Thermal Night Vision Camera
User Manual |
SCB-9060 |
SCB-9080 |
|
|
|
Thermal Night Vision Camera
User Manual
Copyright
©2011 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
•If the system behaves abnormally because you run a program irrelevant to the system operation.
•Deteriorated performance or natural worn-out in process of time
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
■ SCB-9060/9080 SERIES
• NTSC MODEL |
• PAL MODEL |
SCB-9060/9080N |
SCB-9060/9080P |
■MODEL DESCRIPTION
• SCB-9060/9080X
SIGNAL SYSTEM
•SIGNAL SYSTEM
N → NTSC MODEL P → PAL MODEL
Safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
•To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
•To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
WARNING
1.Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could cause fire, electrical shock, or damage to the product.
2.Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to the product.
3.Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat generation or fire.
4.Securely plug the power cord into the power receptacle. insecure connection may cause fire.
5.When installing the camera, fasten it securely and firmly. The fall of camera may cause personal injury.
4_ Safety information
6. |
Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers |
|
|
|
filled with water on top of the camera. doing so may cause personal injury due to fire, |
|
|
|
electric shock, or falling objects. |
|
|
7. |
Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or |
|
|
|
electric shock. |
● |
|
|
|
||
|
|
|
|
8. |
If any unusual smells or smoke come from the unit, stop using the product. in such case, |
SAFETY |
|
|
|||
|
such a condition may cause fire or electric shock. |
|
|
|
immediately disconnect the power source and contact the service center. continued use in |
INFORMATION |
|
10.When cleaning, do not spray water directly onto parts of the product. doing so may cause |
|
||
9. |
If this product fails to operate normally, contact the nearest service center. never |
|
|
disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.)
fire or electric shock.
CAUTION
1.Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference.
2.Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity. Doing so may cause fire or electric shock.
3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.
4.Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or damage to the product.
5.Keep out of direct sunlight and heat radiation sources. It may cause fire.
6.Install it in a place with good ventilation.
7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.
8.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10.Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.
5
Safety information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
1)This device may not cause harmful interference, and
2)This device must accept any interference received including interference that may cause undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
6_ Safety information
Important safety instructions
1. |
Read these instructions. |
|
|
2. |
Keep these instructions. |
|
|
3. |
Heed all warnings. |
|
|
4. |
Follow all instructions. |
|
|
5. |
Do not use this apparatus near water. |
● |
|
|
|||
6. |
Clean only with dry cloth. |
SAFETY |
|
7. |
Do not block any ventilation openings. Install in accordance with the manufacturer’s |
|
|
|
instructions. |
|
|
8. |
Do not install near any heat sources such as radiators, heat registers, or other apparatus |
INFORMATION |
|
|
|
||
|
(including amplifiers) that produce heat. |
|
|
9. |
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug |
|
|
|
has two blades with one wider than the other. A grounding type plug has two blades and |
|
|
|
a third grounding prong. The wide blade or the third prong is provided for your safety. If |
|
|
|
the provided plug does not fit into your outlet, consult an electrician for replacement of the |
|
|
|
obsolete outlet. |
|
|
10.Protect the power cord from being walked on or pinched particularly at plugs, |
|
|
|
|
convenience receptacles, and the point where they exit from the apparatus. |
|
|
11.Only use attachments/accessories specified by the manufacturer. |
|
|
|
12.Use only with cart, stand, tripod, bracket, or table specified by the |
|
|
|
|
manufacturer, or sold with the apparatus. |
|
|
13.Unplug this apparatus when a card is used. Use caution when moving |
|
|
|
|
the cart/ apparatus combination to avoid injury from tip-over. |
|
|
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus |
|
|
|
|
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has |
|
|
|
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to |
|
|
|
rain or moisture, does not operate normally, or has been dropped. |
|
|
|
Apparatus shall not be exposed to dripping or splashing and no objects |
|
|
|
filled with liquids, such as vases, shall be placed on the apparatus |
|
|
|
Samsung Techwin cares for the environment at all product manufacturing |
|
|
|
stages to preserve the environment, and is taking a number of steps to provide |
|
|
|
customers with more environment-friendly products.The Eco mark represents |
|
|
|
Samsung Techwin’s will to create environment-friendly products, and indicates |
|
|
|
that the product satisfies the EU RoHS Directive. |
|
|
7
Contents
INTRODUCTION
9
INSTALLATION
15
SETUP
18
TROUBLESHOOTING
26
SPECIFICATIONS
27
9Features
9Cautions for Operating Temperature 10 What’s included
11 Component names and Functions
15 Inputting Power
15 Startup
15NUC(non uniformity correction)
16Monitor/Communications Connection
17Monitoring Guidelines
17Storage
18Menu Configuration
18 Function Settings Methods
26Troubleshooting
27Specifications
29Dimension
8_ Contents
Introduction
FEATURES
y Thermal Night Vision Camera
The SCB-9060/9080 Thermal Night Vision Camera is a contactless monitoring device |
|
|
capable of measuring the surface temperatures of all target areas, and displaying the |
|
|
resulting data via temperature distribution images (thermal images). |
|
|
Featured by the top-notch uncooled IR detector, the sensor does not require you to |
● |
|
Up to 380m of detection without lighting: SCB - 9060 |
INTRODUCTION |
|
prepare a separate cooling device or maintenance. In addition, its sensor boasts long |
|
|
wavelength sensitivity (detecting infrared radiation with wavelengths between 8-14 μm |
|
|
from targets and background), allowing it to produce high resolution thermal images with |
|
|
minimal impact from sunlight, even during outdoor daytime monitoring in clear weather. |
|
|
y Excellent Detection |
|
|
Up to 1.2km of detection without lighting: SCB - 9080 |
|
|
y Detection of over-specified temperature |
|
|
You can specify a specific temperature, over which you can instruct the camera to detect a target. |
|
|
y IFOV - Instantaneous Field of View (Spatial Resolution) |
|
|
Featured by a small high-performance IR sensor with 0.47mrad/1.68mrad of IFOV (Instantaneous |
|
|
Field of View), the product can implement recording a sharper and more precise image against |
|
|
other cameras in the same class. |
|
|
y Dustproof, waterproof (IP66 standard certified) |
|
|
With dustproof and waterproof design, it can be installed in an outdoor place exposed to dust and rain. |
|
|
y Communications |
|
|
Remote control of OSD menus is enabled via coaxial and RS-485 communication protocols. |
|
|
- Protocol: Pelco Coaxitron |
|
|
- RS-485 communication protocol: SAMSUNG-T, SAMSUNG-E, PELCO-D, PELCO-P, |
|
|
BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD |
|
|
yOSD
The camera control is convenient by using 19 different foreign language O.S.D.
-English, Korean, German, Spanish, Italian, Chinese, Russian, Polish, Japanese, French, Turkish, Czech, Portuguese, Rumanian, Serbian, Taiwanese, Danish, Swedish, Thai
CAUTIONS FOR OPERATING TEMPERATURE
1.The camera cannot operate properly at temperatures lower than -30°C.
2.Even if the surrounding temperature is -30°C or higher, the camera may not thaw itself and operate properly depending on the installation environment.
3.Keep in Stand by mode for at least 30 minutes. Once the internal temperature reaches -20°C or higher, the camera enters operation mode.
4.Always keep the power on, so the camera can maintain its internal temperature at -20°C or higher.
5.If the camera was turned on after being left at temperatures lower than -30°C for a long duration:
-If the internal temperature is lower than -20°C, the camera does not transmit video signals and displays a black screen along with the "WAIT UNTIL SHUT TEMP IS -20, INITIALIZING" message, instead of operating properly.
-If the internal temperature is higher than -20°C, the camera enters operation mode.
9
Introduction
WHAT’S INCLUDED
Check if the following items are included in the product package.
Thermal Night Vision Camera
|
SCB-9060 |
SCB-9080 |
SCB-9060/9080,
User Manual Set of Wrench (x3)
camera sun shield
Lens cap |
Bracket Screws (x2) |
Camera Holder Screws (x4) |
10_ Introduction