Samsung SCL860, SCL870 User guide

ENGLISH

Video Camcorder

8mm COLOR LCD

SCL810/L860/L870

Hi SCL810/L860/L870

	START/
STOP
SELF	DISPLAY		COUNTERRESET
TIMER
	STILL	ZERO		WIDE
		RETURN
			TELE

Owner’s Instruction Book

Before operating the unit, please read

this instruction book thoroughly, and retain it for future reference.

ELECTRONICS

US

ENGLISH
Contents
Notices and Safety Instructions
Getting to Know Your Camcorder
Features .........................................................................................................................................................................................	12
Descriptions
■ Front View/Side View/Rear View ..............................................................................................................................	13, 14, 15
■ OSD (On Screen Display) ...................................................................................................................................................	16
Accessories Supplied with the Camcorder.....................................................................................................................................	18
Remote Control (SCL860/L870 only) .............................................................................................................................................	19
■ Self Timer Recording ...........................................................................................................................................................	19
Preparing
Adjusting the Hand Strap and Shoulder Strap ...............................................................................................................................	20
Lithium Battery Installation .............................................................................................................................................................	21
Connecting the Power Source........................................................................................................................................................	22
■ To use the AC Power Adapter..............................................................................................................................................	22
■ To use the Battery Pack .......................................................................................................................................................	23
Using the Battery Pack...................................................................................................................................................................	24
■ Continuous Recording time table.........................................................................................................................................	24
■ Battery Level Display ...........................................................................................................................................................	25
Inserting and Ejecting a Cassette .................................................................................................................................................	26
Basic Recording
Making Your First Recording ..........................................................................................................................................................	27
Hints for Stable Image Recording .................................................................................................................................................	29
■ Recording with LCD Monitor................................................................................................................................................	29
■ Recording with Viewfinder....................................................................................................................................................	29
Adjusting the LCD ..........................................................................................................................................................................	30
Adjusting Focus of the VIEWFINDER ............................................................................................................................................	31
Playing back a tape on the LCD.....................................................................................................................................................	32
■ Adjusting the LCD during PLAY...........................................................................................................................................	33
■ Controlling the Sound from the Speaker .............................................................................................................................	33
■ Viewing a Still Picture ..........................................................................................................................................................	33
■ Picture Search .....................................................................................................................................................................	33
Advanced Recording
Zooming In and Out .......................................................................................................................................................................	34
Digital Zoom ...................................................................................................................................................................................	35
EASY mode (for beginners) ...........................................................................................................................................................	37
CUSTOM-Creating your own customized recording settings.........................................................................................................	38
DIS (Digital Image Stabilizer, SCL860/L870 only) .........................................................................................................................	39
MF/AF (Manual Focus/Auto Focus)................................................................................................................................................	40
BLC.................................................................................................................................................................................................	41

2

	ENGLISH
Contents (continued)
Program AE (Automatic Exposure) ................................................................................................................................................	42
DSE (Digital Special Effects) in CAMERA mode ...........................................................................................................................	44
Setting and Recording DATE/TIME ................................................................................................................................................	46
Selecting and Recording a Title .....................................................................................................................................................	48
Fade In and Out .............................................................................................................................................................................	50
PIP (SCL860/L870 only).................................................................................................................................................................	51
Snap Shot (SCL860/L870 only) .....................................................................................................................................................	52
White Balance ................................................................................................................................................................................	53
Demonstration ................................................................................................................................................................................	54
Setting the Date/Title color.............................................................................................................................................................	55
Lighting Techniques........................................................................................................................................................................	56
Playing back a Tape
To watch with LCD ........................................................................................................................................................................	57
To watch with TV monitor ...............................................................................................................................................................	57
Various Functions in PLAYER mode ..............................................................................................................................................	59
Adjusting the LCD ..........................................................................................................................................................................	60
Setting the Speaker ON/OFF .........................................................................................................................................................	60
DSE in PLAYER mode ...................................................................................................................................................................	60
Multi Playback (Using the PAL60 System) .....................................................................................................................................	61
USB interface (SCL870 only)...........................................................................................................................................	62
Installing USB Media 2.0 Program .................................................................................................................................................	63
Maintenance
Cleaning and Taking care of the Camcorder..................................................................................................................................	66
■ Cleaning the Viewfinder ......................................................................................................................................................	66
■ Cleaning the LCD Panel.......................................................................................................................................................	66
■ Cleaning the Video Heads ..................................................................................................................................................	66
■ Storing the Camcorder.........................................................................................................................................................	66
Using Your Camcorder Abroad......................................................................................................................................	67
Troubleshooting
Self Diagnosis Display ...................................................................................................................................................................	68
Checking.........................................................................................................................................................................................	69
Moisture Condensation ..................................................................................................................................................................	71
Specifications ............................................................................................................................................................................	72
Index...............................................................................................................................................................................................	73
Warranty ......................................................................................................................................................................................	75

3

ENGLISH

Notices and Safety Instructions

Notices regarding rotation of LCD screen

Please rotate the LCD screen carefully as illustrated. Unintended rotation may cause damage to the inside of the hinge that connects the LCD screen to the Camcorder.

1)LCD screen closed.

2)Standard recording by using the LCD screen.

3)Making a recording by looking at the LCD screen from the top.

4)Making a recording by looking at the LCD screen from the front.

5)Making a recording with the LCD screen closed.

1)
2)
	90°
3)
90°
4)
	90°
5)
	90°

Notices regarding the LENS

Do not let the LENS point toward the sun. Direct sunlight can damage the CCD (Charge Coupled Device).

4

ENGLISH

Notices and Safety Instructions

Notices regarding electronic viewfinder

1)	Do not place the camcorder so that the
	viewfinder is pointing towards the sun.	1	2	3
	Direct sunlight can damage the inside of the
	viewfinder. Be careful when placing the
	camcorder under sunlight or by a window.
2)	Do not pick up the camcorder by the viewfinder.
3)	Unintended rotation may cause damage to the
	viewfinder.

Notices regarding moisture condensation

1)A sudden rise in atmospheric temperature may cause form inside the camcorder.

for example:

■ When you take the camcorder from cold temperature warm temperature inside during the winter.

■When you take the camcorder from cool temperature hot temperature outside during the summer.

2) If the “DEW” protection feature is activated, leave the dry, warm room with the cassette compartment opened removed.

3)If the “DEW” protection feature is activated unexpectedly, and you want to override it, detach, then reinstall the

and lithium battery.	DEW
Please make sure that the condensation has disappeared
completely. (see page 71)

5

ENGLISH

Notices and Safety Instructions

Notices regarding the battery pack

Make sure that the battery pack is charged before recording outdoors.

To preserve battery power, keep your camcorder turned off when you are not operating it.

When your camcorder is in CAMERA mode, if it is left in STANDBY for more than 5 minutes without operation, it will automatically turn off to protect against unexpected battery discharge.

It is a good idea to use the viewfinder instead of the LCD when recording for a long time because the LCD uses more battery power.

Make sure that the battery pack is fitted firmly into place. Dropping the battery pack might damage it.

When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste.

Notices regarding the Lithium battery

Warning: Keep the LITHIUM BATTERY out of the reach of children. Should the battery be swallowed, consult a doctor immediately.

The lithium battery maintains the clock function, TITLE, CUSTOM function and preset contents memory; even if the battery pack or AC power adapter is removed.

The lithium battery for the camcorder lasts about 8~10 months under normal operation from time of installation.

When the lithium battery becomes weak or dead, the date/time indicator flashes about 5 seconds when

you set the power switch to CAMERA. In this case, replace the lithium battery with type CR2025. (see page 21)

WARNING:

LITHIUM BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.

*When the lithium battery becomes weak or dead please contact your local dealer. The batteries have to be dealt with as chemical waste.

6

Notices and Safety Instructions

Notices with Recording or Playback by using LCD

1)The LCD monitor is manufactured by using high precision technology. However, there may be some tiny specks (red, blue or green in color) that appear on the LCD monitor. These specks are normal and do not affect the recorded picture in any way.

2)When using the LCD monitor outdoors in direct sunlight, it may be difficult to view. If this occurs, use the viewfinder.

3)The LCD monitor's OSD is turned off when the LCD is placed in the forward direction.

ENGLISH

Notices regarding the hand strap

It is very important to adjust the hand strap for better recording. (see page 20)

Do not insert your hand in the hand strap forcibly, the buckle may be damaged.

Notices regarding video head cleaning

To ensure normal recording and clear picture, clean the video heads. When playing back the pictures,

if they are noisy or hardly visible, the video heads may be dirty. If this happens, clean the video heads with a dry type cassette cleaner.

Do not use a wet type cassette cleaner. It may damage the video heads. (see page 66)

5 minutes off timer in STANDBY mode

To protect against tape and head-drum wear, your camcorder will automatically turn off if it is left in STANDBY mode without operation for more than 5 minutes.

7

ENGLISH

Notices and Safety Instructions

Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock.

This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying this product.

1.READ INSTRUCTIONS:

All the safety and operating instructions should be read before the CAMCORDER is operated.

2.RETAIN INSTRUCTIONS:

The safety and operating instructions should be retained for future reference.

3.HEED WARNINGS:

All warnings on the CAMCORDER and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS:

All operating and maintenance instructions should be followed.

5.CLEANING:

Unplug this CAMCORDER from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.

Use a dry cloth used for dusting cabinets.

6.ATTACHMENTS:

Do not use attachments not recommended by the CAMCORDER product manufacturer as they may be hazardous.

7.WATER AND MOISTURE:

Do not use this CAMCORDER near water;

for example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool or lake.

8.ACCESSORIES:

Do not place this CAMCORDER on an unstable cart, stand, tripod, bracket or table.

The CAMCORDER may fall, causing serious injury to a child or adult, and serious damage to the unit.

Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the CAMCORDER. Any mounting of the unit should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.

A.An appliance and cart combination should be moved with care.

Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. PORTABLE CART WARNING

(Symbol provided by RETAC)

8

ENGLISH

Notices and Safety Instructions

9.VENTILATION:

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of

the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered.

Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.

This CAMCORDER should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.POWER SOURCES:

The CAMCORDER should be operated only from the type of power source indicated on the label.

If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company.

A CAMCORDER is intended to be operated from battery power, or other sources, refer to the operating instructions.

13.OUTDOOR ANTENNA GROUNDING:

If an outside antenna or cable system is connected to the CAMCORDER, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding to conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

See figure below.

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

11.GROUNDING OR POLARIZATION:

This CAMCORDER may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your outlet.

Do not defeat the safety purpose of the polarized plug.

12.POWER-CORD PROTECTION:

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords or plugs, convenient receptacles, and the point where they exit from the unit.

		ANTENNA
		DISCHARGE UNIT
		(NEC SECTION 810-20)
	ELECTRIC
	SERVICE	GROUNDING CONDUCTORS
	EQUIPMENT
		(NEC SECTION 810-21)
		GROUND CLAMPS
		POWER SERVICE GROUNDING
		ELECTRODE SYSTEM
		(NEC ART 250, PART H)
	NEC NATIONAL ELECTRICAL CODE

9

ENGLISH

Notices and Safety Instructions

14.LIGHTNING:

For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.

This will prevent damage to the CAMCORDER due to lightning and power-line surges.

15.POWER LINES:

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING:

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.OBJECTS AND LIQUIDS:

Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock.

Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug uni and have it checked by a technician before use.

18.SERVICING:

Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

19.DAMAGE REQUIRING SERVICE:

Unplug this CAMCORDER from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged.

b.If any liquid has been spilled onto, or objects have fallen into the CAMCORDER.

c.If the CAMCORDER has been exposed to rain or water.

d.If the CAMCORDER does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the CAMCORDER to its normal operation.

e.If the CAMCORDER has been dropped or the cabinet has been damaged.

f.When the CAMCORDER exhibits a distinct change in performance, this indicates a need for service.

20.REPLACEMENT PARTS:

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21.SAFETY CHECK:

Upon completion of any service or repairs to this CAMCORDER, ask the service technician to perform safety checks to determine that the CAMCORDER is in safe operating order.

10

ENGLISH

Notices and Safety Instructions

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

USER INSTALLER CAUTION:

Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by this party responsible for compliance to part 15 FCC rules.

11

ENGLISH

Getting to Know Your Camcorder

Features

Your camcorder has many features for recording and playing back.

Snap Shot (SCL860/L870 only)

The Snap Shot function lets you record an object at a standstill for a limited time in Camera mode. (see page 52)

PIP (SCL860/L870 only)

The PIP function shows where the center of the image is while recording in Digital Zoom of the Camera mode. (see page 51)

BLC

When you record a subject with the light source behind the subject or a subject with a light background, use the BLC function. (see page 41)

DSE (Digital Special Effects)

The DSE enables you to give a creative look to your films by adding various special effects. (see page 44)

Program AE (Auto Exposure)

The Program AE enables you to adapt the shutter speed and aperture to the type of scene to be filmed. (see page 42)

DIS (SCL860/L870 only)

The DIS compensates for unstable images caused by hand shake, particularly at high magnification. (see page 39)

22x High ratio zoom lens

Zooming is a recording technique that lets you change the size of the subject in the picture. For more professional recordings, use the zoom function. (see page 34)

Digital Zoom (880x)

Zooms more than 22x are performed digitally. (see page 35)

Macro

The macro function allows you to record your subject at close range.

You have to adjust the zoom fully wide for macro recording. (see page 34)

EASY

This mode enables even the beginner to easily make a recording. (see page 37)

Multi PLAYBACK (PAL60)

PAL60 is a special output signal format with which a tape recorded on this camcorder (NTSC format) can be viewed on a PAL TV.

Hi8

Hi8 is an enhanced 8mm format.

When a Hi8 cassette is inserted, the camcorder will automatically select the Hi-8 format for record or playback.

12

Getting to Know Your Camcorder	ENGLISH
Front View
3. REC SEARCH (REW)	4. REC SEARCH (FF)
2. PLAY/STILL (LIGHT)	5. DATE/TIME (STOP)
6. TAPE EJECT	7. EVF

13. VIDEO LIGHT

1. LENS

9. Remote Sensor

10. LCD

8.MIC 11. CUSTOM

12.EASY

1.Lens (see page 72)

2.PLAY/STILL (LIGHT) (see page 58)

PLAY/STILL works in PLAYER mode. LIGHT works in CAMERA mode.

3.REC SEARCH (REW)

REC SEARCH works in STANDBY mode. (see page 28) REW works in PLAYER mode. (see page 59)

4.REC SEARCH (FF)

REC SEARCH works in STANDBY mode. (see page 28) FF works in PLAYER mode. (see page 59)

5.DATE/TIME (STOP)

DATE/TIME works in CAMERA mode. (see page 47)

STOP works in PLAYER mode. (see page 58)

6.TAPE EJECT (see page 26)

Use when ejecting the tape.

7.EVF (Electronic Viewfinder)

8.MIC

MIC works in CAMERA mode.

9.Remote Sensor (SCL860/L870 only)

10.LCD (see page 29)

11.CUSTOM

CUSTOM works in CAMERA mode.

12.EASY

EASY works in CAMERA mode.

13.VIDEO LIGHT

13

ENGLISH

Getting to Know Your Camcorder

Side View

24.BLC

23.FADE

20.SPEAKER

22. LCD Open

14. MENU ON/OFF

15. ENTER (MF)

16. UP/DOWN Dial (VOLUME)

17. S-VIDEO out

18. P.AE

19. DSE

21. Lithium Battery

14.MENU ON/OFF (see page 30)

MENU ON/OFF works in CAMERA and PLAYER mode.

15.ENTER (MF) (see page 30)

ENTER works in MENU mode.

MF works in CAMERA mode. (see page 40)

16.UP/DOWN dial (VOLUME)

UP/DOWN dial works in MENU mode. (see page 30) VOLUME works in PLAYER mode. (see page 60)

17.S-VIDEO out

18.PROGRAM AE (see page 42)

PROGRAM AE (Auto Exposure) works in CAMERA mode.

19.DSE (see page 44)

DSE works in CAMERA and PLAYER mode.

20.SPEAKER (see page 60)

Speaker works in PLAYER mode.

21.Lithium Battery (see page 21)

22.LCD open

23.FADE (see page 50)

FADE works in CAMERA mode.

24.BLC (see page 41)

BLC works in CAMERA mode

14

ENGLISH

Getting to Know Your Camcorder

Rear View

	25. ZOOM
36. BATTERY EJECT		26. CASSETTE
		Compartment
27. Hooks for shoulder strap
37. SNAP SHOT/D.ZOOM		39. USB JACK
28. AUDIO/VIDEO Out
32. START/STOP	MIC	(SCL870 only)
		33. External MIC
35. Battery Pack Compartment
		(SCL860/L870 only)
		29. LENS Cap
38. Recharging Indicator
34. DC Jack		30. Hand Strap
	31. POWER Switch

25.ZOOM (see page 34)

26.Cassette Compartment

27.Hooks for Shoulder Strap (see page 21)

28.AUDIO/VIDEO out (see page 57)

29.LENS Cap

30.Hand Strap (see page 20)

31.POWER Switch (see page 22)

-CAMERA : Select to record.

-OFF : Select to turn off the camcorder.

-PLAYER : Select to playback.

32.START/STOP (see page 28)

START/STOP works in CAMERA mode.

33.External MIC (SCL860/L870 only) (see page 72)

34.DC Jack (see page 22)

35.Battery Pack Compartment (see page 23)

36.BATTERY EJECT

37.SNAP SHOT/D.ZOOM

SNAP SHOT works in CAMERA mode. (SCL860/L870 only, see page 52) D.ZOOM works in CAMERA mode. (SCL810 only, see page 36)

38.Recharging Indicator (see page 23)

39.USB Jack (SCL870 only) (see page 65)

15

ENGLISH

Getting to Know Your Camcorder

OSD (On Screen Display)

You can turn the OSD on/off by setting the Display menu on/off.

The TITLE, DATE/TIME, EASY and CUSTOM functions can be operated even after the OSD is turned off.

The OSD is displayed in the viewfinder and the LCD monitor.

	a. Zoom position (see page 34)	OSD in CAMERA mode
	Indicates zoom position.

b.

DIS (SCL860/L870 only)

r

(see page 39)

b a

t

s q

Indicates DIS is activated.

c

p

c.

Battery level (see page 25)

Hi8

REC

W

T

880 x

0:00:00

o

Indicates the power left in the battery.

m

CINEMA

XX

EASY

x

f

OFF

z

(

)

n

TITLE

e

BLC

d.

Manual Focus (see page 40)

k

d

Indicates manual focus is on.

y

j

g

WAIT-10S

12:00 AM

Auto Focus is not displayed.

h

SELF-30S

AUG. 29, 2003

i

e.

BLC (see page 41)

Indicates BLC is activated.

f.

Program AE (see page 42)

mode

Indicates Program AE mode is

activated. (

,

,

,

,

)

r

q

g.

Self record waiting timer.

(SCL860/L870 only) (see page 19)

c

Hi8

PLAY

p

Indicates 10 second timer.

0:00:25

o

h.

Self record recording timer.

Z.RTN

u

TITLE

CINEMA

v

(SCL860/L870 only) (see page 19)

TAPE!

l

(30 seconds or END).

w

VOLUME

i. Date (see page 46)

Indicates the date of the recording.

16

ENGLISH

Getting to Know Your Camcorder

OSD (On Screen Display)

j.Time (see page 46)

Indicates the time you are recording.

k.Title (see page 48)

Indicates the recorded title you have set. It is superimposed on the scene.

l.Self diagnosis (see page 68)

Displays different diagnostic indicators concerning the camcorder’s operation.

m.DSE (Digital Special Effect) (see page 44)

Indicates the DSE mode is activated.

The operation modes are GHOST, STROBE, SEPIA, B&W, NEG., MIRROR, ART, MOSAIC, 16:9(WIDE) and CINEMA.

n.White Balance mode (see page 53)

Indicates the White Balance mode is activated.

The White Balance modes are AUTO, INDOOR( ) and OUTDOOR( ).

o.Tape counter

Indicates amount of the tape used.

p.Operation mode

Indicates the operation mode is activated.

The operation modes are STBY, REC , STOP, PLAY( ), FF( ), REW( ), EJECT.

q.Hi8 (see page 58)

Indicates you are using Hi8 tape when recording or playing back.

r.DEW ( ) condensation (see page 71)

Monitors the moisture condensation.

s.Digital zoom (see page 35)

Indicates digital zoom is activated.

t.Snap Shot (see page 52)

Indicates the time left during Snap Shot Recording.

u.Zero return (SCL860/L870 only) (see page 59)

Indicates that the zero return is activated.

v.PB DSE

Shows that the PB DSE mode is active.

w.VOLUME

x.EASY & CUSTOM

Shows when the easy or custom mode is active.

y.LIGHT

Shows when the Light is switched on.

z. Remocon (

OFF) (SCL860/L870 only)

Indicates the remocon off mode is activated.

17

ENGLISH

Getting to Know Your Camcorder

Accessories Supplied with Camcorder

Make sure that the following basic accessories are supplied with your camcorder.

Basic Accessories

1.AC Power Adapter. (see page 22)

2.AC cord. (see page 22)

3.Battery Pack. (see page 23)

4.Audio/Video Cable. (see page 57)

5.Shoulder strap. (see page 21)

6.Instruction Book.

7.Remote Control. (see page 19) (SCL860/L870 only)

8.Lithium Battery for Remote Control. (see page 19) (SCL860/L870 only) Lithium Battery for Clock.

(TYPE: CR2025, see page 21)

9.Software CD (SCL870 only)

10.USB Cable (SCL870 only)

11.USB AUDIO Cable (SCL870 only)

1. AC Power Adapter	2. AC cord	3. Battery Pack
AD44-00038A	AD39-00028A	AD43-00065A
4. AUDIO/VIDEO Cable	5. Shoulder Strap	6. Instruction Book
		Video Camcorder
		8mm
		COLOR LCD

AD39-40200A	AD63-00202A
7. Remote Control	8. Lithium Batteries	9. Software CD
AD59-00062A	AD43-10130H	AD46-00033B

10. USB Cable

11. USB AUDIO Cable

Optional Accessories

12. S-VIDEO cable. (see page 58)

AD39-00073A AD39-00074A

12. S-VIDEO cable

AC39-42001Z

18

ENGLISH

Getting to Know Your Camcorder

Remote Control (SCL860/L870 only)

Description of Buttons

1.Start/Stop (see page 27)

2.Self Timer

3.Still (see page 59)

4.WIDE (see page 34)

5.TELE (see page 34)

6.Display (see page 16)

7. (Play) (see page 58)

8. (FF) (see page 59)

9. (REW) (see page 59)

10. (Stop) (see page 58)

11.Counter Reset (see page 59)

12.Zero Return (see page 59)

			3
6					11
	START/	DISPLAY	COUNTER	WIDE
1	STOP		RESET		4
	SELF		ZERO
2	TIMER	STILL RETURN			5
				TELE
8					12
9
7					10

Remote Control Battery Installation

You must insert or replace this battery when: - You purchase the camcorder.

- The remote control doesn’t work.

Insert Lithium Battery, following the + and - markings.

Be careful not to reverse the polarity of the battery.

Self Timer Recording

The Self Timer function on the remote control allows you to start and stop recording automatically.

Example: recording yourself

Two options are available

-WAIT-10S/SELF-30S: wait 10 seconds, followed by 30 seconds of recording.

-WAIT-10S/SELF-END: wait 10 seconds, followed by recording until you press the START/STOP button again.

19

ENGLISH

Preparing

1. Set power switch to CAMERA mode.

1

CAMERA

2.Press Self Timer button until the appropriate indicator is displayed on the LCD:

WAIT-10S/SELF-30S

WAIT-10S/SELF-END

2

WAIT-10S

SELF-30S

3.Press START/STOP button to start the timer.

:After waiting for 10 seconds, recording starts.

:If you have selected SELF-30S, recording stops automatically after 30 seconds.

:If you have selected SELF-END, press START/STOP again when you wish to stop recording.

Note: When recording with the timer, you can press START/STOP

Adjusting the Hand Strap and Shoulder Strap

Hand Strap

It is very important to adjust the hand strap for better

The hand strap enables you to:

-Hold the camcorder in a stable, comfortable position.

-Press the Zoom and the red Record button without having to change the position of your hand.

1.Pull open the Hand Strap cover and release the Hand Strap, adjust its length and stick it back onto the Hand Strap cover.

2.Close the Hand Strap cover back up again.

20

ENGLISH

Preparing

Shoulder Strap

The Shoulder Strap allows you to carry your camcorder with complete safety.

1. Insert each end of the strap into the hooks on the camcorder. 2. Put the end of each strap through the buckle, adjust the length

of the strap, then pull it tight in the buckle .

Lithium Battery Installation

	The lithium battery maintains the clock function, title and preset	pack or
	AC power adapter is removed.
	The lithium battery for the camcorder lasts about 8~10 months	.
	When the lithium battery becomes weak or dead, the date/time	you set
	the power switch to CAMERA.
	When this occurs, replace the lithium battery with type CR2025.
1.	Take out the holder from the lithium battery compartment.
2.	Insert the side of the lithium
	of the holder.
3.	Reinsert the holder into the lithium

Note: If the holder is inserted in the it will not fit correctly.

Warning: Keep the LITHIUM the children.

Should the battery be swallowed, consult a doctor immediately.

21

ENGLISH

Preparing

Connecting the Power Source

There are two ways to connect power source.

-Using the AC Power Adapter : used for indoor recording.

-Using the Battery Pack: used for outdoor recording.

To use the AC Power Adapter

2

1

CAMERA

3

regional conditions.

mode.

LCD monitor.

more than 30 degrees.

.

22

ENGLISH

Preparing

To use the Battery Pack

How long will the battery last for recording?

Depends on how often zoom is used in recording. Prepare as many battery packs as possible.

Recharging the Battery Pack

1. Attach the battery pack to the camcorder.

1

2.	Connect the AC Power Adapter to the AC cord	2	3
	and connect the AC cord to a wall socket.
3.	Connect the DC cable to the DC jack of the camcorder.

4. Turn off the camcorder power, and the recharging indicator will start blinking and begin recharging.

- Blinking once a second : Indicates less than OFF 50% has been charged.

- Blinking twice a second : Indicates 50% ~ 75% has been recharged.

-Blinking three times a second : Indicates 75% ~ 100% has

-Blinking stops and stays on : Recharging has been completed

-On for a second and off for a second: Indicates there is an

5.If recharging is completed, separate the camcorder, AC powerEven if the power is turned off, battery will be discharged.

Note: Battery pack may be charged a little at the time of purchase.

23