Operating Instructions
VACUUM CLEANER
❈ Before operating this unit, please read the instructions carefully.
❈ For indoor use only.
Register your product at www.samsung.com/global/register
IMPORTANT SAFEGUARDS
1. Read all instructions carefully. Before switching on, make sure that the
voltage of your electricity supply is the same as that indicated on the rating
plate on the bottom of the cleaner.
2. WARNING: Do not use the vacuum cleaner when rug or floor is wet.
3. This appliance is not intended for use by young persons or infirm persons
without supervision unless they have been adequately supervised by a
responsible person to ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the
appliance.
4. Do not use the vacuum cleaner without a dust bag. Replace the dust bag
before it is full in order to maintain the best efficiency.
5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette
butts. Keep the vacuum cleaner away from stoves and other heat sources.
Heat can deform and discolour the plastic parts of the unit.
6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may
damage the cleaner parts. Do not stand on the hose assembly. Do not put a
weight on the hose. Do not block the suction or the exhaustion part.
7. Switch the vacuum cleaner off at the machine before unplugging from the
electrical outlet. Do not pull on the cord to disconnect the plug from the
electrical outlet. Ensure that it is disconnected before attending to the filter.
8. The plug must be removed from the socket out-let before cleaning or
maintaining the appliance.
9. The use of an extension cord is not recommended.
10. If your vacuum cleaner is not operating correctly, switch off the power supply
and consult an authorized service agent.
11. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
12. The vacuum cleaner is provided with a self-resetting thermal cut-out which
automatically shuts off on over-heating. Overheating can be caused by
blockage in the filter, nozzle, tube or hose. After removing the cause and
allowing the motor to cool, the vacuum cleaner will automatically restart.
Do not use to suck up water.
1
ASSEMBLING THE CLEANER
1
OPTION
OPTION
▲
Features may vary according to model.
▲
For storage, park the floor nozzle.
OPTION
▲
Tool storage
2
OPERA TING YOUR CLEANER
2
2-1 POWER CORD 2-2 ON/OFF SWITCH
- VOLUME TYPE - VOLUME TYPE
NOTE :
When removing the
- ON/OFF TYPE - ON/OFF TYPE
plug from the
socket, please take
care to grasp the
plug, not the cord in
order to avoid
undue stress.
2-3 POWER CONTROL(VOLUME TYPE ONLY)
MIN = For delicate fabrics, e.g.
net curtains.
MAX = For hard floors and heavily
soiled carpets.
2-4 SUCTION CONTROL
To reduce suction for cleaning draperies,
small rugs and other
light fabrics, slide the air vent until the
hole is open.
3
2-5 USING FLOOR TOOLS
OPTION
Floor Nozzle
OPTION
OPTION
Detach transparent drum
cover for easy cleaning.
OPTION
Blanket brush Bedclothes or Blanket
OPTION
OPTION
surrounding brush by using scissors.
- Transparent tube(optional)
OPTION
Dusting
Crevice
Cut off pet hairs or threads
▲
Features may vary according to model.
4
DUSTING BRUSH CREVICE TOOL
- Dusting brush for
furniture. shelves,
books, etc.
INDICATOR LIGHTS
3
- Crevice tool for
radiators, crevices,
corners, between
cushions.
When the indicator color has changed
Please replace the dust bag.
- For efficiency. clean
Floor Nozzle with
Crevice Tool.
3-1 CHANGING THE DUST BAG
1
2
3 4
3-2 FOR CLOTH BAG (OPTION)
After using, if the cloth bag is full of dust, clean the cloth bag and use it again.
:
WARNING
Please do not attempt to operate the cleaner without a dust bag
fitted.
5
CYCLONIC FILTER(ONLY CYCLONIC FILTER TYPES)
4
You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter
system and it maintain the maximum cleaning efficiency.
The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when
suctioned air and dust revolves in the Cyclonic Filter. So the dust bag contains only
smaller ones.
When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and
cleaning. Dust Barrel can be cleaned in water.
1.Turn the Dust Barrel to the left and pull it.
2.Disconnect the Cyclonic Filter from extension wand and handle.
3.Remove thread and hair tangled around the net.
4.After cleaning the Dust Barrel and Cyclonic Filter,connect the Cyclonic Filter with
extension wand and handle(washed part should be dried in the shade throughly
before assembling).
5.Push and turn the Dust Barrel to the right.
Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter.
CYCLONIC FILTER
DUST
BARREL
CLEANING THE INLET FILTER
5
CREVICE
TOOL
12 43
OPTION
:
NOTE
Do not allow the filter to become clogged as this may cause power reduction
or may damage the motor.
6
OUTLET FILTER
6
1 2
(
VOLUME TYPE ONLY
)
OPTION
- IF YOU HAVE A PROBLEM
PROBLEM CAUSE REMEDY
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner does not
pick up dirt.
This Vacuum cleaner is approved the following.
EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
No power supply.
Thermal cut-out.
Nozzle, suction hose or
tube is blocked.
Check that the cord is not
twisted or wound unevenly.
Crack or hole in hose.
Check cable, plug and
socket.Leave to cool.
Remove the object.
Pull the cord out 2-3m and push
down the cord rewind button.
Check hose and replace if
required.
DJ68-00287A REV(0.4)
Loading...