Samsung SCX-5835 series, SCX-5935 series User Manual

SCX-5835_5935 Series

Multi Functional Printer

User’s Guide

imagine the possibilities

Thank you for purchasing a Samsung product.

Copyright_ 1

copyright

© 2008 Samsung Electronics Co., Ltd. All rights reserved.
This user’s guide is provided for information purposes only. All information included herein is subject to change without notice.
Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.

• Samsung and Samsung logo are trademarks of Electronics Co., Ltd.

• PCL and PCL 6 are trademarks of Hewlett-Packard Company.

• Microsoft, Windows, Windows Vista, Windows 7 and Windows 2008 Server R2 are either registered trademarks or trademarks of Microsoft Corporation.

• PostScript 3 is a trademark of Adobe System, Inc.

• UFST ® and MicroType ™ are registered trademarks of Monotype Imaging Inc.

• TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.

• All other brand or product names are trademarks of their respective companies or organizations.

• Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.

REV.4.01

Safety information_ 11

safety information

These warnings and precautions are included in order to prevent injury to you and others, as well as preventing any
potential damage to your machine. Be sure to read and understand all of these instructions before using the machine.

Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and
instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place
for future reference.

IMPORTANT SAFETY SYMBOLS

This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according to the degree of
danger.

Explanation of all icons and signs used in the user’s guide:

OPERATING ENVIRONMENT

Warning

Warning Hazards or unsafe practices that may result in severe personal injury or death.

Caution Hazards or unsa

fe practices that may result in minor personal injury or property damage.

Do not attempt.

Do not disassemble.

Do not touch.

Unplug the power cord from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Follow directions explicitly.

Do not use if

the power cord is damaged or if the

electrical outlet is not grounded.
► This could result in electric shock or fire.

Do not bend, or place heavy objects on the power
cord.

► Stepping on or allowing the power cord to be
crushed by a heavy object could result in electric
shock or fire.

Do not place anything on top of the machine (water,
small metal or heavy objects, candles, lit cigarrettes,
etc.).

► This could result in electric shock or fire.

Do not remove the plug by pulling on the cord; do not
handle the plug with wet hands.

► This could result in electric shock or fire.

Safety information_ 12

Caution

OPERATING METHOD

Caution

If the machine gets overheated, it releases smoke,
makes strange noises, or generates an odd odor,
immediately turn off the power switch and unplug the
machine.

► This could result in electric shock or fire.

During an electrical storm or for a period of
non-operation,remove the power plug from the
electrical outlet.

► This could result in electric shock or fire.

If the plug does not easily enter the electrical outlet, do not
attempt to force it in.

► Call an electrician to change the electrical outlet, or this
could result in electric shock.

Be careful, the paper output area is hot.
► Burns could occur.

Do not allow pets to chew on the AC power, telephone or PC
interface cords.

► This could result in electric shock or fire.

If the machine has been dropped, or if the cabinet appears
damaged, unplug the machine from all interface connections
and request assistance from qualified service personnel.

► Otherwise, this could result in electric shock or fire..

If the machine does not operate properly after these
instructions have been followed, unplug the machine from all
interface connections and request assistance from qualified

service personnel.

► Otherwise, this could result in electric shock or fire.

If the machine exhibits a sudden and distinct change in
performance, unplug the machine from all interface
connections and request assistance from qualified service

personnel.

► Otherwise, this could result in electric shock or fire.

Do not forcefully pull the paper out during printing.
► It can cause damage to the machine.

When printing large quantities, the bottom part of the
paper output area may get hot. Do not allow children
to touch.

► You (children) may be burned.

Be careful not to put your hand between the machine
and paper tray.

► You may get injured.

When removing jammed paper, do not use tweezers
or sharp metal objects.

► It can cause damage to the machine.

Do not block or push objects into the ventilation opening.
► This could result in elevated component temperatures which

can cause damage or fire.

Do not allow too many papers to stack up in the paper output
tray.

► It could cause damage to the machine.

Use care to avoid paper cuts when replacing paper or removing
jammed paper.

► You may get hurt.

This machine's power interception device is the power cord.
► To switch off the power supply, remove the power cord from

the electrical outlet.

Safety information_ 13

INSTALLATION / MOVING

Warning

Caution

MAINTENANCE / CHECKING

Caution

Do not place the machine in an area with dust,
humidity or water leaks.

► This could result in electric shock or fire.

When moving the machine, turn the power off and
disconnect all cords; then lift the machine with at
least two people.

► The machine could fall, causing human injury or
machine damage.

Do not put a cover over the machine or place it in an airtight
location, such as a closet.

► If the machine is not well-ventilated, this could result in fire.

Do not place the machine on an unstable surface.
► The machine could fall, causing human injury or machine

damage.

Make sure you plug the power cord into a grounded electrical
outlet.

► Otherwise, this could result in electric shock or fire.

The machine should be connected to
the power level which is specified on the label.

► If you are unsure and want to check the power level you are
using, contact the electrical utility company.

Do not overload wall outlets and extension cords.
► This can diminish performance, and could result in electric

shock or fire.

Use only No.26 AWG

a

or larger, telephone line cord, if

necessary.
► Otherwise, it can cause damage to the machine.

a. AWG: American Wire Gauge

Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters
(79”) with a 140V machine, then the gauge should be 16 AWG

or larger.

► Otherwise, it can cause damage to the machine, and could
result in electric shock or fire.

Unplug this product from the wall outlet before
cleaning the inside of the machine. Do not clean the
machine with benzene, paint thinner or achol; do not
spray water directly into the machine.

► This could result in electric shock or fire.

Keep cleaning supplies away from children.
► Children (you) may get hurt.

When you are working inside the machine replacing
supplies or cleaning the inside, do not operate the
machine.

► You may get injured.

Do not disassemble, repair or rebuild the machine by
yourself.

► It can cause damage to the machine. Call a
certified technician when the machine needs repair.

Safety information_ 14

SUPPLY USAGE

Caution

Keep the power cable and the contact surface of the plug clean
from dust or water.

► This could result in electric shock or fire.

To clean and operate the machine, strictly follow the user's
guide provided with the machine.

► Otherwise, it can cause damage to the machine.

Do not remove any covers or guards that are fastened with
screws.

► The machine should only be repaired by Samsung service
technician.

Do not disassemble the toner cartridge.
► Toner dust can be dangerous to humans.

When storing supplies such as toner cartridges, keep
them away from children.

► Toner dust can be dangerous to humans.

Do not burn any of the supplies such as toner
cartridge or fuser unit.

► It can cause an explosion or fire.

Using recycled supplies, such as toner, can cause damage to
the machine.

► In case of damage due to the use of recycled supplies, a
service fee will be charged.

When changing the toner cartridge or removing jammed paper,
be careful not to let toner dust touch your body or clothes.

► Toner dust can be dangerous to humans.

Regulatory information_ 15

regulatory information

This machine is designed for our sound environment and certified with several regulatory statements.

LASER SAFETY STATEMENT

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and
elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.

Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to
laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.

WARNING

Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible,
can damage your eyes.

When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to persons:

TAIWAN ONLY

OZONE SAFETY

During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, request your nearest Samsung dealer.

Regulatory information_ 16

MERCURY SAFETY

PERCHLORATE WARNING

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in
California USA.

Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate. (U.S.A. only)

POWER SAVER

RECYCLING

CHINA ONLY

Contains Mercury, Dispose According to Local, State or Federal Laws.(U.S.A. only)

This printer contains advanced energy conservation technology tha

t reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of time, power consumption is automatically lowered.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
For more information on the ENERGY STAR program see http://www.energystar.gov

Recycle or dispose of the packaging material for this product in an environm

entally responsible manner.

Regulatory information_ 17

CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)

(Applicable in the European Union and other European countries with separate collection systems)

CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT

(Applicable in the European Union and other European countries with separate battery return systems.)

RADIO FREQUENCY EMISSIONS

FCC Information to the User

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or experienced radio TV technician for help.

Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.

Canadian Radio Interference Regulations

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe A prescrites dans la
norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada.

RFID (RADIO FREQUENCY INTERFACE DEVICE)

RFID operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device. (U.S.A., France, Taiwan only)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.

This marking on the battery, manual or packaging indicates that the batteries in this prod

uct should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to
human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your
local, free battery return system.

Regulatory information_ 18

TAIWAN ONLY

RUSSIA ONLY

AE95AE95

FAX BRANDING

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any
message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or
on the first page of the transmission the following information:

1. the date and time of transmission

2. iden

tification of either business, business entity or individual sending the message; and

3. tel

ephone number of either the sending machine, business, business entity or individual.

The Telephone Company may make changes in its communications facilitie

s, equipment operations or procedures where such action is
reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68. If such changes can
be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require
modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given
adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service

Regulatory information_ 19

RINGER EQUIVALENCE NUMBER

The Ringer Equivalence Number and FCC Registration Number for this machine may be found on the label located on the bottom or rear of the
machine. In some instances you may need to provide these numbers to the telephone company.

The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone line, and is useful for determining whether
you have “overloaded” the line. Installing several types of equipment on the same telephone line may result in problems making and receiving
telephone calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the equipment on your telephone
line should be less than five in order to assure proper service from the telephone company. In some cases, a sum of five may not be usable on
your line. If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may
cause harm to the telephone network.

FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s
authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company
should notify the customer that service may be stopped. However, where prior notice is impractical, the company may temporarily cease
service, providing that they:

a) promptly notify the customer.
b) give the customer an opportunity to correct the equipment problem.
c) inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to procedures set out in

FCC Rules and Regulations Subpart E of Part 68.

You should also know that:

• Your machine is not designed to be connected to a digital PBX system.

• If you intend to use a computer modem or fax modem on the same phone line as your machine, you may experience transmission and

reception problems with all the equipment. It is recommended that no other equipment, except for a regular telephone, share the line with
your machine.

• If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for both the power

and the telephone lines. Surge protectors can be purchased from your dealer or telephone and electronic specialty stores.

• When programming emergency numbers and/or making test calls to emergency numbers, use a non-emergency number to advise the

emergency service dispatcher of your intentions. The dispatcher will give you further instructions on how to actually test the emergency
number.

• This machine may not be used on coin service or party lines.

• This machine provides magnetic coupling to hearing aids.

You may safely connect this equipment to the telephone network by means of a standard modular jack, USOC RJ-11C.

REPLACING THE FITTED PLUG (FOR UK ONLY)

Important

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the
fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until
you have another fuse cover.

Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal

13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug.

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric shock if you plug it into a socket.

Regulatory information_ 20

Important warning:

• Green and Yellow : Earth

• Blue : Neutral

• Brown : Live

If the wires in the mains lead do not match the colors marked in your plug, do the following:
You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or

green.
You must connect the blue wire to the pin which is marked with the letter “N” or colored black.
You must connect the brown wire to the pin which is marked with the letter “L” or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the distribution board.

DECLARATION OF CONFORMITY (EUROPEAN COUNTRIES)

Approvals and Certifications

January 1, 1995 : Council Directive 2006/95/EC Approximation of the laws of the member states related to low voltage equipment.
January 1, 1996 : Council Directive 2004/108/EC (92/31/EEC), ap

proximation of the laws of the Member States related to electromagnetic

compatibility.
March 9, 1999 : Council Directive 1999/5/EC on radio equipment

and telecommunications terminal equipment and the mutual recognition of
their conformity. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics
Co., Ltd. representative.

EC Certification

Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX)
This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched

telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the European countries:

In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance.
The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the

European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional
requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the
relevant advisory notes contained in this document.

You must earth this machine.
T

he wires in the mains lead have the following color code:

The CE marking applied to this product symbolizes Samsung Electronics

Co., Ltd. Declaration of Conformity with the following applicable
93/68/EEC Directives of the European Union as of the dates indicated:
The declaration of conformity may be consulted at www.samsung.com/printer, go to Support > Download center and enter your printer name to
browse the EuDoC.

Regulatory information_ 21

OPENSSL LICENSE

Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes

software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without

prior written permission. For written permission, please contact [e-mail].

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written

permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the

OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young([e-mail]). This product includes software written by Tim Hudson
([e-mail]).

ORIGINAL SSLEAY LICENSE

Copyright (C) 1995-1998 Eric Young ([e-mail]) All rights reserved.
This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with

Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to

all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this
distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]). Copyright remains Eric Young's,
and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation
(online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes

cryptographic software written by Eric Young ([e-mail])" The word 'cryptographic' can be left out if the rouines from the library
being used are not cryptographic related:-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an

acknowledgement: "This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply
be copied and put under another distribution licence [including the GNU Public Licence.

Regulatory information_ 22

CHINA ONLY

About this user’s guide_ 23

about this user’s guide

This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each
step during actual usage. Valuable for both novice and professional users can refer to this as a guide for installing and
using the machine.

• Read the safety information before using the machine.

• If you have a problem using the machine, refe

r to the troubleshooting chapter. (See "Troubleshooting" on page 1.)

• Terms used in this user’s guide are e

xplained in the glossary chapter. (See "Glossary" on page 151.)

• Use Index to find information.

• All illustrations in this user’s guide may differ fro

m your machine depending on its options or models.

• The procedures in this user’s guide are mainly based on Windows XP.

CONVENTION

Some terms in this guide are used interchangeably, as below:

• Documen

t is synonymous with original.

• Paper is synonymous with media, or print media.

• Machine refers to printer or MFP.

The following table offers the conventions of this guide:

The date format may differ from country
to country.

Do not touch the green underside of the
toner cartridge.

CONVENTION DESCRIPTION EXAMPLE

Bold For texts on the display or button names on the machine. Start
Note Provides additional information or detailed specification of the machine function

and feature.

Caution Gives users information to protect the machine from possible mechanical

damage or malfunction.

Footnote Provides additional more detailed information on certain words or a phrase. a. pages per minute
(“Cross-reference”) Guides users to a reference page for the additional detailed information. (See "Finding more information" on

page 24.)

About this user’s guide_ 24

FINDING MORE INFORMATION

You can find information for setting up and using your machine from the following resources, either as a print-out or on screen.

MATERIAL NAME DESCRIPTION

Quick Install Guide This guide provides information on setting up your machine and this requires that you follow the instructions in the guide to prepare the

machine.

Online User’s Guide This guide provides you with step-by-step instructions for using your machin

e’s full features, and contains information for maintaining

your machine, troubleshooting, and installing accessories.

Network Website You can set the network environment from your computer using network-managing programs, such as SetIP, SyncThru™ Web Admin

Service, etc.This Website will be convenient for network administrators who need to manage many machines simultaneously. You can
download the SyncThru™ Web Admin Service on http://solution.samsungprinter.com. SetIP program is provided in the software CD.

Driver Help This help provides you with help information

on printer driver and instructions for setting up the options for printing. (See "Samsung tab"

on page 8.)

Samsung website If you have Internet access, you can get help, support, machine drivers, manuals, and order information from the Samsung website,

www.samsungprinter.com.

Features of your new product_ 25

features of your new product

Your new machine is equipped with a number of special features that improve the quality of the documents you print.

SPECIAL FEATURES

Print with excellent quality and speed

Handle many different types of printable material

Create professional documents

Save time and money

Expand your machine’s capacity

* Zoran IPS Emulation compatible with PostScript 3

136 PS3 fonts

• You can print with a resolution of up to 1200 dpi effective

output.

• Your machine prints A4-sized paper at up to 33 ppm and

letter-sized paper at up to 35 ppm.

• For duplex printing, your machine prints A4-sized paper at

up to 17 ipm and letter-sized paper at up to 18 ipm.

• Th

e multi-purpose tray supports envelopes, labels,
custom-sized media, postcards, and heavy paper. The
multi-purpose tray holds up to 100 sheets of plain paper.

• The 500-sheet tray 1 and 500-sheet optional tray support

plain paper in various sizes.

• Print

Watermarks. You can customize your documents with
words, such as “Confidential”. (See "Using watermarks" on
page 4.)

• Print Posters. The text and pictures of each page of your

document are magnified and printed across the sheet of
paper and can then be taped together to form a poster. (See
"Printing posters" on page 2.)

• You can use preprinted forms and letterhead with plain

paper. (See"Using overlay" on page 4.)

• To

save paper, you can print multiple pages on one single
sheet of paper. (See "Printing multiple pages on one sheet of
paper" on page 2.)

• This machine automatically conserves electricity by

substantially reducing power consumption when not in use.

• To save paper, you can print on both sides of the paper

(double-sided printing). (See "Printing on both sides of
paper" on page 3.)

• Your machin

e has an extra memory slot to expand their

memory. (See "Available accessories" on page 140.)

• Zoran IPS Emulation* compatible with PostScript 3 (PS)

enables PS printing.

Print in various environments

Copy originals in several formats

Scan the originals and send it right away

Set a specific time to transmit a Fax

Use USB flash memory devices

©Copyright 1995-2005, Zoran Corporation. All rights reserved.
Zoran, the Zoran logo, IPS/PS3, and OneImage are trademarks
of Zoran Corporation.

Contains UFST and MicroType from Monotype Imaging Inc.

• You can pri

nt with various operating system such as

Windows, Linux and Macintosh systems.

• Your machine is equipped with a USB interface and a

network interface.

• Your machin

e can copy multiple image copies from the
original document on a single page. (See "2-up or 4-up
copying (N-up)" on page 5.)

• There are special functions to erase catalog and newspaper

background. (See "Erasing background images" on page 7.)

• The print quality and image size may be adjusted and

enhance at the same time.

• Scan in colo

r and use the precise compressions of JPEG,

TIFF and PDF formats.

• Quickly scan and send files to multiple destinations using

Networks scanning. (See "Sending a scanned image to
several destinations as an email attachment" on page 4.)

• You can spe

cify a certain time to transmit the fax and also

send the fax to several stored destinations.

• After the transmission, the machine may print out the fax

reports according to the setting.

If you have a USB memory device, you can use it in various
ways with your machine.

• You can scan documents and save them to the device.

• You can directly print data stored to the device.

Features of your new product_ 26

FEATURES BY MODELS

The machine is designed to support all of your document needs from printing and copying to more advanced networking solutions for your business.
Features by models include:

( ●: Included, Blank: Not available)

FEATURES SCX-5835FN SCX-5935FN

USB 2.0 ●●
USB Memory Interface ●●
Document Feeder ●●
Hard Disk ●●
Network Interface Ethernet 10/100 Base TX wired LAN ●●
Duplex (2-sided) printing ●●
FAX ●●

Introduction_ 1

1.introduction

These are the main components of your machine:

This chapter includes:

• M

achine overview

• Control panel overview

• Understanding the Status LED

• Introducing the touch screen and useful buttons

MACHINE OVERVIEW

Front view

1

11

2

12

3

13

4

14

5

15

6

16

7

17

8

18

9

19

10

20

Document feeder cover Multi-purpose tray

Document feeder width
guides

Front cover

Document feeder input tray Document output tray

Document feeder output tray USB memory port

Front cover handle Control panel

Multi-purpose tray handle Toner cartridge

Handle

Multi-purpose tray paper
width guides

Paper level indicator Scanner lid

Optional tray 2

a

Scanner lock switch

Tray 1 Scanner glass

a. Optional device.

Introduction_ 2

Rear view

1

USB host port

6

Duplex unit

2

USB port

7

Rear cover

3

Network port

8

Power receptacle

4

Telephone line socket

9

Power-switch

5

Extension telephone socket
(EXT)

10

Control board cover

Introduction_ 3

CONTROL PANEL OVERVIEW

When you use the touch screen, use your finger only. The screen may
be damaged with a sharpen pen or anything else.

1

Machine Setup

Guides you to the machine setup and advanced settings. (See "Machine Setup" on page 1.)

2

Job Status

Shows jobs currently running, queued jobs and completed.

3

Status

Shows the status of your machine. (See "Understanding the Status LED" on page 4.)

4

Display screen

Displays machine’s current status and prompts during an operation. Set menus easily using the touch screen.

5

Numeric keypad

Dials fax number, and enters the number value for document copies or other options.

6

Clear

Deletes characters in the edit area.

7

Redial/Pause

In standby mode, redials the last number. Also in edit mode, inserts a pause into a fax number.

8

On Hook Dial

Performs same as you hold a handset under the telephone line is engaged.

9

Interrupt

Stops a job in process to do an urgent copy job.

10

Clear All

Reverts the current settings to default values.

11

Power Saver

Sends the machine into power saver mode. You can also turn the power on and off with this button. (See "Power Saver
button" on page 5.)

12

Stop

Stops an operation at any time. The pop-up window appears on the screen showing the current job that the user can stop or
resume.

13

Start

Starts a job.

Introduction_ 4

UNDERSTANDING THE STATUS LED

The color of the status LED indicates the machine's current status.

Check the message on the display screen. Follow the instructions in
the message or refer to troubleshooting part. (See "Understanding
display messages" on page 7.) If the problem persists

, call for service.

INTRODUCING THE TOUCH SCREEN AND
USEFUL BUTTONS

Touch screen

The touch screen on the control panel allows user-friendly operation of the

machine. Once you press the home icon ( ) on the screen, it shows the
main screen.

• : Shows Help. You can find the explanation by feature contents.

• Co

py: Enters the Copy menu.

• F

ax: Enters the Fax menu.

• Scan:

Enters Scan to Email, Scan to PC, Scan to Server menu.

• Sto

red Documents: Enters the Stored Documents menu. (See

"Checking Stored Documents" on page 1.)

• US

B: When USB memory is inserted into the USB memory port on your

machine, USB icon shows on the display screen.

• SmarThru Workflow: Enters the Sma

rThru Workflow menu.

(Optional)

• Toner Info: Shows amount of toner used.

• LCD Brightness: Adjusts the brightness of the touch screen.

• : Changes the display language on the touch screen.

• : This icon appears only when you connect a USB memory module.

• Lo

gout: Logs out from the currently logged-in account.

•Icons shown on the display screen such as SmarThru Workflow

may be grayed out, depending on the optional kit or program
installed in your machine.

•To switch the display screen and see other available icons, press the

left/right arrow on the display screen.

STATUS DESCRIPTION

Off • The machine is off-line.

• The machine is in power saver mode. When

data is received, or any button is pressed, it
switches to on-line automatically.

Green Blinking • When the backlight slowly blinks, the machine

is receiving data from the computer.

• When the backlight blinks rapidly, the

machine is printing data.

On The machine is on-line and can be used.

Red Blinking • A minor error has occurred and the machine is

waiting for the error to be cleared. Check the
display message. When the problem is
cleared, the machine resumes.

• The toner cartridge is near the end of its life.

Order a new toner cartridge. You can
temporarily improve print quality by
redistributing the toner. (See "Replacing the
toner cartridge" on page 2, "Redistributing
toner" on page 1.)

On • The toner cartridge is totally empty. Remove

the old toner cartridge and install a new one.
(See "Replacing the toner cartridge" on
page 2.)

• A paper jam has occurred. (See "Clearing

paper jams" on page 3.)

• The cover is opened. Close the cover.

• There is no paper in the tray. Load paper in

the tray.

• The machine has stopped due to a major

error. Check the display message. (See
"Understanding display messages" on
page 7.)

Introduction_ 5

Machine Setup button

When you press the Machine Setup button, you can browse current
machine settings or change machine values. (See "Machine Setup" on
page 1.)

• : Allows you to move directly to the Copy, Fax, Scan, Stored

Documents menu directly.

• Ma

chine Status: Shows machine’s current status.

• Ad

min Setting: Allows an administrator to set up the machine.

• Usag

e Page Report: You can print the report on the given amount of

printouts depending on the paper size and type.

Job Status button

When you press Job Status button, the screen lists the currently running,
queued and completed jobs.

• Current Job tab: Shows the list of jobs in progress and pending.

• Co

mpleted Job tab: Provides the list of completed jobs.

• Active No

tice tab: Displays any error codes that have occurred.

• No.: Gives the order of jobs.

• Job

Name: Shows job information, such as name and type.

• St

atus: Gives the current status of each job.

• User

: Provides user name-mainly computer name.

• J

ob Type: Displays details of the active job, such as job type, recipient

phone number and other information.

• Detail: Shows detailed information of selected option on the Curre

nt

Job, Completed Job and Active Notice list.

• Delete: Removes selected job from the list.

• Delete All: Removes all jobs from the list.

• Close

: Closes the job status window and switches to previous view.

Power Saver button

When the machine is not in use, save electricity by pressing the power save
mode button. Pressing this button for one second puts the machine into
power save mode. (See "Using power saving feature" on page 2.)

If you press this button for more than three seconds, a window appears,
requesting that you turn the power off. If you choose Yes, the power is
turned off. This button can also be used to turn the button on.

Interrupt button

When you press Interrupt button, the machine goes into interrupt mode,
which means it stops a printing job for urgent copy job. When the urgent
copy job completes, the previous printing job continues.

Interrupt mode is resumed at default value (Off) after the machine is
shut down or reset.

STATUS DESCRIPTION

Off The machine is not in the power save mode.
Blue On The machine is in the power save mode.

STATUS DESCRIPTION

Off The machine is not in interrupt printing

mode.

Blue On The machine is in interrupt printing mode.

Getting started_ 1

1.getting started

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

This chapter includes:

• Settin

g up the hardware

• Supplied software

• System requirements

• Installing USB connected machine’s driver

• Sharing your machine locally

SETTING UP THE HARDWARE

This section shows the steps to set up the hardware, as is explained in the
Quick Install Guide. Make sure you read the Quick Install Guide first and
follow the steps below:

1. Select a stab

le location.

Select a level, stable place with adequate sp

ace for air circulation. Allow

extra space to open covers and trays.
The area should be well ventilated and away from direct sunlight or

sources of heat, cold, and humidity. Do not set the machine close to the
edge of your desk or table.

Printing is suitable for altitudes under 1,500 m (4,921 ft). Refer to the
altitude

setting to optimize your printing. (See "Altitude adjustment" on

page 1.)
Place the machine on a flat, stable surface so th

at there is no incline
greater than 2 mm (0.08 inch). Otherwise, printing quality may be
affected.

2. U

npack the machine and check all the enclosed items.

3. R

emove tape holding the machine securely.

4. Install

the toner cartridge.

5. L

oad paper. (See "Loading paper in the tray" on page 3.)

6. Make sure that all cables are connected to the machine.

7. T

urn the machine on.

Getting started_ 2

SUPPLIED SOFTWARE

After you have set up your machine and connected it to your computer, you
must install the printer software. If you are a Windows or Macintosh OS,
install the software from the supplied CD and if you are a Linux OS user,
download the software from the Samsung website
(www.samsung.com/printer) and install.

Machine software are occasionally updated due to release of new
operating system and etc. If needed, download the latest version from
the Samsung website. (www.samsung.com/printer)

SYSTEM REQUIREMENTS

Before you begin, ensure that your system meets the following
requirements:

Windows

Your machine supports the following Windows operating systems.

•Internet Explorer 5.0 or higher is the minimum requirement for all

Windows operating systems.

•Users who have an administrator right can install the software.

•Windows Terminal Service is compatable with this machine.

OS CONTENTS

Windows • Printer driver: Use this driver to take full advantage of

your machine’s features.

• Pos

tScript printer driver: Use the PostScript driver to

print documents with complex fonts and graphics in the
PS language.

• Sc

anner driver: TWAIN and Windows Image

Acquisition (WIA) drivers are available for scanning
documents on your machine.

• Smart P

anel: This program allows you to monitor the

machine’s status and alerts you when an error occurs
during printing.

• SmarThru Of

ficea: This program is the accompanying

Windows-based software for your multifunctional
machine.

• Di

rect Printing Utility: This program allows you to

print PDF files directly.

• Sams

ung Scan Manager: You can find out about

Scan Manager program information and installed scan
driver's condition.

• Set

IP: Use this program to set your machine’s TCP/IP

addresses.

Macintosh • PostScript Printer Description (PPD) file : Use this

file to run your machine from a Macintosh computer and
print documents.

• Sc

anner driver: TWAIN driver is available for

scanning documents on your machine.

• Smart Panel: This program allows you to monitor the

machine’s status and alerts you when an error occurs
during printing.

• Scan

Manager: You can find out about Scan

Manager program information and installed scan
driver's condition.

Linux • Unified Linux Driver: Use this driver to take full

advantage of your machine’s features.

• Printer Description (PPD) file: Use this file to run

your machine from a Linux computer and print
documents.

• SANE

: Use this driver to scan documents.

• Smart P

anel: This program allows you to monitor the

machine’s status and alerts you when an error occurs
during printing.

a.Allows you to edit a scanned image in various ways using a powerful

image editor and to send the image by email. You can also open
another image editor program, such as Adobe Photoshop, from
SmarThru Office . For details, refer to the on screen help supplied on
the SmarThru Office program. (See "Smarthru Office" on page 3.)

OPERATING

SYSTEM

REQUIREMENT (RECOMMENDED)

CPU RAM

FREE HDD

SPACE

Windows
2000

Pentium II 400 MHz
(Pentium III 933 MHz)

64 MB 
(128 MB)

600 MB

Windows XP Pentium III 933 MHz

(Pentium IV 1 GHz)

128 MB 
(256 MB)

1.5 GB

Windows
Server 2003

Pentium III 933 MHz
(Pentium IV 1 GHz)

128 MB 
(512 MB)

1.25 GB to 
2 GB

Windows
Vista

Pentium IV 3 GHz 512 MB 

(1024 MB)

15 GB

Windows
Server 2008

Pentium IV 1 GHz
(Pentium IV 2 GHz)

512 MB 
(2048 MB)

10 GB

Windows 7 Pentium IV 1 GHz 32-bit

or 64-bit processor or
higher

1 GB (2
GB)

16 GB

• Support for DirectX 9 graphics with 128 MB memory

(to enable the Aero theme).

• DVD-R/W Drive

Windows
Server 2008
R2

Pentium IV 1 GHz (x86)
or 1.4 GHz (x64)
processors (2 GHz or
faster)

512 MB 
(2048 MB)

10 GB

Getting started_ 3

Macintosh

Linux

•It is necessary to claim swap partition of 300 MB or larger for working

with large scanned images.

•The Linux scanner driver supports the optical resolution at maximum.

INSTALLING USB CONNECTED MACHINE’S
DRIVER

A locally connected machine is a machine directly attached to your
computer using the USB cable. If your machine is attached to a network,
skip the following steps below and go on to installing network connected
machine’s driver. (See "Installing network connected machine’s driver" on
page 2.)

Selecting Custom installation allows you to choose programs to
install.

Only use an USB cable no longer then 3m (118 inch. ). Data might not
be transferred to your machine.

Windows

You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a

machine directly connected to your computer. All components necessary for
machine operations will be installed.

1. Make sure that the machine is connected to your computer and powered

on.

If the “New Hardware Wizard” window appears during the
installation procedure, click in the upper right corner of the box

to close the window, or click Cancel.

2. Inse

rt the supplied software CD into your CD-ROM drive.

•Th

e software CD should automatically run and an installation window

appear.

•If the installation window does not appear, click Start and then Run.

Type X:\Setup.exe, replacing “X” with the letter which represents
your drive. Click OK.

•If you use Windows Vista, Windows 7 and Windows 2008 Server R2

click Start > All programs > Accessories > Run.
Type X:\Setup.exe

replacing “X” with the letter which represents

your drive and click OK.

•If

the AutoPlay window appears in Windows Vista, Windows 7 and

Windows 2008 Server R2, click Run Setup.exe in Install or run

program field, and click Continue or Yes in the User Account
Control windows.

3. Click Next.

If necessary, select a language from the drop-down list.

OPERATING

SYSTEM

REQUIREMENTS (RECOMMENDED)

CPU RAM

FREE HDD

SPACE

Mac OS X

10.4 or lower

• Intel

Processors

• PowerPC G4/

G5

• 128 MB for a

PowerPC based
Mac (512 MB)

• 512 MB for a

Intel-based Mac
(1 GB)

1 GB

Mac OS X

10.5

• Intel

Processors

• 867 MHz or

faster Power
PC G4/ G5

512 MB (1 GB) 1 GB

Mac OS X

10.6

• Intel

Processors

1 GB (2 GB) 1 GB

ITEM REQUIREMENTS

Operating
system

RedHat 8.0, 9.0 (32bit)
RedHat Enterprise Linux WS 4, 5 (32/64bit)
Fedora Core 1~7 (32/64bit)
Mandrake 9.2 (32bit), 10.0, 10.1 (32/64bit)
Mandriva 2005, 2006, 2007 (32/64bit)
SuSE Linux 8.2, 9.0, 9.1 (32bit)
SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/64bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64bit)
Ubuntu 6.06, 6.10, 7.04 (32/64bit)
Debian 3.1, 4.0 (32/64bit)

CPU Pentium IV 2.4GHz (IntelCore2)
RAM 512 MB (1024 MB)
Free HDD space 1 GB (2GB)

Getting started_ 4

4. Select Typical installation for a local printer. and then click Next.

If your machine is not already connected to the computer, the
following window will appear.

•After connecting the machine, click Next.

•If you don’t want to connect the machine at this time, click Next,

and No on the following screen. The installation will then start
and a test page will not be printed at the end of the installation.

•The installation window that appears in this User’s Guide may

differ depending on the machine and interface in use.

5. After th

e installation is finished, a window asking you to print a test page

appears. If you choose to print a test page, select the checkbox and click

Next. Otherwise, just click Next and skip.

6. If

the test page prints out correctly, click Yes.

If not, click No

to reprint it.

7. To regi

ster as a user of the machine in order to receive information from

Samsung, select the checkbox and click Finish. You are now registered
to the Samsung web site.

Otherwise, just click Fi

nish.

If the printer driver does not work properly, uninstall the driver and
reinstall it.

For windows follow the steps below to uninstall the driver.

a)Ma

ke sure that the machine is connected to your computer and

powered on.

b)From th

e Start menu, select Programs or All Programs > your

printer driver name > Maintenance.

c)Select Remove and click Next.

You will see a component list so that you can remove any item
individually.

d)Select the components you want to remove and then click Next.
e)When your computer as

ks you to confirm your selection, click Yes.

The selected driver and all of its components are removed from
yo

ur computer.

f)After the s

oftware is removed, click Finish.

Macintosh

The software CD that came with your machine provides you with the PPD
file that allows you to use the CUPS driver or Apple LaserWriter driver (only
available when you use a machine which supports the PostScript driver) for
printing on a Macintosh computer.

Also, it provides you with the TWAIN driver for scanning on a Macintosh
computer.

1. Make sure that the machine is connected to your computer and powered

on.

2. Inse

rt the supplied software CD into your CD-ROM drive.

3. D

ouble-click the CD-ROM icon that appears on your Macintosh desktop.

4. D

ouble-click the MAC_Installer folder.

5. D

ouble-click the Installer icon.

6. En

ter the password and click OK.

7. T

he Samsung Installer window opens. Click Continue.

8. Select Ea

sy Install and click Install. Easy Install is recommended for

most users. All components necessary for machine operations will be
installed.

If you select C

ustom Install, you can choose individual components to

install.

9. When

the message which warns that all applications will close on your

computer appears, click Continue.

10.After the installation is finished, click Quit.
If you have installed scan driver, click Restart.

11.Open the Appl

ications folder > Utilities > Print Setup Utility.

•Fo

r Mac OS X 10.5~10.6, open the Applications folder > System

Preferences and click Print & Fax.

12.Click Add o

n the Printer List.

•Fo

r Mac OS X 10.5~10.6, click the “+” icon; a display window will pop

up.

13.For Mac OS X 10.3, select the USB tab.

•For

Mac OS X10.4, click Default Browser and find the USB

connection.

•For Mac OS X 10.5~10.6, click Default and find the USB connection.

14.F

or Mac OS X 10.3, if Auto Select does not work properly, select

Samsung in Printer Model and your machine name in Model Name.

•F

or Mac OS X 10.4, if Auto Select does not work properly, select

Samsung in Print Using and your machine name in Model.

•For Mac OS X 10.5~10.6, if Auto Select does not work properly, select

Select a driver to use... and your machine name in Print Using.

Your machine appears on the Printer List,

and is set as the default

machine.

15.Click Add.

If the printer driver does not work properly, uninstall the driver and
reinstall it.

Follow steps below to uninstall the driver for Macintosh.

Getting started_ 5

a)Make sure that the machine is connected to your computer and

powered on.

b)Insert the supplied software CD into your CD-ROM drive.
c)Do

uble-click CD-ROM icon that appears on your Macintosh desktop.

d)Doub

le-click the MAC_Installer folder.

e)Doub

le-click the Installer icon.

f)Enter th

e password and click OK.

g)The

Samsung Installer window opens. Click Continue.

h)S

elect Uninstall and click Uninstall.

i)Whe

n the message which warns that all applications will close on

your computer appears, click Continue.

j)Whe

n the uninstall is done, click Quit.

Linux

You need to download Linux software package from the Samsung website
to install the printer softwares.

Follow the steps below to install the softwares.

Installing the Linux Unified Driver

1.Make sure that the machine is connected to your computer and

powered on.

2.W

hen the Administrator Login window appears, type in root in the

Login field and enter the system password.

You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.

3.From th

e Samsung website, download the Unified Linux Driver

package to your computer.

4.Right click the Unif

ied Linux Driver package and extract the package.

5.Doub

le click cdroot > autorun.

6.Whe

n the welcome screen appears, click Next.

7.When the installation is complete, click Finish.

The installation program has added the Unified Driver Configurator
desktop icon and the Unified Driver group to the system menu for your
convenience. If you have any difficulties, consult the on screen help that
is available through your system menu or can otherwise be called from
the driver package Windows applications, such as Unified Driver

Configurator or Image Manager.

Installing the SmartPanel

1.Make sure that the machine is connected to your computer and

powered on.

2.W

hen the Administrator Login window appears, type in root in the

Login field and enter the system password.

You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.

3.F

rom the Samsung website, download the Smart Panel package to

your computer.

4.R

ight click the Smart Panel package and extract the package.

5.D

ouble click cdroot > Linux > smartpanel > install.sh.

Installing the Printer Setting Utility

1.Make sure that the machine is connected to your computer and

powered on.

2.W

hen the Administrator Login window appears, type in root in the

Login field and enter the system password.

You must log in as a super user (root) to install the machine
software. If you are not a super user, ask your system
administrator.

3.F

rom the Samsung website, download the Printer Setting Utility

package to your computer.

4.Right click the Printer Setting Utility package and extract the

package.

5.Double click cdroot > Li

nux > psu > install.sh.

If the printer driver does not work properly, uninstall the driver and
reinstall it.

Follow the steps below steps to uninstall the driver for Linux.

a)Ma

ke sure that the machine is connected to your computer and

powered on.

b)W

hen the Administrator Login window appears, type in “root”

in the Login field and enter the system password.
You must log in as a super user (root) to uninstall the printer

driver. If you are

not a super user, ask your system

administrator.

c)Cl

ick the icon at the bottom of the desktop. When the Terminal

screen appears, type in:
[root@localhost root]#cd /opt/Sa

msung/mfp/uninstall/

[root@localhost uninstall]#./uninstall.sh

d)Click Unin

stall.

e)Click Next.
f)Cli

ck Finish.

SHARING YOUR MACHINE LOCALLY

Follow the steps below to set up the computers to share your machine
locally.

Getting started_ 6

If the Host computer is directly connected to the machine with USB cable
and is also connected to the local network environment, the client computer
connected to the local network can use the shared machine through the
host computer to print.

Windows

Setting up a host computer

1.Install your printer driver. (See "Installing USB connected machine’s

driver" on page 3 , "Installing network connected machine’s driver"
on page 2.)

2.Click th

e Windows Start menu.

3.For Wi

ndows 2000, select Settings > Printers.

•F

or Windows XP/2003, select Printers and Faxes.

•For Windows 2008/Vista, select Control Panel > Hardware and

Sound > Printers.

•For Windows 7, select Control Panel > Hardware and Sound >

Devices and Printers.

•For Windows Server 2008 R2, select Control Panel > Hardware >

Devices and Printers.

4.Righ

t click your printer icon.

5.For

Windows XP/2003/2008/Vista, press Properties.

For Windows 7 and Windows Server 2008 R2, from context menus,
select the Printer p

roperties.

If Printer properties item has ► mark, you can select other
printer drivers connected with selected printer.

6.Select the Sharing ta

b.

7.Check th

e Change Sharing Options.

8.Check th

e Share this printer.

9.Fil

l in the Share Name field. Click OK.

Setting up a client computer

1.Install your printer driver. (See "Installing USB connected machine’s

driver" on page 3 , "Installing network connected machine’s driver"
on page 2.)

2.Click th

e Windows Start menu.

3.Select All progr

ams > Accessories > Window Explorer.

4.Ente

r in IP address of the host computer and press Enter in your

keyboard.

In case host computer requires User name and Password, fill
in User ID and password of the host computer account.

5.Right click the printer icon you want to share and select Connect.

6.If a set

up complete message appears, click OK.

7.Open

the file you want to print and start printing.

Macintosh

The following steps are for Mac OS X 10.5~10.6. Refer to Mac Help
for other OS versions.

Setting up a host computer

1.Install your printer driver. (See "Installing USB connected machine’s

driver" on page 3 , "Installing network connected machine’s driver"
on page 2.)

2.Open

the Applications folder > System Preferences and click Print

& Fax.

3.Select the print

er to share in the Printers list.

4.Select “Sha

re this printer”.

Setting up a client computer

1.Install your printer driver. (See "Installing USB connected machine’s

driver" on page 3 , "Installing network connected machine’s driver"
on page 2.)

2.Open

the Applications folder > System Preferences and click Print

& Fax.

3.Press the “+” icon.

A display window showing the name of your shared printer appears.

4.Select your machine

and click Add.

1

Host computer A computer which is directly connected to

the machine by USB cable.

2

Client computers Computers which use the machine shared

through the host computer.

Network setup_ 1

1.network setup

This chapter gives you step-by-step instructions for setting up the network connected machine and software.

This chapter includes:

• Network enviro

nment

• Introducing useful network programs

• Configuring TCP/IP

• Installing network connected machine’s driver

NETWORK ENVIRONMENT

You can use network after connecting network cable to a corresponding
port on your machine.

You need to set up the network protocols on the machine to use it as your
network machine. You can set up the basic network settings through the
machine's control panel.

The following table shows the network environments supported by the
machine:

If you want to setup DHCP network protocol, go to the
http://developer.apple.com/networking/bo

njour/download/, select the

program Bonjour for Windows due to you

r computer operating system,
and install the program. This program will allow you to fix the network
parameter automatically. Follow the instruction in the installation
window. This program does not support Linux.

INTRODUCING USEFUL NETWORK PROGRAMS

There are several programs available to setup the network settings easily in
network environment. For the network administrator especially, managing
several machines on the network is possible.

SyncThru™ Web Service

Web server embedded on your network machine server, which allows you
to:

• Configure the network parameters necessary for the machine to connect

to various network environments.

• Customize machine settings.

(See "Using SyncThru™ Web Service" on page 1.)

SyncThru™ Web Admin Service

Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of
managing network devices and lets you remotely monitor and troubleshoot
network machines from any site with corporate internet access. Download
this program from http://solution.samsungprinter.com.

SetIP

This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol. (See "Using
SetIP Program" on page 4.)

CONFIGURING TCP/IP

When you connect your machine to a network, you must first configure the
TCP/IP settings for the machine. After you have assigned and verified the
TCP/IP settings, you are ready to install the software on each computer on
the network.

Setting the network address

Contact the network administrator if you are not sure how to configure.
You can set up TCP/IP network parameters,

follow the steps below:

1. C

onnect your machine to the network with an RJ-45 Ethernet cable.

2. T

urned on the machine.

3. Pres

s Machine Setup on the control panel.

4. Pres

s Admin Setting.

5. W

hen the login message appears, enter password.

Touch the password input area, then the question marks appears. Use
the

number keypad on the control panel to enter the password. Once the

password is entered, press OK. (Factory setting:1111)

6. Pre

ss the Setup tab > Network Setup.

7. Select TCP/I

P Protocol.

8. Pres

s IP Setting.

9. Select Static and

then enter IP Address, Subnet Mask and Gateway

address fields. Touch the input area, then enter addresses by number
keypad on the control panel.

10.Pres

s OK.

ITEM REQUIREMENTS

Network interface Ethernet 10/100 Base-TX
Network operating system • Windows

2000/XP/2003/2008/Vista/7/2008
Server R2

• Various Linux OS

• Mac OS X 10.3 ~ 10.6

Network protocols • TCP/IP on Windows

• IPP

• DHCP

• SNMP

• BOOTP