SAMSUNG S42SD-YD01 Specification
Global LCD Panel Exchange Center
www.panelook.com
FOR MESSRS: DATE:
16.October.2002
SPECIFICATIONS
106cm (42 Inch) Wide Plasma Display Module
MODEL : S42SD-YD01
SDI
(PAL/NTSC)
x This specification will be approved by both Creative Technology Ltd and Samsung SDI
Co.,Ltd.
* Please return one of this specification with your signature for approval.
Proposed by: Approved by:
Signature
Manager
Customer Quality Group,
PDP Business Division,
Samsung SDI CO.,LTD
Signature
CONFIDENTIAL Spec. Rev. : Version 3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
SAMSUNG SDI CO.,LTD.
SDI
Document: VSC-PRO-FSPPDP-01
Version # 1.0
Date: November 20, 2000
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
SDI
Revision History
Revision Date Description Of Changes Approval
0 14.Feb.2002 Newly established
- Display Performance(6p)
1 07.May.2002
2 25.June.2002 - Input Power Voltage Specification(20-22p)
- Brightness Variation Specification(11p)
- Input Signal Specifications(13-14p)
3 16.October.2002 - Input Power Specification(21p)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
SDI
TABLE OF CONTENTS
1 DESCRIPTION …………..………..………………………………..…………………….….. .4
2 FEATURES ………..……………………..…………………………..……………………..…..4
3 PRODUCT NAME AND MODEL NUMBER.……… …………………………………….….4
4 FUNCTION OUTLINE …………….………….……………………………………..…………4
5 BLOCK DIAGRAM ……………………………..……………………………………..……….5
6 DISPLAY CHARACTERISTICS………….…………………………………….….….6
6.1 Display Performance ………………………………………………………..…………………..…..……6
6.2 Display Cell Arrangement ………………………………………………………………..….……….…7
6.3 Brightness Measurement Condition ……………………………………………………..….……..…....8
6.4 Contrast Measurement Condition ……………………………………………………….….…...……....9
6.5 Display Cell defect specification. ……………………………………………………….….…...……....10
6.6 Brightness Variation Specification …………………….…………….………………………...….….…11
7. MECHANICAL CHARACTERISTICS…………………………………….………..………..12
7.1 Mechanical Specification…………………………………………………………..………..….………..12
7.2 Mechanical Characteristics…………………………………………………………..……..……..……..12
8. ENVIRONMENTAL CONDITION …………………………………………………..……..…12
8.1 Recomended Environment Condition ………………………………………………….……..…..……..12
9. INTERFACE SPECIFICATION ……..………………………………………………….…….13
9.1 Input Signal Specification ……………………………………………………………………………....13
9.2 Input Power Voltage Specification ………….…………………………………………………….……19
10. APPENDIX …………………………………………….………………………..…..…..….…….25
10.1. Mechanical Dimensions Drawing Front Side ……………….…..………………………….………...25
10.2. Mechanical Dimensions Drawing Rear Side ………………………………………………….……...26
11. RELIABILITY …………………………………………………….…………………………….. ….…… 27
11.1 MTBF ………………………………………………………..……………………….…..……….….…27
11.2 Expected ServiceLife……………….……………………………………………………………………27
12. WARNINGS/ CAUTIONS / NOTICE………………………………..………………………...28
12.1 Warning……………….……………………….…………………………………………………………28
12.2 Caution.……………….……………………….…………………………………………………………29
12.3 Notice...……………….……………………….…………………………………………………………30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
1. DESCRIPTION
The S42SD-YD01 is a 42-inch wide full color plasma display module with a resolution of
852(H) × 480(V) pixels. The display module includes Display Panel, Panel driving
electronics, Logic controller and Power supply .
2. FEATURES
x Wide aspect ratio(16:9) 42 inch diagonal display screen. The display screen is 920㎜
wide and 518㎜ high.
x Slim and light weight. The display module is 71㎜ in depth and 22.5㎏ in weight.
x 16.77 million colors by combination of 8 bits R,G and B digital data
x High brightness, High contrast, Wide viewing angle. The screen has a white
peak brightness of Typical 500cd/㎡, contrast of Typical 550:1 and a viewing angle of
greater than 160° comparable to that achievied with CRTs.
SDI
3. PRODUCT NAME AND MODEL NUMBER
x Product name : 42-inch Full Color Plasma Display Module
(abbreviation : PDP Module)
x Model number : S42SD-YD01
4. FUNCTION OUTLINE
x The plasma display module has APC(Automatic Power Control) function which restrict
power consumption within certain value without regard to display load ratio.
x The plasma display module is operated at 50HZ or 60Hz frame rate. It is required
external frame rate conversion in order to display the other formats.
x The plasma display module is made up of 4 types of input power voltages; Voltage for
operating Logic, Voltage for FET driver, Voltage for Column driver, and Voltage for
Display driver.
x The plasma display module is operated at progressive signal only.
It is required external progressive scan conversion in order to display the other formats.
x The plasma display module requires 90~240V, 50~60Hz of input power voltage
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
5. BLOCK DIAGRAM
SDI
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
6. DISPLAY CHARACTERISTICS
6.1 Display Performance
No Item Rating
1 Display Pixels
2 Display Cells
3 Pixel Pitch
4 Cell Arrangement R,G,B Stripe
5 Effective Display Size
Horizontal 852 × Vertical 480 pixels
(1 pixel = 1 R,G,B cells)
Horizontal 2556 × Vertical 480 cells
Horizontal 1.08 × Vertical 1.08 ㎜
Horizontal 920.16㎜× Vertical 518.4㎜
[ 36.23 inch (H) × 20.41 inch (V) ]
SDI
6 Number of Color 16.77 million colors
7
8
9
10 Viewing Angle *3
Brightness *1
(Peak Brightness)
Contrast Ratio *2
(in dark room)
Chromaticity Coordinates
(Typical Value)
Typical 500cd/㎡(module, LVDS input)
Typical 550:1
White
Red
Green
Blue
X = 0.285±0.03, Y = 0.290±0.03
X= 0.645±0.03, Y= 0.345±0.03
X= 0.250±0.05, Y= 0.665±0.04
X= 0.155±0.04, Y= 0.090±0.04
Over 160°
(Note)
* 1. Brightness and Color Coordinates are the value that measured with 1% load ratio white
pattern. The condition for measurement is shown in Figure-3.
* 2. Contrast Ratio is calculated from the display brightness and the non-display brightness
value, and display condition is shown in Figure-3.
* 3. Viewing angle is the critical angle at which the brightness is reduced to 50% to the
brightness perpendicular to the PDP unit.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
6.2 Display Cell Arrangement
SDI
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
6.3 Brightness Measurement Condition
(1) Display Pattern
SDI
(2) Display Area ratio : 1% white window
(3) Vsync : 16.7msec
(4) Measuring equipment : MINOLTA CA-100
(5) Ambient Temperature : Room Temperature
(6) Ambient Light : dark Room (<2 lux)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
CONFIDENTIAL
6.4 Contrast Measurement Condition
(1) Measurement point
.
SDI
(2) Vsync : 16.7 msec
(3) Measuring Equipment : MINOLTA CA-100
Pattern Generator(VG-828, LVDS Output).
(4) Contrast Calculation fomula
Contrast ratio
Brightness of whitewindow Area at the center of the screen
1%
Brightness of black Area
【 Note 】
1. For mass production test purposes, it is recommended to measure just 1 point,
P1 of Figure.-4 on display pattern of Fig.-3.
(5) Ambient Light : Dark Room (<2 lux)
1*
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
in
www.panelook.com
CONFIDENTIAL
SDI
6.5 Display Cell Defect Specification
In some cases, a panel may have defective cells that cannot be controlled.
These defective cells can be categorized into three types;
(1) Non-lighting cell defect : defect in which the cell is always off
(2) Non-extinguishing cell defect : defect in which the cell is always on
(3) Flickering cell defect : defect in which the cell is flickering
The display cell defect specifications define the allowed limits for display cell defects and are
used as the criteria in determining wether a panel is shipped.
Item
Non-lighting
cell defect
Nonextinguishing
cell defect
Flickering
cell defect
Total defect
Specification
Number of cell defects Distance between cell defects
z Zone A: 4 and less
z Zone B: 10 and less
z Zone A: 1 and less
z Zone B: 3 and less
z Zone A: 1 and less
z Zone B: 3 and less
Total number of cell defects
Zone A and B
is 12 and less
Regardless of A and B zone,
The Distance between cell defects is over 10mm.
(single R,G,B and Black)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...