You can search for and add printers within the same sub network. By adding a printer, you can use the
Print function in photo applications such as the Photo function of AllShare Play or Picasa.
Automatically Adding a Printer
1. Move to the Printer Settings. (Menu → System → Device Manager → Printer Settings)
2. Select Add New Printer.
3. The TV scans for printers on the same sub network. When the scan is completed, the connected
printers are listed.
Only network printers connected to the same network are supported. Local printers that are
✎
shared as the PC or the USB cable are not supported. Check the specifications of the printer that
you want to use to see if it supports either a wired or wireless network connection.
If the printer is not in the list, select Refresh.
✎
If the printer is not in the list even after the re-scan, please add the printer manually.
✎
4. Select a printer from the list. If the printer is not supported, it cannot be found or connected.
Manually Adding a Printer
1. Move to the Printer Settings. (Menu → System → Device Manager → Printer Settings)
2. Select Add New Printer.
3. Select Add Manually.
4. Enter the IP address and port number of the printer to be connected and select Add. The selected
printer is added to the printer list.
The default port number is 9100. You can set the port number from 0 to 65535.
✎
5. If the printer is added to the list, the pop up message box appears. To set the added printer as the
default printer, select Yes.
If the printer is not supported, it cannot be found or connected.
✎
Setting a Printer as the Default Printer in the Printer List
If you have more than one printer, one can set the default printer.
1. Move to the Printer Settings. (Menu → System → Device Manager → Printer Settings)
2. Select a printer to be set as the default printer from the printer list.
3. Press the E button (for Standard Remote Control) or tap the touch pad (for Smart Touch Control)
and then select Set as Default Printer. The c mark will appear on the left-hand side of the selected
printer.
After adding a printer, you can print a test page. To print a test page, repeat Steps 1 and 2 above,
✎
press the E button (for Standard Remote Control) or tap the touch pad (for Smart Touch Control)
and then select Print Test Page.
To delete a printer from the list, repeat Steps 1 and 2 above, press the E button (for Standard
✎
Remote Control) or tap the touch pad (for Smart Touch Control) and then select Delete.
English - 1
Printing a Photo (AllShare Play)
You can print a photo using the Tools menu in the photo file list screen. The printer and the TV should be
on the same sub network before printing.
1. Select a photo from the photo file list.
2. Press the TOOLST button (for Standard Remote Control) or use the Smart Touch Control to select
Tools and then select Print. The Print screen appears.
Series
Samsung SCX-6545 SeriesSCX-6545N/NG
Samsung SCX-6545X SeriesSCX-6545NX
Samsung SCX-6x55 SeriesSCX-6555N/NG/FNG
Samsung SCX-6x55X Series
Samsung SCX-6x22 Series
Samsung SCX-6x45 Series
Samsung SCX-8030 8040 Series
Samsung SCX-8123 8128 Series
Samsung CLX-216x Series
Samsung CLX-3160 Series
Samsung CLX-4190 Series
Samsung CLX-6200 Series
Samsung CLX-6220 Series
Samsung CLX-6240 Series
Samsung CLX-6250 Series
Samsung CLX-6260 Series
Samsung CLX-8380 Series
Samsung CLX-8385 Series
Samsung CLX-8385X Series
Samsung CLX-8540 Series
Samsung CLX-8540X Series
Samsung CLX-9250 9350 Series
Samsung CLX-92x1 93x1 Series
Samsung SCX-1490W Series
Samsung SCX-2000FW Series