Samsung SCX-6555 Instructions Manual

SAMSUNG

®

SCX-6555

TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [e-mail]

www.uninetimaging.com

SAMSUNG SCX-6555 TONER CARTRIDGE

The Samsung SCX-6555 is a print/scan/copy/fax engine that runs at 1200 DPI with speeds of up to 55 ppm and has a first page
out in less than eight seconds. The monthly duty cycle is 250,000 pages per month. These machines come in multiple
configurations with different paper trays, duplexing, 80Gb hard drives, multi-bin mailboxes, and finishers all available. These are
not small machines, with dimensions of 25”(W) x 19”(D) x 24”(H), and a base weight of 98 lbs.

There is a separate toner and drum cartridge used in these machines. The Samsung toner cartridge SCX-D6555A is rated for
25,000 pages, and has a list price of $87.99 USD. The chips on these cartridges need to be replaced each cycle. The drum unit
(part # SCX-R6555A) is rated for 80,000 pages and will be covered in separate instructions.

These are extremely easy cartridges to remanufacture. They take minimal time and really don’t need to be tested, as there is
nothing to wear out. All the normal wear parts like the PCR, developer roller, etc. are in the drum unit.

These cartridges only consist of a supply hopper with a waste chamber. Although there is one part that you do need to be
aware of, that can wear down on multiple-use cartridges. This point is covered at the end of these instructions.

CURRENT MACHINES BASED ON THE SAMSUNG SCX-6555 ENGINE

Samsung SCX-6545N
Samsung SCX-6555N

SAMSUNG SCX-6555 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

REMANUFACTURING THE SAMSUNG

SCX-6555 TONER CARTRIDGES

By Mike Josiah and the Technical Staff at UniNet

© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [e-mail]

www.uninetimaging.com

Shown a basic diagram of the printing process used in this engine.

All very basic, so there is no need to go into the actual theory.

Cartridge troubleshooting/information are covered at the end of this article.

SUPPLIES REQUIRED

1. 560g new replacement toner for use in the Samsung SCX-6555

2. Replacement chip

TOOLS REQUIRED

1. Phillips head screwdriver

2. Small common screwdriver

3. Vacuum approved for toner

1. Remove the two screws located on the waste chamber. 2. Remove the screw that is located under the colored
plastic handle.

3. Remove the waste chamber. There are two small gears that will come loose.

Be careful not to lose them.

Slide the cover open and vacuum/blow the waste chamber clean.

SAMSUNG SCX-6555 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [e-mail]

www.uninetimaging.com