Page 1
Level
7.
Disassembly and assembly Instructions
7-1.
Repair
2
7-1-1.
1
Disassembly
Carefully release the screws
at4different locations
Disengage the rear cover with the front
2
cover by using the hook
② ① ③
①
②
③
⑦
⑥
⑤
④
Torque
(
3
Separate the LCD connector, TSP connector
from the PBA.
1.1 ± 0.1
Be careful not to scratch cover
kgf.cm)(Size:1.4*3.5)
Follow the numbered sequence when you disjoint
Be careful to disengage number3hook
Release the screws at5different locations
4
from the PBA
Be careful not to damage the FPCBs
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
7-1
Torque
(
1.1 ± 0.1, '+'
type)(Size:
1.4*3.5)
Page 2
Level2Repair
7.
Separate the Shield Can from the PBA
5
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Page 3
Level2Repair
7.
7-1-2.
assemble
Put the Shield Can on the PBA
1
Screws at5different locations
2
3
Attach the LCD connector, TSP connector
Torque
(
4
Joint the Rear and the Front
1.1 ± 0.1, '+'
④
③
①
type)(Size:
⑦
②
1.4*3.5)
⑥
⑤
Be careful not to scratch cover Hook at the7points
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Page 4
Level2Repair
7.
5 Screws at4points
Torque
(
1.1 ± 0.1, '+'
type)(Size:
Be careful not to scratch rear cover
1.4*3.5)
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...