SAMSUNG S50HW-YD01 Specification

Global LCD Panel Exchange Center

FOR MESSRS: DATE: 29. Sep. 2005

CUSTOMER’S SPECIFICATIONS

1,269cm (50 Inch) Wide Plasma Display Module

www.panelook.com

TENTATIVE

(Tentative Edition)

MODEL : S50HW-YD01

(NTSC/PAL)

* This specification will be approved by both

* Please return one of this specifications with your signature for approval.

Proposed by: Approved by:

Customer and Samsung SDI Co.,Ltd.

Signature

Vice President Sung Do Kim

Quality Innovation Team,

PDP Division,

Signature .

CONFIDENTIAL

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

Revision Date Description Of Changes Approval

1 2005-09-29 - Newly established - Design

www.panelook.com

Revision History

Confidential -2 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

TABLE OF CONTENTS

1. DESCRIPTION ……………..…..………………………………………………….….. .5

2. FEATURES ………..………………………………………………………………..…..5

3. PRODUCT NAME AND MODEL NUMBER ………………………………….….5

4. FUNCTION OUTLINE …………….………….……………………………..…………5

5. BLOCK DIAGRAM ……………………………….…………………………..……….6

6. DISPLAY CHARACTERISTICS …………….…………………………………….….7

6.1 Display Performance ……………………….…………………………………..………………….…..……7

6.2 Display Cell Arrangement ……………….…………………………………………………..………….…8

6.3 Brightness Measurement Condition …….…………………………………………………..………..…....9

6.4 Contrast Measurement Condition ……….………………………………………………….……..……...10

6.5 Display Cell Defect Specifications…………….…………………………………………………………11

6.6 Uniformity Specifications ………………..………………………………………...…………….…….12

6.7 Power Consumption………………..……………………………………..……..……………………....13

6.8 Gamma Characteristics ………………………….……………………..……..……………..…….….….15

www.panelook.com

7. SOUND PRESSURE LEVEL SPECIFICATION ………………..……………………16

7.1 Measurement Condition ………….…….…………………….……………..……..………….………….…16

7.2 Specification …………………….…….……………….…………….…………..….……..………….…………..16

8. MECHANICAL CHARACTERISTICS ……………..………….…….………………..17

8.1 Mechanical Specification…………………………………………………………………..………….………..17

8.2 Mechanical Characteristics…………..……………………………………………………..…………..……..17

9. ENVIRONMENTAL CONDITIONS ………………………………………………..…18

9.1 Operational Environmental Condition ……………………………………………………….……….………..18

9.2 Storage Environmental Condition ……………………………………………………………….………..……..18

10. INTERFACE SIGNAL SPECIFICATION ……..……………………………….…….19

10.1 Configuration Context …………………….………………………………………………………………....19

10.2 Interface function Specifications ……………………….………………………………………………….……20

10.3 Input Signal Definition ……………………………….………………….……………………………….……20

10.4 LVDS Signal Definition and Function ………………..………………………………………………….……21

10.5 LVDS Signal Pin Assignment…………….………………….…………………………………………….……22

10.6 Video Signal Definition and Function……………………….…………………………………………….……24

10.7 Electrical Condition of Interface Signals ………….…………………………………………………….……25

10.8 Video Signal Interface Timing Conditions ……….………………………………………………….…26

10.9 LVDS Interface Timing Conditions ………..……….………………………………………………….……28

10.10 LVDS Connection Specifications…………………….…………….…………………………………….……28

10.11 Connector Specifications ……………………………….………………………………………………………29

10.12 I2C Interface Conditions ……..……………….…………………………..……………………………….…30

Confidential -3 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

11. SMPS Input Power Voltage Specifications ………………………………………….…34

12. OTHERS …………………………………………………………………………….…41

12.1 Mechanical Dimensions Drawing ………………………………………………….………………...……...41

12.2 Label ………….………………….………………………………….………….…….………………………..43

12.3 Serial No ……….……..……………………………………………………………….………………………...45

13. PACKING …………………………………………………………………...…….………46

13.1 Packing Dimension and Parts List …..……………………………………….…………………………………46

13.2 Packing Assay drawing …..…………………………………………………………………………………. 46

14. RELIABILITY ………………………...……………………………………………….…47

14.1 Expected Service Life ……….……………….…………………………….………………………..…………47

15. WARNINGS/ CAUTIONS / NOTICE………………………………………………….48

www.panelook.com

15.1 Warnings ….……….………………………………………………………………….….…..………………..48

15.2 Cautions ………...……………………………………………….……………………………….….…………49

15.3 Notice ………….…………………………………………….…………………………………..……………..50

Confidential -4 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center



Samsung SDI Co. Ltd. Specifications Plasma Display Module

1. DESCRIPTION

The S50HW-YD01
1,366(H)  768(V) pixels. The display module includes Display Panel, Panel driving
electronics, Logic controller & Power Supply Unit.

is a 50-inch wide full color plasma display module with a resolution of

2. FEATURES

• Wide aspect ratio(16:9) 50 inch diagonal display screen. The display area is 1,106.46
wide and 622.08 high.

• Slim and light weight. The display module is 63.5.
approx.25.6 include power supply.

• 1073.7 million colors(10Bit), 16.77 million colors(8Bit) combination of R,G and B digital

data.

• High Luminance, High contrast, Wide viewing angle. The screen has a white peak

Luminance of typical 1100 cd/(min. 1000 cd/), contrast of typical 8000:1 (TBD)
with PE Algorithm and a viewing angle of greater than 160 comparable to that achieved

www.panelook.com

in depth and weights only

with CRTs.

3. PRODUCT NAME AND MODEL NUMBER

• Product name : 50-inch Full Color Plasma Display Module(Abbreviation : PDP module)

• Model number : S50HW-YD01

4. FUNCTION OUTLINE

• The PDP module has APC(Automatic Power Control) function which restricts
power consumption within certain value with regard to each display load ratio.

• The PDP module is operated by following digital video signals;

Vertical synchronous signal, Horizontal synchronous signal, DLCK and
8bits/10bits data signal of each R,G, and B color.
All signals are based on LVDS level.

• The PDP module is operated at 50HZ or 60Hz frame rate.
Available frequency range has been specified at ‘Interface Signal Specification’ section.

• The PDP module requires several types of input voltage; voltage for LOGIC control
board, Y-driver board, X-driver board and address buffer board.

• The PDP module is operated at progressive signal only.
It is required external progressive scan conversion in order to display the other formats.

• Input AC voltage range : Rated : 100~240V, Maximum : 90~264V.

Confidential -5 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

5. BLOCK DIAGRAM

LOGIC CONTROL

R-Data

DATA_R

8,10 Bits

8Bits

G-Data

DATA_G
8,10 Bits

8Bits

B-Data

DATA_B

8,10 Bits

8Bits

DCLK

DCLK

VSYNC

Vsync

HSYNC

Hsync

DEN

Enab le

LVDS

Interface

Input Data Proc essor

www.panelook.com

Display

DRAM

Data

Data Con troll er

Timing Controller

Driver

Timing

Driv er

Scan

Timing

Driv er

Row

Generator

YPulse

DRIVER CI RCUI T & PANEL

1366768 Pixels

13663768 Cells

Column Driver

Generator

XPulse

Vcc
Vset Vsc

Reference

-3V 3 : Voltage for Logic Control

-Vcc : Voltage for FET driver

-Va : Voltage for address pulse

-Vs : Voltage for sustain pulse

-Vsc : Voltage for scan pulse

-Ve : Voltage for X ramp pulse

-Vset : Voltage for Y ramp pulse

Figure-1. Block Diagram of PDP module

3V3

VsVa

Ve

Confidential -6 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

(1 p

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6. DISPLAY CHARACTERISTICS

6.1 Display Performance

No Item Rating

www.panelook.com

1

Display Pixels

2

Display Cells

3

Pixel Pitch Horizontal 0.810 Vertical 0.810 

4

Cell Pitch

5

Cell Arrangement R,G,B Hero (refer to Figure-2)

6

Effective Display Size

7

Number of Color

Brightness *1*5

8

(Peak Brightness)

Contrast Ratio *2

9

(in dark room, w PE)

Brightness

10

(Full white Brightness)

Horizontal 1366Vertical 768 pixels

ixel = 1 R,G,B cells)

Horizontal 4,098 Vertical 768 cells

R: Horizontal 0.270  Vertical 0.810 
G: Horizontal 0.270  Vertical 0.810 
B: Horizontal 0.270  Vertical 0.810 

Horizontal 1106.46  Vertical 622.08

1073.7 million colors (10Bit)

16.77 million colors (8Bits)

NTSC : Minimum 1000 cd/, Typical 1100 cd/
PAL : Minimum 850 cd/, Typical 1000 cd/

NTSC : Typical 8000:1 (TBD)
PAL : Typical 4000:1 (TBD)

NTSC / PAL : Minimum 150 cd/, Typical 165 cd/

11

Viewing Angle *4

[Note]

* 1. Brightness is the value that measured with 1% load ratio white pattern. The condition

for measurement is shown in Figure-3.

* 2. Contrast Ratio is calculated from the display brightness and the non-display brightness

value, and display condition is shown in Figure-3.

* 3. Chromaticity Coordinates are the values measured with Full W/R/G/B(100%) pattern.

Measuring point is the center of a panel while the pattern is on Full W/R/G/B.

* 4. Viewing angle is the critical angle at which the brightness is reduced to 50% to the

brightness perpendicular to PDP module.

* 5. PE = Peak Enhancement Algorithm.

Over 160

Confidential -7 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.2 Display Cell Arrangement

Total : 1366768 pixels.

www.panelook.com

1st

Pixel

Row

2nd

Pixel

Row

767th

Pixel

Row

Vertical

Pixel

Pitch

(0.810)

1st

Pixel

Column

Horizontal

Pixel Pitch

(0.810)

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

2nd

Pixel

Column

3rd

Pixel

Column

1364th

Pixel

Column

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

1365th

Pixel

Column

1366th

Pixel

Column

768th

Pixel

Row

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

B G R B G R B G R

Confidential -8 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

g

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.3 Brightness Measurement Condition

(1) Display Pattern

Effective Display Area

www.panelook.com

Effective Display Area

216

346

48

76

216

383 86 383

marked area : White display area by maximum gradation setting

marked area : Black color (non-display area)

ure-3. DisplayPattern for B rightness & Contrast Ratio Measurement

Fi

136 615 615

Unit : Pixels(=lines)

(2) Display Area ratio : 1% white window

(3) Vsync : 16.7msec or 20msec

(4) Measuring equipment : MINOLTA CA-100+H (High Luminance Probe)

Pattern Generator(VG-828, LVDS Output).

(5) Ambient Temperature : Room Temperature

(6) Ambient Light : dark Room (<2 lux)

[ Note]

1. Measurement is done within 3 seconds after Power On. The temperature of panel

before measurement is room temperature (25).

(PE (Peak Enhancement Algorithm) is used in this measurement.)

346

Confidential -9 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

g

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.4 Contrast Measurement Condition

(1) Measurement point

H : Ef fectiv e D ispl ay Ar ea

www.panelook.com

W : Effective Display Area

P1

H*0.1

W*0.1

Fi

ure-4. Measurementpoint

(2) Vsync : 16.7 msec or 20msec

(3) Measuring Equipment : MINOLTA CA-100+H (High Luminance Probe)

Pattern Generator(VG-828, LVDS Output).

(4) Contrast Calculation fomula

Luminance of 1% white window Area at the center of the screen
Contrast ratio =
Luminance of Black Area *1

[Note]

1. It is recommended to measure just one point, P1 of Figure.-4 on display pattern of

Figure.-3.

(5) Ambient Light : Dark Room (<2 lux)

Confidential -10 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

in

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.5 Display Cell Defect Specification

In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into four types;
(1) Non-lighting cell defect : defect in which the cell is always off
(2) Non-extinguishing cell defect : defect in which the cell is always on.
(3) Flickering cell defect : defect in which the cell is flickering.
(4) High intensity cell defect : defect in which the cell is brighter than other cells
(5) Test Pattern : Full White, Full Red, Full Green and Full Blue with 255 gray level.

The display cell defect specifications define the allowed limits for display cell defects and
are used as the criteria in determining whether a panel should be shipped.

www.panelook.com

Figure 5. Measuring Area

Item

Continuous Cell defect

Non-lighting cell defect

Non-extinguishing cell defect

Flickering cell defect

Total defect

 Zone A: 1 and less
 Zone B: 2 and less

 Zone A: 5 and less
 Zone B: 9 and less

 Zone A: 2 and less
 Zone B: 3 and less

 Zone A: 2 and less
 Zone B: 3 and less

Total number of cell defects

Specification

Number of cell defects

i

Zone A and B is less than 16

* Note : No black dot effects, which were present on v3 panels, should be present.

Confidential -11 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.6 Uniformity Specifications

The color-PDP uses ultraviolet light produced by gas discharge to illuminate phosphor.
Uneven phosphor coating and inconsistent discharge characteristics may cause slight
difference in brightness and chromaticity coordinates in a panel.
The Brightness Uniformity and White Uniformity are measured at Full White of 1023(10Bit)
or 255(8Bit) gray level. Its measuring points are defined in Figure-6.

www.panelook.com

Figure 6. Measuring Areas

1) Brightness Uniformity at Full White.

Item

The brightness is measured at 9 points (A1~A9 of
Brightness
Uniformity

Fig-6) on full white pattern.

The brightness uniformity is calculated from the

following equations.

Equation

Max - A5

A5

Definition

× 100%

&

Specification

10% and less

A5 - Min

× 100%

A5

Confidential -12 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.7 Power consumption

6.7.1 APC (Automatic Power Control) Function
The PDP has an APC (Automatic Power Control) function for the total power consumption
control. If the total display load ratio exceeds approximately 10%, the total power
consumption is limited within a specified level(=Lower Power Limit) by APC function.
The operational behaviour of APC function is called as SLOW-APC. If the display load-ratio
changes from low to high value, the power-consumption rises instantly to “Upper Power
Limit” and gradually decreases until it reachs to the “Lower Power Limit”.
* Note : Number of steps can vary as a function of load ratio.

6.7.2 Brightness and Power Mode Control

This PDP module offers the methods for Brightness and Power mode control..

APCO(APC Offset) is for Peak-Brightness control. using I2C communication from image B’d

side. For a detailed address and data bits of these registers, refer to the Chapter 11. Address
Map.

1) Peak-Brightness Control( APCO)

- controls the max.sustain number

- APCO variable range : 00~C7h (Default value = 00h)

Sustain
number

Max. Sustain

Power

Upper Power
Limit

Lower Power
Limit

www.panelook.com

Figure-8 Slow APC Behaviour

Power
Load-ratio

Time for transition between 2 setps = 16 frames
(This could be controlled by R_HOLD_TIME (Add:D2h))

t

Normal Bright Mode (APCO=00h)

2/3 Peak-bright Mode (APCO=60h)
1/3 Peak-bright Mode (APCO=C7h)

Min. Sustain

Figure-9. APCO Behavior

0 100%

Cmax

load ratio

Confidential -13 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.7.3 Power Consumption Specification

Slow APC Control System

Figure-12. Display load ratio vs. Power consumption

www.panelook.com

Upper : 390W

Lower : 370W

[Note]

1. In this case the PDP Module includes PSU.

2. The Efficiency of PSU is about 81% under conditions of AC 100V, 60Hz.

It is measured on full screen white pattern with input gray-level 1023(10Bit) in

module. Power consumption is the same for PAL and NTSC mode.

Confidential -14 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

6.8 Gamma characteristics

6.8.1 Basis of Gamma Curve

This PDP module is optimized with 2.0 gain gamma curve. (refer to Figure-13)
Gamma curve specification could be modified on the request of the customer.

www.panelook.com

Figure-13. Gamma Curve (2.0 Gain)

6.8.2 Gamma Table
Gamma curve is a 2.0 Curve (Default)

Confidential -15 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

7. SOUND PRESSURE LEVEL SPECIFICATION

7.1 Measurement Condition

(1) Background Noise Level : less than 20dBA
(2) Measuring Pattern : Dynamic Images (only, Full Black to Full White)
(3) Measuring Equipment : Sound level meter Type 2827 made by B&K
(4) Measuring Distance : 1m from the rear side of PDP Module
(5) Measuring point

www.panelook.com

7.2 Sound Pressure Level :

Sound Pressure Level : Max.33dB(50Hz ~ 8kHz)

 Bandwidth :  Octave
 Weighting Filter : A-weighting network

 Note 

1.PSU must be included in this measurement.

2.Measrurement pattern : Full White

Figure-12. Measuring Point

Confidential -16 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

8. MECHANICAL CHARACTERISTICS

8.1 Mechanical Specifications

No Item Rating

www.panelook.com

Outer

1

Dimension

2 Weight

Width 1184  Height 700  Thickness 63.5

*see 13. Mechanical Dimension Drawing

25.6kg (include power supply)

8.2 Mechanical Characteristics *1

No Item Rating

Frequency : 10 ~ 55 Hz

1 Vibration

2 Shock

[ Note]

1. Test Condition : Non- Packaging Operational (Except drop test)

2. Test Time of Vibration Test : 30 minutes every direction(x,y,z)

3. The number of times for shock test is 6 times every direction(x,y,z)

4. After vibration & shock test as indicated above, this product still complies with screen
quality like cell defects.

5. Directions

Sweep Rate : 1 Octave/min

Stroke : x,y direction - 0.35 mm, z direction - 0.175 mm

Acceleration : less than 20G (x,y direction)

less than 10G (z direction)

Duration Time : 11 ms

y

z

x

Confidential -17 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Samsung SDI Co. Ltd. Specifications Plasma Display Module

9. ENVIRONMENTAL CONDITIONS

9.1 Operational Environmental Condition

No Item Rating

1 Ambient

Temperature

2 Panel Surface

Temperature *3

[NOTE]

1. Functional Operation means that the PDP module is operated only its electrical function.

2. Display Operation means that the PDP module is operated in its full specifications.

3. Panel Surface Temperature means the surface temperature of panel that is just increased due
to the loss of power inside Panel during the image display at a normal display mode and a
ambient temprature defined in this table.
The judgement of display defects (e.g. weak discharge, missing discharge) should be done
when the panel is operated at a ambient temperature defined in this table.

4. After operation at altitude higher than 2000m (795hPa), when using again within display
operational range (<2000m) this product is still fully operational (no hum, no miss-firing cells

9.2 Storage Environmental Condition *1

No Item Rating

1 Ambient Temperature
2 Humidity 5 ~ 95 RH (no condensation)

3 Pressure 300 ~ 1013 hPa (0~9000m)

[NOTE]

1. Storage means the short term period. (e.g. transportation, relocation and so on)

www.panelook.com

Fuctional Operation *1
Display Operation *2
Small Size Pattern

Full White Pattern

Temperature Slope
Fuctional Operation *1 5 ~ 90 RH (no condensation) 4 Humidity

Display Operation *2 20 ~ 80 RH (no condensation)
Fuctional Operation *1 701 ~ 1013 hPa (0~3000m) 5 Pressure
Display Operation *2 795 ~ 1013 hPa (0~2000m) *4

-10 ~ 70

-5 ~ 70
0 ~ 60

~ 120
~ 85
Below 20/cm

Confidential -18 / 57-

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com