Page 1
Washing Machine
Owner’s Instructions
F1235J/F1235JS
F1035J/F1035JS
F835J/F835JS
S835J/S835JS
CODE NO : DC68-00905J
Safety Precautions .................................................................2
lnstalling the Washing Machine ...........................................3
Unpacking the washing machine .............................................3
Overview of the washing machine...........................................3
Selecting a location..................................................................3
Adjusting the leveling feet........................................................3
Removing the shipping bolts ....................................................4
Connecting the water supply hose...........................................4
Positioning the drain hose........................................................4
Washing a Load of Laundry ..................................................5
Overview of the control panel ..................................................5
Washing for the first time.........................................................6
Putting detergent in the washing machine ...............................6
Washing clothes manually .......................................................7
Using delay start ......................................................................7
Selecting options ......................................................................7
Washing tips and hints .............................................................8
Maintaining the Washing Machine .......................................9
Repairing a frozen washing machine.......................................9
Cleaning the exterior................................................................9
Cleaning the debris filter ..........................................................9
Cleaning the water hose mesh filter ........................................9
Troubleshooting...................................................................10
Problems and solutions..........................................................10
Understanding error messages..............................................10
Programme chart .................................................................11
Appendix...............................................................................12
Fabric care chart....................................................................12
Electrical warnings .................................................................12
Protecting the environment....................................................12
Declaration of conformity .......................................................12
Specification...........................................................................13
Page 2
Safety Precautions
Congratulations on your purchase of this Samsung washing machine. These Owner's Instructions contain
valuable information on the installation, use, and care of this appliance. Please take the time to read these
instructions so that you can take full advantage of the washing machine's features and enjoy this appliance
for many years to come.
Before using the appliance
• Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene, etc.)
well out of the reach of children.
• The appliance is designed for home use only.
• Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer's instructions (see "Installing the Washing Machine" on page 3) and local safety regulations.
• All packaging and shipping bolts must be removed before the appliance is used. Serious damage may
occur if they are not removed. See "Removing the shipping bolts" on page 4.
• Before washing clothes for the first time, you must run a complete cycle without clothes. See "Washing
for the first time" on page 8.
Safety instructions
• Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet or set the
(On/Off) button to Off.
• Make sure that the pockets of all clothing to be washed are empty.
Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to
the appliance.
• Always unplug the appliance and turn off the water after use.
• Before you open the door of the appliance, check that the water has drained. Do not open the door if you
can still see water.
• Pets and small children may climb into the appliance. Check the appliance before each use.
• The glass door becomes very hot during the washing cycle. Keep children away from the appliance while
it is in use.
• Do not attempt to repair the appliance yourself. Repairs made by inexperienced or unqualified persons
may cause injury and/or make more serious repairs to the appliance necessary.
• If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent
or a similar qualified person in order to avoid a hazard.
• This appliance should only be serviced by an authorized service center, and only genuine spare parts
should be used.
● SAVE THESE INSTRUCTIONS
2
Page 3
Installing the Washing Machine
Unpacking the Washing Machine
Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the
items shown below. If the washing machine was damaged during shipping or you do not have all of the items, contact your Samsung dealer immediately.
Overview of the washing machine
Cover top
Control panel
Detergent
drawer
Door
Debris filter
Drain Hose
Cold Water
supply hose
Base cover
Adjustable feet
Plug
Bolt hole
covers
Selecting a location
Before you install the washing machine, select a location with the following characteristics:
• A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)
• Away from direct sunlight.
• Adequate ventilation
• Room temperature that will not fall below 0 ˚C
• Away from sources of heat such as coal or gas
Make sure that the washing machine does not stand on its power cord.
Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
Adjusting the leveling feet
If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):
1. Loosen the leg bolt by turning it with your hand until it is
at the desired height.
2. Tighten the locking nut by turning it with the wrench.
• Place the washer on a sturdy, flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs. (Only a 1 degrees angle is
allowed.)
3
Page 4
Installing the Washing Machine
Removing the shipping bolts
Before using the washing machine, you must remove all of the shipping bolts from the back of the unit. To
remove the bolts:
1. Loosen all bolts with the wrench before removing them.
2. Take each bolt head and pull it through the wide part of
the hole. Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Keep the shipping bolts for future use.
Connecting the water supply hose
The water supply hose must be connected to the washing machine at one end and to the water faucet at the
other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water
faucet, replace the hose with a longer, high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply
hose and connect to the cold water supply intake on the
back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to
your sink's cold water faucet and tighten it by hand.
If necessary, you can reposition the water supply hose at
the washing machine end by loosening the fitting, rotating
the hose, and retightening the fitting.
Positioning the drain hose
The end of the drain hose may be positioned in three ways:
Over the edge of a sink
The drain hose must be placed at a height of between 60
and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a
hook or to the faucet with a piece of string to prevent the
drain hose from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and no
longer than 90 cm.
4
Page 5
Washing a Load of Laundry
Overview of the control panel
1. Detergent dispenser
2. Display panel
Displays wash cycle and error messages by LED lamps .
During execution of the program, the program indicator blinks.
3. Delay Start button
Press the button repeatedly to cycle through the available delayed start options.
(from 1 hour to 24 hours in one hour increments).
4. Temperature selection button
Press the button repeatedly to cycle through the available water temperature
options (cold water, 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C).
When pressing this button during washing, you can see the selected temperature in the display panel.
5. Spin selection button
Press the button repeatedly to cycle through the available spin speed options.
F1235J/F1235JS no, rh, 400, 600, 800, 1000, 1200 rpm
F1035J/F1035JS no, rh, 400, 600, 800, 1000 rpm
F835J/F835JS/S835J/S835JS
When pressing this button during operation, you can see the selected spin
speed in the display panel.
6. Option button
Press the button repeatedly to cycle through the available partial wash options
Soak wash ➔ Rinse
Note : Prewash is only available when washing cotton, synthetic or delicate.
7. Course button
Press the button to select one of the eight available wash programs.
Cotton, Colour,Synthetic, Delicate, Handwash, Quick, Rinse+Spin, Spin
8. Start/Pause button
Press to pause and restart programs.
9. (On/Off) button
Press once to turn the washing machine on, press again to turn the washing machine off.
If the washing machine power is left on for longer than 10 minutes without any buttons being touched, the
power automatically turns off.
no, rh, 400, 600, 800 rpm
+
➔ Prewash ➔ (Soak wash+Rinse+) ➔ (Rinse+ + Prewash) ➔ Cancle
● What is the “Child Lock” function?
- If you press the “Child Lock” button(Spin+Option button) longer than 2 sec during operation, this function is selected.
- If once this function is selected, no change can be done until the end of laundry.
- Press the “Child Lock” button(Spin+Option button) longer than 2 sec to cancel the function.
no:no spin,
rh:rinse hold
5
Page 6
Washing a Load of Laundry
WM stops the current step of the cycle or does not proceed to the next
step of washing (indication of remain time on LED display may increase).
Your new washing machine is equipped with Fuzzy Logic system, which not only sets the optimum level of
water and other parameters of washing, but also controls the washing process as well as makes necessary
corrections in order to provide better washing results.
In the above- mentioned matter, the Fuzzy Logic system has detected deviations in washing cycle such as:
high quantity of detergent at the end of the cycle, high vibration level while spinning, etc.You can adjust
existing wash programs, i.e. change wash temperature and spin speed.
After detection of such abnormalities, the washing machine is suspending the normal course of program in
order to normalize these parameters and continue the cycle. Fuzzy logic system makes 7 attempts to eliminate such deviations.
If it is impossible to normalize the above mentioned deviations by Fuzzy Logic system, you will see the corresponding indication on LED lamps.
(see chapter “Troubleshooting”) The operation of Washing machine that corresponds to above- mentioned
scheme is considered to be normal.
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:
1. Press the (On/Off) button.
2. Pour a little detergent in the detergent drawer .
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until 40˚C is displayed.
5. Press the Start/Pause button.
• This will remove any water from the manufacturer’s test run remaining in the machine.
Putting detergent in the washing
machine:
1. Pull out the detergent drawer.
2. Add laundry detergent into compartment .
3. Add softener into compartment (if you
desire).
4. Add prewash detergent into compartment (if you
desire).
✻ Option
Using Hot Water
•The hot water valve is operated when you select a water temperature option above 60˚C (60 ˚C or 95 ˚C).
6
Page 7
Washing a Load of Laundry
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1. Turn on the water at the water source sink.
2. Press the (On/Off) button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent in the detergent drawer .
7. Repeatedly press the Program button to select the cycle you prefer:
(Cotton, Synthetics, Delicates, and Quick)
8. Press the Temperature button to select the temperature (cold water,30˚C , 40˚C, 60˚C, 95˚C).
9. Press the Spin button to select the spin speed,
[no, rh, 400, 600, 800, …, no, … ]
10. Repeatedly press the Option button to select the cycle you prefer:
Prewash (for Cotton, Colour,Synthetic, Delicate only)
11. Press the Start/Pause button and the machine will begin the cycle.
When the cycle is finished:
1. Open the door.
Note: The door will not open until 3 minutes after the machine stops or the power turns off.
2. Remove laundry.
Using Delay Start
You can set the washing machine to start your wash automatically at a later time, choosing
from a 1 to a 19 hour delay (in 1 hour increments).
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will
begin counting down until it reaches your start time.
4. To cancel Delay Start, press the (On/Off) button, then turn the washing machine on again.
Selecting options
Prewash
Prewash is only available when washing cotton, synthetics, delicate clothes. To use prewash:
1. Load the prewash detergent into compartment of the detergent drawer.
2. Select "Cotton" with the Program select button.
3. Press the Option button until the "Prewash" indicator lights up on the control panel.
4. Press Start/Pause to begin the cycle.
+
Rinse
Your machine will run through an additional rinsing cycle.
The washing duration will be prolonged accordingly.
Soak Wash
Select this option for heavily soiled laundry. The machine soaks the laundry for 40 minutes (the drum rotates
occasionally). This function cannot be used with the wool and Quick program.
7
Page 8
Washing a Load of Laundry
Washing tips and hints
Sorting your laundry: Sort your laundry according to the following characteristics:
• Type of fabric care label symbol: Sort laundry into cottons, mixed fibers, synthetics, silks, wools and
rayon.
• Colour: Divide whites and colours. Wash new, coloured items separately.
• Size: Placing items of different sizes in the same load will improve the washing action.
• Sensitivity: Wash delicate items separately, using the Delicate wash program for pure new wool, curtains
and silk articles. Check the labels on the items you are washing or refer to the fabric care chart in the
appendix.
Emptying pockets: Coins, safety pins and similar items can damage linen, the washing machine drum, and
the water tank.
Securing fasteners: Close zippers and fasten buttons or hooks; loose belts or ribbons should be tied
together.
Determining load capacity: Do not overload the washing machine or your laundry may not wash properly.
Use the chart below to determine the load capacity for the type of laundry you are washing.
Course F1235J/F1035J/F835J S835J
F1235JS/F1035JS/F835JS S835JS
Colour/cotton
-average/lightly soiled 5.2 kg 3.5kg
-heavily soiled 5.2 kg 3.5kg
Synthetics 3.0 kg 2.0kg
Delicates 2.0 kg 1.5kg
Handwash 1.5 kg 1.0kg
Detergent tips: The type of detergent you should use is based on the type of fabric ( Cotton, Synthetic,
Delicate items) colour, wash temperature, degree and type of soiling. Always use "low suds" laundry soap,
which is designed for automatic washing machines.
When determining the detergent quantity, it’s necessary to consider recommendations of the detergent
manufacturer, indicated on the package, as well as weight, type of laundry, it’s fouling factor and water
hardness in your region.
Note:
Keep detergents and additives in a safe, dry place out of the reach of children.
8
Page 9
Maintaining the Washing Machine
Repairing a frozen washing machine
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water on the source faucet to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply and drain operations
are normal.
Cleaning the exterior
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and non-abrasive
household detergents.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water on the washing machine.
Cleaning the debris filter
Clean the debris filter 2 or 3 times a year.
1. Remove the base cover from the front of the washing machine.
2. Unscrew the filter cap and take it out.
3. Wash any dirt or other material from the filter. Make
sure the drain pump propeller behind the filter is not
blocked. Replace the filter cap.
4. Replace the base cover.
Cleaning the water hose mesh filter
You should clean the water hose mesh filter at least one time per year,, or when the lamps on your machine
flickers:
To do this:
1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse it under water until
clean. Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are
watertight.
9
Page 10
Troubleshooting
Problems and solutions
The washing machine will not start
• Make sure the door is firmly closed.
• Make sure the washing machine is plugged in.
• Make sure the water source faucet is turned on.
• Make sure to press the Start/Pause button.
No water or insufficient water supply
• Make sure the water source faucet is turned on.
• Make sure the water source hose is not frozen.
• Make sure the water intake hose is not bent.
• Make sure the filter on the water intake hose is not clogged.
Detergent remains in the detergent drawer after the wash program is complete
• Make sure the washing machine is running with sufficient water pressure.
• Put the detergents in the inner parts of the detergent drawer(away from the outside edges).
Washing machine vibrates or is too noisy
• Make sure the washing machine is set on a level surface. If the surface is not level, adjust the washing
machine feet to level the appliance (see page 3).
• Make sure that the shipping bolts are removed (see page 4).
• Make sure the washing machine is not touching any other object.
• Make sure the laundry load is balanced.
The washing machine does not drain and/or spin
• Make sure the drain hose is not squashed or bent.
• Make sure the water hose mesh filter is not clogged (see page 8).
Understanding error messages
Error displayed Solution
• Close the door.
• Make sure the source water faucet is turned on.
• Check the water pressure.
• Clean the debris filter.
• Make sure the drainage hose is installed correctly.
• Laundry load is unbalanced; loosen any tangled laundry.
• If only one item of clothing needs washing, such as a bathrobe or jeans, the
final spin result might be unsatisfactory and an "E4" error message will be
shown in the display window.
• Check the end of the drain hose is too low. (Make sure the holder of drain
hose in the back is intact)
• Check the end of the drain hose is submerged in water.
Before contacting After-Sales service:
1. Try to remedy the problem (See "Troubleshooting" on this page).
2. Restart the programme to see if the fault is repeated.
3. If the malfunction persists, call after-sales service and describe the problem.
10
Page 11
Programme Chart
PRO-
GRAM
Max
load
(kg)
DETERGENT
AND ADDITIVES
Pre
wash
wash
Sof
tener
Temperature
(MAX)
F1235/
˚C
F1235JS
Spin Speed(MAX)rpm
F1035/
F835/F835JS
F1035JS
S835J/S835JS
Delay
start
Function
Pre wash
Water
(l)
Electri-
city
(kWh)
Cotton 5.2 ✽ yes ✽ 95 1200 1000 800 ✽✽
Colour 5.2 ✽ yes ✽ 95 1200 1000 800 ✽✽
Synthetic 3.0 ✽ yes ✽ 60 800 800 800 ✽✽
Delicate 2.0 ✽ yes ✽ 40 600 600 600 ✽✽
Handwash 1.5 - yes ✽ 40 400 400 400 ✽ -
Quick
3.0 - yes ✽ 40 1000 1000 800 ✽ -
PROGRAM Type of WASH
Cotton Averagely or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.
Colour Average or lightly soiled cottons, bed linen, table linen, underwear, towels,
shirts, etc.
Synthetic Lighly or averagely soiled blouses, shirts, etc. Made of polyester(Diolen, Trevira),
polyamide(perlon, Nylon) or similar blends.
Delicate Delicate curtains, dresses, skirts, shirts and blouses.
Handwash Only machine washable wollens with pure new wool label.
Quick Lightly soiled cottons or linen blouses, shirts, dark coloured terry cloth, coloured linen
articles, jeans, etc.
1. The programme duration data has been measured under the conditions specified in Standard IEC
456.
2. Consumption in individual homes may differ from the values given in the table due to variations in
the pressure and temperature of the water supply, the load and the type of laundry.
11
Page 12
Fabric care chart
Appendix
Resistant material
Delicate fabric
Item may be washed at 95˚C
Item may be washed at 60˚C
Item may be washed at 40°C.
Item may be washed at 30°C.
Item may be hand washed
Dry clean only
Can be bleached in cold water
Do not bleach
Can be ironed at 200˚C max
Can be ironed at 150˚C max
Can be ironed at 100˚C max
Do not iron
Can be dry cleaned using any solvent
Dry clean with perchloride, lighter fuel,
pure alcohol or R113 only
Dry clean with aviation fuel, pure alcohol or
R113 only
Do not dry clean
Dry flat
Can be hung to dry
Dry on clothes hanger
Tumble dry, normal heat
Tumble dry, reduced heat
Do not tumble dry
Electrical warnings
To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind:
• Operate the appliance only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. This plug will fit into the power outlet only one way. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, contact your
electrician to replace your outlet.
• Protect the power cord. Power supply cords should be routed so that they are unlikely to be walked on or
pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
Protecting the environment
• This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be
connected to a power source. Remove the door so that animals and small children cannot get trapped
inside the appliance.
• Do not exceed the detergent quantities recommended in the detergent manu-facturers' instructions.
• Use stain removal products and bleaches before the wash cycle only when strictly necessary.
• Save water and electricity by only washing full loads (the exact amount depends upon the program used).
Declaration of conformity
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
12
Page 13
Specification
TYPE FRONT LOADING WASHER
DIMENSION W598mm x D400mm x H844mm W598mm x D340mm x H844mm
WATER PRESSURE 50 kPa ~ 800 kPa
WEIGHT 68 kg 52kg
WASH and SPIN CAPACITY 5.2 kg (DRY LAUNDRY) 3.5kg (DRY LAUNDRY)
POWER WASHING F1235J/F1035J/F835J S835J
CONSUMPTION F1235J/F1035J/F835J S835J
WATER VOLUME F1235J/F1035J/F835J S835J
SPIN REVOLUTION MODEL
Appendix
F1235J/F1035J/F835J/F1235JS/F1035JS/F835JS
F1235J/F1035J/F835J/F1235JS/F1035JS/F835JS
220V / 180W 70W
240V / 180W 70W
WASHING AND 220V / 1800W 1800W
HEATING 240V / 2100W 2100W
SPIN
PUMPING 34W
rpm
MODEL
F1235J/F1035J/F835J S835J
49l(STANDARD COURSE) 43l(STANDARD COURSE)
230V
F1235J/
F1235JS
1200
F1235J/
F1235JS
550W
F1035J/
F1035JS
F1035J/
F1035JS
1000
S835J/S835JS
S835J/S835JS
F835J/
F835JS
500W
430W
F835J/
F835JS
800
S835J/
S835JS
200W
S835J/
S835JS
800
IN CASE THE NEED FOR
SERVICING ARISES
- Don't hesitate to call any AS center nearby with your
name, address, telephone number, model number and
serial number of your machine when anything wrong with
your product occurs.
Loading...