modification, click "Cancel" to exit.

Use Virtual Keyboard

Virtual keyboard window will be displayed for input. Click on the desired characters to apply them. Press <Shift> to switch to input of upper-case letters. Press <Shift> again to switch to input of special characters. The virtual keyboard is used in the same way as with physical keyboard. For input of password, use letters and special characters other than <\> and <">.

18_ DVR Menu

Output

Go to "Main Menu" ; "Parameter" ; "Display" ; "Output" to enter into the interface.

•

Video Output: Live Output

•

Sequence Mode: layout1, layout4, layout6

•

SEQ Time: Sequence time is set 5 seconds by default. User may set it as required up to 300 seconds

•

VGA/HDMI Resolution: For VGA output or HDMI output, the optional resolution includes 1024×768, 1280×1024, 1440×900, 1280×720, 1920×1080

•

Transparency: Adjust menu transparency in the range of 0-128.

•

Support Overscan: Support HDMI overscan

Private Zone

Go to "Main Menu" ; "Parameter" ; "Display" ; "Private Zone" to enter into the interface.

Privacy Zone is to block certain area(s) in the camera's field of view from recording in the selected channel.

1. Select the number of the zone(s) to be blocked (maximum of 4 zones can

be set for single channel)

2. Click "Setup" to adjust the position of the zone.

3. After finish setting, right click the mouse to return to the "Privacy Zone"

page.

4. Click "Save" to save the setting.

● DVR MENU

English _19

+ 44 hidden pages