Samsung SCB-3020 User Manual

Compact High Resolution ATM Camera

User Manual

SCB-3020 SCB-2020

Compact High Resolution ATM Camera

User Manual

Tra dem ark

The name of t his product is the re gistered tradem ark of Samsung Techwin C o., Ltd. Other tr ademarks mentio ned in this manual are t he registered tra demark of their res pective company.

Restriction

Samsung Tech win Co., Ltd shall res erve the copyri ght of this document . Under no circumst ances, this docu ment shall be reprodu ced, distribute d or changed, par tially or wholly, wit hout formal autho rization of Sams ung Techwin.

Disclaimer

Samsung Tech win makes the best to v erify the integr ity and correc tness of the conte nts in this documen t, but no formal guarante e shall be provided . Use of this documen t and the subsequen t results shall be ent irely on the user’s ow n responsibilit y. Samsung Techwin reser ves the right to cha nge the contents o f this document wit hout prior notice .

Warra nty

If the pro duct does not oper ate properly in no rmal conditions , please let us know. S amsung Techwin will reso lve the problem fo r free of charge. Th e warranty peri od is 3 years. Howeve r, the follow ings are excluded:

If the sys tem behaves abnorm ally because you ru n a program irrelev ant to the system ope ration.

•

Deteriorated performance or natural worn-out in process of time

is the regis tered logo of Sams ung Techwin Co., Ltd.

Safety information

CAUTION

RISK OF ELECTRIC SHOCK.DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

•

MOISTURE.

TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/WALL IN

•

ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.

•

IF THIS POWER SUPPLY IS USED AT 240V AC, A SUITABLE PLUG ADAPTER SHOULD BE USED.

WARNING

BE SURE TO USE ONLY THE STANDARD ADAPTER THAT IS SPECIFIED IN THE SPECIFICATIO USING ANY OTHER ADAPTER COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE TO THE PRODUCT.

INCORRECTLY CONNECTING THE POWER SUPPLY OR REPLACING BATTERY MAY CAUSE EXPLOSION, FIRE, ELECTRIC SHOCK, OR DAMAGE TO THE PRODUCT.

N SHEET.

Safety information

DO NOT CONNECT MULTIPLE CAMERAS TO A SINGLE ADAPTER. EXCEEDING THE CAPACITY MAY CAUSE

3. ABNORMAL HEAT GENERATION OR FIRE.

SECURELY PLUG THE POWER CORD INTO THE POWER RECEPTACLE. INSECURE CONNECTION MAY CAUSE FIRE.

WHEN INSTALLING THE CAMERA, FASTEN IT SECURELY AND FIRMLY. THE FALL OF CAMERA MAY CAUSE

5. PERSONAL INJURY.

DO NOT PLACE CONDUCTIVE OBJECTS (E.G. SCREWDRIVERS, COINS, METAL PARTS, ETC.) OR CONTAINERS FILLED

6. WITH WATER ON TOP OF THE CAMERA. DOING SO MAY CAUSE PERSONAL INJURY DUE TO FIRE, ELECTRIC SHOCK, OR FALLING OBJECTS.

DO NOT INSTA

7. ELECTRIC SHOCK.

IF ANY UNUSUAL SMELLS OR SMOKE COME FROM THE UNIT, STOP USING THE PRODUCT. IN SUCH CASE,

8. IMMEDIATELY DISCONNECT THE POWER SOURCE AND CONTACT THE SERVICE CENTER. CONTINUED USE IN SUCH A CONDITION MAY CAUSE FIRE OR ELECTRIC SHOCK.

10.

4 – High Resolution Compact ATM Camera

LL THE UNIT IN HUMID, DUSTY, OR SOOTY LOCATIONS. DOING SO MAY CAUSE FIRE OR

IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE CENTER. NEVER DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG IS NOT LIABLE FOR PROBLEMS CAUSED BY UNAUTHORIZED MODIFICATIONS OR ATTEMPTED REPAIR.)

WHEN CLEANING, DO NOT SPRAY WATER DIRECTLY ONTO PARTS OF THE PRODUCT. DOING SO

MAY CAUSE FIRE OR ELECTRIC SHOCK.

Safety information

CAUTION

DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY

FROM A LOCATION SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE.

DO NOT INSTALL IN A LOCATION SUBJECT TO HIGH TEMPERATURE (OVER 50°), LOW

TEMPERATURE (BELOW -10°), OR HIGH HUMIDITY. DOING SO MAY CAUSE FIRE OR ELECTRIC SHOCK.

IF YOU WANT TO RELOCATE THE ALREADY INSTALLED PRODUCT, BE SURE TO TURN OFF THE POWER AND THEN MOVE OR REINSTALL IT.

REMOVE THE POWER PLUG FROM THE OUTLET WHEN THERE IS A LIGHTING STORM. NEGLECTING TO DO SO MAY CAUSE FIRE OR DAMAGE TO THE PRODUCT.

KEEP OUT OF DIRECT SUNLIGHT AND HEAT RADIATION SOURCES. IT MAY CAUSE FIRE.

INSTALL IT IN A PLACE WITH GOOD VENTILATION.

AVOID AIMING THE CAMERA DIRECTLY TOWARDS EXTREMELY BRIGHT OBJECTS SUCH AS SUN, AS THIS MAY DAMAGE THE CCD IMAGE SENSOR.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

THE MAINS PLUG IS USED AS A DISCONNECT DEVICE AND SHALL STAY READILY OPERABLE AT ANY TIME.

FCC STATEMENT

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :

1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

Safety information

THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Caution

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

IC COMPLIANCE NOTICE

THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE.-CAUSING EQUIPMENT REGULATIONS OF ICES-003.

6 – High Resolution Compact ATM Camera

Safety information

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus (including ampliﬁ ers) that

produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁ t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

10.

where they exit from the apparatus.

Only use attachments/accessories speciﬁ ed by the manufacturer.

11.

Use only with cart, stand, tripod, bracket, or table speciﬁ ed by the manufacturer, or sold with the

12.

apparatus.

Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination

13.

to avoid injury from tip-over.

Refer all servicing to qualiﬁ ed service personnel. Servicing is required when the apparatus has been damaged in any

14.

way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus

8 – High Resolution Compact ATM Camera

Contents

Introduction

Features .................................................. 10

PRODUCT & ACCESSORIES .................................................. 11

Part Names and Functions .................................................. 12

Installation

Connecting the Remote Controller .................................................. 15

Connecting to Monitor .................................................. 16

Connecting to Power .................................................. 16

How to use OSD Menu

Using Icons in the Menu .................................................. 17

Main Menu .................................................. 17

PROFILE .................................................. 18

Camera Setup .................................................. 22

INTELLIGENCE .................................................. 30

PRIVACY ZONE SETUP .................................................. 33

OTHER SET .................................................. 35

SYSTEM INFORMATION .................................................. 36

Speciﬁ cations

Speciﬁ cations .................................................. 37

Dimensions .................................................. 40

Introduction

Features

High Resolution

❖

High Resolution This camera has realized high resolution of 600 lines using the top-of the range full digital

•

image processing and special algorithm technologies.

❖

VPS(Virtual Progressive Scan)

This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality

•

recording and ﬁ le transfer via the Internet. ( For SCB-2020, the VPS option is not available.)

❖

Intelligent Motion Detection & Tracking

This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it

•

sounds an alert if an object passes / enters /exits the virtual fence or virtual area.

WDR

❖

WDR extends the contrast range as it takes a picture of each of dark and bright areas before compositing the

•

two, which is useful if you take a picture of windows inside a building. Namely, it improves the picture quality of the outdoor scenery as well as indoor. ( For SCB-2020, the WDR mode is not available.)

XDR (eXtended Dynamic Range)

❖

Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain

•

pixel unit to determine the optimal visibility.

High Sensitivity

❖

Adopted SONY Super-HAD PS CCD (SCB-3020)/Super-HAD IT CCD (SCB-2020) which enables super sensitive video

•

acquisition.

Low Illumination

❖

Low illumination feature enabled by the digital signal processing technology that allows recording in a lowest illumination where

•

nearly no light is received.

Superior Backlight Adjustment

❖

When an object has a bright illumination or sunlight behind it, this camera automatically improves the shaded

•

object picture quality.

10 – High Resolution Compact ATM Camera

Introduction

Digital Power Synchronization

❖

The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the

•

operationability and reliability of this camera.

❖

Random Trigger Function

Recording video while synchronized to a random trigger signal is available. (This feature is not supported by

•

SCB-2020.)

❖

Output Signal Setting

•

You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy, Horizontal/Vertical proﬁ ling, and digital zooming.

❖

Coaxial Cable Communication

•

This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the control signal. In installation or repair, this helps you control the communication controller (optional) without additional cabling.

PRODUCT & ACCESSORIES

Product & Accessories❖

Main Product

•

Accessories

•

High Resolution Compact ATM Camera

SCB-3020

User Manual

SCB-2020

Screw (2EA)8PIN Connector Cable Tie (1EA)

User Manual

Introduction

PART NAMES AND FUNCTIONS

Front❖

L-PULSE

GND

ALM.OUR

Lens 3.7mm (F2.0)

Bracket Used to ﬁ x the product on a wall or ceiling.

Video Out Outputs camera’s video signal, which is to be connected to a monitor’s Video In. The port can be

Power In Power cable is connected to this terminal.

L/L PULSE Clock port for LINE-LOCK control.

GND Grounding port.

ALM.OUT Alarm out port for camera’s alarm signal output.

12 – High Resolution Compact ATM Camera

used for menu control if connected with a controller.

q r s

Rear❖

2. KEY_E

3. G

1. EXT-IN

2. KEY_E

3. GND

4. DSPSTB

5. DSPSDI

6. DSPSDO

7. DSPSCK

8. FSPE

1. L/L PULSE

2. Alarm_out

3. GND

4. Video out

5. GND

6. V+12V

Port for camera’s ﬁ rmware update. For further details, refer to the below table:

NO Port Name Description

1 EXT-IN Input port for random trigger.

2 KEY-E Input port for multiplexed analog voltage key.

3 GND Grounding port for the board.

4 DSPSTB Selection port for JTAG upgrade chip.

5 DSPSDI Input port for JTAG upgrade data.

6 DSPSDO Output port for JTAG upgrade data.

7 DSPSCK Clock port for JTAG upgrade clock.

8 FSPE Selection port for JTAG upgrade mode.

Sample KET-E port’s external connection is



shown in the right.

1. EXT-IN

2. KEY_E

3. GND

4. DSPST

4. DSPSTB

5. DSPSDI

6. DSPSD

6. DSPSDO

7. DSPSCK

8. FSPE

Introduction

2. Ala

3. GND

4. Video out ou

6. V+12V

Rear❖

1. EXT-IN

2. KEY_E

3. GND

4. DSPSTB

5. DSPSDI

6. DSPSDO

7. DSPSCK

8. FSPE

1. L/L PULSE

2. Alarm_out

3. GND

4. Video out

5. GND

6. V+12V

Port for camera’s ﬁ rmware update. For further details, refer to the below table:

NO Port Name Description

1 L/L PULSE

2 Alarm_out

3 GND

4 Video out

5 GND

6 V+12V

14 – High Resolution Compact ATM Camera

Clock port for LINE-LOCK control.

Alarm out port for motion detection.

Grounding Port.

This is connected to the Video Input Port of the monitor and it outputs the Video signals.

Grounding Port.

Input port for DC 12 V power.

. L/L Pulse

1. L/L PULSE

2. Alarm_out

rm out

3. GND

4. Video out

5. GND

. GN

6. V+12V

+ 30 hidden pages