SAMSUNG SD-8550 Service Manual
Samsung Electronics 2-1
2. Reference
2-1. How To Install & Remove The Apparatus
Holder
-. Use only the supplied mounting hardware for safe and secure installation.
-. Please consult your nearest dealer if you get any problems with installation.
Note!
-. Remove transport screw (You can not insert a CD until the screw is removed)
-. Insert the holder into the car radio slot. Fasten the holder by pulling and bending the tabs which are located around the
holder as illustrated.
-. Press the open knob to open up the front panel and detach it by pulling it towards you.
* Insert the enclosed handles into the slits of the unit, as illustrated, while pressing the handle lightly, then pull the unit out of the holder.
2-2 Samsung Electronics
The pins in the ISO connector have the following functions (connector seen from the rear)
4. Back-up+12V :YELLOW
5. +12V (electric antenna : BLUE
6. Dimmer : PINK
7.
+12V supply(from ignition lock)
: RED
8. Earth : BLACK
A. Electric Connections
1. +Right Rear :VIOLET
2. - Right Rear :VIOLET/BLACK
3. +Right Front : GRAY
4. - Right Front : GRAY/BLACK
5. +Left Front : WHITE
6. - Left Front :WHITE/BLACK
7. +Left Rear : GREEN
8. - Left Rear :GREEN/BLACK
B. Loud Speaker
10A
C. Fuse
-.The red cable must be connected via the car’s ignition lock to prevent unwanted discharge of the battery if it is
not used for longer periods of time
.
Note!
2-2.Wiring Connections
Loading...