Samsung S9C Quick Start Manual

BN68-05357A-01

QUICK START

GUIDE

Welcome to your new Smart TV!

The following instructions cover assembling, connecting, and setting up your new TV. M ake
sure you have the accessories listed below.

Included in this box

Remote Control One connect and Cables

Smart Touch Control Power cord IR extender

Batteries (AAA x 4) RCA Adapter x 2 Component adapter

One connect

Remote Control One connect cable

Also included: User manual, 3D active glasses

Step

1

Attach the TV to
the Stand

Step

2

Connect video
devices

Step

3

Insert the
batteries into the
remote control

Step

4

Power on and
start the initial
setup

Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.

Step 1 Attach the TV to the Stand

1

Open the package, and remove the cushioning.

6

M4 x L20

Secure the stand to the TV using four screws as
shown in the diagram.

REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).

2

Stand cover

Screws

Stand

M4 x L20 4 pieces
M4 x L10 2 pieces

x 4 x 2

Pull the stand out of the top Styrofoam
cushioning, and make the stand face your body,
as shown in the illustration. Insert a finger
into the groove in the middle and pull it up to
separate the cover from the stand.

7

To replace the stand cover, fix its exterior and
then the interior into the stand. Press both
sides firmly to make sure that it is completely
assembled.

3

Remove the TV from the box. Then, remove
the top and bottom pieces of Styrofoam from
the TV, but keep the screen-protection piece
on. Place the TV down on the the box with the
screen facing down.

8

Remove the port cover, and connect the power
cord to the One Connect.

4

Hook

Tilt the stand to put its hook into the groove on
the back of the TV, and push it, giving it a slight
turn until it is firmly in place.

9

Replace the port cover.

5

M4 x L10

Secure the bottom of the stand to the TV using
two screws.

10

Stand the TV up, and remove the Styrofoam
bumper and the 4 protective pads from the
screen.

S9C

Step 2 Connect video devices

We recommend using high speed HDMI connections whenever possible for the best picture quality. Use the included AV adapter to connect older devices.

✎

Please check the shape of the plugs to make to avoid inserting upside down.

✎

The displayed image may differ depending on the mo del.

Best Connection : HDMI

We suggest using HDMI whenever
possible.

HDMI Cable

HDMI 1 is the default port for a

cable or satellite set-top box.

Use the other ports for Blu-ray
players, game consoles, and other
devices.

HDMI Port

USB Connections

You can connect USB storage devices
to the USB ports and enjoy personal
photos, videos, and music.

Good Connection : Component and AV

Match the colors on your device's cables to the colors
on the ports. Connect the yellow composite video out
connector from an AV device to the yellow AV IN port.

Component

AV

Connect the cable
from the antenna or
cable TV outlet.

Wired Ethernet

You can connect home theater systems to the OPTICAL or
AUDIO OUT ports.

or

Connect the IR extender to the IR Out
port to control external devices connect-
ed to the TV using the Smart Touch Con-
trol. For more detailed information, refer
to the "Universal Remote Control Setup"
section on the User manual.

Connect the IR extender to the IR Out

port to control external devices connect-

ed to the TV using the Smart Touch Con-

trol. For more detailed information, refer

to the "Universal Remote Control Setup"

section on the User manual.

Step 3 Using the Smart Touch Control

Insert the batteries into the remote control

With the tip of a credit card (or similar item), use a twisting motion to remove the remote back
cover.

Using the touch pad

navigation selection scrolling

To control the highlight, move

your thumb across the pad.

To select an item, press the

pad until you feel a click.

Move your thumb along the

ridges to quickly scroll through

items.

Troubleshooting

The stand is wobbly or crooked

Make sure the arrows on the stand are properly aligned.

The TV won’t turn on

Make sure all cables are fully inserted, and that the remote has batteries installed.

I don’t know where to plug in <device>

Devices without HDMI may require the included A/V adapter.

I have extra parts

The TV includes some optional parts to help with wall mounting and cable routing.

If you experience issues, please do not take the TV
back to the store.

In the United States of America, call us at
1-800-SAMSUNG (1-800-726-7864) or visit us at www.
samsung.com or www.samsung.com/spsn for support
and warranty service.

For other countries, refer to "Contact SAMSUNG
WORLDWIDE" in the user guide.

Step 4 Power on and start the initial setup

Information required:

• Wi-Fi network password (if you use one) • Zip code • Cable or satellite provider info

Congratulations on your new Smart TV!