Page 1
4. NAM Programming
4-1 General Setup
LCD Display Key in Function
47 869#08#9 -selects NAM programming
NAM Program
1:General
2:Setup NAM1
ESN
B0000000
CAI version
3
VOC 13K/8K
SO_VOICE_13K
SCM
01101010
Lock Code
0000
Slot Mode
Yes
1 -choose 'GENERAL.'
Volume Electronic Serial Number of the phone.
Volume
or Vocoder data rate.
OK
Volume Station Class Mark displays the power class (bit 0~1),
4-digit code Four-digit number supplied by the user which enables
OK electronic locking of the phone.
or Enables slot mode.
OK
The version of the Common Air Interface supported by the mobile.
transmission (bit2), slotted (bit5), dual mode (bit6).
Slot Index
2
Pref NAM(1~4)...
Digital pref
Samsung Electronics - Contents may change without notice. 4-1
0 - 7 Specifies the duration and frequency of times that the mobile
OK checks the paging channel. The higher the value, the less often the
or Up to four NAMs are allowed for the phone. This lists one of the
OK four NAMs and allows you to program both the FM and CDMA
Slot mode index.
mobile looks at the paging channel, and the more power is saved.
Preferred system selection for NAM(1~4).
settings.
Page 2
NAM Programming
Enables you to specify up to six SIDs that the phone is prohibited
OK from acquiring in analog mode. If you enter ‘0’ for any SID, the
program assumes that you have no more numbers to store. The
user may be denied service when operating within the service
areas of these systems.
Default setting is 0: ranges from 0 to 32,767: up to six SIDs.
NAM Program
1:General
2:Setup NAM1
Setup NAM1
1:Phone #
2:FM
3:CDMA
Phone #
1234567890
Mobile ID #
1234567890
Setup NAM1
1:Phone #
2:FM
3:CDMA
FM Home SID
20
FM 1st Chn
334
FM Acq SID (1~6)
20
FM LockSID (1~6)
0
4-2 Setting Up NAM1
LCD Display Key in Function
2 -choose 'Setup NAM1.'
1 -choose 'Phone #'.
phone number Phone number.
OK
mobile ID number Mobile ID number.
OK
2 -choose 'FM.'
FM Home System ID.
ID number The Identification of the cellular system in which the mobile
OK station subscribes for service.
Cellular Service provider.
1st Paging Channel.
channel number Suggested setting is 333 for the A carrier, 334 for the B carrier:
OK ranges from 313 to 333 for A and 334 to 354 for B.
Primary analog paging channel: setting depends on whether
the service is provided by the A carrier or the B carrier.
FM Acquisition System ID.
ID number Enables you to set the phone to acquire up to six SIDs in the
OK analog mode. If you enter ‘0’ for any SID, the program
assumes that you have no more numbers to store.
Default setting is 0: ranges from 0 to 32,767: up to six SIDs.
FM Lock System ID.
ID number
4-2 Samsung Electronics - Contents may change without notice.
Page 3
LCD Display Key in Function
NAM Programming
Auto Reg
Yes
FM pref...
B pref
FM ACCOLC
Setup NAM1
1:Phone #
2:FM
3:CDMA
IMSI MCC
000
IMSI MNC
00
CDMA pref...
B pref
or Enables autonomous registration.
OK
or Preferred system selection.
OK
FM Access Overload Class.
0
or This two-digit number specifies the level of priority assigned
OK to the mobile for accessing the system.
Ranges from 0 to 15.
3 -choose 'CDMA.'
number International Mobile Station Identity Mobile Country Code.
OK
number International Mobile Station Identity Mobile Network Code.
OK
or Preferred system selection.
OK
CDMA ACCOLC
Pchn Sys A
283
Pchn Sys B
384
Schn Sys A
691
Schn Sys B
777
CDMA Access Overload Class.
0
class number This two-digit number specifies the level of priority assigned
OK to the mobile for accessing the system.
Ranges from 0 to 15.
channel number Primary CDMA channel for the A carrier.
OK Ranges from 0 to 1,023. 0 indicates no channel.
channel number Primary CDMA channel for the B carrier.
OK Ranges from 0 to 1,023. 0 indicates no channel.
channel number Secondary CDMA channel for the A carrier.
OK Suggested setting is 0: ranges from 0 to 1,023.
channel number Secondary CDMA channel for the B carrier.
OK Suggested setting is 0: ranges from 0 to 1,023.
Samsung Electronics - Contents may change without notice. 4-3
Page 4
NAM Programming
LCD Display Key in Function
CD Acq SID
(1-6)
20
CD lockSID
(1-6)
0
CDMA HomeSID
Yes
CDMA fSID
Yes
CDMA Acquisition System ID.
ID number Enables you to set the phone to acquire up to six SIDs in the
OK CDMA mode. If you enter ‘0’ for any SID, the program
assumes that you have no more numbers to store.
Default setting is 0: ranges from 0 to 32,767: up to six SIDs.
CDMA Lock System ID.
ID number Enable you to specify up to six SIDs that the phone will be
OK prohibited from acquiring in CDMA mode. If all six SIDs are
set to zero, no lock restrictions will be in effect and the phone
can acquire all SIDs.
Default setting is 0: ranges from 0 to 32,767 up to six SIDs.
CDMA Home System ID.
or Enables the phone to allow mobile terminated calls while in
OK the home system. Controls the types of registration allowed for
the phone.
CDMA foreign SID, current status is displayed.
or changes the status.
OK stores it.
CDMA fNID
Yes
SID #1
20
NID #1
65535
CDMA foreign NID, current status is displayed.
or changes the system.
OK stores it.
first SID written in the list, current status is displayed.
number to change, enter new one.
OK stores it.
first NID written in the list, current status is displayed.
number to change, enter new one.
OK stores it.
4-4 Samsung Electronics - Contents may change without notice.
Page 5
4-3 Quick NAM Programming
LCD Display Key in Function
Menu, 4, 0 Select Quick NAM Programming
NAM Programming
Enter Lock
NAM Program
1:Setup NAM1
2:Setup NAM2
Phone #
1234567890
Mobile ID #
1234567890
SID
20
626 Enter Lock Code.
1 Choose “NAM1”
Phone Number Phone Number.
OK
Mobile ID Number Mobile ID Number.
OK
Number System ID Number.
OK
Samsung Electronics - Contents may change without notice. 4-5
Page 6
NAM Programming
4-6
Samsung Electronics - Contents may change without notice.
Loading...