Please read this manual before operating your phone, and keep it for
future reference.
BMC_r561_UG_EN_03272009_D7
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating thereto (the
“Phone System”), is proprietary to Samsung and protected under federal laws,
provincial laws, and international treaty provisions. Intellectual Property includes,
but is not limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured
by the Intellectual Property. Moreover, you agree that you will not (and will not
attempt to) modify, prepare derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code from the software. No title
to or ownership in the Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark of RSA Security, Inc.
Post-it® is a registered Trademark of Minnesota Mining and Manufacturing
Company aka 3M CORPORATION DELAWARE.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any
use of such marks by Samsung Electronics Canada, Inc. is under license. Other
trademarks and trade names are those of their respective owners.
Disclaimer of Warranties; Exclusion of Liability
Except as set forth in the express warranty contained on the warranty page
enclosed with the product, the purchaser takes the product "as is", and Samsung
makes no express or implied warranty of any kind whatsoever with respect to the
product, including but not limited to the merchantability of the product or its
fitness for any particular purpose or use; the design, condition or quality of the
product; the performance of the product; the workmanship of the product or the
components contained therein; or compliance of the product with the
requirements of any law, rule, specification or contract pertaining thereto. Nothing
contained in the instruction manual shall be construed to create an express or
implied warranty of any kind whatsoever with respect to the product. In addition,
Samsung shall not be liable for any damages of any kind resulting from the
purchase or use of the product or arising from the breach of the express warranty,
including incidental, special or consequential damages, or loss of anticipated
profits or benefits.
Privacy
The privacy and copyright laws of Canada govern the disclosure, reproduction and
distribution of data, media and other content, including music and video content.
Certain activities, including downloads or transfer by any means (including, via
cable, Bluetooth® or otherwise) of such content may be an infringement of
privacy or copyright law. Neither Samsung Electronics Canada Inc. nor any of its
affiliates shall be liable or responsible for any data or content disclosed,
reproduced, downloaded or distributed by the user of this equipment.
Warning
Depending on the user interface used in the handset, you may experience slow
keypad response when performing tasks in the background. This can impact
making phone calls. When there is no activity or change in the icons at the top of
the main LCD display, the handset will resume normal operations.
Table of Contents
Getting Started ................................................................................... 1
Index .............................................................................................. 118
Getting Started
2. Volume Keys
1. Front LCD
16. Camera/
Camcorder Key
11. Power/Accessory
Connector
7. microSDTM Card Slot
10. Hole
12. Navigation Keys/Wheel Key
3. Menu/OK Key
9. Headset Jack
4. Left Softkey
6. TALK Key
8. Alpha-numeric Keypad
5. Music Store
13. Right Softkey
14. Clear/BACK Key
15. END Key
17. Microphone
Closed View of Phone
1 Getting Started
1. Front LCD: The Front LCD shows signal and battery strength, time, day,
and date. It also displays incoming calls or messages.
2. Volume Keys: Allows you to adjust the ringer volume in idle mode
(with the phone open) or adjust the voice volume during a call. To
mute the ringer during an incoming call, press the volume key up or
down.
3. Menu/OK Key: Pressing when navigating through a menu accepts the
highlighted choice in a menu.
4. Left Softkey: This key is used to navigate through menus and
applications by selecting the choice available in the Left Softkey
Option.
5. Music Store: This key is used to launch the Music Store application.
6. TALK Key: Allows you to place or receive a call. In idle mode, press the
key once to access the recent call log.
7. microSD™ Card Slot: This expansion slot allows you to insert a
microSD™ memory card to add additional memory and storage
capacity.
8. Alpha-numeric Keypad: Use these keys to enter numbers, letters, and
characters.
9. Headset Jack: Allows you to plug in an optional headset for safe,
convenient conversations.
10. Hole: The Hole is used to hang an accessory, such as a keychain.
11. Power/Accessory Connector: The power/accessory interface connector
is used to plug in the charging accessories and also connect any
available accessory cables to your phone.
12. Navigation Keys/Wheel Key: Allows you to scroll through the phone
menu options and provides a shortcut to phone functions from standby
mode.
13. Right Softkey: This key is used to navigate menus and applications by
selecting the choice available in the Right Softkey Option.
14. Clear/BACK Key: Deletes characters from the display when you are in
text entry mode. Press to return to the previous menu or screen when
navigating features on your phone.
Getting Started
Getting Started 2
15. END Key: Ends a call. If you press and hold the END key, the power goes
On or Off. When you receive an incoming call, press to ignore the call
and send the call to voicemail.
16. Camera/Camcorder Key: This key is used to launch the integrated
digital camera.
17. Microphone: The Microphone allows the other caller to hear you clearly
when you are speaking to them.
Viewing the Display Screen
The following list identifies the icons you’ll see on your phone’s display screens:
indicates that your 1X connection is active. Incoming voice calls go
directly to Voicemail; outgoing voice calls can be made, but the
connection will terminate.
indicates that data is being transferred over the 1X network. The arrow
direction indicates whether the handset is sending or receiving data.
indicates that your 1X connection is dormant.
indicates that the EV-DO connection is dormant.
indicates that you have an active EV-DO connection. When the arrows are
moving, data is being transferred over the EV-DO network.
indicates that position location is active.
indicates that position location is inactive.
indicates that your phone is in web security mode.
indicates that your phone is roaming.
indicates that a that Memory Card is inserted.
indicates that you missed a call.
indicates that you have a missed picture message.
indicates that you have a missed text message.
indicates that you have a missed voice mail.
3 Getting Started
indicates that you have missed scheduler.
indicates that you have a missed alarm.
indicates that you have a new message.
indicates that the message is locked.
indicates that the TTY option is On.
indicates that your phone is in vibrate all mode.
indicates that your phone is set to ringer plus vibrate mode.
indicates that the ringer is set to 1-Beep.
indicates that the phone is set to 1-Beep plus vibrate mode.
indicates that the ringer is turned on.
indicates that the ringer is turned off and the vibrate option is enabled.
indicates that the ringer is turned off.
indicates that the phone is set to Silence.
indicates that an alarm is set on your phone.
tells you a call is in progress.
means there is no service, as your phone cannot find a signal.
Getting Started
displays your current signal strength. When you are receiving maximum
signal strength, six bars are shown.
displays your current battery strength.
displays your current battery strength at empty.
Getting Started 4
indicates that the handset is in Mute mode.
indicates that the handset is in Key Mute mode.
indicates that the handset is in Speaker mode.
indicates that the handset is in Whisper mode.
indicates that the Camera is enabled.
indicates that the Camcorder is enabled.
indicates that the self-timer function is enabled. With the self timer
enabled, a set amount of time is required prior to taking a picture.
indicates that the white balance has been set to Sunny. This is used for
taking pictures outdoors on bright sunny days.
indicates that the white balance has been set to Cloudy. This is used for
taking pictures outdoors under cloudy conditions.
indicates that the white balance has been set to Tungsten. This is used for
taking pictures indoors under normal lighting conditions.
indicates that the white balance has been set to Fluorescent. This is used
for taking pictures indoors under fluorescent lighting conditions.
indicates that the white balance has been set to Manual. This is used for
taking pictures indoors or outdoors using your own custom settings.
indicates that a voice memo or video is being recorded.
indicates the key you must press to pause playback.
indicates the key you must press to play.
indicates that media has been uploaded to an online album or folder.
indicates that media is pending upload to an online album or folder.
indicates that there is a voice caption attached to an image.
indicates that Bluetooth technology is enabled.
5 Getting Started
indicates that Bluetooth technology is connected.
indicates that Bluetooth technology is active and hidden.
Your phone can also display a handy glossary of icons:
1. Press , select the Phone Support menu, and press .
2. Select Phone Info.
3. Select Icon Glossary.
4. Use the navigation keys to scroll through the list of icons.
Turning Your Phone On and Off
To turn your phone on:
• Press and hold to turn your phone on.
Once your phone is On, it displays “Looking for Service” which indicates that your
phone is searching for a signal. When your phone finds a signal, it automatically
enters standby mode – the phone’s idle state. At this point, you are ready to begin
making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. When a signal is found, your phone automatically
returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your
intervention. You can also initiate a search for service by pressing any key (when
your phone is turned On).
Tip: The Power Save feature helps to conserve your battery power when you are in
an area where there is no signal.
Getting Started
To turn your phone off:
• Press for two or more seconds until you see the powering down
animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is charging).
Getting Started 6
Using Your Phone’s Battery and Charger
Battery Capacity
Your phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge
your battery before it is fully drained.
When the battery runs low, the battery icon will blink to remind you to recharge the
battery. When the battery capacity is close to completely drained, the phone
sounds an audible alert and then powers down.
Note: Long backlight settings, low signal strength, searching for service, vibrate
mode, playing games, or browser use affect the battery’s talk and standby times.
Tip: Be sure to watch your phone’s battery level indicator and charge the battery
before it runs out of power.
7 Getting Started
Installing the Battery
To install the LiIon battery:
1. Press the top of the battery cover and slide the battery cover in the
direction of the arrow to release it. Lift the cover up by the bottom
corners to remove it.
2. Insert the bottom end of the battery into the phone housing by using the
direction of the arrow printed on the battery. The gold contacts on the
bottom of the battery should match up with those on the phone.
3. Push the top end of the battery down until it snaps into place.
Getting Started
Getting Started 8
4. Insert the top end of the battery cover into the grooves of the phone.
Snap the lid into place.
Removing the Battery
Note: Make sure the power is off so that you don’t lose any stored numbers or
messages.
To remove your battery:
• Use your finger to lift the battery (top end first) up and away from the
phone.
Charging the Battery
Your phone’s LiIon battery is rechargeable and should be charged as soon as
possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level becomes
too low, your phone automatically turns off and you will lose all the information
you were just working on. For a quick check of your phone’s battery level, glance at
the battery charge indicator located in the upper-right corner of either of your
phone’s display screens. indicates that the battery is full. If the battery
charge is getting too low, the battery icon blinks and the phone sounds a
warning tone.
Always use a Samsung-approved desktop charger, travel adapter, or vehicle power
adapter to charge your battery.
9 Getting Started
WARNING! FOR CONNECTION TO AN ELECTRICAL SUPPLY NOT LOCATED IN
Incorrect
Correct
NORTH AMERICA, YOU MUST USE AN ADAPTER OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. USE OF THE WRONG ADAPTER
COULD DAMAGE YOUR PHONE AND VOID YOUR WARRANTY. IMPORTANT
SAFETY INSTRUCTIONS - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS. THIS POWER UNIT IS INTENDED
TO BE CORRECTLY ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
Note: You must unplug the adapter before removing the battery from the phone
during charging to avoid damage.
Using the Travel Adapter
1. Locate the interface connector on the side of the phone and pull out and
turn the plastic cover.
2. Plug the terminal end of the adapter into the phone’s interface
connector, orienting the adapter’s gold contact pin upward.
Getting Started
3. Plug the other end into an electrical outlet.
Getting Started 10
4. An animated battery icon is displayed on the main screen. The icon
provides an indication of whether the battery is being charged or is fully
charged.
Note: It takes approximately 4 hours to fully recharge a completely drained
standard battery. With the Samsung approved LiIon battery, you can recharge the
battery before it drains completely.
Using a microSD Memory Card in Your Phone
Your phone is capable of supporting a memory storage media known as a
microSDTM memory card. This card is the newest standard of flash memory
specifically designed for use with ultra-small mobile phones and other devices. It is
ideal for storing media-rich files such as music, videos, and photographs in your
phone.
The maximum storage size for this media card is 8 GB.
Note: Compatibility with all high capacity microSDTM memory cards is not
guaranteed.
Installing the microSDTM Memory Card
Your phone has a memory card slot on the lower left side. You can install a
microSDTM card to provide additional memory for storing files (such as sound files
and photos) in your phone.
To install the card:
1. Locate the memory slot on the left side of the phone and pull out and
turn the plastic cover.
2. Insert the microSD
pointing toward the phone—into the memory card slot.
3. Carefully insert the microSD
in until you hear a click, which indicates that the card is now securely
installed.
TM
card—pin side facing you and smaller end
TM
card into the opening and firmly push it
11 Getting Started
Note: To remove the card once it has been inserted, firmly push the end of the
card further into the phone and release—the card should pop out of the memory
card slot. If this does not work, repeat the process again.
4. With the card now securely installed, resecure the plastic cover over
the microSD slot on the phone.
Getting Started
Getting Started 12
Phone Basics
Your handset supports a flexible user interface that allows you to modify the user
interface via downloadable themes. The availability of a custom user interface is
subject to your carrier. The following description of the basic capabilities of the
phone is a general description and not specific to a particular user interface.
However, there are some general principles that govern the handset's user
interface. For each user interface, there will be a mechanism to access a main
menu that provides access and control for most of the phone's capability.
Accessing Menus
1. Select the user interface's main focus button or press to activate the
main menu.
2. Select menu items by highlighting them with the navigation key and
pressing .
Displaying Your Phone Number
1. Press , highlight the Phone Support menu, and press .
2. Select Phone Info.
3. Select Phone Number.
Making and Answering Calls
To make a call:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while dialing, press
to erase one digit at a time. Press and hold to erase the entire
number.)
3. Press to call.
4. Press when you are finished.
Tip: To redial your last recent call, press twice.
13 Phone Basics
Tip: Some networks support + dialing. + dialing automatically indicates to the
network that you are dialing an international call and adds the international dialing
prefix (typically ‘011’) to the call automatically. To use + dialing, press and hold
the 0 key (until the + appears) before entering the phone number.
To answer an incoming call:
1. Make sure your phone is on. (If your phone is off, incoming calls go to
Voicemail.)
2. Press .
Your phone notifies you of incoming calls in the following ways:
• The phone rings or vibrates (unless set to Silence All).
• The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the Contacts entry’s
name is displayed. The caller’s phone number may also be displayed, if available.
The following options are also available to handle an incoming call:
• Press or the volume key on the side of the phone to quiet the ringer.
• Press the right softkey for Ignore or press and hold the volume key to
send the incoming call to your Voicemail box immediately.
To disconnect a call when you are finished:
• Press .
Missed Call Notification
When an incoming call is not answered, a Missed Call message is displayed on
your screen.
To dial a missed call back press .
Calling Emergency Numbers
You can place calls to 911 (dial 911 and press ), even if your phone is locked
or your account is restricted.
Phone Basics
Warning: After initiating a 911 call, you must end the call by pressing * and # on
your keypad. This notifies the phone that the 911 call was terminated intentionally
by the user. No other calls can be made prior to terminating the emergency call.
Phone Basics 14
In-Call Options
During a call, use the left softkey to Mute or UnMute your phone’s
microphone. Additional actions are available by pressing the right softkey for
Options during a call. (To select an option, press the corresponding keypad
number or highlight the option and press .)
• (1) Speaker On or Speaker Off allows you to activate or deactivate the
speakerphone.
• (2) Save allows you to save the new number in your Contacts.
• (3) 3-Way Call allows you to talk to two different people at the same time.
(For more information, see "Making a Three-Way Call" on page 19.)
• (4) Contacts accesses the Contacts menu options.
• (5) Voice Memo allows you to record the current conversation. (For more
information on recording a voice memo, see "Voice Memo" on page 79.)
• (6) Phone Info displays the phone number, icon glossary, the hardware/
software version, and advanced information.
• (7) Key Mute or Key Unmute allows you to mute the key tones on your
phone so the other caller cannot hear you pressing any keys on your phone.
• (8) Messaging allows you to check notifications and access the contents of
voice or text messages.
• (9) Recent History checks your call log for Missed, Outgoing, Incoming and
Recent calls. You can also erase the logs from this menu.
• (0) Tools accesses the Tools menu options.
• (*) Whisper On or Whisper Off allows you to whisper (such as when you are
in a public area) and your voice will be amplified so that the other caller can
hear you.
WARNING: Because of higher volume levels, do not place the device near your ear
during speakerphone use.
End-of-Call Options
After receiving a call from or making a call to a phone number that is not in your
Contacts, the phone number and the duration of the call are displayed. Press the
right softkey for Options and then press Save to save the new number in your
Contacts. (See "Saving a Phone Number" on page 16” below for more information.)
15 Phone Basics
Note: The End-of-Call options are not displayed for calls identified as Unknown ID
or Restricted Number.
Saving a Phone Number
You can store up to 600 phone numbers in the Contacts list. (For more
information, see "Adding a New Contact" on page 60.)
1. Enter a phone number from standby mode.
2. Press the right softkey for Options.
3. Select Save.
4. Select New Entry and press .
Note: Step 4 does not appear when your Contacts list is empty.
5. Select the Type using the navigation key and press .
• Mobile• Home• Work
• Pager• Fax• Others
6. Enter the name using the keypad and press .
7. Press the left softkey for Done.
Finding a Phone Number
From the Idle screen, press the right softkey for Contacts.
1.
2. Scroll down through your list of contacts to highlight the name and
press to make the call.
Tip: To search through your list more quickly, enter the first few letters in the Name
box. The display will move down the list to the first entry that matches the text in
the Name box.
Phone Basics
Tip: If the entry contains more than one phone number, scroll left or right to display
the number you wish to call and press to make the call.
Phone Basics 16
Dialing and Saving Phone Numbers With Pauses
You can dial or save phone numbers with pauses for use with automated systems,
such as Voicemail or credit card billing numbers.
There are two types of pauses available on your phone:
• Hard Pause sends the next set of numbers when you press .
• 2-Second Pause automatically sends the next set of numbers after two
seconds.
Note: You can have multiple pauses in a phone number and combine 2-second and
hard pauses.
To dial or save phone numbers with pauses:
1. Enter a phone number from standby mode.
2. Press the right softkey for Options and select Hard Pause or 2sec
Pause. Hard pauses are displayed as a “P” and 2-second pauses as a
“T”.
3. Enter additional numbers.
4. Press to dial the number.
— or—
Press the right softkey for Options and select Save to save the
number in your Contacts.
When dialing a number with a hard pause, press to send the next set of
numbers.
Abbreviated Dial
Abbreviated dialing allows you to program a five or six digit prefix for commonly
used phone numbers. When abbreviated dialing is on, you can enter the last four or
five digits of any phone number that matches the five or six digit prefix, and the
number is dialed.
To set up abbreviated dialing:
1. Press , highlight the Settings menu, and press .
2. Select More....
3. Select Call Setup.
4. Select Abbreviated Dial.
17 Phone Basics
5. Select On and press .
6. Input the five or six digit prefix (for example, area code and prefix) and
press .
Making an Abbreviated Dial Call
1. Enter the last four or five digits of the phone number. Abbrev. Dial is
displayed in the lower left corner with the prefix digits displayed.
Note: If there is more than one Contact entry that matches the last four or five
digits, a list is displayed which allows you to select the desired number to call.
2. Press to make the call.
Using Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory to make
contacting friends and family as easy as pressing a few buttons. With this feature,
you can dial Speed Dial entries using one key press for locations 2-9, or two key
presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 2-9:
• Press and hold the appropriate key for approximately two seconds.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds.
Using Caller ID
To block your phone number from being displayed for a specific outgoing call:
1. Dial *67 on your keypad.
2. Enter the number you want to call.
3. Press .
Phone Basics
To permanently block your number, call the Customer Service department of your
network service provider.
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you of incoming calls by sounding two
beeps. Your phone’s screen informs you that another call is coming in and displays
the caller’s phone number (if it is available and you are in digital mode).
Phone Basics 18
To respond to an incoming call while you’re on a call:
• Press . (This puts the first caller on hold and answers the second call.)
To switch back to the first caller:
• Press again.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same time. When using
this feature, the normal airtime rates will be charged for each of the two calls.
To make a Three-Way Call:
1. Enter a number you wish to call and press .
2. Once you have established the connection, press the right softkey
for Options and select 3-way Call.
3. Select Contacts, Recent History, or Enter Phone # to dial the second
number and press .
4. When you’re connected to the second party, press again to begin
your three-way call.
If one of the people you called hangs up during your call, you and the remaining
caller stay connected. If you initiated the call and are the first to hang up, all three
callers are disconnected.
Tip: You can also begin a Three-Way Call by displaying a phone number stored in
your Contacts, Recent History, or Messaging. To call the third party, press .
TTY Use With Handset
A TTY (also known as a TDD or Text Telephone), is a telecommunications device
that allows people who are deaf or hard of hearing, or who have speech or
language disabilities, to communicate by telephone.
19 Phone Basics
Your phone is compatible with selected TTY devices. Please check with the
manufacturer of your TTY device to ensure that it supports digital wireless
transmission. Your phone and TTY device will connect via a special cable that
plugs into your phone's headset jack. If this cable was not provided with your TTY
device, contact your TTY device manufacturer to purchase the connector cable.
Note: Not all service providers support TTY. Consult your service provider for
more information.
To turn TTY Mode on or off:
1. Activate the main menu, highlight the Settings menu, and press .
2. Select More....
3. Select Accessibility.
4. Select TTY Options. (A brief explanation of TTY will display.)
5. Press again to continue.
6. Press the navigation key up or down to select TTY On or TTY Off and
press to save and exit.
Note: In TTY Mode when your headset is plugged in, your phone will display the
TTY access icon. If TTY mode is enabled, the headset cannot be used.
IMPORTANT 911 Emergency Calling: We recommend that TTY users make
emergency calls by other means, including Telecommunications Relay Services
(TRS), analog cellular, and land line communications. Wireless TTY calls to 911
may be corrupted when received by public safety answering points (PSAPs)
rendering some communications unintelligible. The problem encountered appears
related to TTY equipment or software used by PSAPs. The wireless industry and
PSAP community are currently working to resolve this.
Phone Basics
Phone Basics 20
Entering Text
To change the character input mode:
1. When you display a screen where you can enter text, press the right
softkey for Options then select Text Mode.
2. Select a character input mode:
• T9 (English): To enter characters using predictive T9 Text Input (see
page 21).
• Alpha: To enter characters by tapping the keypad (see page 22).
• Symbols: To enter symbols (see page 22).
• Number: To enter numbers (see page 22).
• Emoticons: To enter emoticon symbols.
• Text Options: To customize your character input mode.
T9 Text Input
T9 Text Input analyzes the letters you enter using an intuitive word database and
creates a suitable word. (The word may change as you type.) Other possible words
appear in a list below your text.
• To choose a word displayed in the list, scroll up and down using the up and
down navigation keys.
• To accept a word, press .
• To accept a word and insert a space, press the key.
• Press to erase a single character. Press and hold to delete an entire
entry.
• To enter a period, press . To enter other special characters, press
and then repeatedly press to cycle through other special
characters until the desired character is displayed. If the desired character
does not display, press the right softkey for Options, select Text Mode, and then select Symbols.
• To insert a number, press and hold the corresponding number key.
To enter text using T9:
1. From the text entry screen (for example, a new event in scheduler),
press the right softkey for Options, select Text Mode, and then
select T9 (English).
2. Use your keypad to enter the new event.
21 Entering Text
Alpha Mode
To enter characters by tapping the keypad, select the Alpha mode. Press the
corresponding key repeatedly until the desired character appears.
Use the key to switch between uppercase, lowercase, and mixed case.
To enter text using Alpha:
1. From a text entry screen, press the right softkey for Options,
select Text Mode, and then select Alpha.
2. Use your keypad to enter the contact's name. Characters scroll in the
following order:
. , @ 1 ? ! * # / P Q R S p q r s 7
A B C a b c 2 T U V t u v 8
D E F d e f 3 W X Y Z w x y z 9
G H I g h i 4 0
J K L j k l 5 Space
M N O m n o 6 Change case
After a character is entered, the cursor automatically advances to the next space
after two seconds or when you enter a character on a different key.
Note: When the Dual Language text option is enabled, accented characters are also
displayed.
Numbers, Symbols, Emoticons and Preset Messages
See "To change the character input mode:" on page 21 to enter the following types
of input.
To enter symbols:
• Select the Symbols mode. To enter a symbol, press the corresponding
number key indicated on the display. Use the navigation keys to scroll up or
down to see additional symbols.
To enter numbers:
• Select the Number mode and press the appropriate key.
Entering Text
Entering Text 22
To enter “emoticons” (smileys):
• Select the Emoticons mode. To enter an emoticon, press the
corresponding number key indicated on the display. Use the navigation
keys to scroll up or down to see additional emoticons. Emoticons are also
referred to as “smileys”, which are icons that express an emotion through a
facial expression.
To enter preset messages:
1. Press the right softkey for Options then select Add Preset
Message.
2. Scroll to the desired pre-programmed message and press .
• For more information on preset messages, see "Quick Messages" on page
54.
23 Entering Text
Loading...
+ 97 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.