High Resolution Zoom
Color Camera
User Manual
SCZ-2273 SCZ-2373
High Resolution Zoom Color Camera
User Manual
Copyright
©2013 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin shall have the right to change the contents of this manual without prior notice for the purpose of enhanced performance.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
•If the system behaves abnormally because you run a program irrelevant to the system operation.
•Deteriorated performance or natural worn-out in process of time
Design and specifications are subject to change without prior notice.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
■ SCZ-2273/2373 SERIES
• NTSC MODEL |
• PAL MODEL |
SCZ-2273/2373N |
SCZ-2273/2373P |
■ MODEL DESCRIPTION
• SCZ-2273/2373X
_
SIGNAL SYSTEM
•SIGNAL SYSTEM
N → NTSC MODEL P → PAL MODEL
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
•To prevent damage which may result in fi re or electric shock hazard, do not expose this appliance to rain or moisture.
•To prevent injury, this apparatus must be securely attached to the fl oor/wall in accordance with the installation instructions.
WARNING
1.Be sure to use only the standard adapter that is specifi ed in the specifi cation sheet. Using any other adapter could cause fi re, electrical shock, or damage to the product.
2.Incorrectly connecting the power supply or replacing battery may cause explosion, fi re, electric shock, or damage to the product.
3.Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fi re.
4.Securely plug the power cord into the power receptacle. insecure connection may cause fi re.
5.When installing the camera, fasten it securely and fi rmly. The fall of camera may cause personal injury.
4_ safety information
6. |
Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers |
|
|
|
fi lled with water on top of the camera. doing so may cause personal injury due to fi re, |
|
|
|
electric shock, or falling objects. |
|
|
7. |
Do not install the unit in humid, dusty, or sooty locations. doing so may cause fi re or |
|
|
|
electric shock. |
● |
|
|
|
||
|
|
|
|
8. |
If any unusual smells or smoke come from the unit, stop using the product. in such case, |
SAFETY |
|
|
|||
|
in such a condition may cause fi re or electric shock. |
|
|
|
immediately disconnect the power source and contact the service center. continued use |
INFORMATION |
|
10.When cleaning, do not spray water directly onto parts of the product. doing so may |
|
||
9. |
If this product fails to operate normally, contact the nearest service center. never |
|
|
disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifi cations or attempted repair.)
cause fi re or electric shock.
CAUTION
1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference.
2.Do not install in a location subject to high temperature (over 55°C), low temperature (below -10°C), or high humidity. Doing so may cause fi re or electric shock.
3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
4.Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fi re or damage to the product.
5.Keep out of direct sunlight and heat radiation sources. It may cause fi re.
6.Install it in a place with good ventilation.
7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.
8.Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10.Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.
English_5
safety information
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
1)This device may not cause harmful interference, and
2)This device must accept any interference received including interference that may cause undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
6_ safety information
important safety instructions
1. |
Read these instructions. |
|
|
||
2. |
Keep these instructions. |
|
|
||
3. |
Heed all warnings. |
|
|
||
4. |
Follow all instructions. |
|
|
||
5. |
Do not use this apparatus near water. |
● |
|
||
6. |
Clean only with dry cloth. |
SAFETY |
|
||
|
|||||
7. |
Do not block any ventilation openings. Install in accordance with the manufacturer’s |
|
|||
|
instructions. |
|
|||
8. |
Do not install near any heat sources such as radiators, heat registers, or other apparatus |
INFORMATION |
|
||
|
|
||||
|
(including amplifi ers) that produce heat. |
|
|
||
9. |
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized |
|
|
||
|
plug has two blades with one wider than the other. A grounding type plug has two |
|
|
||
|
blades and a third grounding prong. The wide blade or the third prong is provided for |
|
|
||
|
your safety. If the provided plug does not fi t into your outlet, consult an electrician for |
|
|
||
|
replacement of the obsolete outlet. |
|
|
||
10.Protect the power cord from being walked on or pinched particularly at plugs, |
|
|
|||
|
convenience receptacles, and the point where they exit from the apparatus. |
|
|
||
11.Only use attachments/accessories specifi ed by the manufacturer. |
|
|
|||
12.Use only with cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold |
|
|
|||
|
with the apparatus. |
|
|
||
13.Unplug this apparatus when a card is used. Use caution when moving |
|
|
|||
|
the cart/ apparatus combination to avoid injury from tip-over. |
|
|
||
14.Refer all servicing to qualifi ed service personnel. Servicing is |
|
|
|||
|
required when the apparatus has been damaged in any way, such |
|
|
||
|
as powersupply cord or plug is damaged, liquid has been spilled |
|
|
||
|
or objects have fallen into the apparatus, the apparatus has been |
|
|
||
|
exposed to rain or moisture, does not operate normally, or has been dropped. |
|
|
||
|
|
|
Apparatus shall not be exposed to dripping or splashing and no |
|
|
|
|
|
objects fi lled with liquids, such as vases, shall be placed on the |
|
|
|
|
|
apparatus |
|
|
|
|
|
|
|
|
|
|
|
Samsung Techwin cares for the environment at all product |
|
|
|
|
|
manufacturing stages to preserve the environment, and is taking a |
|
|
|
|
|
number of steps to provide customers with more environment-friendly |
|
|
|
|
|
products.The Eco mark represents Samsung Techwin’s will to create |
|
|
|
|
|
environment-friendly products, and indicates that the product satisfies |
|
|
|
|
|
the EU RoHS Directive. |
|
|
|
|
|
|
|
|
English_7
contents
INTRODUCTION
9
CONNECTION
13
CAMERA OPERATION
17
TROUBLESHOOTING
37
SPECIFICATIONS
38
SAMSUNG-T PROTOCOL COMMAND DESCRIPTION
42
9Features
10What’s included
11Component names and functions
13Connecting to Monitor
13Connecting to Power
14Using Coaxial Communications
15Connecting to 8P Control Terminal
17Menu Configuration
18Menu Setup
37 Troubleshooting
38 Specifications
40 Dimensions
42SAMSUNG-T Protocol Command Description
8_ contents
introduction
FEATURES
y 37x/27x Optical Zoom
The built-in SCZ-2373(37x)/2273(27x) optical zoom lens is a highly durable component. It features auto focus, auto iris, and zoom functions.
y High Resolution |
● |
|
The high-performance SV-V DSP chip effectively removes low-light gain noise and |
INTRODUCTION |
|
By adopting a diagonal 6mm (1/3”) 520,000 pixel (NTSC), 610,000 pixel (PAL) Sony 960H |
|
|
Exview HAD CCD II, the camera produces clear picture quality with a horizontal resolution |
|
|
of 680TV lines in ER mode . |
|
|
y SSNR 3 (Samsung Super Noise Reduction) |
|
|
ghosting to provide clear images even in dark environments. |
|
|
y DIS (Digital Image Stabilizer) |
|
|
Digital image stabilization compensates camera shakings for enhanced image capture. |
|
|
y SSDR (Samsung Super Dynamic Range) |
|
|
For images with high contrast between bright and dark areas from diffi cult lighting |
|
|
conditions such as backlighting, this camera selectively illuminates darker areas while |
|
|
|
|
|
retaining the same light level for brighter areas to even out the overall brightness. |
|
|
y DAY&NIGHT(ICR) |
|
|
This camera has a function that automatically selects the mode that is appropriate for |
|
|
daytime or night-time conditions.The COLOR mode operates in daytime conditions to |
|
|
provide optimum colors, and BW mode operates in night-time conditions to enhance the |
|
|
defi nition of the image. |
|
|
y Motion Detection |
|
|
Since the camera detects motion without any additional external sensor, you can monitor |
|
|
activity more effi cient. |
|
|
y Miscellaneous Functions |
|
|
HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, |
|
|
MOTION DETECTION and PRIVACY functions are provided. |
|
|
y Communication |
|
|
RS-485, Coaxial communication methods are supported. |
|
|
- RS-485 Communications |
|
|
: SAMSUNG-T, SAMSUNG-E, Pelco-P, Pelco-D, Panasonic, Bosch, Honeywell, AD, |
|
|
Vicon. |
|
|
- Coaxial Communications |
|
|
: Pelco Coaxitron |
|
|
English_9
introduction
yOSD
The camera’s OSD is complimented by 18 foreign languages.
-NTSC : Korean, English, French, Spanish, Japanese, Portuguese
-PAL : English, French, German, Spanish, Italian, Chinese, Russian, Czech, Polish, Portuguese, Romanian, Serbian, Swedish, Danish, Turkish
WHAT’S INCLUDED
High Resolution Zoom
Color Camera
Quick Guide |
SCZ-2373 |
Main Body |
Quick Manual |
8-PIN CABLE ASSY |
10_ introduction
COMPONENT NAMES AND FUNCTIONS
TOP |
|
BOTTOM |
Tripod Mounting Bracket Screw Hole
Used to fix tripod mounting bracket on top of the camera.
Tripod Mounting Hole
Used to install the camera on an optional tripod. The tripod must be equipped with screws with specifications shown on the right.
L
1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), or 0.197" (ASA standard)
INTRODUCTION ●
IAttach the bracket to the top of the camera. Use screws included in the package or their equivalent (less than 6mm). Otherwise, the bracket may not
assemble to the camera properly.
English_11
introduction
BOTTOM VIEW
|
|
|
|
|
|
|
|
Key Buttons
y Following buttons control zoom, focus, and auto focus functions.
WIDE button |
: To widen the view. (ZOOM OUT) |
TELE button |
: To close in on a far object. (ZOOM IN) |
F-NEAR button |
: To see a near object clearly. |
F-FAR button |
: To see a far object clearly. |
Pressing the 'SET' button locks the zoom control function of these buttons and prompts the main setup menu.
yMain setup menu can be navigated using these buttons. SET : To access the main setup menu.
UP (TELE button) : To move the arrow indicator to up.
DOWN (WIDE button) |
: To move the arrow indicator to down. |
LEFT (F-NEAR button) |
: To move the arrow indicator to left. |
RIGHT (F-FAR button) |
: To move the arrow indicator to right. |
Power Input Terminal
Power supply terminal (DC12V±10%/AC24V±10%)
Power LED
Illuminates when power is supplied.
Video Output Jack
Used to connect an external video monitor in jack.
RJ-45 JACK
Terminals, such as RS-485 communications, MD OUT, ZOOM, and FOCUS, EX_DN are areincluded.
12_ introduction
connection
CONNECTING TO MONITOR
Connect Video Out Jack to the monitor's Video In jack as shown below.
CCD Camera |
Monitor |
CONNECTION ●
yConnection methods may vary depending on the video equipment. Please refer to the model specifi c instruction manual.
yConnect cables with the unit powered down.
CONNECTING TO POWER
Power Input Terminal
DC 12V, 500mA / AC24V, 500mA
IUse of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.
Standard voltage for camera operation : DC12V ± 10%/ AC 24V ± 10%
The wire is polarized. Match ‘+’ and ‘-’ terminals properly.
English_13
USING COAXIAL COMMUNICATIONS
The camera can be controlled by using external controllers like a Remote controller. (RS-485 Communication)
•Coaxial Communications System
•OSD Control method
•If you set the sensitivity level of the sub menu item (of COAX) to “Low”, you have to press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu. (To prevent an error by noise from the DVR)
CAMERA |
DVR |
CONTROLLER |
|
|
|
SET |
MENU/ENTER |
OSD KEY |
|
|
|
UP |
UP KEY |
JOYSTICK UP |
DOWN |
DOWN KEY |
JOYSTICK DOWN |
|
|
|
LEFT |
LEFT KEY |
JOYSTICK LEFT |
|
|
|
RIGHT |
RIGHT KEY |
JOYSTICK RIGHT |
<DVR>
|
|
• |
|
: BNC |
|
|
|
||
|
|
|
||
<CONTROLLER> |
• ---- : RS-485 |
•Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.
Distance |
Recommended Cable Specification |
|
|
300m |
3C2V(RG-59/U) |
|
|
450m |
5C2V(RG-6/U) |
|
|
600m |
7C2V(RG-11/U) |
|
|
IIt is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.
14_