Samsung SCX-6345N, SCX-6345 Service Manual

Manual
SERVICE
DIGITAL LASER MFP The keynote of Product
The alternative of A3 copier models.
1. Print Speed: Simplex Print: Up to 45 ppm/Ltr, 43 ppm/A4 Duplex Print: Up to 40 ppm/A4
3. Device Memory(SDRAM): 256MB System Memory (FAX:16MB), Max. 384MB Option : 128MB (DIMM Slot 1EA)
4. T oner(20K), Drum(60K)
5. Standard: Copy Direct Print & N/W Print Direct Scan (USB) DADF HDD(40GB)
6. Option: N/W Scan/OEK(Option Enable Key) FAX/Smart DAA, Single LIU SCF (550 sheet) Finisher with Stapler Ext. Memory: 256MB Stand: Short/T all
7. Machine Life: 1,000K Pages Average Monthly Print Volume: 10K Pages
SCX-6345N
DIGITAL LASER MFP
SCX-6345 Series
SCX-6345N
ELECTRONICS
Samsung Electronics Co.,Ltd. September. 2006 Printed in Korea. VERSION NO. : 1.00 CODE : JC-0177A
* This service manual is a property of Samsung Electronics Co., Ltd.
Any unauthorized use of Manual can be punished under applicable international and/or domestic law.
* This service manual is also provided on the web, the ITSELF
system Samsung Electronics Co., Ltd.
“http://itself.sec.samsung.co.kr”
Contents
1. Precautions
1.1 Safety W arning 1-1
1.2 Caution for safety
1-2
1.3 ESD Precautions
1-5
1.4 Super Capacitor or Lithium Battery Precautions
1-5
2. Product Specification
2.1 Product Overview 2-1
2.2 Prouduct Specification
2-3
2.3 General specifications
2-5
2.4 Printer specifications
2-6
2.5 Copier specifications
2-6
2.6 Scanner specifications
2-7
2.7 Facsimile specifications (optional)
2-7
2.8 Scan to Email
2-8
2.9 NW Scan (Scan to SMB/FTP/HTTP(S))
2-8
2.10 SmarThru Workflow
2-9
2.1 1 Paper Handling
2-10
2.12 Model Comparison
2-12
2.13 PM(Preventive Maintenance) List
2-13
3. System Overview
3.1 System Lay-out 3-2
3.2 System Description
3-3
3.3 Engine Section
3-15
3.4 Communication Specifications
3-16
3.5 Scanning Section
3-22
Continued
3.6 Paper Feeding 3-23
3.7 T oner Cartridge Specification
3-23
4. Alignment and Adjust m e n t s
4.1 Paper path 4-1
4.2 Clearing Paper Jams
4-2
4.3 Abnormal Image Printing and Defective Roller
4-12
4.4 User Mode
4-13
4.5 Service Mode
4-28
4.6 Consumables and Replacement Parts
4-50
4.7 Option Installing
4-59
4.8 Display LED and Error Messages
4-61
5. Disassembly and Reassembly
5.1 General Precautions on Disassembly 5-1
5.2 Customer Replaceable Units
5-6
5.3 General Disassembly
5-13
6. Troubleshooting
6.1 Procedure of Checking the Symptoms 6-1
6.2 Solution
6-2
Continued
7. Exploded Views & Parts List
7.1 Main 7-2
7.2 Cover Unit
7-3
7.3 Main Frame
7-4
7.4 Base Frame
7-5
7.5 Main Drive
7-6
7.6 Exit Drive
7-7
7.7 Exit Ass'y
7-8
7.8 Fuser
7-9
7.9 Pick Up Ass°Øy
7-10
7.10 Side Duplex
7-1 1
7.1 1 MP Unit
7-12
7.12 MPTray
7-13
7.13 OPE(SCX-6345N)
7-14
7.14 Platen Ass'y
7-15
7.15 DADF Sub
7-16
7.16 DADF Ass'y
7-17
7.17 Cassette
7-18
7.18 SCF
7-19
7.19 Fax
7-20
7.20 Finisher
7-21
7.20-1 Main
7-21
7.20-2 Frame Unit
7-22
7.20-3 Stacker Unit
7-23
7.20-4 Extension T ray Unit
7-24
7.20-5 Ejector Unit
7-25
7.20-6 Compile Unit
7-26
7.20-7 Feed Unit
7-27
Continued
8. Block diagram
8.1 System Block Diagram 8-1
8.2 DADF Block Diagram
8-2
8.3 DADF Control Block Diagram
8-3
9. Connection Diagram
9.1 Connection Diagram 9-1
9.2 SCF Connection Diagram
9-2
9.3 DADF Connection Diagram
9-3
9.4 OPMain Connect Diagram
9-4
10. Finisher Unit
10.1 Summary of the Finisher Unit 10-1
10.2 System Configuration
10-2
10.3 SPECIFICATION
10-3
10.4 PERFORMANCE
10-5
Continued
11. Network Printer Server
1 1.1 Network Printer 1 1-1 1 1.2 Printer Connection Method
1 1-2
1 1.3 Network Card Firmware
1 1-6
1 1.4 Network Card Firmware : Upgrade
1 1-6
1 1.5 SyncThru Web Admin Service Web based
Printer Management Solution
1 1-7
1 1.6 Samsung SyncThru W eb Service:
General Information (MFP)
1 1-17
1 1.7 Samsung SyncThru W eb Service:
Machine Settings (MFP)
1 1-18
1 1.8 Samsung SyncThru W eb Service: Network Settings
1 1-19
1 1.9 Samsung SyncThru W eb Service: Maintenance
1 1-20
1 1.10 Samsung SyncThru W eb Service: Support
1 1-21
1 1.11 Samsung SyncThru Web Service: Service (MFP)
1 1-22
1 1.12 Samsung SyncThru W eb Service: Authentication
1 1-23
1 1.13 Samsung SyncThru W eb Service:
Authentication (Local Authentication)
1 1-24
1 1.14 Samsung SyncThru W eb Service:
Authentication (Network Authentication)
1 1-25
1 1.15 Samsung SyncThru W eb Service:
LDAP Server Setup
1 1-28
1 1.16 Samsung SetIP
1 1-31
1 1.17 TCP/IP Printing Protocol
1 1-32
1 1.18 Management Protocol
1 1-33
1 1.19 HTTP
1 1-33
1 1.20 Network models
1 1-34
Continued
12. Option Install Guide
12.1 Option List 12-1
12.2 Option Installation Guide
12-2
13. Reference Information
13.1 T ool for Troubleshooting 13-1
13.2 Acronyms and Abbreviations
13-2
13.3 The Sample Pattern for the T est
13-8
13.4 Wireless LAN
13-9
13.5 Selecting a location
13-10
Precautions
Samsung Electronics
Service Manual
1-1
1
1
1. Precautions
In order to prevent accidents and to prevent damage to the equipment please read the precautions listed below carefully before servicing the printer and follow them closely .
1.1 Safety W arning
(1) Only to be serviced by appropriately qualified service engineers.
High voltages and lasers inside this product are dangerous. This printer should only be serviced by a suitably trained and qualified service engineer.
(2) Use only Samsung replacement parts
There are no user serviceable parts inside the printer . Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and create electric shock or fire haz-ards.
(3) Laser Safety Statement
The Printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class 1(1) laser products, and elsewhere, it is certified as a Class I laser product con-forming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition.
Warning >> Never operate or service the printer with the protective cover removed from Laser/Scanner assembly . The
reflected beam, although invisible, can damage your eyes. When using this product, these basic safety pre-cautions should always be followed to reduce risk of fire, electric shock, and injury to persons.
CAUTION - INVISIBLE LASER RADIATION
WHEN THIS COVER OPEN. DO NOT OPEN THIS COVER.
VORSICHT - UNSICHTBARE LASERSTRAHLUNG,
WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
ATTENTION - RAYONNEMENT LASER INVISIBLE EN CAS
D’OUVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU.
ATTENZIONE - RADIAZIONE LASER INVISIBILE IN CASO DI
APERTURA. EVITARE L’ESPOSIZIONE AL FASCIO.
PRECAUCION - RADIACION LASER IVISIBLE CUANDO SE ABRE.
EVITAR EXPONERSE AL RAYO.
ADVARSEL. - USYNLIG LASERSTRÅLNING VED ÅBNING, NÅR
SIKKERHEDSBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.
ADVARSEL. - USYNLIG LASERSTRÅLNING NÅR DEKSEL
ÅPNES. STIRR IKKE INN I STRÅLEN. UNNGÅ EKSPONERING FOR STRÅLEN.
VARNING - OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN. STRÅLEN ÄR FARLIG.
VARO! - AVATTAESSA JA SUOJALUKITUS OHITETTAESSA
OLET ALTTIINA NÄKYMÄTTÖMÄLLE LASER- SÄTEILYLLE ÄLÄ KATSO SÄTEESEEN.
Samsung Electronics
Service Manual
Precautions
1-2
1.2 Caution for safety
1.2.1 Toxic material
This product contains toxic materials that could cause illness if ingested.
(1) If the LCD control panel is damaged it is possible for the liquid inside to leak. This liquid is toxic. Contact with the skin
should be avoided, wash any splashes from eyes or skin immediately and contact your doctor. If the liquid gets into the mouth or is swallowed see a doctor immediately.
(2) Please keep Drum cartridge and Toner Cartridge away from children. The toner powder contained in the Drum
cartridge and T oner Cartridge may be harmful and if swallowed you should contact a doctor .
1.2.2 Electric Shock and Fire Safety Precautions
Failure to follow the following instructions could cause electric shock or potentially cause a fire.
(1) Use only the correct voltage, failure to do so could damage the printer and potentially cause a fire or electric
shock.
(2) Use only the power cable supplied with the printer. Use of an incorrectly specified cable could cause the cable
to overheat and potentially cause a fire.
(3) Do not overload the power socket, this could lead to overheating of the cables inside the wall and could lead to
a fire.
(4) Do not allow water or other liquids to spill into the printer, this can cause electric shock. Do not allow paper
clips, pins or other foreign objects to fall into the printer these could cause a short circuit leading to an electric shock or fire hazard..
(5) Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. When
servicing the printer remove the power plug from the wall socket.
(6) Use caution when inserting or removing the power connector. The power connector must be inserted com-
pletely otherwise a poor contact could cause overheating possibly leading to a fire. When removing the power connector grip it firmly and pull.
(7) Take care of the power cable. Do not allow it to become twisted, bent sharply round corners or other wise
damaged. Do not place objects on top of the power cable. If the power cable is damaged it could overheat and cause a fire or exposed cables could cause an electric shock. Replace a damaged power cable immediately, do not reuse or repair the damaged cable. Some chemicals can attack the coating on the power cable, weakening the cover or exposing cables causing fire and shock risks.
(8) Ensure that the power sockets and plugs are not cracked or broken in any way. Any such defects should be
repaired immediately. Take care not to cut or damage the power cable or plugs when moving the machine.
(9) Use caution during thunder or lightening storms. Samsung recommend that this machine be disconnected from
the power source when such weather conditions are expected. Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions.
(10) Avoid damp or dusty areas, install the printer in a clean well ventilated location. Do not position the machine
near a humidifier. Damp and dust build up inside the machine can lead to overheating and cause a fire.
(1 1) Do not position the printer in direct sunlight. This will cause the temperature inside the printer to rise possibly
leading to the printer failing to work properly and in extreme conditions could lead to a fire.
(12) Do not insert any metal objects into the machine through the ventilator fan or other part of the casing, it could
make contact with a high voltage conductor inside the machine and cause an electric shock.
Precautions
Samsung Electronics
Service Manual
1-3
1.2.3 Handling Precautions
The following instructions are for your own personal safety, to avoid injury and so as not to damage the printer
(1) Ensure the printer is installed on a level surface, capable of supporting its weight. Failure to do so could cause
the printer to tip or fall.
(2) The printer contains many rollers, gears and fans. Take great care to ensure that you do not catch your fingers,
hair or clothing in any of these rotating devices.
(3) Do not place any small metal objects, containers of water, chemicals or other liquids close to the printer which if
spilled could get into the machine and cause damage or a shock or fire hazard.
(4) Do not install the machine in areas with high dust or moisture levels, beside on open window or close to a
humidifier or heater. Damage could be caused to the printer in such areas.
(5) Do not place candles, burning cigarettes, etc on the printer, These could cause a fire.
1.2.4 Assembly / Disassembly Precautions
Replace parts carefully, always use Samsung parts. Take care to note the exact location of parts and also cable routing before dismantling any part of the machine. Ensure all parts and cables are replaced correctly. Please carry out the following procedures before dismantling the printer or replacing any parts.
(1) Check the contents of the machine memory and make a note of any user settings. These will be erased if the
mainboard or network card is replaced. (2) Ensure that power is disconnected before servicing or replacing any electrical parts. (3) Disconnect printer interface cables and power cables. (4) Only use approved spare parts. Ensure that part number, product name, any voltage, current or temperature
rating are correct. (5) When removing or re-fitting any parts do not use excessive force, especially when fitting screws into plastic. (6) Take care not to drop any small parts into the machine. (7) Handling of the OPC Drum
- The OPC Drum can be irreparably damaged if it exposed to light. Take care not to expose the OPC Drum either to direct sunlight or to fluorescent or incandescent room lighting. Exposure for as little as 5 mins can damage the surface’s photoconductive properties and will result in print quality degradation. Take extra care when servicing the printer . Remove the OPC Drum and store it in a black bag or other lightproof container. Take care when working with the covers(especially the top cover) open as light is admitted to the OPC area and can damage the OPC Drum.
- Take care not to scratch the green surface of OPC Drum Unit. If the green surface of the Drum Cartridge is scratched or touched the print quality will be compromised.
Samsung Electronics
Service Manual
Precautions
1-4
1.2.5 Disregarding this warning may cause bodily injury
(1) Be careful with the high temperature part.
The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser to cool down before disassembly.
(2) Do not put finger or hair into the rotating parts.
When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor, fan, etc.). If do, you can get harm.
(3) When you move the printer
- When transporting/installing the equipment, employ four persons and be sure to hold the positions as shown
in the figure. The equipment is quite heavy and weighs approximately 45 Kg (including consumables), therefore pay full attention when handling it.
- Be sure not to hold the movable parts or units (e.g. the control panel, DADF) when transporting the
equipment.
- Be sure to use a dedicated outlet with 1 10V/220Vpower input.
- The equipment must be grounded for safety.
- Select a suitable place for installation. Avoid excessive heat, high humidity, dust, vibration and direct sunlight.
- Provide proper ventilation since the equipment emits a slight amount of ozone.
- To insure adequate working space for the copying operation, keep a minimum clearance of 80cm (32”) on the
left, 80 cm (32”) on the right and 10 cm (4”) on the rear .
- The equipment shall be installed near the socket outlet and shall be accessible.
- Be sure to fix and plug in the power cable securely after the installation so that no one trips over it.
Precautions
Samsung Electronics
Service Manual
1-5
1.3 ESD Precautions
Certain semiconductor devices can be easily damaged by static electricity. Such components are commonly called “Electrostatically Sensitive (ES) Devices”, or ESDs. Examples of typical ESDs are: integrated circuits, some field effect transistors, and semiconductor “chip” components.
The techniques outlined below should be followed to help reduce the incidence of component damage caused by static electricity.
Caution >>Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
1. Immediately before handling a semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, employ a commercially avail­able wrist strap device, which should be removed for your personal safety reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ESDs, place the assembly on a conductive surface, such as aluminum or copper foil, or conductive foam, to prevent electrostatic charge buildup in the vicinity of the assem­bly .
3. Use only a grounded tip soldering iron to solder or desolder ESDs.
4. Use only an “anti-static” solder removal device. Some solder removal devices not classified as “anti-static” can generate electrical charges sufficient to damage ESDs.
5. Do not use Freon-propelled chemicals. When sprayed, these can generate electrical charges sufficient to dam­age ESDs.
6. Do not remove a replacement ESD from its protective packaging until immediately before installing it. Most replacement ESDs are packaged with all leads shorted together by conductive foam, aluminum foil, or a compa­rable conductive material.
7. Immediately before removing the protective shorting material from the leads of a replacement ESD, touch the pro­tective material to the chassis or circuit assembly into which the device will be installed.
8. Maintain continuous electrical contact between the ESD and the assembly into which it will be installed, until com­pletely plugged or soldered into the circuit.
9. Minimize bodily motions when handling unpackaged replacement ESDs. Normal motions, such as the brushing together of clothing fabric and lifting one’s foot from a carpeted floor, can generate static electricity sufficient to damage an ESD.
1. Exercise caution when replacing a super capacitor or Lithium battery. There could be a danger of explosion and subsequent operator injury and/or equipment damage if incorrectly installed.
2. Be sure to replace the battery with the same or equivalent type recommended by the manufacturer.
3. Super capacitor or Lithium batteries contain toxic substances and should not be opened, crushed, or burned for disposal.
4. Dispose of used batteries according to the manufacture’s instructions.
1.4 Super Capacitor or Lithium Battery Precautions
Product Specifications
Samsung Electronics
Service Manual
2-1
2
2
2. Product Specifications
2.1 Product Overview
1) Major Feature
- SCX-6345N : 45PPM All-in-1 (exclude from Analog Fax)
- Productive 43 cpm output speeds in A4
- 600 x 600 dpi output
- 50-sheet DADF
- Versatile paper supply of up to 2,300 sheets
- 25% - 400% zoom
- Finishing capabilities, including stapling and offset stacking
- Wide Touch Screen (640x240) (Simple Intuitive Graphic Touch Screen User Interface)
- Easy to use digital copier with finishing
- Improved Productivity through Super G3 and LAN Faxing with advanced copying capabilities
- Networked digital copier/printer/scanner with its duplex printing and finishing capabilities, plus network scan technology
2) Sales Target
- 20 ~ 100 Persons Workgroup (Corp., SMB)
- Competitive TCO
Samsung Electronics
Service Manual
Product Specifications
2-2
3) Concept
- Lower than Half Price of A3 Mono MFP
- High Performance Network-Ready Print
- N/W Scan Operation Scan Solution Scan to Client / FTP / SMB Scan to Email SmarThru Workflow
- Job Accounting Job Records Information (Print/Copy/Scan/Fax) User based History tracking SNMP Job Accounting Access from SWAS Print/Copy/Scan/Fax log tracking (HDD, Server)
- Security Authentication (LDAP, Kerberos) Secure Printing IP Address Filtering Time / Date / ID Stamp
- Enhanced UI / Color Touch Screen LCD Enhanced Paper Handling High Capacity Feeder Multi-bin Stacker Multi-position Stapler
- Document Server Scan / Copy / FAX to HDD File Management Paperless N/W Fax Internet FAX Fax Forward to Email / Folder IP FAX
Product Specifications
Samsung Electronics
Service Manual
2-3
2.2 Prouduct Specification
Samsung Electronics
Service Manual
Product Specifications
2-4
Product Specifications
Samsung Electronics
Service Manual
2-5
ITEM DESCRIPTION
DADF Up to 50 sheets DADF document size Width:174 to 218 mm
Length: 128 to 356 mm for single page scan
128 to 356 mm for multi pages scan
Paper input capacity Tray 1: 520 multi-pages for plain paper
30 pages for transparencies, labels, card stock, and envelopes Multi-purpose tray: 100 multi-pages for plain paper,
10 pages for transparencies, labels, card stock, and envelopes optional tray 2/3/4: 520 multi-pages for plain paper,
30 pages for transparencies, labels, and card stock
Paper output capacity 500 sheet (face down)
500 sheet (optional stacker) Consumables 2-piece toner/drum cartridge system Power rating 110 - 127 VAC, 50/60 Hz, 9 A
220 - 240 VAC, 50/60 Hz, 4.5 A
Power consumption Average operation mode: Less than 900 W
Power save mode: Less than 35 W Stand by mode: Less than 170 W
Noise level
a
Standby mode: Less than 43 dBA Printing mode: Less than 60 dBA
Copying mode: Less than 62 dBA Warm-up time Less than 35 seconds (from sleep mode) Operating environment Temperature: 10 to 32
2.3 General specifications
a. Sound Pressure Level, ISO 7779 b. The number of pages may be affected by operating environment, printing interval, media type, media size and option.
* Note: This machine comes with 128 MB of on-board memory and a 128 MB DIMM.
To expand the memory of your machine, you must remove the existing DIMM and purchase a larger one.
Humidity: 20% to 80% RH Display 1/2 VGA (640 x 240) Toner cartridge life Drum cartridge life
b
b
20,000 pages at ISO 19752 Std.
60,000 pages *Memory 256 MB (max. 384 MB) External dimension (W x D x H) 637.4 x 489 x 616mm (without tray 2/3/4), 25 x 19.25x 24.25 inches Weight 44.5 Kg (including consumables) Package weight Paper: 5.4 Kg, Plastic: 1.2 Kg
Samsung Electronics
Service Manual
Product Specifications
2-6
ITEM DESCRIPTION
Printing method 2 Beam Laser Scanning Unit and Electro Photo graphy Printing speed
a
Up to 43 ppm in A4 (45 ppm in Letter) Duplex printing speed Up to 40 ipm in A4 (42 ipm in Letter) First print out time 8 seconds (from ready) Print resolution Up to 600 x 600 dpi (1200 dpi class) Printer language PCL 6, PS 3 OS Support PCL/PS Windows 98/Me/NT4.0/2000/XP(32/64bit)/2003 Server(32/64bit),
Various Linux OS including Red Hat 8~9, Fedora Core 1~4, Mandrake 9.2~10.1 and SuSE 8.2~9.2
Mac OS 10.3~10.4 WHQL Windows 2000/XP/2003 Server Network Windows 98/ME/NT4.0/2000/XP(32/64bits)/2003(32/64bits)
NetWare 4.x, 5.x, 6.x
Mac OS 8.6~9.2/10.1~10.4
Various Linux OS including Red Hat 8~9, Fedora Core 1~4, Mandrake
9.2~10.1, and SuSE 8.2~9.2
Unix HP-UX, Solaris, SunOS, SCO UNIX UNIX Filter N/A
Printing Support for AS/400 Yes Direct Printing PDF 1.4 Interface High Speed USB 2.0
Ethernet 10/100 Base TX
2.4 Printer specifications
a. Print speed will be affected by operating system used, computing performance, application software, connecting
method, media type, media size, and job complexity.
b. Please visit www.samsungprinter.com to download the latest software version.
ITEM DESCRIPTION
Copy speed
a
Up to 43 ppm in A4 (45 cpm in Letter)
Duplex Copy speed Simplex to Duplex(1-2): Approx. 40 ipm b in A4 (42 ipm in Letter)
Duplex to Duplex(2-2): 14 ipm in A4 (17 ipm in Letter)
Copy resolution Scan: up to 600 x 300 (text, text/photo)
up to 600 x 600 (photo using platen) up to 600 x 300 (photo using DADF)
Print: up to 600 x 600 (text, text/photo, photo) Zoom rate 25% ~ 400% (Platen), 25% ~ 200% (ADF) Multiple copies 1 to 999 pages
2.5 Copier specifications
a. Copy Speed is based on Single Document Multiple Copy. b. images per minute
Product Specifications
Samsung Electronics
Service Manual
2-7
ITEM DESCRIPTION
Compatibility TWAIN standard / WIA standard Scanning method DADF and Flat-bed Color CCD (Charge Coupled Device) module Resolution Optical: 600 x 600 dpi (mono and color)
Enhanced: 4,800 x 4,800 dpi
Effective scanning length Scanner glass: 348 mm
DADF: 348 mm Effective scanning width Max 208 mm Color bit depth Internal: 36 bit
External: 24 bit Mono bit depth 1 bit Linearity & Halftone
8 bits (External), 12 bits (Internal) for Gray Scale Grayscale 256 levels
2.6 Scanner specifications
ITEM DESCRIPTION
Compatibility ITU-T Group 3 Applicable line Public Switched Telephone Network (PSTN) or behind PABX Data coding MH/MR/MMR/JBIG/JPEG (Tx only) Modem speed 33.6 Kbps Transmission speed Approx. 3 seconds/page
a
Maximum document length Scanner glass: 356 mm
Duplex automatic document glass: 356 mm Resolution Standard: 203 x 98 dpi
Fine: 203 x 196 dpi
Super Fine: 300 x 300 dpi, 406 x 392 dpi, 203 x 392 dpi (Rx only) Memory 1 16 MB Halftone 256 levels Auto dialer up to 200 numbers (all numbers / Max group avail)
2.7 Facsimile specifications (optional)
a. Transmission time applies to memory transmission of text data with ECM compression using only ITU-T No.1 Chart.
Samsung Electronics
Service Manual
Product Specifications
2-8
ITEM DESCRIPTION
HW, S/W Requirements Need Scan Enable Kit Authentication ID/Password Login LDAP/Kerberos/SMB/Local Authentication Protocol SMTP, MIME(Base 64) Max. Capacity Message size 1/2/3/4/5/10MB of Message Local Address Book Up to 200 Max. Scan Area Up to Legal size in Platen, DADF Basic Sending Mode Address Entry Manual EntryLocal Address Book (Up to 200 Users)LDAP
Duplex - 1-Sided
- 2-Sided
- 2-Sided & Rotate Side2
Resolution Color: 100, 200, 300
Mono: 100, 200, 300, 400, 600 Gray: 100, 200, 300, 400, 600
Image control Mode Original Size Auto, Custom, Mixed Size
Original type Text, Text/Photo, Photo, Color Darkness 5 Levels Sharpness No Erase Background Yes (On/Off) Erase Edge Yes
Output Control Quality/File Size Normal Quality
File Formats BMP, TIFF-S, TIFF-M, JPEG, PDF
2.8 Scan to Email (optional)
ITEM DESCRIPTION
HW, S/W Requirements SCX-KIT10S Authentication ID/Password Login LDAP/Kerberos/SMB/Local Authentication Protocol SMB, FTP Template settings Server Address IPv4 Address or DNS name
Port Number 0 ~ 65535
Basic Entry Color Yes
Resolution Color: 100, 200, 300
Mono: 100, 200, 300, 400, 600 Gray: 100, 200, 300, 400, 600
Original Size Auto, Manual, Mixed Size
Image control Original type Text, Text/Photo, Photo
Darkness 5 Levels Erase Background Yes (On/Off) Erase Background Yes (On/Off)
Output Control Quality/File Size Normal Quality
File Formats TIFF-S, TIFF-M, JPEG, PDF
2.9 NW Scan (Scan to SMB/FTP/HTTP(S))
Product Specifications
Samsung Electronics
Service Manual
2-9
ITEM DESCRIPTION
HW, S/W Requirements SCX-KIT11S OS Server Windows 2000/XP/2003 Server
Cient OS including Windows that supports IE5.5 or higher
Server No. of user Up to 1,000 user (up to 100 Workforms per user)
No. of device Up to 100 device (up to 10 devices at the same time) Address Entry Server:
Device: Server Address book + each Device's Phonebook, Email Address book
Local(HD) + Local(SmarThru Workflow) + Global(LDAP) Address book UI
Scan To Folder(SMB) Yes (Via SmarThru Server)
Email Yes (Via SmarThru Server) OCR Yes (Via SmarThru Server) FTP Yes (Via SmarThru Server) Fax Tx to Fax Server (Via SmarThru Server) HTTP/S No Print Color scan(Mono Print) to Color Print (Via SmarThru Server)
Fax to Folder Yes (Via SmarThru Server)
Email Yes (Via SmarThru Server) OCR N/A (Fax Resolution is too low) FTP Yes (Via SmarThru Server) Fax similar with Server Fax solution (Via SmarThru Server) Print Yes (Via SmarThru Server) HTTP/S No
Security SSL/TLS SSLV3.0, TLS V1.0
Authentication LDAP, Kerberos v5.0 IPv6 NO
2.10 SmarThru Workflow
Samsung Electronics
Service Manual
Product Specifications
2-10
ITEM DESCRIPTION
Input Capacity Main Tray Up to 520sheets @ 75g/
MP Tray 100sheets @ 75g/ Optional Cassette 520 sheets @ 75g/ Max. three additional cassettes could be
(SCX-S6345A) attached (SEE Tray2 Option for more information)
Sensing(Cassette) H/W Install Sensor: Yes
Paper Empty Sensor: Yes Paper Size Detect: Partially YES (A4,Ltr.,Legal,Folio,Oficio, Executive) Paper Type Detect: No
Output Capacity Face Down 500 sheets @ 75g/
Face Up N/A Sensing Paper Full Sensor: Yes
Tray 1/2/3/4 Media Size Letter, Legal, Oficio, Folio, A4, JIS B5, ISO B5, Executive, A5,
Statement, A6, PostCard 4x6, Envelope B5, Envelope Monarch, Envelope COM-10, Envelope DL, Envelope C5, Envelope C6, Custom
Media Size Control Guide Min: 98.0 mm x 148 mm (3.86"x5.83")
Max: 215.9 mm x 355.6 mm (8.5"x14.0")
Media type Plain Paper, Thin Paper, Bond, Punched, Pre-Printed,
Recycled, Envelope, Transparency, Label, CardStock, Letterhead,Thick,Cotton,Colored,Archive
Mdeia Weight Plain Paper: 60~90g/ (16~24 lb)
(Duplex : 20~24lb) Thin Paper: 60g/ (16 lb) Bond: 105~120g/ (28~32 lb) Punched: 60~90g/ (16~24 lb) Pre-Printed : 60~90g/ (16~24 lb) Recycled : 90~108g/ (20~24 lb) Envelope : 75~90g/ Transparency : 138~146
MP Tray Media Size Letter, Legal, Oficio, Folio, A4, JIS B5, ISO B5, Executive, A5,
Statement, A6, PostCard 4x6, Envelope B5, Envelope Monarch, Envelope COM-10, Envelope DL, Envelope C5, Envelope C6, Custom
Media Size Control Guide Min: 98.0 mm x 148 mm (3.86"x5.83")
Max: 215.9 mm x 355.6 mm (8.5"x14.0")
Media type Plain Paper, Thin Paper, Bond, Punched, Pre-Printed,
Recycled, Envelope, Transparency, Label, CardStock, Letterhead,Thick,Cotton,Colored,Archive
Mdeia Weight 16~43 lb. Paper empty sensor Yes Paper size detection No
2.1 1 Paper Handling
Product Specifications
Samsung Electronics
Service Manual
2-11
ITEM DESCRIPTION
DADF Model Code Standard
Document Weight 50~120 g/sm(12.5~28lb = 0.07mm~0.13mm) Capacity 50 sheets @ 75g/ Document Size Width: 174 ~ 218mm (6.9"~8.5")
Length : 128 ~ 356mm (5" ~ 14.0") for Single page scan
128 ~ 400mm (5" ~ 15.7") for Multi pages scan Document Type MN standard except transparencies Original size detection Letter or A4, Legal, and Small Size
Others High Capacity Feeder N/A
Envelope N/A Finisher SEE "Finisher" Stapler SEE Stapler spec in "Finisher"
Samsung Electronics
Service Manual
Product Specifications
2-12
2.12 Model Comparison
USB 2.0, N/W
Graphic / Touch-Screen
640 x 240
2300
Legal
Legal
up to 600 dpi
MMR/MR/MH, JBIG, JPEG
up to 600 dpi
up to 33.6 Kbps
Addr. 1200 dpi
600 x 600 dpi
< 6 second
40 GB
256 MB (max. 384MB)
500 MHz
45 ppm
SCX-6345N
-FCOT
NHDD
32 MB Memory
120 MHzProcessor
H/W
up to 600 dpiResolution
up to 33.6 KbpsSpeed
1050Max. Paper SupplyPaper Handling
LegalPlaten
Max. Docu. Size
LegalDADF
600 x 600 dpiCopy
Resolution
FastRes 1200 dpiPrint
IEEE1284(ECP),
USB(without HUB mode)
with Backlight
20 characters X 2 lines
up to 600 dpi
MH/MR/MMR/JB IG/JPEG (Color/Transmission)
22 ppm
HP 4345
ResolutionScan
Compression
Fax
Max. Speed @ Letter
LCD
User Interface
Interface
Type
ITEM
-
SCX-6345N SCX-6320FITEM
Product Specifications
Samsung Electronics
Service Manual
2-13
2.13 PM(Preventive Maintenance) List
PM Parts
Description Part No. Life Qty Remark
Pickup Roller JC97-02259A 200,000 3 -
Fuser Unit JC96-03724A 200,000 1 -
Transfer Roller JC97-02287A 100,000 1 -
DADF Rubber PAD JC97-01846A 50,000 1 for DADF
DADF Feed Roller JC97-02277A 200,000 1 for DADF
Bypass Rubber PAD JC97-02260A 50,000 1 for MP Tray
Bypass Feed Roller JC96-03533A 200,000 1 for MP Tray
Maintenance Kit
Top Code Parts Part No. Quantity Lifetime
Pick-Up Roller JC97-02259A 3 200,000
Fuser Unit JC96-03724A 1 200,000
Quick Install Guide New 1 -
Box,Cushion,Label
Master Box (4box/1master box)
New 1 -
Transfer Roller JC97-02287A 5 100,000
Quick Install Guide New 1 -
Box,Cushion,Label
Master Box (4box/1master box)
New 1 -
Maintenance
Kit2
SCX-V6345B/SEE
Maintenance
Kit1
SCX-V6345A/SEE
System Overview
Samsung Electronics
Service Manual
3-1
3
3
3. System Overview
The SCX-6345 Series is a networked Multi-Function Peripheral (MFP) integrating a plain fax, a B/W laser printer, a color flatbed scanner, and a B/W copier, and a Scan-To-Email sender (5-in-1 with DADF). The Jungfrau series can be expanded to support non-scan and FAX functions such as Copy ?only or Copy and printer functions(2-in-1 with DADF ). Jungfrau is developed for workgroup office customers. The main product concept is High Speed and High Quality . This model has 45 ppm letter print-speed, 3 sec transmission-speed for fax, 33.6kbps fax-transfer rate, optical 600 dpi color scanner, and 1200 dpi printer.
Samsung Electronics
Service Manual
System Overview
3-2
3.1 System Lay-out
System Overview
Samsung Electronics
Service Manual
3-3
3.2 System Description
3.2.1 System controller architecture
Largely, SCX-6345N consists of Main Control Part, Operation Panel Part, Scanner Part, Line Interface Part, Power Part and Network Interface Card, Optional DIMM(Dual-In-Memory Module) for Scan-To-Email.
Main Controller is commonly applied in all products, Jungfrau Series, and in case of necessary a part of components or Module is selectively adopted in accordance with required feature of each model.
Each Part is designed with emphasis on Common-Use/Standardization with other models as independent module.
System Block Diagram
(note) This System Block diagram only for reference (will be updated with next version)
RESET /
PowerFail Det .
RESET /
PowerFail Det .
Engine I/F
Engine I/F
Network
Network
HDD
(40GB)
HDD
(40GB)
System RAM
SDRAM 64MB
(K4S561632C)
System RAM
SDRAM 64MB
(K4S561632C)
FAX Data RAM
SDRAM 32MB
(K4S281632E)
FAX Data RAM
SDRAM 32MB
(K4S281632E)
PS3
FLASH 4MB
(Am29LV160DB)
PS3
FLASH 4MB
(Am29LV160DB)
System SRAM
(K6R1016V1D)
System SRAM
(K6R1016V1D)
FAX
(FM336)
FAX
(FM336)
PCI BUS
SDRAM
BUS
ROM I/O BUS
SRAM
K6R1016V1D
SRAM
K6R1016V1D
Motor/Sensor
Controller
Motor/Sensor
Controller
Color/Mono CCD
(TDC2561D)
5340pixels 16MHz
3-channel
Color/Mono CCD
(TDC2561D)
5340pixels 16MHz
3-channel
AFE(AD9825)
16-bit 15MSPS
3-channel
AFE(AD9825)
16-bit 15MSPS
3-channel
USB /
IEEE 1284
USB /
IEEE 1284
MEMORY
BUS
SCAN MODULE
GRAPHIC LCD
(KEY & TOUCH)
GRAPHIC LCD
(KEY & TOUCH)
USER INTERFACE, DADF, SCF, HCF
DIGITAL PRINTER -COPIER 35/45 CPM
(ARM10)
Signal level
transformer
Signal level
transformer
SPGPv3 350MHz
SPGPv3
350MHz
CIP4
40MSPS
CIP4
40MSPS
STEP MOTOR
& CLUTCH
STEP MOTOR
& CLUTCH
STEP MOTOR
& CLUTCH
STEP MOTOR
& CLUTCH
Serial I/F
(UART)
Serial I/F
(UART)
OPE
OPE
DADF
S3F443FX
SLA7066
DADF
S3F443FX
SLA7066
SCF / HCF
S3F443FX
A3977, A3953
SCF / HCF
S3F443FX
A3977, A3953
Samsung Electronics
Service Manual
System Overview
3-4
3.2.2 Main Controller
The Main Control Part comprises 1 CPU and 1 B D by adopting the dedicated Controller for Fax & LBP. The Scanner Part comprises ADF& CCD and connected with Main through Harness.
Loading...
+ 293 hidden pages