Page 1
WEATHERPROOF NIGHT
VISION CAMERA
User Manual
SCO-2030R
SCO-2040R
Page 2
WEATHERPROOF NIGHT VISION CAMERA
User Manual
Copyright
Samsun g Techwin Co ., Ltd. Al l right s reserved.©
Tra dem ark
The name of t his product is the re gistered tradem ark of Samsung Techwin C o., Ltd.
Other tr ademarks mentio ned in this manual are t he registered tr ademark of their res pective compan y.
Restriction
Samsung Tech win Co., Ltd shall rese rve the copyrig ht of this document . Under no circumst ances, this docum ent
shall be rep roduced, distr ibuted or changed, p artially or who lly, without formal a uthorization o f Samsung Techwin.
Disclaimer
Samsung Tech win makes the best to v erify the integr ity and correc tness of the conte nts in this documen t, but
no formal gu arantee shall be pr ovided. Use of this d ocument and the sub sequent results s hall be entirely on
the user’s ow n responsibilit y. Samsung Techwin rese rves the right to c hange the content s of this document
without p rior notice.
Warra nty
If the pro duct does not oper ate properly in no rmal conditions , please let us know. S amsung Techwin will res olve
the probl em for free of charge. T he warranty pe riod is 3 years. How ever, the followings ar e excluded:
•
If the sys tem behaves abnorm ally because you r un a program irrelev ant to the system ope ration.
•
Deterio rated perform ance or natural wor n-out in proces s of time
Design and specifications are subject to change without prior notice.
is the regis tered logo of Sams ung Techwin Co., Ltd.
Page 3
Before operating the camera, confirm the camera model and correct input power voltage.
To help you understand this manual thoroughly, we’ll introduce our model description.
■ SCO-2030R/2040R SERIES
• NTSC MODEL • PAL MODEL
SCO-2030R/2040RN SCO-2030R/2040RP
POWER SOURCE
•
SCO-2030R/2040RN / SCO-2030R/2040RP : DC 12V
Page 4
Safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
CAUTION:
W
ARNING
To prevent damage which may result in fire or electric shock hazard, do not expose this
•
appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
•
with the installation instructions.
WARNING
B
1.
e sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2.
Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3.
Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4.
Securely plug the power cord into the power receptacle. insecure connection may cause
fire.
5.
When installing the camera, fasten it securely and firmly. The fall of camera may cause
personal injury.
T
COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
T
his symbol indicates that dangerous voltage consisting a risk of electric
shock is present within this unit.
his exclamation point symbol is intended to alert the user to the
T
presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
4_ Safety information
Page 5
D
6.
o not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers
filled with water on top of the camera. doing so may cause personal injury due to fire,
electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. doing so may cause fi re or
7.
electric shock.
8.
If any unusual smells or smoke come from the unit, stop using the product. in such case,
immediately disconnect the power source and contact the service center. continued use in
such a condition may cause fire or electric shock.
9.
If this product fails to operate normally, contact the nearest service center. never
disassemble or modify this product in any way. (samsung is not liable for problems caused
by unauthorized modifications or attempted repair.)
10.
W
hen cleaning, do not spray water directly onto parts of the product. doing so may cause
fire or electric shock.
CAUTION
1.
D
o not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.
2.
Do not install in a location subject to high temperature (over 50°C), low temperature (below
-10°C), or high humidity. Doing so may cause fire or electric shock.
3.
If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.
4.
Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fire or damage to the product.
5.
Keep out of direct sunlight and heat radiation sources. It may cause fire.
6.
Install it in a place with good ventilation.
7.
Avoid aiming the camera directly towards extremely bright objects such as sun, as this
may damage the CMOS image sensor.
8.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
9.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10.
D
o not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.
●
SAFETY INFORMATION
English_5
Page 6
Safety information
FCC STATEMENT
T
his device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :
This device may not cause harmful interference, and
1)
This device must accept any interference received including interference that may cause
2)
undesired operation.
CAUTION
his equipment has been tested and found to comply with the limits for a Class A digital
T
device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
I
C Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
6_ Safety information
(Waste Electrical & Electronic Equipment)
Page 7
Important safety instructions
Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with dry cloth.
6.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
7.
instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus
8.
(including amplifi ers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fi t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.
Only use attachments/accessories specifi ed by the manufacturer.
12.
Use only with cart, stand, tripod, bracket, or table specifi ed by the
manufacturer, or sold with the apparatus.
13.
Unplug this apparatus when a card is used. Use caution when moving the
cart/ apparatus combination to avoid injury from tip-over.
14.
Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects
fi lled with liquids, such as vases, shall be placed on the apparatus
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.
●
SAFETY INFORMATION
English_7
Page 8
Contents
INTRODUCTION
TROUBLESHOOTING
SPECIFICATIONS
9
INSTALLATION
11
CONNECTION
12
4
1
5
1
9
Package contents
10
Part names and functions
11
Installing the camera
12
Connecting to Monitor
12
Connecting to Power
14
Troubleshooting
15
Specifi cations
17
Dimension
8_ Contents
Page 9
Introduction
PacKaGe contentS
●
INTRODUCTION
Camera
Wrench
The quantity of Camera, Wrench, Cable, Screw and Wall anchor varies depending on the model.
J
Screw
WEATHERPROOF NIGHT
VISION CAMERA
SCO-2030R
SCO-2040R
Quick Manual
Quick Manual
Wall anchor
English_9
Page 10
Introduction
Part naMeS and functionS
b
c
Name Description
Camera Sunshield
Sunshield Adaptor Fixing the sunshield onto the camera.
b
Power Cable Used to plug the power cable.
c
BNC Cable BNC terminal for video signal output.
Illumination Sensor Detects incoming light to control the IR LED.
IR LED These infrared LED’s are controlled by the illumination sensor.
Focal length of 6mm or 8mm enables you to cover relatively longer
Lens
range of monitoring.
=
SCO-2030R-f
6mm,
SCO-2040R-f
=
8mm
10_ Introduction
Page 11
Installation
Installing the camera
The camera can be installed on the wall, ceiling, shelf or a desired position using the provided
bracket.
1. Select a position where you want to install the camera.
Make sure the selected position can sustain the weight of the camera.
2. Use the screw bolts to mount the camera bracket onto the wall or ceiling.
M4 X L20
sized screws
wall or ceiling
3. Adjust the camera to target the video location by tightening camera bracket’s screw and
lock ring on the camera bracket
Up
Down
Left Right
Lock Ring
●
INSTALLATION
4. Connect the camera cable to the camera.
-180° +180°
English_11
Page 12
Connection
CONNECTING TO MONITOR
Please connect the Video output jack located on the back of the camera to the monitor.
Monitor
Camera
y
The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
y
Please turn off the power when connecting.
CONNECTING TO POWER
Connect the adapter to the power input connector as shown in the figure below. Use a DC 12V.
Please check the standard power requirement before connecting the power.
( The adapter is not provided with the camera.)
Camera
POWER
12_ Connection
Page 13
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size
(AWG)
Resistance (Ω/m) 0.213 0.134 0.078 0.050 0.030 0.018
Voltage Drop (V/m) 0.077 0.048 0.028 0.018 0.011 0.006
y
As shown in the table above, voltage decreases as the wire gets longer. Therefore,
the use of an excessively long power cable to the camera may affect the camera’s
performance.
½
Standard voltage for camera operation : DC 12V±10%.
½
There may be some deviation in voltage drop depending on the type of wire and the
manufacturer.
#28
#26
#24
#22
2
(0.08mm
)
(0.13mm2)
(0.22mm2)
(0.33mm2)
Please use a power adaptor that meets the required standards.
Please connect the power after installation.
Please use the input power with just one camera and other devices must not be connected.
#20
(0.52mm2)
#18
(0.83mm2)
●
CONNECTION
English_13
Page 14
Troubleshooting
TROUBLESHOOTING
If you have trouble operating your camera, refer to the following table. If the guidelines do
not enable you to solve the problem, contact an authorized technician.
PROBLEM SOLUTION
Check if the lens are stained. If dirty, clean the lens with soft, clean cloth.
The image on the screen is dim.
The contrast on the screen is too weak.
▶
▶
The image is dimmer at night than daytime. If the focus is not right,
adjust it at daytime.
▶
Adjust the contrast feature of the monitor.
▶
If the camera is exposed under too strong light, change the camera
position.
The camera is not work properly,
and the surface of the camera
case is hot.
14_ Troubleshooting
▶
Check that you have connected the camera to a proper power
(DC 12V±10%).
Page 15
Specifications
SPECIFICATIONS
SCO-2040RN SCO-2030RP SCO-2040RP
Video
Imaging Device
Active Pixels
Scanning System Interlace
Synchronization Internal
Frequency
Horizontal Resolution
Min. Illumination
s / N Ratio
Lens Type
Focal Length (Zoom Ratio)
Max. Aperture Ratio 2
Operational
Shutter Mode
Gain Control
White Balance Auto (3200°K ~ 6500°K)
Digital Noise Reduction
Day & Night
IR Distance 25m
Environmental
Operating Temperature
/ Humidity
IP Grade
1/3" CMOS
976x496
H: 15,734 Hz
V: 59.94 Hz
650TVL
0Lux (IR-LED)
50dB
8mm
Auto(Rolling Shutter)
Auto
Auto
MECHA IR CUT FILTER
-10°C ~ +50°C (+14°F ~ +122°F) / 20%~85% RH
IP66
H: 15,625 Hz
V: 50 Hz
6mm 8mm
●
SPECIFICATIONS
English_15
Page 16
Specifications
SPECIFICATIONS
SCO-2040RN SCO-2030RP SCO-2040RP
Electrical
Input Voltage
Power Consumption
Mechanical
Dimension
Weight
※
This specifi cation can be changed without notice for performance improvement of product.
DC 12V
3W
W 69 x H 63 x L 182.5 mm
245g
16_ Specifi cations
Page 17
DImeNsION
Unit : mm
●
●
SPECIFICATIONS
SPECIFICATIONS
English_17
Page 18
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : +1-877-213-1222 Direct : +1-201-325-6920
Fax : +1-201-373-0124
www.samsungcctvusa.com
www.samsungtechwin.com
www.samsungsecurity.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park
Chertsey, Surrey, UNITED KINGDOM KT16 OPS
+44-1932-45-5300, FAX : +44-1932-45-5325
TEL :
P/NO. :
PT01-001994A
Loading...